Develop Bugs

microsoft voice command

is anyone know where can i buy the program in uk i did try in handango but they said not for sell in this country.thanks

It is not posible outside EEUU, I asked handandgo by email and answer it was forbiden by Microsoft.
Try Fonix software it works really well.
www.fonix.com
Cheers

If you have an XDAII, then you can get a fully working version of it with the official o2 UK 1.72 upgrade. I don't use it very much as I always feel an idiot saying the name, then normally having to confirm it before dialing, when I can just as easily go into speed dial or call history etc.
However, when I have used it it works a treat.
Cheers
Anthony

I use Fonix in the car all the time and its works great for me.
I found that Voice command recognised the contact I wanted 95% of the time, but then didn't recognise me saying 'yes' to confirm it.

In my case, Fonix does not always recognize my 'NO' command... :S
But still it's a great contender for MS VC....
By the way, is there a way to avoid Fonix to change my microphone AGC setting? It always changes it to AGC OFF, thus the recognition gets affected drastically, however when AGC is ON I get 98% success rate!
TIA,
Rayan

what version of Fonix voice dial are you using. I used the first version with my XDA1, this worked wonderfully.
I have found that the 2.0 version doesn't have a UK voice (the us ones are a bit odd). In addition i have noted the recognition does seem poor and it doesn't repeat the contact, just says "your contact"!!
Any ideas / help always welcome!

voice commands
hi,
you don 't really have to buy this software, you can download it probabely from following site: www.suprnova.org

I'm using the latest version (2.0)...
The weird thing is that it does not always change the AGC Setting...
I have not found a pattern, it seems more like random...
:roll:

Jabra BT800 fix, MAYBE

Try this???? Came with my new I-Mate PDA2 extended rom.
This may only work on the Alpine and it may mess up your Himalaya or any other device...
USE AT YOUR OWN RISK AND DO NOT COME *****IN TO ME IF YOU BREAK YOUR PHONE! :twisted: :evil: :shock:

I installed this thinking that maybe it would show the NAMES on the Caller ID display.
Instead, now it doesn't show ANYTHING - Not even the number.
I have a Blue Angel device, if that helps.
Thanks,
IceCream

bt800
If you are geting caller ID only on your device, consider your self lucky. You need no fix.
On the Himalaya, you need 2.20 and Hands Free mode just to make it work a little! :twisted:
Names will never be displayed unless Jabra updates the firmware.

I tested it out all day and found one nice thing..
When you press the button to answer a call, it ACTUALLY DOES.
Only had to press it one time, as well.
Now I am torn between having the number display, or having the answer "feature" work. ;-)
-IceCream

On the Blue Angle, is it a MS stack or Broadcomm?
If MS, the update fix will not work. If Broadcomm, it may.. The I-mate pda2 uses Broadcomm.
If you have MS stack, you need to pair in Hands Free mode. Headset mode will not work, it will give you a LONG delay befor it answers and NO caller ID.
On the Himalaya, the BT800 only works under the 2.20 Translated ROM.. NOT 2.02 or 2.06. On the 2005, it works fine.
However, I have not tried the "fix" from I-mate for the PDA2 on the 2.20 or 2.06 or 2.02. The 2.02 or 2.06 will never work because the Hands Free Profile does not work right. The mic does not work with 2.02 or 2.06 and it has a stero affect from the speaker and mic still working on the phone.. (only sound on the device of the BT800 or any other device)

icecreamguys said:
I tested it out all day and found one nice thing..
When you press the button to answer a call, it ACTUALLY DOES.
Only had to press it one time, as well.
Now I am torn between having the number display, or having the answer "feature" work. ;-)
-IceCream
Click to expand...
Click to collapse
BTW, you are deleting it from both the device and the phone, and rebooting BOTH, and then re-pairing it, right?

