Hi, guys~~ I've a T-Mobile mda compact 3. I think it should have gps function. But it seems doesn't work. So, I wanna make sure if it has the gps function first. Anyone know an accurate way to test if my device have the gps function?
Plz help~~ Thank you very much~~
GPS Working
Hi mate, download a program called crux_view. I have the program and it's only an .exe file so i'm not sure how to upload it, when i tried no attachment.
You just put the exe file on your ppc and run it. It will then test your connections etc.
Crux view
I'll try again here you go
View attachment Crux_View.zip
spraggy said:
I'll try again here you go
View attachment 74135
Click to expand...
Click to collapse
I don't know how to use this programme. Need I change the setting of the programme?
When you start it, accept it then when the screen comes up change the comm port (should show default comm1) and change it to comm port 4 (comm4) which is the built in gps port. Then click open in the top right and wait for it to connect to your gps. If your gps is working it should show how many satillites it has seen, then it should show you how many it has connected (better to be outside when you do this).
If nothing shows up at all try different comm ports. if something does show up then your GPS is working and you need to reconfigure which port it is using to your default so it always uses that port.
It is only a trial version not the full version but it's enough to test if your GPS is working.
Let me know how you get on. If you need simpler instructions let me know and i'll talk you through it.
Or install Google maps, press 'menu' and click 'use gps'.
http://www.google.com/gmm/gps.html
First sign that you DO Have GPS is when the Multi LED (Left One) starts flashing orange, NOT the right one, the left This indicates, that the GPS Device is initialized. If this LED is flashing, your device is searching for satellites. It could be that if you install one of these applications there won't happen anything, due to a missing GPS Fix, which takes a while, so i would recommend you look for the LEDs...
Make sure you tell your gps software to use COM 4 at 57600 baud rate with the NMEA protocol.
Related
... can someone give me the settings to fix this problem, and also an english lanuage voice, thanks
Other NMEA GPS recever Baud Speed to 9600 on Com 4 should work fine. You can download a voice from www.tomtom.com go to the Plus section of the site and select voices, the built in ones are available for download, what happened to your original? - Mike
thanks for the help, dont know what happened but they all came up not installedhad a look at the extended rom and tried to run the cab but it wouldnt run, but al should be fine now thanks
the gps still wont work, what settings do you have in the gps applet in settings? i cant select com 4 in tom tom what comes up is com9 gps com0 com2 and serial, no matter what it is set to in the gps settings
I think you need tom tom 6.02 to recognize the internal gps.
I'm using tomtom 6.010 and it works perfectly on Xda Orbit.
Settings in Orbit
Program GPS: Com 4
Hardware GPS: None, baud rate 9600
Tick Manage GPS Automatically
Settings in tomtom
Select "Other NMEA GPS Receiver" 9600 on Com 4.
Have you been to the Tomtom options>preferences>GPS>configure yet? maybe that's your problem ??
Mine is set to com 4 by default in the prefs and In built GPS in the TomTom settings. Hope it helps.
EDIT:
Also bear in mind that the program will take about 30 secs to recognize the built in GPS and then it will take around 45 secs to get a signal outside so give it time too
astrodemoniac said:
Have you been to the Tomtom options>preferences>GPS>configure yet? maybe that's your problem ??
Mine is set to com 4 by default in the prefs and In built GPS in the TomTom settings. Hope it helps.
EDIT:
Also bear in mind that the program will take about 30 secs to recognize the built in GPS and then it will take around 45 secs to get a signal outside so give it time too
Click to expand...
Click to collapse
With 6.02 it takes about 10 seconds for a cold start to get a lock and 3 seconds for a hot start. It uses the QuickGPS files! Mine has usually got a fix by the time I've loaded TomTom and opened the satelite info page!
Phil
I have :
Software tab : port : com4
hardware tab : port not set, speed 4800 bauds
Acces tab : select the item
These are the settings with were set when I bouth the device.
