Related
I have a tomtom bluetooth gps receiver that I used to use with my xda-ii for my satnav solution. I had a car charger that charged the xda and tomtom unit at once. I have now upgraded to the Exec and am hoping to find a similar car charger but couldnt find any on google/ebay - does anybody know of one that exists?
Thanks
Allan
Cannot be of help, but looking for the exact same solution. I had an iMate JAM and a cradle that charged that (mini-USB) and had an output for TomTom Bluetooth. If all else fails I could try taking apart the adapter because it has the correct output, just the Exec won't fit in it!
assuming the TOMTOM gps receiver uses a round 5V center positive connector to charge it ( which it almost certainly would do )
then check out my posts in this thread,
http://forum.xda-developers.com/viewtopic.php?t=29351
the cradle even comes with a wire just for charging BT GPS receivers
Ouch! Thats a little pricey!
I already have a mount that holds the unit, so I am just looking for a calbe charger solution. Anyone have any links?
Thanks
Allan
in that case I have seen a car lighter plug on ebay that has a USB socket in the back, it was on £3~£4 you could then use a regular sync and charge cable to charge it
o2 shops are now stocking the car charging lead... complete with natty o2 shaped blue indicator!
To get round the problem of daisy chaining mounts and receivers, I got a great car charger - dual usb adapter from eBay (I searched for "dual usb car") which gives you 2 usb sockets for about £8 all in. Having bought this though, I'm thinking of installing a spare cigarette lighter socket behind the dash to power it from and cut down on cables in the cabin...
Funnily enough, the many Sync and charge cables for the Sony PSP would be able to simultaneously charge both a Jasjar and a bluetooth GPS unit
here is an example
http://chakatche.fr/catalog/images/PSP/CablesyncchargePSP_big.gif
Universal charger- special
The Universal as well as the Typhoon, Wizard etc. need special wiring for the mini USB. when connecting to the computer the the driver is activating the proper pins in the Mini USB socket and you can see the "charge" light on. However when connecting to a USB Poer Supply, pins need to be manipulated (some to ground or perhaps to Vcc). I'v looked into this issue many times (searching in the Internet) and could not find a proper wiring diagram. although I know for sure that they are exist as there are some Car working chargers offered for Universal / Typhoon.
In any case refering to this thread, a car charger that works for Jam/XDA2Mini most probably will not work for the Jasjar/Universal unless i is apecified as a Universal car charger.
If any of the memebers has come a cross a wiring diagram for Typhoon / Universal charging scheme it is appreciated if you could provide details.. as many of us would like to build their own car charging units.
Re: Universal charger- special
Dubi said:
The Universal as well as the Typhoon, Wizard etc. need special wiring for the mini USB. when connecting to the computer the the driver is activating the proper pins in the Mini USB socket and you can see the "charge" light on. However when connecting to a USB Poer Supply, pins need to be manipulated (some to ground or perhaps to Vcc). I'v looked into this issue many times (searching in the Internet) and could not find a proper wiring diagram. although I know for sure that they are exist as there are some Car working chargers offered for Universal / Typhoon.
In any case refering to this thread, a car charger that works for Jam/XDA2Mini most probably will not work for the Jasjar/Universal unless i is apecified as a Universal car charger.
If any of the memebers has come a cross a wiring diagram for Typhoon / Universal charging scheme it is appreciated if you could provide details.. as many of us would like to build their own car charging units.
Click to expand...
Click to collapse
Dude, what are you talking about !! I use the sync lead from my kodak camera to charge my JJ from my laptop it works fine but is slow (my laptop hasnt got much umph) and the same goes for the PSP power lead I mentioned earlier, I use that in the car with my cradle that happens to have USB sockets in it, (pictured in another thread)
It seems that either your usb lead has the proper connection to fit the requirements of the JJ or I am doing something wrong that I am not aware of.
Here is the test: Just take a Powered USB Hub, connect XDA1, XDA2, XDA Mini, XDA2S (all the models that I could test right now) and It seems that the Powered USB Hub can charge these devices.
Now connect the JJ (I suggest with a traditional USB syc cable that comes with either ..) and NADA I got no indication for charging .. than connect the HUB to the your computer which has the ASYNC installed and you see that immidiatly the JJ is being charged. Both feeding measured at 5.15V.
The Typhoon behaves the same for me as well.
