Related
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Which ROM did u reflashed ?
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
hello there..i've also got the same problem....i've download he rom update software from 02 uk...after install in my exec...and hard reset..it hang in the boot screenn...
please help..all the pda genius....!!!!!!!!!!!!!!!!! i'm worried!!!!!!!!!!
Acer said:
somebody please help ... just flashed my xda exec with the latest rom and now it won't start... When trying to hard reset it and just after pressing "0" in the white screen it won't boot... I plug in the mains charger and the orange light won't show either (so I can't know if it's charging). I'm not quite sure but I suspect that the main battery's red plastic lock-switch was in the "unlock" position during the flashing (but the battery was 100% full just before). Is that relevant ? Could this have drained the backup battery and that's the reason that it won't boot now ?? please help...
Click to expand...
Click to collapse
i've also got the same problem...i've update the rom after dwnloas the rom software update from o2 uk....after suceesfull install to my exec...i've hard reset as per instruction.....but..it just hang in the boot screen mode...
please helppppp all the pda guru's and master!!!!!!!!!!1 i'm worried!!!!!!!!!
Have u tried reflashing it again via bootloader mode ?
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
... what's the "bootloader mode" ??... (it's not documented in the user guide, is that a sequence after pressing 2-3 buttons together or something like that ?)
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
niketkumar said:
Have u tried reflashing it again via bootloader mode ?
Click to expand...
Click to collapse
dear kumar..i've tried for a few times...eventually i've tried to reinstall using the old rom..but its still hang....
i've contact o2 custpmer support ..they asked me to send it to the service centre...then i ask how to send and the charge would be (eventully i'm in malaysia right now) but they ask me to call the service and warranty centre personnally..
i've called them but the line was so bad and can't hear them clearly. Even so i've given my email address for them to email me their correct address for me to sent it..and their email address for me to communicate..but until now..no news....
please help me sir!!!
U shld better get it replaced .
niketkumar said:
Which ROM did u reflashed ?
Click to expand...
Click to collapse
What ROM did you guys flash? My suspicion is rising that one of the new AKU3.2 ROMS is the culprate, and that there is something wrong with one of them.
niketkumar said:
Put the Universal in bootloader mode by pressing Power + Light + Reset, which brings up an un-backlit screen with "Serial" at the top, and "v0.XX" at the bottom. (A lot of people get an error message if they are not in bootloader mode. They can install the ROM a second time. If you are in bootloader mode, you won't get an error message.)
Click to expand...
Click to collapse
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
No need 4 thanx buddy this is just we all r here for to help each other neways i m happy to hear dat u got it rite.
still stuck at serial and 1.00
hi.. i had installed WM6 on my o2 exec, i dont know why but had some signal issues with it, so i tried to roll back to 1.30 from the official O2 site... 1st time i tried to update, the PDA got reset just at the begining of the checking process... i tried again 2nd time this timed it just died.. now hard reset as well as the bootloader both just get stuck at the same damn screen "Seria" on top and "1.00" at the bottom.. i've kept the piece on charging for several hours now... no matter what i do, nothing happens.. just the same screne for hrs and hrs and hrs.. i removed the battrey and put it back... stil the same screen... someone pls advice... its just breaking my heart..
trouble with rom update
Like Acer, my device has a trouble with the rom too. In this case, I'm trying in bootloader mode but the rom doesn't instal. The first screen shows only the rom which is going to upgrade and when instalation finishes nothing was upgraded. Can you help me?
Acer said:
It worked !! I managed to flash it OK this time !... Thanks a lot mate !!
Click to expand...
Click to collapse
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
blank screen
i too had the same problem, after installing the rom update from o2 site...
i had to send my set to servicing then only i got it right..
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
I do not know how, but now my Uni work again
and now, I install Pdaviet 2.10.10
It's working now .....
I had the same problem, i had to send it to the O2 repair canter, they fixed it, but was returned with out the up grade, now im afraid to re-try.
alfa2005 said:
OMG, I have the same problem as you did:
I flashed my Uni with ROM Pdaviet 2.10.10 clean version.
Now, my Uni cannot boot at all
I have tried to enter to bootloader ..... but it still does not work at all
Please, all master of ROMs, help me ......
Thanks
Click to expand...
Click to collapse
Got the same problem here after using PDAVIET...
