Change the language on my touch pro 2...
Today i both my touch pro 2 but it is in Italian language can i change it by installing a new rom? ( i tried installing custom roms but the unlock failed )
Hard SPL your phone BEFORE you change roms...
Fundamental rule that people with bricks seem to ignore....
But I can't hard SPL my phone... it stays at 0 % and then it shows and error and nothing
edit:
Or it says Loading... on the phone and again nothing happens
tonev said:
But I can't hard SPL my phone... it stays at 0 % and then it shows and error and nothing
edit:
Or it says Loading... on the phone and again nothing happens
Click to expand...
Click to collapse
edit2: And then it usually show me 260 error Connection error
how is it that you are ateempting to hard spl your phone? Hopefully you are doing it through active sync. Ensure you have the latest windows mobile device center version and that you unpack the Hard spl and running the correct option from there. Like ultramag69 mentioned, if you keep attempting to flash your device without hspl, you may have no device at all.
I am using sim unlocked htc.
My IMEI is PM me for this
sd card out, sim card out, phone on.
attempting to flash.
downloaded ,installed windows mobile device center
connects.
attempt flash with Rhodium-HardSPL_V2_00R3.exe
automatic flash doesnt work
attempt manual flash
picture of my phone comes up, instruction on flash come up, i agree, continue.
window comes up with 0%
phone screen is still showing 0%
after 6 minutes or so it comes up with UPDATE ERROR.
If you want i can make a video of what i am doing
Better if you eliminate your IMEI from post for security
Anyone help? i love my tp2 but I also want to customize it... at least to change the language...
edit
This is my first TP2 (device ) i have never flashed another htc before !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
I have O2's standard WM6 Rom on my XDA Orbit (with SDHC support installed by cab for my 4gb card) and, after performing a backup, I performed a hard reset in preparation for the install of the new Black & Blue V5 rom. However, it now sits on the boot up screen (see pic). It does this with or without the memory card installed and I have performed further normal and hard resets to no avail - it always sits at this point and goes no further. I left it for 30 minutes so I think it's safe to say there is a problem with it.
Any advice on how to resolve?
Thanks in advance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
have you installed the rom using the uspl file? if not, you have bricked your phone and there is no way to unbrick it yourself.
I haven't installed a Rom as of yet but I have installed USPL previously as I haven't always had the O2 Rom on this device. I had the Touch Vanilla on it at one point.
No, what has happened here is at the result of nothing more than a hard reset.
Any advice?
try 2 remove battery and insert back. try to do HR again
can U enter bootloader? if yes, download wm6 ROM again(o2 original) and follow instruction from wiki (How to flash using SD card)
can you get it to boot loader mode?
phsnake said:
can U enter bootloader? if yes, download wm6 ROM again(o2 original) and follow instruction from wiki (How to flash using SD card)
Click to expand...
Click to collapse
Yes, I can get into bootloader but my card is a 4gb and won't work by default as far as I know. Is there any way of doing it by USB? I have my cable connected with the bootloader screen on but it isn't doing anything and when I test it with USPL, it comes back with no device connected.
EDIT - ignore, just seen it can be done. Cheers for the replies all.
remove card at first, then enter btloader, and run Flash(o2 ship). dont do USPL directly - needs 2 install some certifikates before flashing.
Installed B&B V5 on it using bootloader and everything works fine now. Just a few issues with a few things on the restore using Sprite (caused by the differences between WM6 and WM6.1 I suspect) but nothing that couldn't be overcome easily enough.
Cheers for the replies everyone.
Hey every one,
I have the following problem with my dads new HTC one V...
The phone asked for a systemupdate so i did, but didn't read the instructions to carefully. (Overconfidend...) Actually though hm i'm so smart lets put in the charged incase it might take to long i get screwed.
Turn out that it SPECIFICALLY said to NOT do that. -_-'
"When the battery charged to 50%, I started the update process but left the “smart” phone connected with charger. After the phone restarted itself, it just showed a static green round arrow icon and no status or progress bar. After waiting for more 30 minutes, that scary motionless screen remained unchanged, looked like it’s hung or stopped updating.
Luckily I did take some screenshots of system update screen and sent to Gmail prior to the update process started. Here is the answer to the problem – avoid charging your phone during the update as it may interfere with the process
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After awhile i heard the startup sound of the phone coming from the other side of the room randomly... I checked the phone and saw that i rebooted. I could still enter pin code but now it randomly reboots!
Any help here?
---
Phone specs:
HTC ONE V
Android verz: 4.0.3
HTC Sence: 4.0
Software number: 2.09.114.1
HTC expansion: HTCextension_403_1_GA_5
pk76100 (under the sim cover)
try a factory reset...
(the only thing i can think of now...)
ryanlow134 said:
try a factory reset...
(the only thing i can think of now...)
Click to expand...
Click to collapse
In os under: settings-storage or in the bootloader? I have no root so i can still send it back...
Sent from my HTC Wildfire S A510e using XDA
samkuiper9 said:
In os under: settings-storage or in the bootloader? I have no root so i can still send it back...
Click to expand...
