I have TYTN with Schaps WM6 ver 3.57a
Has anyone know how to configure the VOIP to support Gizmo project?
i second that
When I had Schapps I never set up VOIP, but with Black Dymond way back when I downloaded and installed the SipConfigTool and set username at my Gizmo number 1747XXXXXXX, password as your own password, and the gateways as proxy01.sipphone.com (same for sip server, domain and realm if asked). If you use another tool and can set a stun server, set it to stun01.sipphone.com. Schapps probably has his own voip settings tool, but if you run a search on the SipConfigTool I'm sure it will still do the trick.
I was never very happy with the WM6 voip on any provider, and have since relied on fring, which I felt worked better especially for receiving calls reliably. See www.fring.com for more info. I've got multiple call in numbers in several countries through both Gizmo and Skype all of which I route through fring which I use with a 3G connection. Depending on the connection there's some mild latency, but I never miss a call and the Gizmo connections are far superior to anything I was able to get with just the WM6 client or Skype.
Quist you right also with Schap's Gizmoproject SIP account is working well for me with Shap's 3.54c
Shap's have the built-in SIP confiuration tools under "system tools"
please note that you can replace your number with your account name.
Was glad to find this thread, but a bit disappointed on how old it is and without resolution. I have an 8525, with Schap's on it. I would like to set up the Internet Calling built in to this ROM with my Gizmo Project information as if it were an ATA.
I also have an ATA at home, a Innomedia left over from Sunrocket days, configured and working with Gizmo.
I am particularly interested in using this with WiFi, and not over 3G.
Using the information on GP website:
http://support.gizmoproject.com/index.php?_a=knowledgebase&_j=questiondetails&_i=88
I have gone into Schap's Settings/Connections/VoIP to get the config screen.
Provider name is irrelevant, and I put in "gizmo"
for user account, I put in my area 747 number, both with a leading 1 and without. I have put in my correct PW.
For registrar address, I was unsure what to put in, and I ended up filling in the STUN information from the GP website: stun01.sipphone.com port 3478 / UDP.
Proxy is set up as proxy01.sipphone.com:5060 / UDP. <- sure that one is right.
The URI automatically fills in with the information from above.
However, I still can't make things work. I'm not sure if it is the registrar/STUN stuff that is messing me up, or if my userID should be some other variation?
Has anyone made this work, and if so, how? I have a feeling it is some silly setting I've just messed up here.
Thanks.
I'm pretty sure your username needs to include the domain. These settings are for a different phone, but should apply the same.
Profile Name: sipphone
Service Profile: IETF
Default Access point: [your WLAN AP name]
Public user name: sip:[email protected]
Use Compression: No
Registration: "Always on"
Use Security: No
--
Proxy Server: siproxy01.sipphone.com
Realm: proxy01.sipphone.com
User Name: 1747xxxxxxx
Password: [You SIPPhone password]
Allow loose routing: Yes
Transport Type: Auto
Port: 5060
--
Registrar Server: siproxy01.sipphone.com
Realm: proxy01.sipphone.com
User Name: 1747xxxxxxx
Password: [Your SIPPhone password]
Transport Type: Auto
Port: 5060
My q
vdub144 said:
Was glad to find this thread, but a bit disappointed on how old it is and without resolution. I have an 8525, with Schap's on it. I would like to set up the Internet Calling built in to this ROM with my Gizmo Project information as if it were an ATA.
I also have an ATA at home, a Innomedia left over from Sunrocket days, configured and working with Gizmo.
I am particularly interested in using this with WiFi, and not over 3G.
Using the information on GP website:
http://support.gizmoproject.com/index.php?_a=knowledgebase&_j=questiondetails&_i=88
I have gone into Schap's Settings/Connections/VoIP to get the config screen.
Provider name is irrelevant, and I put in "gizmo"
for user account, I put in my area 747 number, both with a leading 1 and without. I have put in my correct PW.
For registrar address, I was unsure what to put in, and I ended up filling in the STUN information from the GP website: stun01.sipphone.com port 3478 / UDP.
Proxy is set up as proxy01.sipphone.com:5060 / UDP. <- sure that one is right.
The URI automatically fills in with the information from above.
However, I still can't make things work. I'm not sure if it is the registrar/STUN stuff that is messing me up, or if my userID should be some other variation?
Has anyone made this work, and if so, how? I have a feeling it is some silly setting I've just messed up here.
Thanks.
Click to expand...
Click to collapse
put the registrar and the proxy the value - proxy01.sipphone.com:5060 / UDP
edward
edward: Have you actually gotten this working? Can you show us exactly what settings you are using?
