Hi All
I Have Bt Headset Plantronics Voygar 510 Work Very Well With My Tytn2 But When I Bress The Hedset Action Button I Didnt Get The Voice Dial Even Its Work If I Use It By Pressing The Phone Assigned Button .
Anyone Haveig Idea To Help Me ???
Thanks
I have the same phone and headset. Try pressing and holding the Action button until you hear 2 tones. You'll hear a beep first then another tone. Release the button after the second tone.
thaaaaaaaaaaaaaaaaaaaaaaaank you
thats it indeed
Related
This problem I am having seemed to start with WM5 AKU 2.3 and is still happening to me in WM6. If someone calls me, and I push the button on my bluetooth headset to answer, my ringtone plays for about a half a second to the person calling me. They usually complain about a loud noise when I answer the phone. I have discovered if I push the answer soft key on my phone instead, it doesn't play the ringtone, but it takes a little longer for my headset to pick up. This happened with my old headset (Plantronics Discovery 640) and my current headset (Jawbone). Has anyone else experienced this problem? If there was some way to adjust the delay for when the headset picks up, I think it would fix this problem because when pressing the key on the phone to answer there is a delay, but when pressing the button on the headset, there isn't.
Thanks...Brian
Hi
How i can enable the handsfree on and conference functions during a call?
Since I upgraded wm5 to wm6, I can´t use both functions. During a call I touch the menu button but this functions aren´t enabled.
Thanks.
motok1 said:
Hi
How i can enable the handsfree on and conference functions during a call?
Since I upgraded wm5 to wm6, I can´t use both functions. During a call I touch the menu button but this functions aren´t enabled.
Thanks.
Click to expand...
Click to collapse
for your handsfree... do you have a bluetooth headset or other bluetooth speaker phone/mic device paired with your dash and turned on and connected when you are trying to enable hands free?
if not , handsfree will not be available.........speakerphone however should be an option
as far as conference functioni think you have to have 2 calls on the line and then you have to use the join calls option to conference i believe (maybe its still conference?)
Ok, I´ll try, but the handsfree only works with wireless or bluetooth earbuds?
No options for mini usb wired headphones?
Any sugestion for the conference problem?
Thanks
motok1 said:
Ok, I´ll try, but the handsfree only works with wireless or bluetooth earbuds?
No options for mini usb wired headphones?
Any sugestion for the conference problem?
Thanks
Click to expand...
Click to collapse
when using wired earbuds, it should automatically direct the calls to the headphones....assuming you're using the earbuds provided by HTC and read my edited comment above regarding conference issue
So for conference do this...... Call someone, once connected... press right soft key and select hold.... then dial another number and press green talk button to dial.... then after that call is connected....you can then press the right soft key again and you can select conference... which will join the two calls . ......whalah!
pudgedaddy said:
So for conference do this...... Call someone, once connected... press right soft key and select hold.... then dial another number and press green talk button to dial.... then after that call is connected....you can then press the right soft key again and you can select conference... which will join the two calls . ......whalah!
Click to expand...
Click to collapse
Thanks for the answers, but the problems still exits. The problem was after the upgrade to wm6, because my phone was original from T-mobile wm5.
So, the options are there but not highlighted in the menu (I can´t choose it)... or not enabled. Maybe a change in the registry?
Thanks
pudgedaddy said:
So for conference do this...... Call someone, once connected... press right soft key and select hold.... then dial another number and press green talk button to dial.... then after that call is connected....you can then press the right soft key again and you can select conference... which will join the two calls . ......whalah!
Click to expand...
Click to collapse
Thanks for the answers.
The real problem is my version of WM6, it´s not enabled both functions with wired headphones. With the old wm5 from t-mobile, i did´nt had this problem.
My version has WWE, EUK and Spanish lenguages, it´s a little diferent,
Thanks, again.
Hi there,
It´s my first post on this forum. I have a P3300 and thanks to this forum i got so many stuff for it.
Yesterday I bought a Motorola H700 BT Headset. I´ve paired the the headset and made some calls, but i dunno how to setup the headset buttons. When i tap the headset call button it calls the dialer and if i hold it dials the last number.
Can i remap the buttons to call the cyberon voice speed dial?
Thanks
Hi I use a Jabra SP5050 hands free with my TP2
Recently whenever I answer a call thru the Jabra, instead of answering the call, the Jabra starts playing the phones ringtone instead. To now answer the call, I have to answer it via the phone and then speak via the Jabra.
Tried re setting, pairing contacting Jabra but to no avail. Any help will be greatly appreciated.
I have same problem with Nokia BH-602 or another PNX-BTH-630I.
Outgoing calls are ok - I press button at phone and I call through HF.
Call same number again is ok - I press two times button on HF and TP2 dial last dialed number and I call through HF.
Incomming calls are not ok - Phone is ringing, I have to press button on HF, now TP2 transfers ring melody to HF and then I need to press a button on phone to reciveve call.
I trided pairing HF again, disable to play audio on HF, reset HF...
Its something at phone....anybody have solution?
Thanks.
sirnoname said:
I have same problem with Nokia BH-602 or another PNX-BTH-630I.
Outgoing calls are ok - I press button at phone and I call through HF.
Call same number again is ok - I press two times button on HF and TP2 dial last dialed number and I call through HF.
Incomming calls are not ok - Phone is ringing, I have to press button on HF, now TP2 transfers ring melody to HF and then I need to press a button on phone to reciveve call.
I trided pairing HF again, disable to play audio on HF, reset HF...
Its something at phone....anybody have solution?
Thanks.
Click to expand...
Click to collapse
SOLUTION: Try to use other ROM - i fixed it in my ROM - see kalhimeos thread
Hi all!
SEA Rhodium, 6.5 with VC 1.6 from links here...
Quick press Call starts phone, 2 quick presses starts phone, calls last,
Long Press Call button starts VC and it listens for me.
HTC wired headset (Stereo headset symbol shows in notification area), quick press nothing, 2 quick presses starts phone, calls last (then quick press ends call), long press does nothing.
I'm hoping and expecting that a long press on the headset switch will start VC and then VC will listen to the headset mic - just like the hand set, and like my old Startrek!
Have I missed anything? Why doesn't the headset switch completely act like the call button?
(bump?)
Hi all, still trying for help or confirmation...
My old Startrek would let me push headset button, beep to me, listen for command and on from there...
My TP2 will let me push long handset call button, beep to me, listen, do my bidding...
On wired headset, single push does nothing, long push nothing, double push does last call (just like handset!)... In call push gets me hold on/off, long push hangs up.
I don't understand why, if headset switch can replicate the call button,
why VC doesn't beep in and listen to me on single long push? It seemd so natural on my Startrek...
THX
Anyone else? Am I wrong, wrong headset, operator?
tshephard said:
(bump?)
Hi all, still trying for help or confirmation...
My old Startrek would let me push headset button, beep to me, listen for command and on from there...
My TP2 will let me push long handset call button, beep to me, listen, do my bidding...
On wired headset, single push does nothing, long push nothing, double push does last call (just like handset!)... In call push gets me hold on/off, long push hangs up.
I don't understand why, if headset switch can replicate the call button,
why VC doesn't beep in and listen to me on single long push? It seemd so natural on my Startrek...
THX
Anyone else? Am I wrong, wrong headset, operator?
Click to expand...
Click to collapse
It isn't based on the device you use. The headset needs to support that feature.