qtek 9090 show only red indicator - MDA III, XDA III, PDA2k, 9090 General

Hallo guys,
I have my qtek 9090 leave at long time periode charge and forgot to remove it from charging cardle. Now it shows only the red indicator (upper right) and won't turn on , i try to hard reset but nothing happend. Does any body knwons what happend to my qtek 9090? (hope only the battery problem). Pls help !!!
Thx
domeX2N

domeX2N said:
Hallo guys,
I have my qtek 9090 leave at long time periode charge and forgot to remove it from charging cardle. Now it shows only the red indicator (upper right) and won't turn on , i try to hard reset but nothing happend. Does any body knwons what happend to my qtek 9090? (hope only the battery problem). Pls help !!!
Thx
domeX2N
Click to expand...
Click to collapse
Generally, a red light is some kind of hardware failure. However, it could be a failure of the charging circuit.
Try a different battery and see what happens.

Battery controller or motherboard down... you will go to service

i think your batrry is die!

Before you do that. Try using another charger.
Red indicator means that it's not charging.
Batteries dont die that fast, FYI.

How do you fix the circuit failure ,ive got the same prob but mine keeps restarting when i put in the cradle ...?

qtek 9090 show only red indicator when charging
So guys, any solution how to fix the problem with constantly restarting device in the cradle??? And suggestion how to power it on whithout the power supply??? BTW Tried with different AKB, no success!!!

Plug it in usb cable without battery first, and put battery in.
The battery needs to have some charge on it. Try cradle to charge it a bit before.

Related

PLEASEEEEEEE HELP T-MOBILE MDA III (QTEK 9090)

Hi Guys,
I put my T-Mobile MDA III (same as qtek 9090) on a cradle and after 10 minutes the screen turned off and the red light appeared on a top right corner. Now the device couldn't be turned on again. It looks like a completely dead device. Could you please help me what to do?
Is that a software failure or some other problem?
Please please please give me a hint. Is there any schematics that will help me in repairing the device? What is a cause for that failure?
Thanks in advance,
...MpegTv....
try to hard reset by pressing power and soft reset button
I've tried with hard reset and also with placing the device into bootloader menu with camera+record+power+reset and still nothing happened.
It is completely dead !!!
we have had this problem a few times with our blue angels at work, bad connection with the cradle seems to suck your batterie dead, we swapped batteries and pda works again everytime, This is the problem we get monthly that leads to dead looking pda's, exept that a batterie swap allways works,
ps
the batterie we swap with works too its just been drained.
Hi guys,
I discovered the cause. Something's wrong with my battery. After few minutes on a cradle the device turned ON and then reported BackUp battery VERY LOW, please recharge or replace.
What is a backup battery? Is that a main battery foor some other battery inside of device? How can I replace that backup battery.
When the device is on a cradle the backup battery is on 25% and the main battery is 0%.
What do i have to do beside charging?
Regards,
......MpegTv.....

