may i know where accuweather gives location code on its page? i want to get weather is a US city in a State?
Does anyone have an answer for this?
I noticed that they are broken down like this:
NAM|US|MO|SPRINGFIELD
North America, United States, Missouri, Springfield
Continent, Country, State, City
Weather only updates when connected to WiFi, not over T-Mobile's EDGE ?!
Need Location Code
Yeah me too I don't see anywhere on the Accuweather site to get the codes.
i've noticed that accuweather doesnt have the location code in the url for US cities anymore.
Try yahoo weather instead. the url for springfield,mo would be http://weather.yahoo.com/forecast/USMO0828.html and so the location code is USMO0828
any progress in this?
http://wwwa.accuweather.com/phoenix2/help/adc/pr_aviation.htm
find codes given here
jason
use the "mobile" link in left upper corner. Search for your citty.
If found, the link in navigation bar will contain the location code
example:
http://www.accuweather.com/m/EUR/NL/NL010/VEENENDAAL/weather.aspx
to use the Veenendaal citty add "EUR|NL|NL010|VEENENDAAL" to the list.
I was looking for this myself a while back and it seems they indeed no longer use the codes for US but zip codes. I had to format it as follows for it to work. My state is PA and zip is 19063, so substitute with yours:
Code:
NAM|US|PA|PC|19063
ok i flashed my at&t tilt and my weather goes by the old code and i edit but i wont save if some one as the udate plz post it
saawan said:
may i know where accuweather gives location code on its page? i want to get weather is a US city in a State?
Click to expand...
Click to collapse
may i know where accuweather gives location code on its page? i want to get weather is a adelaide city in australia?Please to tell me,thanks.
yeah i cant find the location code either. i even tried the weatherdatabase editor and that didnt work
psycho_maniac said:
yeah i cant find the location code either. i even tried the weatherdatabase editor and that didnt work
Click to expand...
Click to collapse
yeah.. i second that... which code we have to put in..
Download Weather Location Database.zip here: http://forum.xda-developers.com/showthread.php?t=487090
HTH
i ended up getting it to work with "weather master 1.3" works like a charm and weather location database wouldnt work on my phone.
gypsygirl13 said:
Download Weather Location Database.zip here: http://forum.xda-developers.com/showthread.php?t=487090
HTH
Click to expand...
Click to collapse
Thanks m'am, this helped
The easiest place to find AccuWeather location codes is probably ForecastFox, the Firefox plugin. It has a lot more locations in it than the zipped text file which is going around. Worked for me.
jroozing said:
use the "mobile" link in left upper corner. Search for your citty.
If found, the link in navigation bar will contain the location code
example:
http://www.accuweather.com/m/EUR/NL/NL010/VEENENDAAL/weather.aspx
to use the Veenendaal citty add "EUR|NL|NL010|VEENENDAAL" to the list.
Click to expand...
Click to collapse
This worked for me, thanks!
Accuweather City Codes..
Here is a page were you can download Citycodes for Accuweather:
http://forum.xda-developers.com/showthread.php?t=487090
Download: Weather Location Database.zip
Thanks guys.
try this
for USA:
Nam|US|"your abbreviated state"|"your city"
Related
is there a way to make one of the panels in the sliding panels of wm6.1 display the weather
no.... and no.
The Weather On A Sliding Panel OH! YES! YES!
Good question, whatsoever the mind can conceive and believe it can achieve, dream it in the mind then bring it into yet to be technology. That's exactly what "xfaith" has done already, check his thread out "Mini Weather (English Weather Beta) WM6.1, also be sure to check out the screen shots of the "Mini Weather" on a sliding panel. Go here to his thread http://forum.xda-developers.com/showthread.php?t=389027. He has the software that you need (mini weather 1.1 English version.zip. You can get more weather software here at http://rotlaus-software.de/forum/viewtopic.php?id=270..........!:D
Technology said:
Good question, whatsoever the mind can conceive and believe it can achieve, dream it in the mind then bring it into yet to be technology. That's exactly what "xfaith" has done already, check his thread out "Mini Weather (English Weather Beta) WM6.1, also be sure to check out the screen shots of the "Mini Weather" on a sliding panel. Go here to his thread http://forum.xda-developers.com/showthread.php?t=389027. He has the software that you need (mini weather 1.1 English version.zip. You can get more weather software here at http://rotlaus-software.de/forum/viewtopic.php?id=270..........!:D
Click to expand...
