HELP!!! My sghi780 seems not to have gps - Upgrading, Modifying and Unlocking

i bought samsung sgh i780. not from orange. the button which should start the gps is not mapped to any program.
there is no gps application, in the system there is just ext gps apps where i can set if i want to download the data (it deosnt work anyway).
as in the box was no manual, i downloaded it from german samsung site. there is written, that gps dont have to be available in all countries. im not sure if they mean gps hw or installed sw?
i know that in certain 780 the gps must be unlocked, but is it my case? is there a gps at all?
anybody can help me?

I have the same problems. No bloody manual, just a quick start guide.
GPS???

I finally made the gps work. Anyway, in regards of manual, I found it on the german samsung web (german/english version)

what is the solution ?

Related

Artemis problem with GPS

I have got here a upgraded Artemis and it just does not want to work properly with GPS. All the satellites are in the north point and it never gets a valid signal. I have already tried to flash it to the black & blue ROM but it still happens. The navi software i am using is TomTom 6.032.
Anyone got an idea what to do? It never works, not even on the street.
This fix is for SPV M650(ARTEMIS)
sdkcerts-run first
Kulbut0r GPS Quick and Dirty Fix for SPV M650 =second
after go to options=system=external gps
1 tab=com 4
2 tab=no com=baudrate 4800
3 tab=automat
in tom-tom=gps settings= try builtin resiever if not go to=other nmea device=baudrate 4800 or 9600=com 4
sorry for my bad engl
THIS FIX IS WORK IN ANY ROM!!!
BIG THANKS GOES TO KulbutOr from France!!!
Sorry for my bad english-I AM FROM RUSSIA
Also You can try this programm to reset your gps reciever
At first you need to go
after go to options=system=external gps
1 tab=com 4
2 tab=no com=baudrate 4800
3 tab=automat
After start this progr port=4=baudrate 4800=automat===reset settings
In This plase-contacts of your internal GPS antena
when you try to connect satelites try to push this place-may be your antena have no contact with plate....
Thank you, it works! Vovander80, if you like, we can speak Chinese. Cheers!
if you like, we can speak Chinese
Sorry only=Russian+Romanian+Moldavian+Ukrainean
With GPS of my SPV M650 I fought 2-3 weeks
I have more another program-but these basic = think this is enough
I have done all of that but nothing helps. I simply can't get my GPS to work. IT shows me that all the satellites are in the north position and that is about it. I have changed the firmware and i have used all the fixes recommended here including GPS reset with no success. When i connect my BT received it works fine but that is not the point of having inbuilt GPS
I really hope someone can help me to get this damn phone working. Would it work better with WM05? If so has anyone got a link to it?
Thanks again to everyone helping in here.
I haved some problem=one satelit in north!
my problem was in contacts of antena!!!
Try to connect outside antena(back side connector!) i think you have some problem like my
http://rapidshare.com/files/21643937/Artemis-Inside.zip
On 6 page at right+up side you can see your gps antena
On 9 page you can see your contacts(problema!!!)
Try to make good connection!!!
If you speak french:
http://forum.xda-developers.com/showthread.php?t=341952/#6
Otherwise, i'll explain in english cause I had the same problem:
I tried with the first Kulbutor patch (in my link)
If you install it just after the flash; there is no problem.
Moreover, if you are using Orange with AGPS, it works also. after having install the Orange.cab
Be carefull you must wait this (or these) install(s) before running tomtom; otherwise, it won't work
Hoping it will help you,
Regards
Thanks for the help. There is no Link in your Link. The link does not work at all. Please repost it. Thanks
Modified with right link
GPS problem with GPS cam
Hello,
I just installed the artemis touch 4.02 WWE on my XDA I orbit. Everythings works fine, also Tomtom and visualGPS. But the GPS cam seems to be not able to start built in GPS when launching camera for GPS photo. The first time when I started the GPS cam, a pop up appeared with message "initializing GPS" or something like that, and I cancelled it by tapping cancel button. Now GPS cam is not working any more. Will this fixes solve my problem?
Thanks a lot in advance.
Up!
Theme is opened!