KR, Imer
low405 said:
With 6.02 it takes about 10 seconds for a cold start to get a lock and 3 seconds for a hot start. It uses the QuickGPS files! Mine has usually got a fix by the time I've loaded TomTom and opened the satelite info page!
Phil
Click to expand...
Click to collapse
QuickGPS files ?????
Quick GPS is an application on the HTC Artemis and MDA-C-III (Not too sure about the Orbit as I haven't had a chance to mess around with one yet).
It uses the internet or GPRS connection to download a tiny database every 72 hours to speed up the GPS signal acquisition. It is in program files on the device if you have one - Mike
Got It working in the end Couple of Restarts got it going. and to clarify the orbit does Have the Quick GPS aplication, thank you all for your Help
Hi all,
Seems what ever i do my tomtom6 cant find my built in gps. Try'd to set it to com port 4 ect. but nothing Any have more sugestions?
If so thx already.
6Tom9 said:
Hi all,
Seems what ever i do my tomtom6 cant find my built in gps. Try'd to set it to com port 4 ect. but nothing Any have more sugestions?
If so thx already.
Click to expand...
Click to collapse
First, make sure your Quick GPS is up to date ( although I'm not really sure just how effective quick gps is, I'm sure I've had a signal without updating in about the same amount of time)
On your MDA, go to Settings/Sytem/GPS.
Click on GPS and in Programs tab, set GPS program port to 'COM4'
Click Hardware tab, set GPS hardware port to '(None)', and set Baud rate to
'4800'.
Click Access tab, tick box for 'Manage GPS automatically (recommended)'
Load Tomtom and go into the GPS Receiver configure screen. Select Other NMEA GPS receiver. Next screen, slide GPS baud rate to 4800 if it isn't already at that. Click done. Next screen, highlight COM4 if it isn't already highlighted, then click on COM4 and it'll bring you to the next screen which shows your current GPS Status.
Make sure you are outside to get a signal. It can take anything from 2 minutes or longer. Mine rarely gets a signal before 2 minutes and sometimes much longer. Some people are very lucky and manage to get a signal within a few seconds, though I've no idea how they manage that.
Also, I've just replaced Navigator 6 with Navigator 7 which is essentially the same but with some different colours, splash screen and one or two additions in the change preferences menus. However, it has a new feature in the GPS Receiver screen which might be useful. It now has Built-in GPS receiver and there seems to be nothing to set after clicking on that. I'm going to go test it now, see if it's any faster or works at all.
I DID IT YAYEE!!
For HTC TOUCH HD TOMTOM6 i chose 9600 and com2 and its now working.
In mobiles setting i turned all com to none..
cheers!!
Roman5 said:
First, make sure your Quick GPS is up to date ( although I'm not really sure just how effective quick gps is, I'm sure I've had a signal without updating in about the same amount of time)
On your MDA, go to Settings/Sytem/GPS.
Click on GPS and in Programs tab, set GPS program port to 'COM4'
Click Hardware tab, set GPS hardware port to '(None)', and set Baud rate to
'4800'.
Click Access tab, tick box for 'Manage GPS automatically (recommended)'
Load Tomtom and go into the GPS Receiver configure screen. Select Other NMEA GPS receiver. Next screen, slide GPS baud rate to 4800 if it isn't already at that. Click done. Next screen, highlight COM4 if it isn't already highlighted, then click on COM4 and it'll bring you to the next screen which shows your current GPS Status.
Make sure you are outside to get a signal. It can take anything from 2 minutes or longer. Mine rarely gets a signal before 2 minutes and sometimes much longer. Some people are very lucky and manage to get a signal within a few seconds, though I've no idea how they manage that.
Also, I've just replaced Navigator 6 with Navigator 7 which is essentially the same but with some different colours, splash screen and one or two additions in the change preferences menus. However, it has a new feature in the GPS Receiver screen which might be useful. It now has Built-in GPS receiver and there seems to be nothing to set after clicking on that. I'm going to go test it now, see if it's any faster or works at all.