Click to collapse
Hmm...interesting. I think I'll check out this "mini weather" you're rapping about.
Interesting indeed... although not a very elegant solution Maybe we can use the other app that writes info to the registry and then read that info into a "welcome center" style panel that we can place anywhere. I guess the problem with that is, it wouldn't update very often... :/
Checked it out, works quite well for Memphis, TN, where I live. Haven't figured out how you could auto update in a useful way. Other than that and getting the cool icon panel interface, this looks promising.
OrganicM said:
Interesting indeed... although not a very elegant solution Maybe we can use the other app that writes info to the registry and then read that info into a "welcome center" style panel that we can place anywhere. I guess the problem with that is, it wouldn't update very often... :/
Click to expand...
Click to collapse
That whole making a welcome center style panel idea is a pretty good one...
It is, because it's pretty flexible... We can have PNGs (weather icons) as well as text that can place anywhere on the panel. But some of us know, the text won't update unless the homescreen is reloaded. Maybe I can write an app that will write the weather values in the security and software/chome sections of the registry as weather gets updated... Hmm...
i copied the files inside of the zip file to my phne and ran the program when i choose update now it tells me "read configuration file fail!" help!!!
You have to open your Config file in notepad, change where it says Paris, change that to your city. Next copy it to your mini weather folder.
Also where it says: "CityStartStr="
Make it say: "CityStartStr=postal_code data="
Now, do that for every line in the notepad file that says CityStartStr=.
Once you finish save and copy/paste to the appropriate directory and viola, your'e all done. You should read the readme file you got in the zip of this. It tells you how to update automatically, as often as you want. HOLLA!
does this work with the 5.99 internet hack?
OrganicM said:
It is, because it's pretty flexible... We can have PNGs (weather icons) as well as text that can place anywhere on the panel. But some of us know, the text won't update unless the homescreen is reloaded. Maybe I can write an app that will write the weather values in the security and software/chome sections of the registry as weather gets updated... Hmm...
Click to expand...
Click to collapse
I got the rafer weather to update reg values in a welcome center panel but to see the update you have to reload the homescreen. Does anyone know a command or someway to reload homescreen without selecting new home from settings panel? I know that facade has a command for this but what is it? Also, I wrote a mortscript for updating and called it from SK2URL.
that's the problem i've predicted. the only panels that update in real time that i can think of are: cclock, messagecenter, notifications and of course the appointments panel. hmm... any ideas....?
New Idea: CTestUIPlugin
I was playing with it and if you change the registry value for update in CTestPlugin, it auto updates the CTestPlugin panel on the homescreen with any new values including icons added in image registry. I think it could be possible to use this panel for weather(possible that is why it was being tested?). ! haven't tried adding pages yet.
Reaaaaaaaaalllly !?! Wow.. I gotta check that out. I always that it behaved like ht welcomecenter sytle panels. Hmmm
showaco said:
... with any new values including icons added in image registry. I think it could be possible to use this panel for weather(possible that is why it was being tested?)....
Click to expand...
Click to collapse
Got a path to that? I would REALLY love to get weather working in a 'notifications'-style panel. With the current conditions and a tiny icon when unselected, day-by-day on the pages when it has focus.
BTW, what writes the weather to the registry? Is there a way to make a pass-through the registry to a xml file, or some other output of an existing weather app? It would give a nice UI for config, detail-view, and something for the button to trigger.
Weather In A Sliding Panel
I have MSNDirect weather in one of my 26 slides and I have the national weather radar in another panel in real time. I believe this is enough weather data for me. Naw, oh I almost forgot that I have another app that connect me to the weather channel. I'm a weather freak always try to track the perfect storm...........!
I think it's possible with SPB weather. It writes its weather info to the registry. then it would be a matter of someone (maybe myself) writing a small to copy the registry entries from SPB, over to our TestUIPLugin
Technology said:
I have MSNDirect weather in one of my 26 slides and I have the national weather radar in another panel in real time. I believe this is enough weather data for me. Naw, oh I almost forgot that I have another app that connect me to the weather channel. I'm a weather freak always try to track the perfect storm...........!