No upgrade working
This happens with the uni sometimes regardless of rom. Remove the battery wait 5 minutes enter bootloader and reflash. If it doesnt work reflash again just the CE os rom. It will kick out in one of those. It usually helps to flash to operator stock rom first then back to wm6 or cooked WM5. (You have not hurt the device, the uni is a picky girl but always comes back
Today i tried to flash my PDA back to amazing artemis 1.0
beacuse i like it
but i had stuck in my computer I stoped flashing but my mobile is not working and not charging
it's not macking boot loade mode
please help me
sorry for my bad english
remove battery during several minutes and try again to enter in boot loader.
thank you brother ofter remove th battery for 10 minutes the mobile worked on boot loader
thanx bro
How to entering into the Boot Mode my P3300?
lefteris said:
How to entering into the Boot Mode my P3300?
Click to expand...
Click to collapse
You can find it in the Artemis Wiki, this is the page you'd have found - http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
lefteris said:
How to entering into the Boot Mode my P3300?
Click to expand...
Click to collapse
Hi bro, hold on the voice-dail button (record button), & hold the power button at the sametime. then wait several seconds, you'll get the multi-color screen.
now it's time to plugin the usb for upgrading or recovering.
I met the problem that it always failed when the progress was 3%. i downloaded several roms from internet. how could i know which rom is correct for my device(p800 in China). Besides, my device could just enter the boot mode, so it's impossible to unlock spl for it.
and The worst thing is that there are several hours(not minutes) between each time to power on it. It means i should wait 1 or 2 or 3 hours (who the hell know) to re-flash it after i was failed to flash previously.
is anybody had the same experience. that's really make me crazy.
THANKYOU MR Sanco60 THANKYOU VERY MUCH FOR YOUR IDEA OF SWITHCH ON IN BOOT THANKYOU MY DEAD MOBILE NOW SHINES
sanco60 said:
Hi bro, hold on the voice-dail button (record button), & hold the power button at the sametime. then wait several seconds, you'll get the multi-color screen.
now it's time to plugin the usb for upgrading or recovering.
I met the problem that it always failed when the progress was 3%. i downloaded several roms from internet. how could i know which rom is correct for my device(p800 in China). Besides, my device could just enter the boot mode, so it's impossible to unlock spl for it.
and The worst thing is that there are several hours(not minutes) between each time to power on it. It means i should wait 1 or 2 or 3 hours (who the hell know) to re-flash it after i was failed to flash previously.
is anybody had the same experience. that's really make me crazy.
Click to expand...
Click to collapse
Hi,
you've removed the microSD, right?
If yes, did you try with the original ROM for the P3300?
p800=p3300, but i'm not 100% sure...
bye,
Silvio
Hello Guys,
I have the same problem with my P3300.
The problem is that the phone do not start and I cant put in the cooked rom because I did not make the Uspl when it was still alive.
Is it possible to USPL the rom also if is not connected whit activesync?
Thanks beforehands!
fabio
[email protected] said:
Hello Guys,
I have the same problem with my P3300.
The problem is that the phone do not start and I cant put in the cooked rom because I did not make the Uspl when it was still alive.
Is it possible to USPL the rom also if is not connected whit activesync?
Thanks beforehands!
fabio
Click to expand...
Click to collapse
Hi
Original ROM? Didn't work?
O.T.: Are you Italian?
Bye,
Silvio
Ciao Silvio!
yes I'm Italian, thank you for the reply.
I had the original ROM, but now the phone is broken, if I try to switch it on the system go in crash in few seconds.
i tried to put in in bootloader mode (colored screen), but i can not load in ROM because the process crash when is at 3%, can I USPL the ROM from the sd card or when is off?
Thanks,
Fabio
[email protected] said:
Ciao Silvio!
yes I'm Italian, thank you for the reply.
I had the original ROM, but now the phone is broken, if I try to switch it on the system go in crash in few seconds.
i tried to put in in bootloader mode (colored screen), but i can not load in ROM because the process crash when is at 3%, can I USPL the ROM from the sd card or when is off?
Thanks,
Fabio
Click to expand...
Click to collapse
Are you sure that have you removed the SD card when you flash?
O.T.: me too, if you prefer to speak italian with me you can write in Italian in O.T. but you must wrote also in english
Bye Silvio
P.S. I don't speak English very well
Yes the Sd is off,
PS: Compared with mine your English is good
[email protected] said:
Yes the Sd is off,
PS: Compared with mine your English is good
Click to expand...
Click to collapse
ok, but you have the SPL blocked?
P.S. I don't think...