[Samsung i780] GPS cannot fix on any satelites

Hi,
I am new here and just bought an i780 in S'pore 4 weeks ago, running on i780DXHD1 (Radio + PDA). I have been trying to use the GPS for weeks using the bundled NavFone but it always could not fix on any satelites. In the signal strength, there is no single bar appear. I tried MapKing, it is the same. When i checked on MapKing GPS data stream, it is always empty. when i checked on the dailpad, the GPS logo is active(not crossed). When i turn off the GPS application, the GPS logo is inactive (crossed). With this, can i assume the GPS hardware is working? But why no data stream? I have tried turning on XTRA, but it is the same. Below is my configuration:
[NavFone]
Software Port GDP1:
Hardware port COM9:
baud 4800
Windows managed: yes/checked
[MapKing(trial)]
Software Port COM8:
Hardware port COM9:
baud 4800
windows managed: yes/checked
Please help.... Thanks!
co6ra said:
Hi,
I am new here and just bought an i780 in S'pore 4 weeks ago, running on i780DXHD1 (Radio + PDA). I have been trying to use the GPS for weeks using the bundled NavFone but it always could not fix on any satelites. In the signal strength, there is no single bar appear. I tried MapKing, it is the same. When i checked on MapKing GPS data stream, it is always empty. when i checked on the dailpad, the GPS logo is active(not crossed). When i turn off the GPS application, the GPS logo is inactive (crossed). With this, can i assume the GPS hardware is working? But why no data stream? I have tried turning on XTRA, but it is the same. Below is my configuration:
[NavFone]
Software Port GDP1:
Hardware port COM9:
baud 4800
Windows managed: yes/checked
[MapKing(trial)]
Software Port COM8:
Hardware port COM9:
baud 4800
windows managed: yes/checked
Please help.... Thanks!
Click to expand...
Click to collapse
co6ra,
First off, you need to stand in an open space before you activate your GPS. I uses Agis software too, and based on my experience when you use it the first time, the signal tends to get a little longer than usual. At times, it can even be over 10 minutes before I get a signal.
To assist your time to get the signal, I would advise you to use the Enhanced GPS found in your settings>system. Clicked on the enhanced gps and select Enable in the XTRA Enable. There is no need to select Auto Download (that is, Disable).
This would mean that the device will also use the base stations to assist in finding the location of your device. Of course the downside to it is you will incur GPRS charges.
Try it and see if you can get the signal.
Deleted....
g00ndu said:
co6ra,
First off, you need to stand in an open space before you activate your GPS. I uses Agis software too, and based on my experience when you use it the first time, the signal tends to get a little longer than usual. At times, it can even be over 10 minutes before I get a signal.
To assist your time to get the signal, I would advise you to use the Enhanced GPS found in your settings>system. Clicked on the enhanced gps and select Enable in the XTRA Enable. There is no need to select Auto Download (that is, Disable).
This would mean that the device will also use the base stations to assist in finding the location of your device. Of course the downside to it is you will incur GPRS charges.
Try it and see if you can get the signal.
Click to expand...
Click to collapse
Hi,
Thanks for your reply. For the past 4 weeks, i have been trying all sort of methods; standing at my aprtment balcony, in an open field, in a bus, windows seat, etc. all with at least 30 minutes. When i was at home, i stood at the balcony, turn on my wifi, and kept downloading the XTRA. Sometimes, i cannot see any bar at all; sometimes, i saw a lot of bars, with different PRN number, but all empty (strength 0), and kept changing, but still no fix...
help....~~
i have the same problem too until I download a software call GPSgate, there after I am uable to use my gps, I do not have the link , try seaching on the web.
vincal said:
i have the same problem too until I download a software call GPSgate, there after I am uable to use my gps, I do not have the link , try seaching on the web.
Click to expand...
Click to collapse
I thought GPSGate is some kind of port sharing program? Both NavFone and MapKing is able to connect to the GPS unit, it just could not fix. Is it possible that the GPS is locked?
Anyhow, will try on GPSGate later. What is the recommended configuration?....
Thanks!
Installed GPSGate, and found that now MapKing is able to connect to the port and receive data. When i check on the GPS stream, it always appear to have the first line with data(some figures deliminated with ","), but follows by a few line with empty data (no figure, but a lot of ","). When i checked GPSGate, the status of the input port is always "GPS data but no position". I have tried just now in an open space, clear night sky, for at 40 mins, it still cannot fix on any satelite....
Help!...is this something to do with hardware?
Hello,
I've got the same pb. No gps fix and no satellite. I've tried with gpsproxy, portsplitter. No way : no signal...
My phone version :
PDA : i780dxhe1
PHONE : i780puhe1
Rom : EFN WM6.1 - 3.3XG
alex16s said:
Hello,
I've got the same pb. No gps fix and no satellite. I've tried with gpsproxy, portsplitter. No way : no signal...
My phone version :
PDA : i780dxhe1
PHONE : i780puhe1
Rom : EFN WM6.1 - 3.3XG
Click to expand...
Click to collapse
I just tried gpsproxy, it still does not solve my issues.
Where did you buy your unit? I am thinking of sending back to samsung. If i am sending back, this will be the first and last samsung unit that i am using...
co6ra said:
I just tried gpsproxy, it still does not solve my issues.
Where did you buy your unit? I am thinking of sending back to samsung. If i am sending back, this will be the first and last samsung unit that i am using...
Click to expand...
Click to collapse
Since you have not flashed to any custom rom (I hope you did not) why not send your device back to the SSC and lodge a complain that the GPS is not working at all.
If they say nothing is wrong, ask them to demonstrate that the GPS is able to lock in the signals.
I know it is frustrating to have features and yet not working. It can be a case of hardware issue. Let's see how the SSC can help you, since yours is still under warranty.
I wish you would be able to solve your GPS issue. i780 is still a great phone. Let us know how it goes, okay?
ya...i am travelling now and expect the GPS to work....should have not trust it will work out from box. will visit the SSC when i am back to S'pore 3 weeks later....
co6ra said:
ya...i am travelling now and expect the GPS to work....should have not trust it will work out from box. will visit the SSC when i am back to S'pore 3 weeks later....
Click to expand...
Click to collapse
In the meantime, just keep on trying, if you have time to spare. Who knows? You might have it resolved by then.
All the best... And good luck...
hi,
I just enable the log in NavFone and here is how it looks:
$GPGSV,2,1,05,07,20,040,,26,68,205,,04,00,111,,14,37,310,*75
$GPGSV,2,2,05,25,23,045,*4B
$GPGGA,,,,,,0,,,,,,,,*66
$GPRMC,,V,,,,,,,,,,N*53
$GPGSA,A,1,,,,,,,,,,,,,,,,*32
$GPVTG,,T,,M,,N,,K*4E
$GPGSV,2,1,05,07,20,040,,26,68,205,,04,00,111,,14,37,310,*75
$GPGSV,2,2,05,25,23,045,*4B
$GPGGA,,,,,,0,,,,,,,,*66
$GPRMC,,V,,,,,,,,,,N*53
$GPGSA,A,1,,,,,,,,,,,,,,,,*32
$GPVTG,,T,,M,,N,,K*4E
$GPGSV,2,1,05,07,20,040,,26,68,205,,04,00,111,,14,37,310,*75
$GPGSV,2,2,05,25,23,045,*4B
$GPGGA,,,,,,0,,,,,,,,*66
$GPRMC,,V,,,,,,,,,,N*53
$GPGSA,A,1,,,,,,,,,,,,,,,,*32
$GPVTG,,T,,M,,N,,K*4E
$GPGSV,2,1,08,07,20,040,,26,68,205,,04,00,111,,14,37,310,*78
$GPGSV,2,2,08,25,23,045,,22,28,187,,12,37,299,,13,49,299,*7A
$GPGGA,,,,,,0,,,,,,,,*66
$GPRMC,,V,,,,,,,,,,N*53
$GPGSA,A,1,,,,,,,,,,,,,,,,*32
$GPVTG,,T,,M,,N,,K*4E
According to http://gpsinformation.org/dale/nmea.htm, GGA is one of the most important stream to provide location data. From the log, it seems like the GPS is not able to calculate the current location at all? What is wrong with the GPS unit???...