Click to expand...
Click to collapse
Hi,
I got Quick GPS updated through Activesync
in Settings/System, I have External GPS... not GPS
In External GPS, I did what you suggested.
Same with TT too
I am still not able to get a lock.
It still get "Waiting for a valid GPS signal..."
What more can I try?
Do I need an external antenna?
--Maddu
Hello,
I got this PPC a few days ago (from t-mobile. germany) and I still did not get the GPS thing running...
Does anyone have an idea with witch free program I can test GPS and how I have to configure it? GPS isn't really covered in the manual.
Or do i have to buy an antenna or something extra?
Thanks for help
Did your device come with some GPS related software such as a navigation package, if so which one?
You don't need an external aerial for it to work, if you haven't got any software there are a number of free utilities that can be used to check that it is working - Mike
ok, it's great to hear that i don't need a hardware addon to get it work, but i don't know other gps programs than gpsdash... and gpsdash doesn't work, i dont know how to configure it, it always says "satellites in use: 0"
how do i have to configure the com port and the baud rate?
For a start leave the GPS icon alone you don't need to mess with that.
In GPS Dash you want to select the following:
NMEA data type
Baud Speed 9600
Com Port 4
then you should start to see things working, I don't have that application on either of my Arte based devices, but these settings will work.
Otherwise have a look for the old TomTom GPS driver from version three or earlier I know this works as I use it from time to time on both devices.
Download, unzip and copy the CAB file to your memory card, then using the file explorer on the device locate the cab file and tap it to install the application. - Mike
Hi there,
Is there a way i can test if the gps chipset on my new p3300 is working properly?. I installed Iguidance but it will never get a fix although it does auto detect the gps port . I ran quickgps over wifi and despite downloading the latest fixes, Iguidance fails to get a fix
I am looking for any freeware appz which can just tap into the gps receiver and start spitting some data so i can be assured its not the gps module but Iguidance. Something like a gps viewer which displays the # of sats, lat n longitudes etc.
I appreciate any help I can get as I have only 2 more days before i can get this device exchanged.
Thanks in advance!~
btw, I am running Wm6 using B&b3.7 rom
Search on google for visualgpsce.
Bye
Grab a copy of the TT GPS Driver 2,06 from here http://www.pocketgpsworld.com/modules.php?name=Downloads&d_op=viewdownload&cid=13 install that as it is an application in its own right.
Fire up the application on the Artemis and select the GPS tab in the application Use the following Settings:
Top drop down box "NMEA 0183v2 9600"
Second drop box "COM4"
Make sure the two sliders in the middle of the screen are to the right, then check the grey/ blue box top left, return to the "Status" tab and take the unit outside, you should see some activity and get a position fix after a couple of mins - Mike
Thank you guys so much..
After running the app, i got 12 sats in view and 7 fix. So w00t, the gps chip is working.
Now to figure out whats wrong with iguidance
Thanks again...
Not too sure about that app as I have not tried it (yet) - does the GPS hardware actually start when you fire up the application - if you can configure it to use COM4, Baud 9600 do so and try it again. The indication the GPS has fired up is down to the LEDs on the device, once started it will flash orange to signify its in use. If this doesn't happen you might need to look into using Fransons GPS Gate to present a virtual GPS port to the application - Mike
Well, I do see the orange light blinking when Iguidance is running but still sees no sat's.
I even upgraded to V3.01 and same issue. Also tried Franson gate app and no luck.
I could try tomtom since that appz does see the sats and gets a fix ( tried it using a free US map) but i am having trouble loading the N.A+canada map since i don't have the cab file for it just the extracted map files which Tomtom HOME will refuse to load unless its a cab file i believe
Off to google to hunt on instructions on how to make cab files...
last time i checked iguidance v3 wasn't compatible with the artemis.
Oh ic. I did come across a couple of posts reflecting the same .
Oh well..I loved the map loader feature of Iguidance. Sad to see its gone in the upcoming V4.