what does mean a very fast flashing red led

hey guys i just bought a new battery for my jasjar, the phone isnt booting even if the charger is plugged in, it only boot for like 6 seconds before it turn off again, even if i charged the new battery for 10 hours, even there is no orange led tell that the battery is charging... i plugged the phone into the USB cable with the pc and a fast flashing red light comes from the led (like 3 flashes per second) so what is the problem? is the new battery damaged or what? please help
djgaby said:
hey guys i just bought a new battery for my jasjar, the phone isnt booting even if the charger is plugged in, it only boot for like 6 seconds before it turn off again, even if i charged the new battery for 10 hours, even there is no orange led tell that the battery is charging... i plugged the phone into the USB cable with the pc and a fast flashing red light comes from the led (like 3 flashes per second) so what is the problem? is the new battery damaged or what? please help
Click to expand...
Click to collapse
In all probability you have received a deffective battery. Please obtain a replacement or refund.
djgaby said:
hey guys i just bought a new battery for my jasjar, the phone isnt booting even if the charger is plugged in, it only boot for like 6 seconds before it turn off again, even if i charged the new battery for 10 hours, even there is no orange led tell that the battery is charging... i plugged the phone into the USB cable with the pc and a fast flashing red light comes from the led (like 3 flashes per second) so what is the problem? is the new battery damaged or what? please help
Click to expand...
Click to collapse
red light means extremely low batt.....guess your battery is faulty
i got the same thing.
and no it's not the battery.
it's the charging circuit on the main hardware isn't working.
open your phone and check the five small wires that they connect the mini usb to the main mother board, one of them must be cut.
Ninlour said:
i got the same thing.
and no it's not the battery.
it's the charging circuit on the main hardware isn't working.
open your phone and check the five small wires that they connect the mini usb to the main mother board, one of them must be cut.
Click to expand...
Click to collapse
so, is there a solution to this? or there really is nothing more for the device but the trash bin or for spare parts?
Have you tried this?
http://wiki.xda-developers.com/index.php?pagename=UniversalBatteryIssue
If you already replaced the battery and nothing, and you want to get rid of dear Uni place it for sell in parts on marketplace, a lot of people will go for it!
djgaby said:
hey guys i just bought a new battery for my jasjar, the phone isnt booting even if the charger is plugged in, it only boot for like 6 seconds before it turn off again, even if i charged the new battery for 10 hours, even there is no orange led tell that the battery is charging... i plugged the phone into the USB cable with the pc and a fast flashing red light comes from the led (like 3 flashes per second) so what is the problem? is the new battery damaged or what? please help
Click to expand...
Click to collapse
I had exactly the same thing with my old battery,after my try to discharge it with a lil electro-motor. then i found a post of a guy with the same thing,who fixed it-by "zapping" the UNI battery with a 9V battery,connecting + to + and - to -,for a few second. I tried it without thinking twice. It worked for me. Dunno how and why,but it did. I use the battery again,normal. But beware,it is dangerous to play with this type of battery,it can explode. Do a search on this subject and you will see
I agree with keeping_sg
how long have you left your uni on the charger?
just plug it in and leave it on the charger all night and see what happens.
I bought yesterday a 4800mAh battery from Hong Kong... 10 euros included shipping + FREE black back cover
Good battery life but still prefer to carry 2 original sized batts rather than get that big one, making even bigger our Uni
Respectfully,
Yes, that absolutely means your battery is dead. Try charging for a few more hours and then turn on your PocketPC. If the error persists, try changing the battery.
Regards,
Carty..
Yes, that absolutely means your battery is dead. Try charging for a few more hours and then turn on your PocketPC. If the error persists, try changing the battery.
Regards,
Carty..

help! reset, it hang, i reset again and its dead

hi,
yestarday i charge my ba until the charging led turn green, i reset, then when it comes to the 3 color lines with the radio version etc at the lower right, it hang. it just display that screen for 5 minutes. then i pull off the battery to reset it. (because i lost my stylus). i put the battery again. now it wont start.
when i put the phone in the cradle, the charging led will not light aymore.
btw, my ba is using wm5.
anyone know what i should do now?
thanks
just to add, when i put it in cradle and connect to pc, nothing happens at pc, but steady red light appear at ba.
anybody have any idea?
thanks
Battery is charged? (take it out and charge using cradle)
Is there "Serial/USB" on the screen (it's not enlighted, you need external light to see it).
If battery is charged and screen is empty not reacting for power and/or reset, you device might be totally dead.
PS: Styluses are not expensive.
jakubd.. yes battery is fully charged. i charge it separately from the ba. there is no usb/serial on the screen.
just when i thought to upgrade to wm6. damn. is there really no way of getting it back alive? hard to accept the fact that its dead.
ps: i have extra stylus, but the stylus hole is already loose. thats why i didnt use stylus anymore.
There is a chip in battery and sometimes it gets crazzy..
You must take off the battery from PDA, then charge battery in cradle...
after 1 hour you will put it on PDA and charge with pda...
It s solved...
shantilas.. i have done it. still nothing happened.