Ya...i have been trying to put the GPS on everytime i am outside, in total, i think i have tested no less than 10 hours, but still no luck....
co6ra,
From the looks of your log file, it seems that your GPS chipset might not be working. Those coordinates that you have should come from the base station of the phone.
I tried it indoor, and it seems that there are satellites showing, but just could not get a fix on it too (But then, I was indoor).
Your log file might be useful, especially when you bring your unit back to SSC for service.
P/S: My settings are as follows:
Enhanced GPS XTRA is enabled but Auto Download is disabled.
When running NavFone, my settings are as follows:
Don't worry about the external GPS settings, just leave it as it is.
I will feedback later when I am on the balcony. Please be patient.
Update:
Log of my GPS Data:
$GPGSA,A,3,13,17,20,23,,,,,,,,,,7.5,4.6,5.9*15
$GPVTG,,T,,M,0.0,N,0.0,K*4E
$GPGSV,3,1,12,07,66,357,,08,28,336,14,11,68,046,18,13,42,213,20*7C
$GPGSV,3,2,12,17,24,257,27,19,07,028,,20,24,143,30,23,27,175,25*7A
$GPGSV,3,3,12,25,81,061,,27,55,338,15,28,04,315,17,32,13,119,18*76
$GPGGA,095555.0,0119.614273,N,10352.209341,E,1,04,4.5,38.5,M,,,,*39
$GPRMC,095555.0,A,0119.614273,N,10352.209341,E,,,150808,,,A*67
$GPGSA,A,3,13,17,20,23,,,,,,,,,,7.5,4.5,5.9*16
$GPVTG,,T,,M,0.0,N,0.0,K*4E
$GPGSV,3,1,12,07,66,357,,08,28,336,14,11,68,046,18,13,42,213,22*7E
$GPGSV,3,2,12,17,24,257,28,19,07,028,,20,24,143,30,23,27,175,25*75
$GPGSV,3,3,12,25,81,061,,27,55,338,15,28,04,315,17,32,13,119,18*76
$GPGGA,095556.0,0119.616592,N,10352.210679,E,1,04,4.5,44.5,M,,,,*3D
$GPRMC,095556.0,A,0119.616592,N,10352.210679,E,,,150808,,,A*68
Yes, what you said is true, the GGA data is the coordinates of your device and determine your location.
I have sent the same log to Agis and Samsung via emails. Waiting for their reply. Hopefully they can solve this by next week, so that i can use it when i need it most as i am travelling to Malaysia now.
BTW, do you guys think that this might be a locked GPS? Anybody has any ideas? If so, how to unlock?
Locked? what do you mean? It shouldn't be and it should work right out of the box.
i am not sure also...read few article on locked GPS topic, which they key in a code to unlock/activate the gps unit.
No luck. Samsung Singapore support does not even want to reply to my email....
Just happen that one of my colleagues travelled to my local office. Has switched back to my old BenQ P50 and let my colleague to bring down the unit back to Samsung S'pore. They claim that it might be a software issue and saying that they are going to flash the latest ROM to see if it helps.
g00ndu said:
Locked? what do you mean? It shouldn't be and it should work right out of the box.
Click to expand...
Click to collapse
Hi,
I notice that u r using the cooked ROM. Did you backup the original ROM before flashing the cooked ROM? If so, how do you backup?
alex16s said:
Hello,
I've got the same pb. No gps fix and no satellite. I've tried with gpsproxy, portsplitter. No way : no signal...
My phone version :
PDA : i780dxhe1
PHONE : i780puhe1
Rom : EFN WM6.1 - 3.3XG
Click to expand...
Click to collapse
I went through this same thing, I now have Tomtom7 running perfectly and getting a fix in seconds.
It is highly important that you have a working Sim card, correct GPRS or EDGE settings and that XTRA is Enabled!
Use GPS Gate stock settings! ie. prior to running GPS Gate goto External GPS and select com2, then run GPS Gate and use the wizard and let it find Com2.
GPRS/EDGE should try to connect automatically if not then switch it on, exit and restart GPS Gate. Be patient on the first fix it can take 5 mins, it should not take this long though.
Wait until GPS Gate shows that dark green icon in app tray and has a valid position, once it does then execute your GPS software and use (Franson Virtual com 1) default comport generated by GPS Gate.
GPRS/EDGE can be turned off after GPS Gate shows that it has your position and this need only be done once. This has worked on Omnia after many many hours of failure and frustration.