BTW, you are deleting it from both the device and the phone, and rebooting BOTH, and then re-pairing it, right?
Click to expand...
Click to collapse
Yes, I did.
Thanks,
IceCream

Hi guys!
As wrote before in many other threads....caller id function in my Jabra 800 works as you described (only number but not name). Truthfully I can live without it....but the main problem is that it takes about 4 or 5 times to press answering button before I can hear my opponent. Also it takes about 2 seconds to conect.
That's really my biggest problem.
So, I wonder if this fix file can help me.
I have Qtek 9090 with Dangard rom 1.40.147 and 1.12 radio (bt 3900).
Please help, cause don't want to litter my PDA with unnecessary fix cabs.
Many thanks.
Leo.

As with all testing, use sprite back up or sunnysoft back up before you try anything. If it does not work, REWIND!!! :lol: :lol: :lol: 8)

Same situation here.
Repeat: use Qtek 9090 with Dangaard ROM 1.40.157
BT 3900, Jabra BT 800. Used this cab. Nothing broked. :lol:
But, now answering option works fine, exept - I can't here number on the BT device :lol:
Really cool :lol:
So, best way to wait for new cab fix, which will help to see number on the Jabra's screen.
:lol:
Anyway thanks.
You are MAN!

Sorry, tested little bit more and found out that Fix cab didn't help.
Now also I can't here numbers. :evil:
Anyway, today I'm going to reflash PDA with new ROM.
Hope that Jabra customer service will actually help us.
:?

8525 + Jawbone + 3 seperate ROMS = No Sound!!!

Now before anyone goes bashing me for not searching the forum, lemme tell everyone, I've done just that. I just haven't found the answer to my problem.
I recently acquired an 8525 (which I'm loving BTW ). I have a Jawbone headset that pairs up fine with all of my phones (BB Pearl, 8125, & 8525). Only problem is, I can actually *use* the Jawbone with my Pearl and my Wizard, just not my Hermes.
I've paired, deleted, and re-paired again but to no avail. I've tried to get an actual conversation going using 3 different ROMs: AT&T's official WM6, Schaps 4.30 Full, and vp3G's 3.62 Full, but nothing works. I've reset the Jawbone more times than I can count, and I still can't use it.
ANY input on this would be GREATLY appreciated, since I actually *need* to use it for work...

BombaMyte said:
Now before anyone goes bashing me for not searching the forum, lemme tell everyone, I've done just that. I just haven't found the answer to my problem.
I recently acquired an 8525 (which I'm loving BTW ). I have a Jawbone headset that pairs up fine with all of my phones (BB Pearl, 8125, & 8525). Only problem is, I can actually *use* the Jawbone with my Pearl and my Wizard, just not my Hermes.
I've paired, deleted, and re-paired again but to no avail. I've tried to get an actual conversation going using 3 different ROMs: AT&T's official WM6, Schaps 4.30 Full, and vp3G's 3.62 Full, but nothing works. I've reset the Jawbone more times than I can count, and I still can't use it.
ANY input on this would be GREATLY appreciated, since I actually *need* to use it for work...
Click to expand...
Click to collapse
I am currently using my Jawbone with Schnaps 4.01 Lite rom and no problem. Before that I have been using all of Matt's Pandora Kitchen roms, right up to the latest and never had a problem. I ran Schnaps 4.30 Full rom too, but really can't remember if I used the Jawbone during the testing time. If someone else can't help I can flash that rom again and test the Jawbone with it too. Let me know ho wit goes.

works with vp3g3.62. no issues, didnt require anything special. Does bt radio on your 8525 work?

I have an 8525 running Schaps 4.30 with radio 1.48.00 and mine is working. I did however have to return one Jawbone because it would connect and I could hear the conversation but the mic didn't pick up my voice. I tried that one on my wife's razor and it had the same symptoms though. What radio are you running?

Using with TNT's latest ROM and no problems, however not real impressed with Jawbone so far. Most people I call say it sounds "tinny".

mthomas said:
works with vp3g3.62. no issues, didnt require anything special. Does bt radio on your 8525 work?
Click to expand...
Click to collapse
AFAIK, the BT radio works. Like I said, I can pair up with it just fine, and even see the other BT-enabled phones/devices at my job. I just can't get any type of audio from my JB. I'm currently using vp3G as well.
UPDATE: Well to be on the safe side, I tested my Jawbone on a couple other phones; sure enough it's working fine, so it's got to be something up with my poor Hermes... Any advice?