Further more, I have few USB chargers (other than the one equipped with the JJ) which is in fact a PS with a USB port . The result of connecting the PS through the traditional sync cable is "No Charging".
The same applied to many Car USB charger that I'v tried.
Perhaps your Kodak sync cable is special (in fact I am looking for the schematic diagram of a cable like this)?.
I tried (just now again) also with Dopod 828 and it seem the same (no charging unless it is connected to the computer).
Please double check your charger cable and try th sync cable that comes with the JJ.
I dont see why kodak would have used a special sync lead, because on the kodaks it is used for data only (power comes in via a diffrent connector) when I get a chance I will buzz out the cable for you !!!
PS I think you shold plug it in and wait, mine starts charging instantaneously when used with the mains adaptor which has 1 Amp of current available, but takes a min or two to start charging when I am using my laptop/in car charger, both of which only have 500mA available.
Car Charge
From reading other threads, Pin 4 in the Mini USB is shorted to ground and that's probably turn on charging ..
I suggest that you read threads about the power charge / car charge in other forums... here is an example I took and although it talks about the Typhoon it is relevant to JJ as well and it suggest to connect pin 4 and 5 to ground. I can't have a good explanation why your JJ starts to charge after 2 monutes. I suspect that it has nothing to do with the current that can b drawn from the PS.
http://www.expansys.com/forumthread.asp?code=I-MATE_SP3I&thread=38
Here's what I've found on modaco.com forums, posted by richwookie on Oct.4 2004:
QUOTE >>>
...I've hacked open my C500 mains charger (quick, where's the superglue), and sure enough there are only 2 wires leaving the box to the mini USB cable, GND (black wire) and VO (white wire). However, after very careful probing, with a very tiny probe no less, I've established that the GND wire is connected to both pins 4 and 5 of the mini USB connector.
Now usually pin 4 would be not connected to anything as pin 5 is normally GND. So next I probed the C500 data cable to see if pins 4 and five of the mini USB were connected together. They weren't of course.
So what does all this mean?
Well, from what I've discovered I conclude that the C500 will only charge if:
1) There is data on the line (even if it isn't saying anything :wink: )
OR
2) Pin 4 of the mini USB plug is grounded.
So what's the solution to making the generic car chargers work?
Do nothing to the car charger. Mod the data cable so that pin 4 at the 'mini' end is connected to ground.
This IS all speculation and I suspect that it is easier said than done. I haven't yet hacked open my data cable, but I expect there are only four wires in it, and the only way to ground pin 4 (mini end) is to somehow bridge them at the connector. I think that is beyond my soldering skills (have you seen the size of the contacts on the plug?!) but I may give it a go anyway.
Anyone else want to try? Let us know here.
<<< UNQUOTE
... and the 2 hours later:
QUOTE >>>
Posted from my SmartPhone while it is charging in my car using a 1.49 cigarette lighter USB adaptor and my newly modded C500 data cable!
I'll let you know if it still works as a data cable when I get home. ;-)
....
Modded cable doesn't work for data now.
When I connect it to the PC it just charges. I suspect that when the phone is in 'charge from adaptor mode' it inhibits the data lines.
<<< UNQUOTE
Well, I guess it's simpler to mod a USB cable, than either carry around a charger, or install Activesync everywhere.
With all this chat about modifying pins etc call me naieve but why not just buy a dedicated charger from expansys or an o2 store ? both cost between £10 - £15
:shock:
Just an observation I have made... I have an O2 EXEC, and charge it quite happily (sort of) with the Standard USB Synch cable and a Car Lighter Socket USB thingy.
The only thing is... It will NOT charge if the EXEC is on (screen lit up) when the USB lead is connected or power connected. Switch the device off, connect the lead, and the charging light comes on.
I find the same when I connect it to the computer with the Synch lead too. It won't connect to ActiveSync or Charge if the EXEC is on when connected.
Hope this helps.
Hi,
I am looking for cable that I could use to connect my JasJar PDA (USB mini port) with GPS (USB mini port) and car lighter. This cable should transmit data between PDA and GPS. Also it should power PDA and GPS from car lighter socket. Look at attached picture for better explanation.
Do you know where I could buy it?
Best regards
Marek S
Cześć!
Myśle, że nawet jeśli masz taki kabel, to będziesz mieć problem. And there my Polish runs out!