How to set up the GPS

Hi I've got a BlackStone but I can't make the GPS go right!
Which COM should I choose, Which rate? 4800? and in which place: Software or Hardware?
Finally what's the config for googleMaps?
Thank so much...
DassaultMirage said:
Hi I've got a BlackStone but I can't make the GPS go right!
Which COM should I choose, Which rate? 4800? and in which place: Software or Hardware?
Finally what's the config for googleMaps?
Thank so much...
Click to expand...
Click to collapse
try com 4, rate 9600.
Forgive me if I understood your problem wrongly. While the HD has built-in GPS it is not supplied with any software or app associated with it for navigating or even for displaying coordinates or compass navigation.
Once you download the Google Maps (which also supports, for some countries the street map display) application onto your device, it will make use of the GPS and show you your position, with moving map display as you drive, quite smoothly and accurately. It will also show your approximate position indoors without GPS (using A-GPS and the cell site ID supporting LBS).
For point to point navigation and voice prompts guess one has to use 3rd party app like Garmin XT, TomTom; but I have not used these.
genesicgaogaiga said:
try com 4, rate 9600.
Click to expand...
Click to collapse
yes but in the software or in the hardware field?
You need to state what software you are using. If its Google maps just let Windows manage the GPS.
Why doesn't the GPS Photo work. It says that GPS is not active or something. What's up with that?
genesicgaogaiga said:
try com 4, rate 9600.
Click to expand...
Click to collapse
Thank you, but it doesn't work so!!! What's wrong???
I had the same problem, no one can't help me. Any gps software I used couldn`t find gps reciver, I've tried any combinations with COM ports....nothing. After 1 month and about 10 gps software I removed SIM card....and BINGO!!!! My old SIM card generate problem that nothing can find built-in gps reciver in my Touch HD. Try without SIM card and if it works go to operator and replace to new SIM card
Endow
Not at all
Sorry about this, but your tips does'nt help me:
I removed the SIMcard but the GPS in GOOGLEMAP didn't work anyway!
I tried to let it be managed by windows and to set it on COM4 with 9600bauds but no options succeded!
I can't understand what's wrong!!!
Another thing
Furthermore, when I set up the GPS-params in the params-application of windows mobile 6, the hard port (COM4) I chose isn't recorded by the software!!!
Maybe it's a hint for the answer?
Help me, geeks of HTC!
go to google and download the lastest ver. google map.
try to go to a window or a open space and turn on the google map. press option and try to click use gps , and see any reading on the top right of the map screen.
dont need to adjust any com 4,5,6 things.
once you got a lock on gps. you can close the google map and start to look out for third party nav software. try it.
Mine works perfectly fast at
COM: 4
BAUD: 57600
Im using iGuidance 2009
does ur phone need to go online when activating the gps? my car's gps doesnt need online yet the device can detect its location. however when i use google map, the phone just went online and try to search for my location. not too ideal as i have to pay for every kb sent/recieved.
Ooo
Maybe I will try to refresh the GPRSSettings with the soft designed for it!
I will reply when I'll know further about it...
Mine shows correct location when I set port - Com4 and BAUD: 57600 on Google maps for just a second. Then it jumps to some other continent and says GPS not available and shows the help dialog. Allowing windows to manage gps also gives same results what am i doing wrong?? or is it a limitation of blackstone/google maps app..
Reply
I've tryed what you done but it didn't succeded!
In the GMaps List I see: "COM4:" and there is nothing after the ":" !
