Develop Bugs

WIFI HELP NEEDED

hi
i have a belkin g wireless 802.x.G router at home and have a wifi setup since long..
i was always able to connect to the wireless network with Bluangel aswell as my laptops.. (i have no encyrption.. or secutrity settings)
i upgraded the radio rom to 1.12 and after that have not been able to connect to the network.. it says belkinG network found and connected but the internet explorer or msn or agile messenger cant seem to find the net settings..
internet is on share in main computer nad my lap tops still conect and use it..
i thought may be it was because of rom 1.12 but flashed older 1.31 imate with ext rom and radio rom but still cant get the internet to work..
when i use PIE it says network card not found..check settings..
in wireless settings i can see it saying that it is connected to belkin network
can anyone help me
thanks

zohaer21 said:
in wireless settings i can see it saying that it is connected to belkin network
can anyone help me
thanks
Click to expand...
Click to collapse
can you see if your pda2k's wlan adapter has an IP address? if not, then only radio is connected but that doesn't mean you have a working network connection.
I use vxUtil which is a collection of network tools, this enables me to ping, check settings, ip addresses and a whole lot of other stuff since the onboard utils just don't cut it for network use..

argh
I have the same problem although I havent upgraded any radio settings! My Wifi has worked fine since ive had my m2000, being able to stream video and music or surf the web. but recently i cant surf the web although I can still stream music.
Ive downloaded the program you reccomended, but not to sure what to do with it. Any help would be ideal
Thanks

hi
thanks guys.. i dont know what happened but everything is eorking now ..including the net.. just turned wifi on.. it asked me again whether this is for work or internet (evn htough i had it connected to internet last time aswell)
thanks

PLEASE HELP WITH NETWORK ADAPTERS for Blue Angel

I was attempting to discover what the problem is as far as adding my Blue Angel WM2005 to my home network. I would like to be able to share files between my Pocket PC and other computers in my home in the normal way. Anyways....... I changed a setting within the Settings/Conections/Network Cards, folder. Problem is that I cant remember which adapter it was that I changed. Although my WIFI internet link still seems to work OK. I am totaly unable to connect with my desktop now and obviousley Active Sync wont work at all. Everytime I plug my Pocket PC into its stand. The computer displays a caution symbol in the conections list and says that there is a problem it. I also noticed that the IP adress on the desktop icon for the Pocket PC does not match the one on my Pocket PC.
If anyone knows the correct settings so that the IP adress will yet again be automaticaly detected and a link will establish. So that Active sync will work correctly, could they Please Please post a full and complete list of the settings for both the Desktop PC and my Pocket PC.
Thankyou

following on
Ok well, I still cant get active sync working at all. But my Conections folder on the desktop does at least show a good conection with the pocket PC. As for the WLAN conection to the wierless router, it seems to be a somewhat tempremental and connects ok sometimes and then refuses totaly other times. Also previousley the thing would automaticaly connect to the internet via the WLAN as soon as I enterd a web adress in Pocket Internet Explorer. Now I have to manualy connect the WLAN everytime, even so it only works about 40% of the time.
All this I would like to point out is as a result of me doing somthing in the conections folder on my Pocket PC. Because it all worked perfectly before hand. So I am 100% sure that all is needed is for the settings to be set correctly and it will all work great again.

folow on
I seem to have fixed pretty much all the problems on my WM2005 equiped SPVM200. However It was necesary to Hard boot again and reinstall everything. But the good thing is that now not only do all my netwok adapters work correctly, but the Ring Tones are at a good volume also. The one and only problem I have left is that I still cant get my back light sliders to work and full power on the backlight realy eats the battery. So if anyone has any solutions to that problem, please post them here.

Rob, I am thinking about upgrading my SPV M2000 to the windows pocket 2005 op system. Does this improve the bluetooth system. I currently have problems connecting my SPV to an integrated Bluetooth car kit and wondered i this upgrade would help. I think that I need Bluetooth vers 2.0 and also a sim access profile. Is thids included oin the 2005 op system? You may have guessed that I am new to this!!
Cheers

problems wih wifi?

hi since upgrading my tmobile vario11 hermes 300 to wm6 shacp 3.30 i radio version 1.46 i cant get my wifi connection to work , it will connect to the conection ok , and in connection manager , it will show connected to wifi network , but every time i try and go on internet with phone , it will say there is no internet or data connection avalible? even if it is connected to my wireless connection , any ideas guys ? it is really annoying!

ripplingsnake said:
hi since upgrading my tmobile vario11 hermes 300 to wm6 shacp 3.30 i radio version 1.46 i cant get my wifi connection to work , it will connect to the conection ok , and in connection manager , it will show connected to wifi network , but every time i try and go on internet with phone , it will say there is no internet or data connection avalible? even if it is connected to my wireless connection , any ideas guys ? it is really annoying!
Click to expand...
Click to collapse
I suppose youve tried soft-reset and all that..
does it connect to the internet if you have it connected via usb to the computer?

i havent tried the comp connection no , and yes tried soft reset etc , but if it says it is connected to wifi on phone why is it not using it? i am in UK Btw

ripplingsnake said:
i havent tried the comp connection no , and yes tried soft reset etc , but if it says it is connected to wifi on phone why is it not using it? i am in UK Btw
Click to expand...
Click to collapse
Normally if it is connected to WiFi and if you know the WiFi has a good connection to the internet (i.e. no security, timing, aso.), it should connect. If WiFi does not work, it should try the Wireless connection. If u say that is also setup but still doesnot connect, try to connect it to the computer via USB and see if thats working.
I have used schaps 3.30c until a couple of hours ago and it was working with no issues over wifi and wireless... try hard reset then...
sorry i cant help more...

hey...I have the same problem with my X01HT... I can access to the WiFi in the office and even remote control my PC, but I still cannot visit Internet on the device...pls advise

anyone could kind lent me a hand ?