In my setup VoIP program I have these options, and this is how they are set:
user account: [gizmo username]
password: [passwod]
registrar address: proxy01.sipphone.com
Port: 5060 UDP
proxy address: proxy01.sipphone.com
Port 5060 UDP
URI address: 1747[my sip number]@proxy01.sipphone.com
I am getting "no service" on the home screen. What have I missed?
gthing said:
edward: Have you actually gotten this working? Can you show us exactly what settings you are using?
In my setup VoIP program I have these options, and this is how they are set:
user account: [gizmo username]
password: [passwod]
registrar address: proxy01.sipphone.com
Port: 5060 UDP
proxy address: proxy01.sipphone.com
Port 5060 UDP
URI address: 1747[my sip number]@proxy01.sipphone.com
I am getting "no service" on the home screen. What have I missed?
Click to expand...
Click to collapse
user account: 1747[my sip number]
password: [passwod]
registrar address: proxy01.sipphone.com
Port: 5060 UDP
proxy address: proxy01.sipphone.com
Port 5060 UDP
URI address: 1747[my sip number]@proxy01.sipphone.com
also enable the option in Schaps VoIP Settings
in options Enable VoIP over 3G
or if you use only wifi connect first to the network
i am using schaps 4 RC with this configuration and it work ok
edward
Nice, I reset and tried again - seems to work now.
A few problems though:
1. The settings seem to be reset when you reset your phone. How do you solve this?
2. After completing two test calls successfully, I let my phone "go to sleep" and when I turned it back on I had lost connectivity for VoIP (no service). Do I have to keep it awake to be able to receive calls using this method?
gthing said:
Nice, I reset and tried again - seems to work now.
A few problems though:
1. The settings seem to be reset when you reset your phone. How do you solve this?
2. After completing two test calls successfully, I let my phone "go to sleep" and when I turned it back on I had lost connectivity for VoIP (no service). Do I have to keep it awake to be able to receive calls using this method?
Click to expand...
Click to collapse
1.The settings are not reseting when i reset my phone
2.dont have this problem
Gizmo5
Gizmo just launched a midlet for it's service.... I have it but haven't check to see if it works yet... this could be a good solution for some.
http://www.gizmo5.com
I think it what it does is call your phone first and when you pick up it calls the other phone... not 100% on that though.
Mark
Where do I put stun settings?
okay got it to work, however
, I need to use g.729 codec, is there anyway to do so?
how to open .jad
i got Schap's 4.0 there is no midlet service. so could i install the gizmo execution program such as .jad. by the way, anyone can tell me how to open the .jad on tytn.
thank you very much.
i have an unlocked att 8525 (HERM100) and am currently with a tmobile sim. are there any settings to make the mms feature work??? cant send or receive
What country are you in? If i were to give you my settings for the uk and you were in america they wouldnt be much good to you
Attached here is a file to configure any uk phone for internet and mms on contract
to Change the settings to make it work on payandgo simply change they username and password settings to the ones listed below, i have never used 3 network so i am afraid i dont have them.
These need to entered into the mms server settings by click on MMS Messages > Menu > Tools >options > MMS >
then click new and enter the details below after entering the settings make sure you press and hold on the settings you have created and select it as the default then delte the old settings, if any are there
o2 MMS settings
The o2 MMS settings can be sent direct to your mobile. Go to http://ota.o2.co.uk/O2UK/index.jsp. Alternatively, the settings are:
Access point name: wap.o2.co.uk (contract customers) or payandgo.o2.co.uk (pay-as-you-go customers)
Username: o2wap (contract customers) or payandgo (pay-as-you-go customers)
Password: password
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 193.113.200.195
Session mode: Permanent
URL address: http://mmsc.mms.o2.co.uk:8002
Vodafone MMS settings
Access Point Name: wap.vodafone.co.uk
Username: wap
Password: wap
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 212.183.137.012
Session mode: Permanent
MMS Message (Relay) Server URL: http://mms.vodafone.co.uk/servlets/mms/
T-Mobile MMS settings
Access Point Name: general.t-mobile.uk
Username: user
Password: (as supplied on MMS registration)
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 149.254.211.010
Session mode: Permanent
MMS Message (Relay) Server URL: http://mmsc.t-mobile.co.uk:8002/
Orange MMS settings
Note: Orange must enable MMS for your account. Contact Orange Customer Services
Access Point Name: orangemms
