Develop Bugs

I need some suggestions...

Hi everyone,
i am new to Hermes site, i used to have wizard and knew how to unlock or flush any rom to that phone.
Tomorrow i am getting cingular 8525 which i am planning to use in T-mobile here in US. the phone I am getting is going to be refurbished phone. At&T is replacing the phone purchased back in February of this year.
I know I have to unlock it before I use it with t-mobile. I have read two ways of unlocking it one way is using HTC_Hermes_SIM_CID_Unlock_v3a.zip file but at the same time I read about this way "SIM-Unlock SoftBank X01ht post April (white versions) with radio 1.14.01.10".
since the phone will be refurbished phone, should I treat it as new out of bax when unlocking it? which way should I chose to unlock?
I only have T-mobile sim card, do you think i will need at&t sim card to unlock this phone?
after the unlock I am planning to upgrade it to wm6 and I saw many good roms here: Official HTC rom, Black Magic, Black Satin...which one of these would you guys recommend me to use?
Thank you in advance.
K

so many views no reply?
can any one give suggestions?

Use the HTC Hermes SIM_CID_Unlock v3a. Worked like a charm for me. It will CID and SIM unlock so you can install whatever rom and use whatever carrier you wanted. You don't need an ATT sim to unlock it either...just follow the step by step instructions that come with the unlocker.

I used the Hacked Radio Version way to unlock mine
worked exactly as it said
and then i SuperCID mine...or you could just use OliPRO

I need an Explanation

Hey everyone, I'm new here so thank you all in advance for the Help.
I've recently acquired an HTC Diamond GSM phone. I live here in America and the phone was regionalized on a french carrier so I began my search on how to flash the firmware, thus ,hopefully, unlocking it. I stumbled across this site and after hours of reading the forums I was ready to try the three step process described on the [TUT] tutorial. I upgraded to Olinex 1.40 SPL, that worked flawlessly. Then I upgraded the radio to 1.0.25.23, worked. Finally I updated the ROM to DIAMING Ultimate xxxx I know its based off the 2.0.3 official. That also worked great. Mind you I was doing all this without a sim in the phone. Now it was time to put my SIM in the phone and get started right?
*** Side note*** My previos phone was a Sony Ericcson w810i that I also needed to flash/unlock. My SIM has worked perfectly in this phone for 2-3 years.
When I boot up the phone with my SIM in it get all the way to the Windows Mobile Desktop when it pops up with "Network Locked, Please Enter Unlock Code," or something to that effect. I went to my ATT account website and got a PUK code that supposedly unlocks your SIM for you, however I entered it twice and it didn't work. (I was told 10 straight failure locks your SIM permanently So i dind't go any further).
Basically I'd like to know what I've done wrong, or is there something I'm not understanding. Thanks again

Your phone is locked
So you bought a phone on ebay or something and it's locked to a carrier != your carrier. Flashing the ROM/Radio will not unlock the phone. You need to get an unlocker. I think Olinex? The guy who wrote the HardSPL that you used in the first step of the tutorial sells one for a good price. Contact him. I think there is/was a sticky thread in here or the General Diamond that specifically states this and who to contact.

Help: Several questions about unlock

Hi every one, my phone model is HTC Hermes 8525 locked to Att. Now it is in original box with Windows Mobile 5. I want to unlock it first. I have read articles on this BBS and aware that if I want to do future Rom flashing things I might need both SIM and CID unlocked. At same time I found several unlock code provider on Ebay.com. Now the questions come up.
1) Is Unlock code got via Ebay only for SIM unlock, or it is for both?
2) Is there any risk for such kind of unlock code for my phone? What's the worst outcome for using unlocker software downloaded here?
3) If I don't unlock my CID, can I still upgrade my phone with WM6? What specific ROM of WM6 shall I use?
4) Any other suggestion is welcomed, Ad's also.
Thanks a head

bopomofo said:
Hi every one, my phone model is HTC Hermes 8525 locked to Att. Now it is in original box with Windows Mobile 5. I want to unlock it first. I have read articles on this BBS and aware that if I want to do future Rom flashing things I might need both SIM and CID unlocked. At same time I found several unlock code provider on Ebay.com. Now the questions come up.
1) Is Unlock code got via Ebay only for SIM unlock, or it is for both?
2) Is there any risk for such kind of unlock code for my phone? What's the worst outcome for using unlocker software downloaded here?
3) If I don't unlock my CID, can I still upgrade my phone with WM6? What specific ROM of WM6 shall I use?
4) Any other suggestion is welcomed, Ad's also.
Thanks a head
Click to expand...
Click to collapse
Hi and welcome to xda-developers forum!
1) I think this "unlock code" will provide you an ability to disable/re-enable SIM Lock/Operator Lock, not CID Lock (as it's platform specific and required to flash unofficial ROMs)
2) The worst is device will become brick. But it could occur only if you download and flash wrong ROM.
3) No, if it's unofficial. If HTC provided a WM6 update to Hermes (I don't remember), it could be flashed.
Good luck

respond
i just got that phone, i found a guy on youtube for the sim unlock, it worked for my phone , now it runs a tmobile sim card ya. not sure what cid a nd all that is, on youtube most people dont give details on how to get things done but there is the one guy for the sim. next i upgraded to wm6 using a google search and deciphering through all the bull****, then i used xda for wm6.1. it all worked and i dont know **** so u should be fine, if you know how to unzip and do things with files and alwas look for exe. extentsion, that ones usually money, im trying to upgrade to 6.5 but im getting errors, first time im having propblems, so let me know anybody, about that. good luck