Mine Jawbone Works fine also. I remember when I first got it I was having trouble with my sound. I remember changing the audio bitrate from 48 bit to 44 bit in the advanced config utility 1.1 Also try changing the stereo setting to mono.
May help you out, hope so.

Just a quick update: I reflashed vp3G's 3.62 ROM, reset my JB and repaired it; same effect, nothing. Just to be on the safe side I paired the JB with my Wizard, BB Pearl, and a couple of phones at my store and it works as it should.
@ mthomas: I'm using 1.48.00 for my radio. Since you and I seem to have the same type of setup, did you install any other cabs that help your BT out?

Do you have another Bluetooth headset to test. Even thought it can pair ok, it only means the "data" channel is working. The problem could easily be the voice channel which is not working. If possible, may be borrow another headset to try.

That's my next idea. I think I have an old Plantronics I can charge up and test out...

*BUMP!*
Gotta keep this fresh. Funny thing I noticed though: when I have the Jawbone connected and the phone rings, I still hear it's little tone in my ear, but no audio comes or goes through. No registry edits have been made; I've even done a hard reset, re-paired and tried again, to no avail.
C'mon you guys! Why am I the only 8525/Jawbone user around here that *can't* use his Jawbone??? Help me out here...

wish i had the answer. im using the most current att radio 1.54.07.00. how did your device work w/ another headset?no additional tweaks

Okay, now I'm getting pissed.
I tried using my old Plantronics 320. It pairs fine with the Hermes, but making phone calls is a no-go.
The only thing I removed (from anyone using vp3G's 3.62 Full) was Sleuth's PTT Fix; I need PTT more than being able to re-map the button. So I doubt this is the culprit.
WTH can't I use my good Jawbone with this thing?!?!

Quick *bump*

Same Problem
I have tried everything, I can hear the calls just fine but no sound from my mic. I have paired with other phones & it works fine. Please let me know if you find a fix!!

UPDATE: I tried using a Moto H700 and a Plantronics 340-no dice. Now I'm starting to think if it's a BT stack issue...

Now I'm completely stumped. I just flashed back to the original ATT WM5 rom, paired up, SR, then made a phone call to my 8525 from my house line. Jawbone rang in my ear, sure. I answer the call, no sound.
Could there be a problem with my BT radio? And if there is, how can I be sure/troubleshoot it?

Just throwing someting into the pot. have you tried unpairing it with your other phones? I know i was trying to pair my to my wifes and it would work because it was paired to my phone. Try deleting the relationship between the other phones. Other than that if its new enough just take it back and get another

myv6mustang said:
Just throwing someting into the pot. have you tried unpairing it with your other phones? I know i was trying to pair my to my wifes and it would work because it was paired to my phone. Try deleting the relationship between the other phones. Other than that if its new enough just take it back and get another
Click to expand...
Click to collapse
Good thought... But I already did that, still no joy. In fact, I just flashed over to HTC's official TyTN rom, and still nothing. I'm going to call a friend of mine and see if I can get it to work on their 8525. Here's a good ? tho: Should it matter if it's Cingular or AT&T branded? Are there any differences in hardware between the two types? Or could it be a faulty BT radio? I'm racking my brain trying to figure this out.
Worse comes to worse, I'm sure I could exchange my Jawbone; I *do* work for AT&T so it should be okay...

Okay, here's another question: If I were to flash *ALL* the way down to the original Cingular shipped ROM, RUU_HER_Cingular_1.34.502.1_1.16.00.00_wwe_cws_ship, would this have any effect on the BT stack? I'm only asking because I can't seem to find any type of information about replacing the built-in stack (outside of the Widcomm project and that's too beta for me ATM), and I still can't understand why so many headsets that I've tried with this damned 8525 don't seem to work, but so many people here @ XDA can use theirs. There's no differences between the Cingular branded and AT&T branded models (at least hardware/software-wise), and if I pair up my trusty Jawbone with another 8525 (AT&T branded, btw), it works fine.
I know I've been going back and forth with this, but I did pay a good amount for my 8525 and I don't want it to be partially or mostly functional. Hell, if my poor Wizard can handle my Jawbone, why can't my Hermes?
BTW, thanks for all of the suggestions you guys have given me to help me with this problem. Even though none of them have worked, I still need to give props where they're due.