Username: Orange
Password: Multimedia
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 192.168.224.10
Port: 9201 (some users have reported 8080 works if 9201 doesn't)
Session mode: Permanent
MMS Message (Relay) Server URL http://mms.orange.co.uk/
Virgin MMS settings
ote: Virgin must enable MMS for your account. Contact Virgin Customer Services
Access Point Name: goto.virginmobile.uk
Username: user
Password: (leave blank)
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 193.030.166.001
Port: 8080
Session mode: Permanent
MMS Message (Relay) Server URL http://mms.virginmobile.co.uk:8002
Tesco Mobile MMS settings
Many thanks for Nick B and Martin J for suppling this info
Access point name: prepay.tesco-mobile.com
Username: tescowap
Password: password
Authentication: Normal
Data bearer: GPRS
Gateway IP address: 193.113.200.195
Session mode: Permanent
URL address: http://mmsc.mms.o2.co.uk:8002
BT Mobile MMS settings
Access point name: mobile.bt.uk
Username: user
Password: btmms
Authentication: Normal
Data bearer: GPRS
Gateway IP address: 62.239.21.123
Session mode: Permanent
URL address: http://mmsc.btmms.co.uk:8002
not sure if these will still work as they are a bit old,but try anyway
T-Mobile USA
GPRS CONNECTIONS:
Description: T-Zones GPRS
Connects to: The Internet
Access Point: internet2.voicestream.com (or internet3.voicestream.com)
User Name:
Password:
Primary DNS: 216.155.165.50
Secondary DNS: 216.155.165.50
IP Address:
Description: T-Zones WAP
Connects to: The Internet (or try directly to WAP network)
Access Point: wap.voicestream.com
User Name:
Password:
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
IP Address:
PROXY CONNECTIONS:
Description:T-Zones WAP Proxy
Connects From: The Internet
Connects To: WAP Network
Proxy (nameort): 216.155.165.50
Type: WAP
User name:
Password:
Settings-Data Connections:
Internet Connection: T-Zones GPRS
WAP Connection: T-Zones WAP
INTERNET EXPLORER > MENU > OPTIONS > CONNECTIONS:
Tick 'automatically Detect Settings'
MMS setup
Settings-Data Connections - Edit GPRS connections
Description : T-Zones MMS
Connects to : MMS connection
Access point: wap.voicestream.com
Settings - Accessories - MMS setup
First field: T-Zones MMS
IP: 216.155.165.050
Port: 9201
Mmsc Address: : http://216.155.174.84/servlets/mms
hi i have an xda orbit wm5 but all i can do with it is call and text, i can't get the settings from o2's website and in store, they are useless. i am hoping somone here may have the required settings for pay and go not contract ( its got those in it but no uk pay and go)
TIA
Jim
o2 UK Setting
Hope this helps, worked for i phone clone:
O2 WAP settings (dialup):
Homepage: http://wap.o2.co.uk/
Dialup number: +447712 927927
Gateway (IP) address: 193.113.200.195
Username: o2wap
Password: password
Session type: Continuous / permanent
Port number: 8080 (or try 9201)
Authentication: Normal
Old o2/Genie shortcode WAP number was: 915000
======================================
O2 WAP settings (GPRS):
Note: Different settings for contract and PAYG (Pay as you go)
Homepage: http://wap.o2.co.uk/
APN address (contract): wap.o2.co.uk
APN address (PAYG): payandgo.o2.co.uk
Gateway (IP) address : 193.113.200.195
Username : o2wap (contract) / payandgo (PAYG)
Password: password
Session type: Continuous / permanent
HTTP Proxy: 193.113.200.195
Port number: 8080
Authentication: Normal
Hello all,
I have an unlocked T-Mobile Dash which I flashed with Kavana’s 6.1 ROM - Remade by Ricky. I am using it on AT&Ts network and need help setting up the sms/mms and data connections.
So far I used the following for the data connection, I setup a new gprs conn with wap.cingular as the AP, [email protected] as the user and CINGULAR1 as the pw. For MMS i modeified the sample config file and used mmsc.cingular.com as the url, wireless.cingular.com as the gateway using port 80 and set it to connect via the WAP net.
SMS is not working and I do not know what I would need to configure. Any help from the geniuses is appreciated. Thx.
This is a VERY common request that most likely no one will answer for you. You should use the search feature and MMS ATT Dash you should find what your looking for it me almost 5 months to get MMS to work. first for what ever reason it does not work instantly. I had just given up and then 2weeks later I got a picture text. I was soooo happy, but I still could not send a picture text 10 days later I was able to send picture text. If you have AT&T unlimeted texting plan make sure you are on the the edge because my Dash is always switching to GPRS. If you send pictures audio, video via texting, make sure the E is showing in the tool bar cause if you have a G you will be charged for the message. Without seaeching on my Dash to verify I'm sure this is the setup I'm currently using.