Click to expand...
Click to collapse
Okaaaay... care to share how you got the national weather on a slide ? Or even the MSNDirect ?
Ask The PudgeDaddy To Send You a copy
OrganicM said:
Okaaaay... care to share how you got the national weather on a slide ? Or even the MSNDirect ?
Click to expand...
Click to collapse
Just create the paths in the two places in the registry, you know how to do it already. The PudgeDaddy is the man you want to see for the weather radar.............! As a matter of fact, I have 6 of your slides and 20 of Ricky's slides on my test device, the 6 with the TCPMP player is yours, now that one is slick.........! Now with Ricky's 6.1 ROM, I have v14 and v20 on my devices, because I believe with these versions you can be very creative, some of his other versions restrict you from being creative.....!
For Feather Weather 2, click HERE
Portrait Version Now Available!
The smallest weather app available has just gone on a diet, it started at 950kb and now comes in at a lightweight sub 850 kb. Its been slimmed down in size but not in weather data available. The new TotalClock cab has the full five day and current conditions within the clock panel itself. Check out the screenshots below, you only see one day at a time for a nice clean look. Hit the right soft key to advance thru the days and when you done, it has a timer to reset itself to current conditions after 60 seconds of non-flipping of the forecast pages.
For those who would rather have it seperate, the original version still uses a seperate forecast panel along with current conditions only in the clock panel. But even though it hasn't changed, I have managed to squeeze another 100 kb off of it.
On the original version clock panel you get info for current: temperature, icon, real feel temp, winds, humidity, visibility, barometer, uv level, cloud cover, precipitation, sunrise, sunset, air quality levels, and dewpoint. Also, on the clock panel you get tomorrow's forecast: conditions, hi/lo temperatures, real feel high temps, winds, and estimated precipitation.
On condensed clock panel, there is current temp, current condition icon, time, and todays Hi/Lo temperatures. So if you dock your clock, you will always have weather and time showing on homescreen.
And for a full forecast, there is a 5 day forecast panel that can be enabled or disabled. The forecast pages have info for: day, date, conditions, hi/lo temperatures, precipitation estimates, uv levels, and winds expected.
Both have a user set time interval for the updates depending on your needs, wants, or data plans. Just go to setup and specify the interval in minutes. The default is 30 minutes. The forecast data updates every 8th time weather update runs, that way you get updated forecast info every 4 hrs if you use the default for current condition updates.
To install: For now, install to main memory, I'm working on either or version.
Download the cab. After installation, it should prompt you to restart. If it doesn't, then restart your phone to set new clock panel in place. After reboot, wait about 10 seconds and the FeatherOptions will run automatically. Go to Setup and set all of your info, good idea to go ahead and set your right soft key on the clock panel at this time. After setup, exit options by selecting "Run Weather Update and Exit".
That's it, your done.
NOTE: I beleive I worked out my problem with mortscript registering itself, but if it doesn't auto start the options after 10 seconds, then go to FeatherWeather folder in Program Files and click on Mortscript.exe .
To uninstall: First download the ResetClockPanel.zip below. Unzip and then place the .mscr file on your phone. Run it with File Explorer, this will reset your clock panel. Now go to Settings/Remove Programs and uninstall the cab.
City Location Codes:
For anyone that needs to find their city code, use this link and change the location in this url to the name of your city and then go to it and it will give a list of all cities worldwide that have that name. Get your location from there and enter it exactly as it appears in the quotes, but do not use the quotes.
http://hadle.accu-weather.com/widget/hadle/city-find.asp?location=calcutta
So, for this link above, if you were looking for Calcutta, India. Go to this link, and you will see a line like this:
<location cnt="1" city="Calcutta" state="India(Bangla)" location="ASI|IN|IN036|CALCUTTA" />
So your location to enter in to options would be :
ASI|IN|IN036|CALCUTTA
This should work for cities worldwide.
Feather currently is installed with a slim panel layout only. If you want more dll or cpr options, they are easily installed with FileChanger. Those are more homescreen customizations than they are weather customization, thats why they aren't in here.
For landscape phones: If you don't want the slim panels, I have standard panels cpr and mini panels cpr that work specifically with FeatherWeather. They are in the Featherscprs.zip below. Just install with the FileChanger app or copy into windows folder. Click on the File Changer in my signature below for the File Changer thread and download.