BA turning off if removed from cradle and not turning on again

Hello guys,
I have a problem, i haven't used my VPAIII for 6 months, and some days ago i wanted to turn it on, and it didn't react, so i decided that battery is low, i connected my device to cradle, and wait for some hours. So the problem is then device in cradle it's ok i can switch it on and it works perfectly, but if i remove it from cradle it turns off imediately and i can't turn on it again without connecting to cradle chargement, also it doesnt react to usb connection as chargment. Battery is totaly new it was bought from ebay (expanded 3400 mAH). Interesting thing that if i connect to cradle, device turns on automaticall and 1 time blinks led in red and goes booting system with no led light, after i see Windows screen it starting show the same right led in orange always, i see charging battery meter in windows but battery didnt go more then 50%, and everytime i boot on i receive Backup battery Very Low notification no matter how much i was charging my battery.
So i'm afraid maybe it's internal backup battery failure, or my main battery didn't get chargement then it says that charging. Maybe someone of You guys have any usefull advices, what can be the problem? Also if it possible maybe somebody can give me alink or image to see there this backup battery soldered on scheme.
Thanks ppl!!!
Raz
razorrazor said:
I have a problem, i haven't used my VPAIII for 6 months, and some days ago i wanted to turn it on, and it didn't react, so i decided that battery is low, i connected my device to cradle, and wait for some hours. So the problem is then device in cradle it's ok i can switch it on and it works perfectly, but if i remove it from cradle it turns off imediately and i can't turn on it again without connecting to cradle chargement, also it doesnt react to usb connection as chargment. Battery is totaly new it was bought from ebay (expanded 3400 mAH). Interesting thing that if i connect to cradle, device turns on automaticall and 1 time blinks led in red and goes booting system with no led light, after i see Windows screen it starting show the same right led in orange always, i see charging battery meter in windows but battery didnt go more then 50%, and everytime i boot on i receive Backup battery Very Low notification no matter how much i was charging my battery.
Click to expand...
Click to collapse
It sounds like the main battery is bad.
Is the battery you picked up new, or new as of 6 months ago? If it's new-new, it is still possible that it is bad.
Also, the charging circuit may have died. Most electronics will work and work, and when they do die, it's usually when power is applied to them (turned on, charged, etc).
The fact that it does charge up to 50% makes me think the main battery is bad. Do you still have the original battery? Try it and see what that does.
razorrazor said:
So i'm afraid maybe it's internal backup battery failure, or my main battery didn't get chargement then it says that charging. Maybe someone of You guys have any usefull advices, what can be the problem? Also if it possible maybe somebody can give me alink or image to see there this backup battery soldered on scheme.
Click to expand...
Click to collapse
The internal battery is used only when the main battery is discharged or missing.
As for a link, hit the wiki.
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
Under the "Hacks & Tweaks" section, go into "Technical Stuff".
Thanks for reply, new battery i bought maybe 4-6 months ago i used it maybe 1 week, after that i turned off my device and left it for 4-6 months, so nothing should be happened to battery. I'll check device with old one, but it seems that device didn't work with original old one battery too.
Any other solutions, advices?
Thank You very much guys for help!!!!
RAZ

s4 mini wont charge

Hello, for the first: sorry for my bad english. I hope everyone can understand my post. After a few weeks my s4 mini wont charge after it was going totaly out of energy or going flat. If I connect the charger it dont vibrite and the green charge idicator battery is not shown.
If I turn on the phone it boots and if I press the power button not so long a grey battery icon is on the screen and goes away after a short time. If I connect it with the PC the battery indicator in the status bar shows the animation after a short wile but longer as normal and it wont charge. In the battery status menu is written that is no charging.
By the way the battery charge in a static charger I have bought. So the battery is not defect.
I tryed hard reset, change battery, tryed severals cabel to charge.
Please can anyone help me
Thx

Categories

Resources