Yes unfortunately....
you can try to extract the nbh file from the executable of the original ROM and with SD Flash but I'm not sure ... I'm sorry, now I must run away, see you tomorrow
Bye,
Silvio
. I don't speak English bat understain
Compared with mine your English is good
Compared with mine your English is good
please help please!!!!!!!!!
my htc arte 100 is not enter a boot menu.tricolors screen and IPL1.13.0001,SPL1.1.13.0000
activesync is reconizet this device bat not seed to conectings.
firmware working 2% and ...error 294-invalid vender id
USPL charging 100% bat...error 270
johanis1982 said:
my htc arte 100 is not enter a boot menu.tricolors screen and IPL1.13.0001,SPL1.1.13.0000
activesync is reconizet this device bat not seed to conectings.
firmware working 2% and ...error 294-invalid vender id
USPL charging 100% bat...error 270
Click to expand...
Click to collapse
What ROM did you try to flash?
Bye,
Silvio
Ok, so I turn it on and it freezes on the wm screen, I cant sync it to my pc anymore...my version is wm 6.1. Any suggestions?
Please I need it to work..
cafterg said:
Ok, so I turn it on and it freezes on the wm screen, I cant sync it to my pc anymore...my version is wm 6.1. Any suggestions?
Please I need it to work..
Click to expand...
Click to collapse
Take your battery out and leave the phone for a while and try and boot again, if no sucess you will want to flash to your Official ROM The way you will do this is by turning off your phone hold in the camera key and plug in the usb, you will see a tri colour screen called the bootloader, now on the computer you will want to run the Official ROM just as you did to flash to WM6.1, some of the Official ROMS are just .nbh files there is a link @ the bottom of the Official ROMs for the other files needed, then when you have WM6 on there you can flash to WM6.1 again.
Hope this helps.
Nevermind
Fixed it hard reset solved the problem.
cafterg said:
Fixed it hard reset solved the problem.
Click to expand...
Click to collapse
Glad you got it sorted just persumed you had tryed that sorry.
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
dehzincwb said:
Hey help me please!!
Please brother's help me!!
I have a Diamond, and yesterday I try to upload my phone with a rom
At the moment it's load perfectly, so after the program has finished the atualization, my phone make a soft reset(normal), So when wake up, and show's me a boot screen with (TOUCHdiamond) name on the screen, he freeze!!
I can't do nothing! It's stuck!? omg! people help me to resolve this!? I try up a new rom but isn't work cause the phone don't connect with windows to change or execute other program, cause the phone are stuck on boot screen!
Please!!! HELP ME TO RESOLVE!!! PLEASE!!!!!
c ya!
thx for all
Click to expand...
Click to collapse
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
henk2484 said:
Here's what you need to do:
Hold down the "Volume Down" button and press reset with the stylus. You will enter the Boot Loader. Now plug in your USB cable connecting it to you PC. On the bottom part of the screen (phone) you'll see USB. Now your PC recognizes the phone.
Start a ROM update through the RUU executable and flash your phone with a different ROM.
Click to expand...
Click to collapse
thx!! really appreceate!!! thx! it's back to work! thx!!!!!
i have the same problem where my phone freezes at the boot screen, where it says touch diamond and thw orange writing in the corner. It was working fine, happened all of a sudden after i soft reset it, when the phone initally froze on an incoming call
Any suggestions?
just Change your ROM..,
hard reset is somthing i dont want to do. Is there any other option?
kerm said:
hard reset is somthing i dont want to do. Is there any other option?
Click to expand...
Click to collapse
I think not. Don't know if you have a lot of apps installed after flashing. What you could do is find a ROM that's UC2/sUC compliant. If you create a folder structure on your internal storage like this:
ROOT > Backup and Restore > CAB > CABi
Put all the cabs you want on your device in the CAB folder and all the cabs you want on internal storage in CABi folder. After flashin and initial customization you will find yourself in User Customization (UC). It will state that it found a CAB folder, choose to install. After this it will state that it found a CABi folder, install as well. This reduces the effort of installing all apps after a hard-reset. As for messages, contacts e.g. I suggest you use PPCPimBackup.
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Go1den3ye said:
same problem, but when I launch the ruu all is ok, until it starts, it stay at 0%, then I get a message that there was a communication error
Click to expand...
Click to collapse
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
henk2484 said:
Try flashing through bootloader. Press reset with stylus while holding volume down. After you're in the bootloader plugin USB cable and start flashing.
Click to expand...