When I confirm this update, the soft tell me that he can't found a device on this COM!!!
ok, my settings, com4, bd 4800, let windows manage (which kinda negates any settings before hand) Google maps set to let windows manage. My GPS locks well and always finds plenty of satalites, so i dont understand why you guys are having problems.
Howver, on my polaris with cooked rom, my google maps does misbeahve sometimes when the gps is locked and the map will suddenly say im in hong kong when im in the uk!! (i even unistalled google that was included in rom and downloaded new version from google)
So i believe in my limited wisdom that its probably a rom issue (radio more likely).
What i do have to decide is if the official 1.56 rom is worth flashing or not (still on 1.14)
What you guys think?
Reply
I'm not sure to understand you because I come from Switzerland and I main speek French.
YOu think that it is a ROM version's problem? Which one should I install? (and how to do it ?)
Thanks so much!
P.S.: I don't have changed any ROM or Radio Version in this HTC Touch HD!
I have never fiddled with ROM but I have same issue. google maps jumps continent!! momentarily despite 7 satellites. May be an issue with Google maps itself??
timmymarsh said:
Howver, on my polaris with cooked rom, my google maps does misbeahve sometimes when the gps is locked and the map will suddenly say im in hong kong when im in the uk!! (i even unistalled google that was included in rom and downloaded new version from google)
So i believe in my limited wisdom that its probably a rom issue (radio more likely).
What i do have to decide is if the official 1.56 rom is worth flashing or not (still on 1.14)
What you guys think?
Click to expand...
Click to collapse
timmymarsh said:
ok, my settings, com4, bd 4800, let windows manage (which kinda negates any settings before hand) Google maps set to let windows manage. My GPS locks well and always finds plenty of satalites, so i dont understand why you guys are having problems.
Howver, on my polaris with cooked rom, my google maps does misbeahve sometimes when the gps is locked and the map will suddenly say im in hong kong when im in the uk!! (i even unistalled google that was included in rom and downloaded new version from google)
So i believe in my limited wisdom that its probably a rom issue (radio more likely).
What i do have to decide is if the official 1.56 rom is worth flashing or not (still on 1.14)
What you guys think?
Click to expand...
Click to collapse
I have the same problem. I have already donwloaded the 1.56 rom and the uspl but cant seem to decide to flash or not.

HTC Artemis - GPS missing

I have an Artemis (T-Mobile) which I have unlocked and running on O2 OK except for GPS.
This was working before (when on T-Mobile). Now the GPS button is not linked to any program and I can't find any reference in any files to GPS.
How can I re-install the GPS facility?
Any advice much appreciated. Thanks for reading....

T32 GPS Rom (Daxian)

I am opening a new thread because nobody replied to the gps issue some people have after flashing the Daxian t32 gps version phone with the "Dixian_x999_T32.zip" file.
(forum.xda-developers.com/archive/index.php/t-390574.html)
Does anybody know how to activate the internal gps?
Does anybody have a rom that works with the gps version of that phone? - That would be great!
I tried several gps drivers (gpsmod and others) and none worked. I tried some standalone applications to talk to the gps as well as TomTom7 and google maps and none worked.
Somehow the gps connects to the satellite and gets the correct time stamp (TomTom with gpsmod driver) but it does not get any coordinates.
Is there a missing entry in the registry that activates the gps?
Help is appreciated, somone has to know how!
petevol
(Administrator: donĀ“t shout at me for opening a new thread with a previously discussed topic )

Categories

Resources