What phone do you have?

a couple of noob questions. hope you guys can help

i had previously accidentally posted this in the xperia section but i meant for it to be here but
im getting my tilt 2 tommorow
i ordered it online from amazon contract free ($500)
so i have some questions
1. is it sim unlocked? or will i have to go get an unlock code from att
2. will it automatically add a data plan if i put in my att sim card onto it?
(if so is there a way to bypass this)
3. whats hte diffference between cid unlocking and sim unlocking. is there away to do both in 1 method

No, it isn't SIM unlocked.
No, it will not add a data plan to your AT&T account if you put the SIM in.
SIM unlock allows you to use other SIMs in your device. CID unlocking allows you to flash any signed HTC ROM (For example, you could flash a Vodafone or a TMobile USA ROM on your Tilt2). CID unlocking really isn't necessary for most people since most people use HardSPL, but you can SIM, Security, and CID unlock with this tool here. It costs money for most people, but it's really worth it since it does all three types of unlocks.
Since you are new to the HTC Rhodium, I encourage you to read the wiki article and all stickies posted around the Rhodium forums, as well as the annoucement at the top. Hope that helps

DaveTheTytnIIGuy said:
No, it isn't SIM unlocked.
No, it will not add a data plan to your AT&T account if you put the SIM in.
SIM unlock allows you to use other SIMs in your device. CID unlocking allows you to flash any signed HTC ROM (For example, you could flash a Vodafone or a TMobile USA ROM on your Tilt2). CID unlocking really isn't necessary for most people since most people use HardSPL, but you can SIM, Security, and CID unlock with this tool here. It costs money for most people, but it's really worth it since it does all three types of unlocks.
Since you are new to the HTC Rhodium, I encourage you to read the wiki article and all stickies posted around the Rhodium forums, as well as the annoucement at the top. Hope that helps
Click to expand...
Click to collapse
1. ok thankyou so i shud ask att for an unlock code if i want to use it in china?/out of US
2. ohreally? i wasnt sure about this because when i went to att store and asked to buy a contract free tilt2, the guy said that they wud add a 30 dollar data plan to my line so it was really confusing
3. what about all of these roms that people are making on this forums do i need to cid unlock to use them?
oh new question are all these roms on the internet like windowsmobile specific? like will 1 rom work with 6.1 and another work with 6.5 or do they all work together

You could use an unlock code from AT&T, or use the tool I linked to in my post. As I said, it's $15, but it's very much worth it since it SIM unlocks, the money is used for good purposes, and it CID and Security unlocks as well.
While they may try to sell you a data plan when you buy it, they can't add a data plan when you insert your SIM
A CID unlock is not required to use the cooked ROMs on this forum. To use the custom ROMs on this forum, you need HardSPL. CID unlocking only allows you to use signed HTC ROMs, meaning that you can flash a TMobile ROM onto your AT&T Tilt while still running stock bootloader. However, CID unlocking won't let you run the custom ROMs you'll find online, since they aren't signed by HTC.
I'm afraid I don't understand your last question, sorry.

oh i mean do all of these roms work with windows mobile 6.5 and 6.1? or only one and not the other

All ROMs are only Windows Mobile 6.1 or only 6.5. If you flash a 6.5 ROM onto you device, you will be running windows mobile 6.5. Same for 6.1. There is no way for two versions of WM to coexist on the same device (that I know of).

where do i put cab files?

jopherr said:
oh i mean do all of these roms work with windows mobile 6.5 and 6.1? or only one and not the other
Click to expand...
Click to collapse
The ROM totally replaces everything (including Windows) on the device.

jopherr said:
where do i put cab files?
Click to expand...
Click to collapse
You put them on the device. To install them, you browse to them in File explorer mobile, then tap on them, and they will install.

what about roms?
how do i put them on my phone
i did hte hard spl thing already

jopherr said:
what about roms?
how do i put them on my phone
i did hte hard spl thing already
Click to expand...
Click to collapse
Follow the instructions here, and skip over the HardSPL part if you've already HardSPL'd.
Also, since you've finally recieved your device, I encourage you to read the Rhodium Wiki, as well as all the stickies around the forum.

[Q] how to upgrade ROM for htc tp2 sim jailbreak

Hi all
I am using HTC TOUCH PRO2 and done SIM unlock
and now i want to upgrade for ROM update to window mobile 6.5
i have doubt that " if i upgrade to new rom version , should i again go for my sim unlocker"
Does any one tried this
please send me a solution

Here is a link to get you started: http://forum.xda-developers.com/forumdisplay.php?f=490 - read the first two threads
If your phone is cdma then make sure you use a cdma rom which can be found here: http://forum.ppcgeeks.com/cdma-tp2-upgrades/
With the sim unlocker it all really depends. I have a sprint tp2 running on at&t and i normally flash the radio unlocker whenever i task 29 before a flash. It seems that if i don't do that then the unlocker doesn't seem to work all the time.

my experience.
hi i have a tilt 2 sim unlocked, and i just upgraded the rom to the at&t last release. i feared i was going to lost the sim unlock, but to my surprise, it was untouched, im now running it smoothly. only now i need to config the data plan back, as this config was erased. any help with that? my carrier is telcel from mexico