Click to collapse
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Go1den3ye said:
tried and didnt work. made it worst in fact :S
startet update trough bootloader, started, updated to 13% and then I was told the update didnt work with my device (or something similar, in norwegian). tried an older update, same problem... :/
when I now boot the phone I'm directly in bootloader, and with the funny message
DIAM100 65M
SPL-2.03.0000
PSOC-Diam STAGE_PVT v0x30
Upgrade ROM code error
Please try again
I might have my hand on a brick... but hope not...
edit:
ooh, news, suddenly its updating moore... after 5 tries it allways stopped at 13%, but now it up to 31% and going strong... will update..
edit2: going strong up to 33%....... wow... well its a start and Im going to try some more.
edit3; 7th time the charm it seems... 100% and all I had to do was sit REALLY still. and I actually downgraded from 2.03 to 1.93 or something... should note that on this point I have tried flashing it with the original 2.03 and 1.93 every other time...
edit4; aaaaand we're back at the TOUCH Diamond screen.
edit5; aaaand after a failed flash to wm 6.5 (stopped/didnt start at 0%)... the phone started... This MIGHT be a clue that I should NOT try to get wm6.5 to run... but that wont stop me
I dont know if anyone else will have the same problems, but atleast this was my way to the resolution
Click to expand...
Click to collapse
Before you try to flash anything other then a stock ROM, I suggest you take a look at this thread: http://forum.xda-developers.com/showthread.php?t=416211
You need to have Hard-SPL flashed before flashing any custom ROM. My advice would be to use this one: http://forum.xda-developers.com/attachment.php?attachmentid=93362&d=1213719705
cool, will try that one. thnx
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
dalco said:
On My New Diamond having 1.37 Asian HTC ROM i Flashed 1.93 Asian HTC ROM. It flashed successfully then after installing some programs i have done the soft reset after that It hangs on Operator (Airtel) Logo and my phone doesn't start. I have not installed
any Hard SPL.
I have done Vol.Down + Softreset button but nothing appears on screen.
I tried to Hard Reset but nothing Happens
plz plz help me
Click to expand...
Click to collapse
Did you hold the volume down button while pressing reset? After pressing reset you should keep holding the volume down button until the tri-color bootscreen appears.
Hi all,
I have a huge problem and I hope you guys can help me. I tried to flash the orbit (german) artemis of my brother. First flashed the uspl and everything worked fine. At the end there came this penguin picture and the screen stayed black/blue. Then I flashed the rom (MossisROMV3.0GER Windows Mobile 6.5).
HOWEVER: Right then the battery of the laptop went down and the pc switched off. Unfortunately we couldnt plug it in, since we didnt have the cable with us. Now after pluging in the pc there were some connection error notices. Since I didnt know how to proceed I removed the battery of the artemis. I thought I should repeat everything from the beginning on. However the phone always got stuck at the blue o2 screen showing the data:
IPL 3.04.0001
SPL 3.04.0000
GSM 02.88.90
OS 3.13.0.0
Softreset and harrest doesnt make any difference. The phone always gets stuck here.
Is the phone bricked?? Why then does it start? Please help me out asap, since the phone is needed. What can I do?
Thanks in advance
brm
first you are NOT CID unlocked (SPL 3.04.0000)
so you can only flash german orbit ROM on the phone to revive it
1. get to bootloader (press and hold the record button and reset the phone using stylus)
you will get the tri colour screen
2. connect the phone via USB to PC (no need to look for activesync/WMDC connection in this case)
3. and run the RUU (official O2 german ROM for O2 Xda Orbit)
BTW i have official o2 UK ROM in my 4shared account
look for the link in my signature
you may try your luck on that
Hi,
thanks for the fast respond. I read the just before some where else and right now I am searching for the original german rom. However cant find it anywere.
Do you think the english one will work too?
best,
brm
sheennick123456 said:
BTW i have official o2 UK ROM in my 4shared account
look for the link in my signature
you may try your luck on that
Click to expand...
Click to collapse
very few chances of that ....
but you can have a go atleast
i might be having an german official ROM not sure though
if i have it i will upload it ASAP
Hi,
thanks sheennick123456. Really kind for your fast responses, Finally I found the original german rom and right now i am flashing it. Afterwards i am gonna flash a new rom and hopefully everything will wirk fine. But thanks again for your kind help.
best,
brm
LOL even i got 1
uploading it now as i type....
it might help someone .....
which rom
Hi again,
after installing a wm 6.5 ger rom i must say i dont like it at all. can you recommend me another one? i think one with htc touchflo would be great, but which one is it?
If i want to flash a new rom, do i first have to flash the original rom before proceeding?
best,
brm