Using an HTC s620 (unlocked Tmobile Dash) on AT&T’s network
Proxy Settings
Start>Settings>Connections>Proxy> Menu>Add
Description: AT&T WAP
Connects from: The Internet
Connects to: WAP network
Proxy (name: port): wireless.cingular.com:80
Type: HTTP
Username: (leave blank)
Password: (leave blank)
GPRS Connections
Start>Settings>Connections>GPRS>Menu>Add
Description: AT&T IMS
Connects to: The Internet
Access point: ims.cingular
User name: (leave blank)
Password: (leave blank)
Authentication Type: None
Primary DNS: (leave blank...will later default to 0.0.0.0)
Secondary DNS: (leave blank...will later default to 0.0.0.0)
IP address: (blank)
Start>Settings>Connections>GPRS>Menu>Add
Description: MEdia Net
Connects to: The Internet
Access point: wap.cingular
User name: [email protected]
Password: CINGULAR1
Authentication Type: CHAP
Primary DNS: (leave blank...will later default to 0.0.0.0)
Secondary DNS: (leave blank...will later default to 0.0.0.0)
IP address: (blank)
Advanced Connections Settings
Start>Settings>Connections>Menu>Advanced
Internet Connection: Automatic
Work Connection: Automatic
WAP Connection: Automatic
Secure WAP Connection: Automatic
Open Internet Explorer,
Menu>Tools>Options>Connections
Auto Detect Settings: Unchecked
Select Network: The Internet
MMS SETUP
(Text/Multimedia), Menu, New, MMS, Menu, Options, Message Options, Menu, MMSC Settings, Menu, New
o Name: Cingular MMS
o MMSC URL: http://mmsc.cingular.com
o WAP Gateway: wireless.cingular.com
o Port: 80
o Connect Via: The Internet
o Max. Sending Size: 300K
o WAP Version: WAP 2.0
Click Done
Menu>Set as Default
Click Done to return to the MMS Preferences Screen
Check the following boxes:
- Automatic download in home & roaming network
- Save sent messages
- Allow delivery report
- Allow read report
No. of Attempts: 3
Photo Resolution: Original Resolution
Click DONE
This is an important thread, Ive added tags so people can find it easier when searching, If anybody else can add some more tags that would be cool. I plan on swithing to ATT after I move and will probly come back here to use this.
I have a Wing on At&t, I thought all hope was lost for me. The network wizard didn't work, and I couldn't use all my web apps. Thanks a bunch man, those settings did it for me. I'm going to repost this in the Herald forum!
OK daughter's BB Curve was stolen last week and was setting up the extra Dash that I have for a backup phone. You may want to make it a sticky
Here are the settings to send MMS on an Unlocked T-Mobile Dash.
They work on My Dash and the one I just set up.
Using an HTC s620 (unlocked Tmobile Dash) on AT&T’s network
Proxy Settings
Start>Settings>Connections>Proxy> Menu>Add
Description: AT&T WAP
Connects from: The Internet
Connects to: WAP network
Proxy (name: port): wireless.cingular.com:80
Type: HTTP
Username: (leave blank)
Password: (leave blank)
GPRS Connections
Start>Settings>Connections>GPRS>Menu>Add
Description: AT&T IMS
Connects to: The Internet
Access point: wap.cingular
User name: [email protected]
Password: CINGULAR1
Authentication Type: None
Primary DNS: (leave blank...will later default to 0.0.0.0)
Secondary DNS: (leave blank...will later default to 0.0.0.0)
IP address: (blank)
Start>Settings>Connections>GPRS>Menu>Add
Description: MEdia Net
Connects to: The Internet
Access point: wap.cingular
User name: [email protected]
Password: CINGULAR1
Authentication Type: CHAP
Primary DNS: (leave blank...will later default to 0.0.0.0)
Secondary DNS: (leave blank...will later default to 0.0.0.0)
IP address: (blank)
Advanced Connections Settings
Start>Settings>Connections>Menu>Advanced
Internet Connection: Automatic
Work Connection: Automatic
WAP Connection: Automatic
Secure WAP Connection: Automatic
Open Internet Explorer,
Menu>Tools>Options>Connections
Auto Detect Settings: Unchecked
Select Network: The Internet
MMS SETUP
(Text/Multimedia), Menu, New, MMS, Menu, Options, Message Options, Menu, MMSC Settings, Menu, New
o Name: Cingular MMS
o MMSC URL: http://mmsc.cingular.com
o WAP Gateway: wireless.cingular.com
o Port: 80
o Connect Via: The Internet
o Max. Sending Size: 300K
o WAP Version: WAP 2.0
Click Done
Menu>Set as Default
Click Done to return to the MMS Preferences Screen
Check the following boxes:
- Automatic download in home & roaming network
- Save sent messages
- Allow delivery report
- Allow read report
No. of Attempts: 3
Photo Resolution: Original Resolution
Click DONE
Forward Message