New Portrait versions below, the last 2 cabs that names end with "P" are the portrait versions. Portrait versions updated 8/19/08 with new cpr. If you already installed, you can download the cpr zip only and install to windows directory.
Check out these new portrait layouts provided by Kron2:
Make sure you get the landscape or portrait version you need, first 2 are Landscape, last 2 are Portrait
NOTE: There was a slight change in the feed. So after installing one of these cabs, please go to Post #101 and download the forecast fix.
showaco said:
Here's the smallest Weather app available. It weighs in at only 950 kb. Its been slimmed down in size but not in weather data available. It has current conditions and a five day forecast.
On the clock panel you get info for current: temperature, icon, real feel temp, winds, humidity, visibility, barometer, uv level, cloud cover, precipitation, sunrise, sunset, air quality levels, and dewpoint. Also, on the clock panel you get tomorrow's forecast: conditions, hi/lo temperatures, real feel high temps, winds, and estimated precipitation.
On condensed clock panel, there is current temp, current condition icon, time, and todays Hi/Lo temperatures. So if you dock your clock, you will always have weather and time showing on homescreen.
And for a full forecast, there is a 5 day forecast panel that can be enabled or disabled. The forecast pages have info for: day, date, conditions, hi/lo temperatures, precipitation estimates, uv levels, and winds expected.
It has a user set time interval for the updates depending on your needs, wants, or data plans. Just go to setup and specify the interval in minutes. The default is 30 minutes. The forecast data updates every 8th time weather update runs, that way you get updated forecast info every 4 hrs if you use the default for current condition updates.
To install: Download the cab or the zip file. The zip file has the exe file for installing thru ActiveSync, just unzip it first. After installation, it should prompt you to restart. If it doesn't, then restart your phone to set new clock panel in place. After reboot, go to start menu and run FeatherOptions. Go to Setup and set all of your info. After setup, exit options by selecting "Run Weather Update and Exit".
That's it, your done.
To uninstall: Go to Settings, Remove Programs and uninstall the cab. It won't change your clock panel back, but it will remove everything else. To revert clock panel back, install an original cpr or cpr of your choice.
Feather currently uses a slim panel layout, but I will add more support if anyone wants standard or fat panels. If you want more dll or cpr options, they are easily installed with FileChanger. Those are more homescreen customizations than they are weather customization, thats why they aren't in here.
Click to expand...
Click to collapse
how is it that you have 3g on that phone what service provider do you have?
RussianSolja said:
how is it that you have 3g on that phone what service provider do you have?
Click to expand...
Click to collapse
show doesn't have a dash. he has a blackjack and is on the at&t network
pudgedaddy said:
show doesn't have a dash. he has a blackjack and is on the at&t network
Click to expand...
Click to collapse
shhhhh!! I'm masquerading as a dash.
Nice and sweet and at that size, I'm downloading now and disabling NRG Mini Weather to see how it compares but the size is the enticing factor me, cool, thanks
First post updated with two new cabs, here are the standard sized panels and the mini sized panels cprs that work with Feather below in the zip file. I also included the slim cpr for going back to.
Good weather application. Seems nice, but I will give it a shot later to see how it works...
showaco are you going to make Feather weather for 240x320 screen i have a shadow and would love to try your weather loveing your sports app
kron2 said:
showaco are you going to make Feather weather for 240x320 screen i have a shadow and would love to try your weather loveing your sports app
Click to expand...
Click to collapse
The app only needs the cpr file adjusted for the clock panel layout to be ready to go. I have no way to test the layout, so it would be a total guess. If someone wants to make the cpr, or I could post a test version. A test version would probably have to be tweaked after installed to get the layout just right. You want to test? I can take a stab at the layout if you want to finish the final tweaking of positions.
Edit: If you want to pm me your email, I have a test cpr ready if you want to try it.
When I try and run Feather Options, I get and error: There is no application associated with "FeatherOptions"
I installed the CAB to the device memory. I get a generic clock icon and some weather info.
Thanks for any help, and of course for the nice plugin (once I can get it to work) I'm on a Moto Q Global.
braj108 said:
When I try and run Feather Options, I get and error: There is no application associated with "FeatherOptions"
I installed the CAB to the device memory. I get a generic clock icon and some weather info.