(trans: Even if you had such a cable, you'd still have a problem).
Or at least I would assume so... Even if you made a mini usb to mini usb cable with power spliced in from a car adapter (easy enough to do after all) then you would still have the problem of persuading your pda to use the usb connection for rx/tx gps data, which I would have thought was a drivers problem...
Anyone?
Hi,
As I read on some forum this device can work as USB host and WM 5.0 has many drivers also for GPS devices. Is that true? If it is, problem how JasJar will communicate with GPS is not a problem. The problem for me is that I cannot make that cable myself and I need sombody help.
Best regards
Marek S
Sadly, this device cannot act as a USB host... I am frankly disappointed that they decided not to implement it, but I guess there always has to be a reason to upgrade to the next model!
I'm afraid I don't know about WM05's support for GPS devices connected via USB, although I think I have read in other threads that people have tried without success to connect GPS receivers to their Universals.
I bought a BT gps receiver to use with mine, and am hoping to cover the cost of that when I sell my IIs, wired gps receiver, cradle etc. One thing that attracted me to the Holux that I bought is that it can apparently be used as a gps mouse if you buy the optional cable - a usb to usb mini that has a curious small plastic junction box halfway along it's length. I assume that there is some form of jiggery pokery going on in there (like swapping the 2 data lines or grounding something ) because I certainly can't connect my receiver to a laptop with a normal usb to usb mini cable.
Sorry I can't help more, but I think you may be stuck unless you can find someone locally who'll chop up some cheap cables for you to experiment with... :?
I am wondering whether if you got a Minu USB to USB B, plugged it into a cheap powered/unpowered hub, the to the GPS would it work?
If it is a cheap hub, when powered, it may have the 5V rails joined, in which case the power might run back to the universal.
However, before testing this, it would be wise to test that the USB can work with teh GPS on its own. If you do not have a mini USB A to mini USB A already and tested (I couldn't see such cables) then www.maplin.co.uk could supply you with the following, which would/should provide you with a connection if it is at all possible:
mini USB A to USB A (Standard with universal surely?)
Female USB A to USB B
Female USB B Female USB A
USB A to mini USB A (Standard with universal)
That is a lot of cables
This cable should transmit data between PDA and GPS.
WHy on earth would you want that?
JaySea said:
This cable should transmit data between PDA and GPS.
WHy on earth would you want that?
Click to expand...
Click to collapse
Once you can prove that the PDA can connect to the GPS that way (one of the posters was not particularly positive on that) then the addition of the HUB would allow you to put the power onto the cable.
Gareth
kabel...
Hi Marek,
This is not going to work for DATA but this kind of cable may work to charge both JasJar and BT gps. Log in to www.allegro.pl , find covox in "szukaj użytkownika" go and buy the BT gps with the mini usb port (like G-Space GS-R238) and solder in second usb mini cable into the included car charger .
thats all...
This should charge both....ordered one and am waiting for it, doubt it'll sync though.....
http://cgi.ebay.com/Motorola-Blueto...yZ108660QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I did a search and didn't see anything about this, so I'll post my question.
Has anyone gotten this to work? I plugged in my a/v cable (3.5mm to RCA) into the adapter that came with the TP2, and it into the TP2 usb port, then connected the RCA ends to my TV and when I tried to start the TV out under settings, it said I needed the TV Out cable.
I couldn't find anything in the provided documentation about this (surprise). I don't have the HTC cable, nor do I have the iphone/ipod cable, but I can't believe that this one would be any different from the icrap one, it's a freaking standard.
Any one?
The video out is actually the usb port. You need to buy a cable that is usb to composite
If your cable is iPod compatible, you should be able to install this get TV Out to work.
this is what i bought and it works great with my sprint tp2 http://www.expansys-usa.com/d.aspx?i=179148
I dont understand what you mean by iPod compatible?
Dont I need HTC's special USB video cable? Does anybody have a wireing schematic on that so I can make one? I have a million 3.5mm to rca cables lying around but that wont work...
MustangChris04 said:
I dont understand what you mean by iPod compatible?
Dont I need HTC's special USB video cable? Does anybody have a wireing schematic on that so I can make one? I have a million 3.5mm to rca cables lying around but that wont work...
Click to expand...