Anyways I got tomtom running.. i was suppose to have the maps in the root folder of the memory card not in a sub-folder !
can anyone help me plzz
when i use google map USE GPS it says no gps reciever found
and when i use tomtom 7 it says same sort of thing and according to my little knowledge it is gps inbuilt mobile isnt it can anyone help me answer this plz if there is wrong with my blackstone plz let me know how to fix it. plzzzz
When you start TomTom click on the box to the bottom right to bring up status summary, then click on the bar to the right that says staellites, choose configure, slect "other nmea gps receiver" slide baud rate to max (115200) then select "Com4"
Job done
If you have like me installed VOIP, try this one:
To solve the problem just rename file /windows/dnsapi.dll to for example dnsapi.dll_bck and make soft reset or turn off and on your device.
There will be created a new file with the same name and you can delete the old renamed one. Then the GPS working properly as well as VoIP. Good luck...
Thank you
Thanks for you help but still just make me sure plz blackstone got inbuilt gps or not??? are you people talking about anything else.. coz i tried both of above options but no still when i use google man it says no gps ... bla blah blahh
and in tomtom 7 it says no singnal and when i force it says you may be inside building.....
hi
u need to go to Tomtom setting. First go to windows setting , click external gps to define your port com as 4, and the rate: 9600 etc, then start tomtom, go to setting, choose gps setting, then select external gps receiver (not sure, i forget tomtom!) choose the right rate and port come, 4 and 9600. then it should be working! if it still not working, try google it! good luck!
and the google map thing, forget it, it wont work and take data from Gps, as far as i know, all it uses gps is to identify ur current postition!!!! then it use 3g to download data just like when u use google map on ur pc!!! careful the data costs!!!
My Garmin XT doesn't able to connect to COM4. It just automatically changed to intermediate driver. The intermediate driver works, means, it can get a fix, but the data are incorrect. It misses about 500m from where am I now. also the elevation seems not correct, it shows -78m, where with visual gpsce, i get 21m.
Oh, one more, with intermediate driver, it seems get a lock for a second, and lose on next second.
Anybody experiencing the same issues?
btw, on my TyTN II, it works fine.
you need to tweak it, the thread is around here somewhere, sorry am using my phone, a bit hard to search and copy paste
Do you mean tweaking the registry? I tried it, but doesn't change a thing..
So basically, I get accurate data with visual gpsce, but not with garmin.
Did you downloaded the latest version of Mobile XT?
yes I did. It's 5.00.20wp
i am using a similar version of garmin mobile xt with no issues on the touchpro2
Are you able to connect directly to com4?
mine only able to connect via intermediate driver.
Is it possible to connect directly to com4 at all? I always assumed that whatever you do, when selecting the com port, it still goes through the driver?
I have no problem using Mobile XT (same version as you). Position is quite accurate (maybe just 20m off). And I'm using the standard settings for the PPC version.
rob_p said:
Is it possible to connect directly to com4 at all? I always assumed that whatever you do, when selecting the com port, it still goes through the driver?
Click to expand...
Click to collapse
Yes, that's true. Also check your current elevation. Is the data correct? mine always shows negative value. (I'm +- 20m above sea level)
Does Garmin works smoothly for you? Mine seems to lag by 1-2 seconds like on TomTom. Works smoothly on iGo 8.
I did do the registry hacks but still no luck. Any other suggestions?
bumping an old thread because i have the same problem, garmin is GOOD, but lags a second or two behind, causing me to miss my exits. i've done the registry tweaks but to no avail... anybody? i've also read about gpsgate and the gps driver on the site, can anyone confirm them working?
heres an example: (not my video) http://www.youtube.com/watch?v=gJ2gQx48Zng
watch 0:54-1:00
you see that the person passes under the overpass at 56, but it doesnt register on the garmin mobile until 58.
HOW CAN I ELIMINATE THAT LAG?!
bump :*( nobody has any problems with garmin?