Thanks for any help, and of course for the nice plugin (once I can get it to work) I'm on a Moto Q Global.
Click to expand...
Click to collapse
Sometimes mortscript doesn't register correctly on my cab installs. Go to program files\featherweather and find the mortscript.exe. Click on it and it will say that the extentions are registered. Now try again.
showaco said:
Sometimes mortscript doesn't register correctly on my cab installs. Go to program files\featherweather and find the mortscript.exe. Click on it and it will say that the extentions are registered. Now try again.
Click to expand...
Click to collapse
Awesome, thanks for the quick reply. Now I can run setup and get a forecast, but I still don't have a image, it shown a grainy white clock placeholder.
But progress has been made!
I just tried to uninstall this until I get the display issue resolved, and I get the following error occasionally: Cannot execute \Program Filea\FeatherWeather\Feather.exe
Please help.
braj108 said:
I just tried to uninstall this until I get the display issue resolved, and I get the following error occasionally: Cannot execute \Program Filea\FeatherWeather\Feather.exe
Please help.
Click to expand...
Click to collapse
download sktools lite, its free. With it you can remove the notifications which are causing the error. If you want to reinstall, let me know which version you are using and I will get your icon fixed. If its the total clock version, the reason you didn't get the icon is because of not mortscript not registering at the beginning. It writes the value for the iconpath when the reboot occurs, but it needs mortscript to do it. Its an easy fix. After install, if mort doesn't register again, then reregister mortscipt again. After that, while you are in the featherweather folder, click on install.mscr. This will setup your icon for the clock panel and start your setup when it finishes.
I just reinstalled and rebooted my phone, and when the plugin came up, all seemed good then the screen died! It couldn't come on. I just got the phone and the first one AT&T shipped me had a bad backlight so I thought the worst, then I pulled the battery and rebooted again. Now the sun is shining gloriously on my Q Thanks, it was a little rocky but it sure looks nice. I really appreciate teh help getting this running, kudos to you sir.
braj108 said:
I just reinstalled and rebooted my phone, and when the plugin came up, all seemed good then the screen died! It couldn't come on. I just got the phone and the first one AT&T shipped me had a bad backlight so I thought the worst, then I pulled the battery and rebooted again. Now the sun is shining gloriously on my Q Thanks, it was a little rocky but it sure looks nice. I really appreciate teh help getting this running, kudos to you sir.
Click to expand...
Click to collapse
No problem, I'm still trying to figure out why mort doesn't always register correctly because thats the culprit in most problems that have been reported.
Portrait version is now available for download in post #1. Huge Thanks go to Kron2 for the work on the cpr layout for these two new portrait cabs.
I have installed the portrait total clock version in my HTC VOX. It runs fine. But it is not updating weather for my town. I live in Calcutta, India. After a lot of googling for getting accuweather codes, I tried the following in settings but none seemed to work.
ASI/IN/IN036/CALCUTTA
"ASI/IN/IN036/CALCUTTA"
INO36
CALCUTTA
Can anybody help me as to how to insert the code for my hometown Calcutta as I have liked the application very much and does not feel to ditch the same. Although it is not a forum for VOX I had to write in this forum as there are no threads for Feather weather in VOX forum.
Moreover, would anybody please give the link to the slide homescreen in Portrait version as posted in post no. 1.
Thanks in advance.
parthabhatta said:
I have installed the portrait total clock version in my HTC VOX. It runs fine. But it is not updating weather for my town. I live in Calcutta, India. After a lot of googling for getting accuweather codes, I tried the following in settings but none seemed to work.
ASI/IN/IN036/CALCUTTA
"ASI/IN/IN036/CALCUTTA"
INO36
CALCUTTA
Can anybody help me as to how to insert the code for my hometown Calcutta as I have liked the application very much and does not feel to ditch the same. Although it is not a forum for VOX I had to write in this forum as there are no threads for Feather weather in VOX forum.
Moreover, would anybody please give the link to the slide homescreen in Portrait version as posted in post no. 1.
Thanks in advance.
Click to expand...