Click to collapse
"Factory Reset" is in the bootloader
regards
max
Hi guys, I've been scouring Google for 3 days now and can't come up with an answer, everything says use Odin for this and use Odin for that... well I can't.
A few days ago I downloaded an app from the Google store Linuxonandriod or something like that, it's pretty much an installer to place Ubuntu on your phone side by side with Android, the instructions began with rooting the phone, I began that process and believe I accidently loaded the incorrect pda to the phone (I have so many files now on my comp, I have no clue which one I selected). Odin rebooted the phone and that's that.
If I try to turn on the phone it goes to the first screen that just says SAMSUNG then turns off, never getting to the Samsung Galaxy III screen. The USB on the phone seems to have been botched, none of my computers will recognize it (Windows or Linux), the phone will not even charge. I can however get into both recovery and download modes without problem.
Naturally, download mode does no good because the USB is useless and I do not have clockwork mod installed on the phone to bypass the verification error.
I tried to simply install clockwork via recovery in hopes that would do something, but I get a verification error with that.
Is there anyway around this using the SD card or am I holding a $300 paperweight?
Thanks
Maybe try this-http://forum.xda-developers.com/showthread.php?t=2369125
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bilgerryan said:
Maybe try this-http://forum.xda-developers.com/showthread.php?t=2369125
Click to expand...
Click to collapse
Thanks, for the link. I did check it out, but couldn't figure out what the poster was talking about with drive letters and such. That dmesg | tail told me nothing about my sd. I unzipped everything to the card by a different method but my the computer still wouldn't recognize the phone, so booting back into windows did nothing.
Sorry for the delay in response, I've been extremely busy with work.
I'm still at a total loss on this.
Hey guys, got the following problem:
Important things first: I am from germany and I know that my english isn't the best, but I'll do everything I can for explaining everything, so you can understand me.
So, the problem is complex; please read everything^^.
I am proud user of my HTC One M8, and after months of "normal" using, I tried out several things like custom roms, storage encryption and such things.
The last custom ROM I was using is ViperONE.
On my One M8 there is S-ON, USB-debugging is deactivated, the H-BOOT version is 3.16.0.0000. (
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
, please excuse the quality).
There is a problem with the recovery partition/version --> when I want to boot into recovery, it opens H-BOOT.
Now, what happened:
I often tried to reset the smartphone: install a new rom, etc.
And with every try I became sad, because it failed.
It could not open the required recovery-mode. God knows why.
As initially mentioned I encrypted the storage, and on the decryption screen was written, that the smartphone will hard-reset after 30 times of incorrect password input.
I thought, it would be a good idea, to try that out.
But first, it seemed like the best thing to disable usb-debugging. I think, I been totally brain-afk.
So, I did this (disable usb-debugging, restart mobile phone, 30 times incorrect password input), and watching as the phone get doomed.
The phone starts into H-BOOT, thats it.
But... no, one more thing, my decryption password got changed.
I can do nothing for several months.
Funfact: After some search in blogs, asking google, etc. I found out that my only mistake it was, to turm usb-debugging off. If I haven't did that, there where no other problems.
Any ideas, what to do?
Do you know, what the decryption-password is now? I thought it could be null, so the password-variable is empty. But on this point, I have not idea, what I should do.
Please only write constructive posts, nothing like "customer service". If there is no chance, on saving the smartphone, it's ok, but please write, why you think, that there is no way.
Thanks a lot,
Sincerely, Dardassa
Hello there! Apologies for the vague thread name, I'm actually unsure what is wrong with the phone -long story short, I've bought it in CashConverters, thinking I could earn some (M9 for thirdy quid? bloody hell).
The phone does turn on, so I don't think it's hard-bricked. When the phone is turned on, it goes to this menu
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
REBOOT and REBOOT TO BOOTLOADER result in the same, as does turning it on after POWER DOWN.
After pressing BOOT TO DOWNLOAD MODE, this menu pops up, and pretty much goes back to the first one upon VOL UP or VOL DOWN.
BOOT TO RECOVERY MODE does work, and results in this menu
I have once attempted to "apply an update from SD card", it resulted in this, and decided not to test my luck.
Couple things to note, I do IT for a living, started working on it yesterday, 2pm - 2am, mostly reading through XDA and android pages, didn't manage to find a solution yet, and I'll stab myself with a spoon if I failed at searching.
My question is: can I fix it? Is it worth it?
You could flash a RUU.exe if its a tmobile, verizon, sprint etc. Other than that i dont know... You cant even see what firmware number you got
Roobwz said:
You could flash a RUU.exe if its a tmobile, verizon, sprint etc. Other than that i dont know... You cant even see what firmware number you got
Click to expand...
Click to collapse
I assume it's O2 because it says himauhl_o2_uk, plus an O2 sticker. Other than that, I don't know, as I can only access recovery, and literally got it in that state.
Edit: I assume it's caused by someone disconnecting the phone while updating through HTC Sync, but I am unsure.
I am having this same exact issue with my Sprint M9. I have tried installing the 0PJAIMG from the SD Card and no love. Get error E:footer is wrong signature verification failed.
Any help with this would be much appreciated.