WM 6.1 and MS Voice Command 1.6

Anybody get this working? If so, what hacks did you have to use? Would be really interested to know this. Thanks.
Jim

I am running RanDomIze WM6.1 and it works fine, even with Bluetooth headset. No hacks needed

f you need to hack, as Pays 6.1 I needed them and Schaps 6.1 I didn't, Here is one of them, the other is too big to upload but here is the name..MSVC_1.60_WM6_8525

I'm using Schaps and I think I need to try the hack. I'm getting the notifications and rings through the handset not my BT. I'm using a Plantronics Voyager. Will try the hack. Oh, and I am using the new VC that was published in October.
Thanks,
Jim

OK I got it working...sort of.
Using the MSVC_1.60_WM6_8525 file, I got notifications through BT. BUT it only gives me one notification then it stops. But the caller still hears ringing. Not sure if this is a nuance or an issue with my BT.
Thanks,
Jim

Newb-Tech-Realtor said:
OK I got it working...sort of.
Using the MSVC_1.60_WM6_8525 file, I got notifications through BT. BUT it only gives me one notification then it stops. But the caller still hears ringing. Not sure if this is a nuance or an issue with my BT.
Thanks,
Jim
Click to expand...
Click to collapse
I use one titled msvc 1.60 all working, or something real close to that.

I am using both and mine works fine

Voice Dialing over Bluetooth?

I haven't seen this mentioned but has anybody been able to use a BT headset to make, receive, and control calls? I can't. I get "this feature isn't supported on the connected phone" from my Blueant Q2. I know this was an issue with the Sensation and tried installing the voicedialer.apk but the phone won't allow it to be installed. I installed Vlingo but it crashes the phone and I have to do a reset to get it back. Thoughts? Experiences?
Update. We're apparently screwed. There's no native voice dialer included in ICS. I found one that installs but it loses its connection with the headset as soon as it starts. The folks on the Vivid forum are having the same issue. I tried the apps they discussed but they didn't work either. So I guess we wait for HTC to do something.
http://forum.xda-developers.com/showthread.php?t=1562886

BarryH_GEG said:
I haven't seen this mentioned but has anybody been able to use a BT headset to make, receive, and control calls?
Click to expand...
Click to collapse
Yes... ish
I posted the same question a few days ago, but I got no reply, so I bought the phone anyway and tried. Vlingo sort of works with my jawbone earpiece. What I do not like at all is the fact that it does not confirm the command before dialling, or at least I did not figure out how to set it up properly, with the result of dialing the wrong contact in case of a misunderstanding.
I am really missing the simplicity of the blackberry voice dialler, amongst other things (mostly due, I guess, to my being a newbie with android). It was a no-brainer, whilst all the solutions I have seen for android are slightly more cumbersome.
Thanks to the other thread you linked I think I am going to try cyberon voice commander. I could save a couple of dollars/euros buying their voice dialler, but as far as I can see it needs training to attach voice tags to contacts. I don't like the idea of spending time to do that.

This seems like such a basic feature these days, why the hell hasn't it got it?!!!

this is very disappointing news. all the reviews i looked at mentioned voice dialing as a feature. and i just ordered a blueant q2. just tried using voice dial on my phone menu. awful.

i found a retail site online that says the blueant q2 is not compatible with the htc one x and identified several other bluetooth items (including blueant) that are. i decided to try the jawbone era and have it on order. not as many desirable (to me) features as the q2, but if it works, it will be a step up from nothing.
online site is htcpediadotcom. i don't know how reliable it is; first time i've looked at it.

I only just noticed yesterday that the phone would not send the bluetooth connection to the head unit in my car, even though it was connected to it.
I had to use the phones loudspeaker....
All of the Android phones in the past 2 years have worked fine!