Click to collapse
From my understanding (my tilt2 hasn't come yet, so I can't confirm) you should have an adapter that comes with your device that converts the ext-USB into a 3.5 mm headphone jack. You can plug an HTC 3.5mm to RCA cable in that jack, or put an iPod compatible RCA cable (uses the same pinouts as HTC's cable and is essentially identical, but cheaper) and change HKLM\Software\HTC\H2W\TVOutCableIn to "1" in the registry in order to get it working. The software I linked to should do this automatically, so you don't have to do that each time. However, I don't know if this works on the TP2 since I don't have mine yet.
My touch pro 2 didnt come with that. I actually have a usb jack, and a 3.5mm headphone jack on the bottom. It is the Verizon version.
Ok, I followed the instructions on this video: http://www.youtube.com/watch?v=2CLPjcImHAg&feature=fvw
I did both reg hack changing 0 to 1, as well as trying the icon under settings. The reg hack did bring up the screen, but nothing was outputted to the TV. I can't believe my 3.5mm -> RCA cable is any different than an "ipod compatible" one, it has the 4 bands on the 3.5mm jack and 3 RCAs for audio (l/r) and video. Is there something I'm missing? I don't want to buy the HTC usb/rca cable, and would be pretty upset if I got it and it still didn't work.
i tried it with my camcorder cable and the extusb adapter supplied with my phone. no luck. my camcorder cable only has 3 bands. does this make a difference? i have literally hundreds of cables. i'll have to search and try out a few others. or i'll just buy the official one on ebay if necessary.
I attempted this tonite. Did not work.
Sprint TP2
Apple iBook AV cable - 3.5mm -> 3way RCA yel, red, white
HTC EXTusb adapter.
tried 2 different cabs (enabletvout.cab and nuetvout-102-v1) as well as just changing the reg value to 1.
tried changing around the rca cables to the video input on tv..
I was able to get the tv out options to display on the phone, but NOTHING ever went out to the TV.
I hear people are having success with the oficial HTC tp2 tv out cable, which is a miniUSB -> 3 way rca.
Any success using the 3.5mm jack on a sprint tp2 ?
I had some luck with a cable I had but found that I needed to use the Red RCA as my video and the Yellow and White as audio.
JudgeDredd67 said:
I had some luck with a cable I had but found that I needed to use the Red RCA as my video and the Yellow and White as audio.
Click to expand...
Click to collapse
i was all excited but that didnt work for me.
I had to purchase the extusb to av jack like this one.
AV Cable Works great.
You don't need to install the TV out cab. It will auto pop up when the cable is inserted. Most roms have this built in. The Tilt 2 stock rom does.
I used the original HTC OEM multi adapter with my 3.5mm RCA cable after prying it open and cutting the blue cable, which enables Tv out on my Tilt 2, but disables headphone use which is why im putting a switch in there.
well, I purchased the USB to video output cable and it workd fine.. HOWEVER only certain program work.. for instance, I wanted to see if I could watch sprint TV using the TV out and it tells me it can not run wth tv out. is there any way to do this??
Do a search on PPCGeeks.com forums for "How did you get the tv out/video out to work on the touch pro 2." I had to remove/cut the blue wire from the multi-adapter which came w/ my TP2. Hook up a standard 3.5mm jack to composite cable that came with my camcorder. Then I was able to get audio and video working on my 47" TV. No other software was required. The only thing is, you have to swap the yellow cable with the red. Red now provides the video signal. Otherwise, everything else works great.
Credit goes to the original poster in PPCGeeks.com. I would have provided a link to the instructions, but since I'm still new on this site, my posting privileges are still limited. Good luck everyone. I hope this was the answer you were looking for.
What are we all talking about? on my TP2 (SPRINT) I bought a cable for video and audio output that has USB on one end and RCA plugs on the other end. I just plug it into the USB port of the TP2 and hook up the RCA to my TV. It also has a port for plugging in the charger while the video out cable is plugged it...
dahauss said:
What are we all talking about? on my TP2 (SPRINT) I bought a cable for video and audio output that has USB on one end and RCA plugs on the other end. I just plug it into the USB port of the TP2 and hook up the RCA to my TV. It also has a port for plugging in the charger while the video out cable is plugged it...
Click to expand...