Does this help?
http://forum.xda-developers.com/showthread.php?t=318748&highlight=proxy

htc wifi router installed, now internet not working

I got the htc wifi router working and surfed for a few minutes. I logged out of my PC and back in and the internet wouldnt work on my PC or my phone. I rebooted my phone and still the same problem. Has anyone else run across this problem? How do I fix it/troubleshoot it? 3G is showing it is connected

Has anyone else had this problem? I had to finally do a hard reset/wipe to get things working again.

There's another similar report here, maybe in the cdma area.
I'm not clear on your issue. Is this wmwifi not working after a reboot or Activesync not recognizing after the reboot?
And are you using the latest wmwifi?
edit: I'm adding that I downloaded the latest wmwifirouter last friday 18sep09, and I thought it was a vpn/wifi issue on my laptop. My TP2 did not recognize under activesync after I did a few things, but WM did work the one time I tested it.

I am not using wmwifi. I am using HTC CM Internet Sharing:
http://forum.xda-developers.com/showthread.php?p=4170499#post4170499
I figured it was put out by HTC (and free) so it should work right?
It created the wifi access point fine, and I was able to surf with my laptop at good speeds. I left and came back and the internet would no longer connect (laptop or phone).
I tried everything from soft rebooting, to removing the application, to calling *228 (reset the phone), and even manually setting up the verizon data settings. Nothing worked. I just could not establish a data connection.
Finally I gave up and did a hard reboot and restore and it finally worked.
I really need a reliable way of setting up a wifi access point but dont want to risk this fiasco again.

Yeah, I mis-read your first post, sorry!

For me it was as simple as starting the wifi router program and then cleanly stopping it. If forced to quit, you will have no network access. It's happened a couple times for me.

jbass350z said:
I got the htc wifi router working and surfed for a few minutes. I logged out of my PC and back in and the internet wouldnt work on my PC or my phone. I rebooted my phone and still the same problem. Has anyone else run across this problem? How do I fix it/troubleshoot it? 3G is showing it is connected
Click to expand...
Click to collapse
Hi there, I had used htc wifi router a while back and hadnt tried connecting the phone to the local wifi network since. After reading your post, I thought I'd check and yes I was getting the same problem, i.e. it wouldn't connect to my home wifi network.
I found the fix to be as follows:
1) Go into comms manager, turn WiFi on
2) Under settings go to wireless LAN
3) In the main tab you will that the SSID is set to "Mobile router", select change network button underneath.
4) Now you should see the SSID of your network, dont select anything, just press o.k at the top and hey presto it will connect.
Let us know if this worked.

billu said:
Hi there, I had used htc wifi router a while back and hadnt tried connecting the phone to the local wifi network since. After reading your post, I thought I'd check and yes I was getting the same problem, i.e. it wouldn't connect to my home wifi network.
I found the fix to be as follows:
1) Go into comms manager, turn WiFi on
2) Under settings go to wireless LAN
3) In the main tab you will that the SSID is set to "Mobile router", select change network button underneath.
4) Now you should see the SSID of your network, dont select anything, just press o.k at the top and hey presto it will connect.
Let us know if this worked.
Click to expand...
Click to collapse
Thanks. I couldnt connect to the internet through 3G either though, even though the 3G icon was showing in my status bar.

jbass350z said:
Thanks. I couldnt connect to the internet through 3G either though, even though the 3G icon was showing in my status bar.
Click to expand...
Click to collapse
Ah, that's probably for some other reason, no issues with 3G connection for me.

Same problem for me. I connect to the mobile through wifi (Adhoc connection) and the mobile is connected in 3G but I can't surf internet from my laptop.

Enable DHCP
Hi all
Sometimes after using this software you need to renable DHCP in the connections settings. This can be done via:
Start>Settings>Connections>WiFi>Wireless Networks>Network Adaptors>NE2000 Compatible Ethernet Adaptor and then select Use server-assigned IP address.
Cheers
andrew-in-woking

hi i installed e htc wifirouter but it is using my mms setting instead of my phone internet setting. any1 can help?

[Q] Defy loses internet connectivity via WIFI hotspot.

Hi All,
I am trying to share my laptops internet connection with my Defy via a virtual miniport adapter(using a program called connectify)...my phone gets connected perfectly and I am able to surf the net on my phone..but only for a short time. After a while if I just let the phone be on standby for a while, it loses the internet connectivity. It remains connected to the hotspot(on my pc) but somehow there is no internet on the phone anymore. However if I turn off the wifi on my Defy and put it back again, the internet is back. I have tried almost everything but nothing seems to work. Initially i thought the problem might be with the connectify software on my system so tried using other softwares such as virtual router intel mywifi technology etc. I even tried to create a virtual wifi miniport manually from the command line but same problem everytime. I tried to change the wifi sleeo policy in my phone to never and that did not help too. I am running stock Froyo on my Defy. Sometimes when I turn off wifi and turn it back on it wont even connect to the access point, keeps showing scanning...connecting...scanning...connecting...then finally disconnected. I just cant understand what is wrong. If someone can throw some light on this...it would be really helpful, its almost 20 days since I am breaking my head over this.
Thanks

this might help
Install connectify and select wifi security mode as Ad-Hoc,WEP,this worked for me the defy sometimes seems to have a problem with WPA2.