Click to collapse
You have the right code, sort of. instead of "/" , you need "|". I tried it and it works, so for you code enter:
ASI|IN|IN036|CALCUTTA
For the theme, thats Kron2's theme. You may be able to find it at allshadow.com or by contacting him.
For anyone that need to find their city code, use this link and change the location in this url to the name of your city and then go to it and it will give a list of all cities worldwide that have that name. Get your location from there and enter it exactly as it appears in the quotes, but do not use the quotes.
http://hadle.accu-weather.com/widget/hadle/city-find.asp?location=calcutta
First of all i am very sorry to ask this stupid question as you have narrated the same example in your post 1. Actually I was too excited and overlooked that part. Anyway I am trying to find out the "|" character in my keyboard. Many thanks to you.
just got my wonderful Blackstone and Im really enjoying it besides the usual slow non user friendly WM bugs/"features"
A problem for me just know is that I cant add my hometown Uppsala to the Weather, I surf to the accuweather site and copy the code for Uppsala and start the weather database and go to Sweden, city, add city, and I get the window up to add Uppsala but I cant paste the weather code from accuweather, there is no copy/paste function in the weather database, neither in the menus and I cant press the screen and get a "mouse" menu for that either. I have tried paste the weather code to notepad so I know its there in the memory.
Anyone got an solution?
Edit : *nevermind*
use this (see attachement)
very nice application.
How do you find the accuweather code?
g
Are you dumb ???? gkagad. On acccuweather.com ...... go to international for outside US
PS: Search a little before asking or nobody will answer.
Besides WeatherDatabaseEditor you also need NETCFv35
Go to www.accuweather.com and typ your city followed by yoyr country.
http://i33.tinypic.com/dykdjn.jpg
Click on "GO".
You see then a code in your adresbar ( EUR|NL|NL008|AALSMEER ) write down the code.
http://i34.tinypic.com/23j0ax0.jpg
-Open now WeatherDatabaseEditor on your device.
http://i35.tinypic.com/j7953s.jpg
-Scroll to your country and go to "edit".
-Now go to "Cities".
http://i36.tinypic.com/zl9htc.jpg
-Click on "Edit" and go to "Add City".
-"state" blanco.
-Type by City your city.
-Type now by "Accu Weather Code" your code from your city.
http://i36.tinypic.com/sb1wdg.jpg
-Click on "OK".
-Know your see your added city.
http://i38.tinypic.com/2ibgl5l.jpg
-Exit WeatherDatabaseEditor
-Go in the TF3D menu to the "wheather Tab"
-Click on menu go to "Ad city"
http://i36.tinypic.com/2iuov47.jpg
-Go to your country en ad your city.
Update...
http://i34.tinypic.com/2ppni1t.jpg[/img][img]http://i35.tinypic.com/27yn5gj.jpg
Actually, I've done everything, step by sep, as you have advised, but neither can I see Saint Bees (UK) in the editor, nor in the TF3D.
Any help?
Sorry, now, somehow it worked.
Thanks
No Code
I've tried to add a city (Squaw Valley) by using the steps stated above but to no avail.
First, I'm not getting a code in my address bar when I type in the city and state. I'm getting this instead -
http://www.accuweather.com/us/ca/sq...recast.asp?partner=accuweather&u=1&traveler=1
So I went into the WeatherDataBaseEditor app on my device and looked at how the other US cities were put in. I typed in the same info with the exception of the city name of course.
The result is Squaw Valley is now in my listings for adding a location but the weather is incorrect and the forecast is also incorrect.
Any help would be much appreciated.
thanx for helping, too bad it doesnt support copy and paste... I aint gonna add a city untill it does
O yeah! I fixed it! Ty kokkie
hi
is it possible to add forecast from anther sits, like: http://weather.weatherbug.com an not only from ACCU?
thx
Just wanted to add, the v1.2 cab works perfectly on my HD
hobs0n said:
too bad it doesnt support copy and paste... I aint gonna add a city untill it does
Click to expand...
Click to collapse
Haha this is Scandinavian humour? Right???
If not, and you are really so lazy you can't be arsed to type twenty characters or so, then fire up the standard windows keyboard (it has a Ctl key) and use Ctl-V to paste it in (that's what I did).