Click to collapse
This is another option for those who do not wish to purchase the $20 - $25 USB to composite cables for the video outputs. Most of us received the USB multi-port device with our TP2. But by just cutting the blue wire from that device, you can have video output with a standard 3.5mm to composite cable (Red, white, yellow). Some of us may have this cable lying around the house. It usually comes with camcorders. If not, many places sell these standard cables for about $2 to $5. It's just information for those who wish to spend as little money as possible. That's all. Good luck.
All the video cables I find have the regular mini usb data cable port and not the different HTC mini usb port. Are there video cables with the HTC usb port?
To clarify, the part that plugs into the phone is the HTC plug, but the plug for the charger midway down the cable is the plug I'm referring to. Where can I find one with the HTC usb plug instead of the mini usb?
Mossesman said:
This is another option for those who do not wish to purchase the $20 - $25 USB to composite cables for the video outputs. Most of us received the USB multi-port device with our TP2. But by just cutting the blue wire from that device, you can have video output with a standard 3.5mm to composite cable (Red, white, yellow). Some of us may have this cable lying around the house. It usually comes with camcorders. If not, many places sell these standard cables for about $2 to $5. It's just information for those who wish to spend as little money as possible. That's all. Good luck.
Click to expand...
Click to collapse
I cannot find a USB to composite cable anywhere on the net. I don't think that it would even work with the TP2 video out capabilities.
For my in car solution, previously I used a brodit Active dock which you could plug an iphone cable into the bottom of, that cable I used previously for iphone was one iphone port in, but had an audio out as well as usb charge cable, so I was able to jack into my cars 3.5 Audio port and the other end into a usb cigarette port adapter, it was commonly referred to as a Y Cable.
I am looking to do similar from the Brodit Active HTC One X dock once its released, and ideally use one cable that plugs into the docks micro usb port (which the HTC One X plugs into in the dock).
So, a) does the micro usb port on the phone support sending the audio out ? and b) if so, does anyone know of a cable that will split out to an audio and usb end such as I described above..
Thanks for any help anyone can offer.
ta
Mart
to give some context, I used a cable like this one for the iphone and active brodit dock before..
http://www.ebay.co.uk/itm/BMW-Coope...s_Adapters&hash=item4d010007e2#ht_2628wt_1378
I cannot seem to find anything similar for micro usb.
mgdew said:
to give some context, I used a cable like this one for the iphone and active brodit dock before..
http://www.ebay.co.uk/itm/BMW-Coope...s_Adapters&hash=item4d010007e2#ht_2628wt_1378
I cannot seem to find anything similar for micro usb.
Click to expand...
Click to collapse
It should be able to
http://www.expansys.com/expansys-usb-cradle-with-hdmi-out-for-htc-one-x-231980/
The USB does HDMI which carries audio. Someone with more knowledge will be along soon I imagine though, they'll be able to point you where you need to be!
thanks for the hdmi headsup.
Anyone else able to offer a solution ?
HDMI is digital though, so to use with a standard 3.5mm Aux you will need a digital to analogue converter. Assuming it cant switch to analogue... its a bit up in the air at the moment, need to wait for a few devices to hit the shops :/
All you need is-
Micro Sd to car adaptor for power.
3.5 jack to 3.5 from phone to stereos aux in.
You can call, use sat nav whilst listening to music.
Will mute music for ditections, phone call whateva!
You can also make a cable and connect them to the pins on the back that are used for a dock.
Sent from my HTC One X using xda premium
Thanks for the replies. I already have two separate cables wires in for aux and for usb, but I wanted to try and have only one cable so I could literally attach one and not have to plug both in and out, hence the year cable idea of
Sent from my HTC One X using Tapatalk 2
I just use bluetooth
Sent from my HTC One X using xda premium
Hello all,
I just purchased the ONE and as part of a promotion from T-MO US they gave me a free car adapter. I would like to hardwire the car adapter to my car, but the connection cable they gave me was just a Micro-USB charging cable.
I do not want to have to dock the phone then have to insert a 3.5mm headphone cable into the top of the phone and have wires running all over the inside the car.
I can modify the bootom of the dock to accept an MHL cable instead of Micro-USB, but I need to find a product that break off MHL into USB (hardwire for charging) and 3.5mm headphone jack that I can then plug into the back of my factory stereo behind the dashboard, thus only having to dock the phone and not have to plug anything else into it.
Any suggestions on such a product?
This thread might help....
http://forum.xda-developers.com/showthread.php?t=1321491