HTH
Pandemoniumone said:
First, I'm not getting a code in my address bar when I type in the city and state. I'm getting this instead -
http://www.accuweather.com/us/ca/sq...recast.asp?partner=accuweather&u=1&traveler=1
Click to expand...
Click to collapse
You need use the world weather site, there is a link on the US site homepage.
Hehe ok Ill use that if I need, its mostly because I really dont need another city at this time
Thanks so much for the help gadgetUK437, it worked perfectly!
kokkie said:
Besides WeatherDatabaseEditor you also need NETCFv35
Go to www.accuweather.com and typ your city followed by yoyr country.
http://i33.tinypic.com/dykdjn.jpg
Click on "GO".
You see then a code in your adresbar ( EUR|NL|NL008|AALSMEER ) write down the code.
http://i34.tinypic.com/23j0ax0.jpg
-Open now WeatherDatabaseEditor on your device.
http://i35.tinypic.com/j7953s.jpg
-Scroll to your country and go to "edit".
-Now go to "Cities".
http://i36.tinypic.com/zl9htc.jpg
-Click on "Edit" and go to "Add City".
-"state" blanco.
-Type by City your city.
-Type now by "Accu Weather Code" your code from your city.
http://i36.tinypic.com/sb1wdg.jpg
-Click on "OK".
-Know your see your added city.
http://i38.tinypic.com/2ibgl5l.jpg
-Exit WeatherDatabaseEditor
-Go in the TF3D menu to the "wheather Tab"
-Click on menu go to "Ad city"
http://i36.tinypic.com/2iuov47.jpg
-Go to your country en ad your city.
Update...
http://i34.tinypic.com/2ppni1t.jpg[/img][img]http://i35.tinypic.com/27yn5gj.jpg
Click to expand...
Click to collapse
Why don't work on HTC Touch 3g?
I have installed the weather database editor. But when I want to open the application, I receive the follow error 'File write protection of databse could't removed'
Is there someone that me can help with slove this issue.
Any resolution to the "File write protection of databse could't removed" issue? I'm using a Touch HD.
yeah same error here to using duttys latest 6.1 rom ,maybe that has something to do with it?
piebobs said:
yeah same error here to using duttys latest 6.1 rom ,maybe that has something to do with it?
Click to expand...
Click to collapse
& Miri_WM65_23017_Premium_Manila_2.5_REV7.1 .Same problem
I've been tying to add my town to the weather tab, and all the directions are so confusing I have the weather database editor and total comander. I just cant figure out to do, can someone give me simple instructions plz?!
I use a program called Weather City Editor, and it works like a charm. It's very simple, don't have to go in and edit any files. You just run the program, select country and state, add a city, enter the info for the city, and tap the "Add" soft key.
Available here:
http://forum.xda-developers.com/showthread.php?t=546141
New City does not work
Hello I even tried to add 2 cities
Weiden, GER as EUR|DE|GM002|WEIDEN
Gilching, Ger as EUR|DE|GM002|GILCHING
both are selectable. But when I try to update the weather data, I get some error message.
"During the update, there has been a connection error. Try again?" (Same for activesync, wifi and GSM connection)
I never got an update of Weiden and Gilching.
Even tried the sqlite way for adding cities.
Any hints?
Solution:
-----------
Found myself a solution I have reinstalled "Wether Databese Editor" and it worked!
It seemd that the reg entry from a post I found was not correct or sufficient.
(German t-moble stockrom wm6.5)
i know it's mentioned in the annoyances sticky ....
23. The device sometimes thinks you're somewhere you're not. Gives you the wrong weather and/or time. Submitted by Phil750123.
Workaround: Remove your clock widget and add it back. Manually select your location.
Click to expand...
Click to collapse
but it's not quite that. i'm in liverpool and all of a sudden the location changes to birkenhead. it says 2/2 and left me flip between the 2 locations but i can only delete liverpool. the option is greyed out for birkenhead.
anyway to remove birky?
--------
ok, removing it and adding it again - but, with choosing 'current location' then means i have liverpool, and liverpool current lcoation entered.
odd but at least no birkenhead any more
The problem i have is the phone says i am in Bamber Bridge, when i am in fact in Leyland. When i search for Leyland, it says no match found. Leyland is a pretty large town (well larger than Bamber Bridge) which is famous for its industry, they should at least add the location!