I have noticed in the past few weeks that my signal reception has gotten worse. Places where I usually get 3G and HSPDA, now I only get Edge. It's seldom I get 3G anymore anywhere.
I am currently using K's ROM v1.30b. I tried a bunch of different radios as well, but no affect.
I am wondering is there something that can cause the signal to drop like that? Is it ROM dependent?
BTW, I'm on at&t in the midwest.
No one knows what can cause this?
Unless you have handled your device badly then it sounds like a transmitter issue. What radio version are you using? Also go into: start>system>phone>band
tell us what settings are selected.
The reception and etc....is attributed to the radio stack version, nothing else.
mrvanx said:
Unless you have handled your device badly then it sounds like a transmitter issue. What radio version are you using? Also go into: start>system>phone>band
tell us what settings are selected.
The reception and etc....is attributed to the radio stack version, nothing else.
Click to expand...
Click to collapse
Thank you for your reply. I've used the following radios:
1.47, 1.48, 1.50, 1.54 all with approximately the same results. Meaning mostly Edge network everywhere and very very rarely 3G. Whereas it was 3G mostly before.
My settings are :
Select your network type: GSM (Should this be Auto?)
Select your GSM/UTMS band: Auto
Dont forget that sometimes the problem can be on AT&T's end...
The tower by my work has occasionally gone screwey for a day and all I can get is EDGE, or sometimes 3G with only 1 or 2 bars before switching to another tower on EDGE (normally full bars).
It's happened 4 times in the last year, each lasting only one day.
Go to a friends house or somewhere else and see if 3G comes back. If so then it might just be your local tower, esp. since you have tried so many radios without a difference.
EDIT: just read the above post..
Network type MUST be Auto or WCMDA for 3G to function!!
anubus12 said:
Thank you for your reply. I've used the following radios:
1.47, 1.48, 1.50, 1.54 all with approximately the same results. Meaning mostly Edge network everywhere and very very rarely 3G. Whereas it was 3G mostly before.
My settings are :
Select your network type: GSM (Should this be Auto?)
Select your GSM/UTMS band: Auto
Click to expand...
Click to collapse
Your troubles as shown in the post above this one....your mode is set to GSM....hence why your device will not work on UMTS/3G unless the mode is set to WCDMA or auto.
Related
My question is why My hermes Tytn picks up the weakest signal at this moment, that is the '3G' signal which is only 1 bar. If i switch to 'G' i get 4 bars instantly.
I have flashed the radio roms already went from 1.40.30 to 1.38.01...anyone thought about making my hermes just picking up the strongest signal automatically regardless if i want to use my UMTS connection?
bandswitch is not really an option right, bc i want my phone just picking op the strongest network at all times.
Its quite ridiculous that my phone picks up the weakest eg 1 bar '3G' instead of 4 bars of 'G' in my opinion especially when im in a phone conversation.
Any comments are welcome.
Regards,
Chiwah
btw new black touch rom is nice...only dunno if its a mon-tue-wedn etc on my today screen.
i have the same problem, although this thread should be moved to "hermes" or "hermes upgrade" forum instead of wm6 forum.
but if anyone has a solution to how to fix it that would be most welcomed by me aswell. (right now I always use gsm network)
Try to update radio to 1.41, it will solve your problem
I have same experience, it is solved after i updated the radio to 1.41. It is noticed that radio !.43 encountered same problems as 1.38 or 1.40. It always pick up the weaker signal such as 3G instead of steady GSM. For the radio 1.41 it always pick up the strongest signal, it will pick up GSM autuomatically if 3G signal is weak.
Or.....
Or you can just search for a great little program called band switch. this program creates a little icon at the bottom of your screen allowing you to switch band on the fly with the click of a button. it is free and was developed by someone in the community. just do a search for it.
I think you will find that the device when in auto (in common with all 3g devices) is set to choose 3g if its available - and thus it will choose 3g if it can get a signal. Personally I prefer 3g (even with one bar) to gsm as it means I can talk and receive emails at the same time.
But I am aware that some hermes users on some networks seem to have some 3g issues with low signal (ie it thinks there's a 3g signal but actually voice and data have trouble getting through).
I agree. The phone will deliberatly attempt to use a 3G signal whenever available. As long as you can send and receive calls, it seems to me that is a desired feature.
Now, if only they would expand 3G into more of my state...
Hi,
I'm running my desire with rooted stock rom by oclock (called 3'oclock over at modaco).
Also running a2sd with richardtrip ocv14 kernel, and radio is 32.30.00.28U_4.05.00.11.
A lot of incoming calls are not getting through - sometimes they do, sometimes they don't. People are saying it goes to voicemail 2 or 3 times before it come through. I don't see missed calls on my phone when this happens.
This is with mobile internet set to off, so it isn't that.
Anyone else have this issue? And know how to fix?
Thanks.
Is it possible you could try flashing a differnet radio perhaps?
Are you on he boundary of your network's 3G coverage?
I find I often have to set 3G devices to 2G only in my house because the 3G coverage is marginal and the phones spend half their life jumping between HSPA and EDGE, and it often causes missed calls as you describe. Nothing exclusive to the Desire though, the only 3G device that never had a problem here on O2 was my old TyTN, and that was only because the radio on that was too rubbish to pick up a 3G signal at all here
doinbox said:
Is it possible you could try flashing a differnet radio perhaps?
Click to expand...
Click to collapse
happens on 30, 36 & 37 radios for me.
Azurael said:
Are you on he boundary of your network's 3G coverage?
I find I often have to set 3G devices to 2G only in my house because the 3G coverage is marginal and the phones spend half their life jumping between HSPA and EDGE, and it often causes missed calls as you describe. Nothing exclusive to the Desire though, the only 3G device that never had a problem here on O2 was my old TyTN, and that was only because the radio on that was too rubbish to pick up a 3G signal at all here
Click to expand...
Click to collapse
It happens with my internet set to off though - haven't had mobile internet enabled all day just too see if it was this but it happens when the internet is off.
Your phone will still connect to 3G networks if the data is off. Try changing 'Network Mode' under 'Mobile Networks' to GSM only and see if that helps.
Azurael said:
Your phone will still connect to 3G networks if the data is off. Try changing 'Network Mode' under 'Mobile Networks' to GSM only and see if that helps.
Click to expand...
Click to collapse
Will give it a go - hope not though cos i like using 3g for emails, surfing etc.
Will also try disabling the "enable always on mobile data" setting to see if that is doing it.
Thanks for the info.
I had exactly the same problem when I used the built in widget to turn OFF mobile data (I had a stock orange ROM in UK). I did this to save battery, but calls did exactly what you said. I now leave it on all the time (and actually battery has improved massively in my 4th week, dunno why, but I went 2 days without charge, and quite reasonable usage!)
Now I leave mobile ON all the time it works no problems, and haven't had the same problems since!
Hi,
I have some data connection problems since the first day i bought my DHD.
The phone reception signal bar are always changing even when i am not moving at all.
It can generally move from H to 3G a few times, then go to E and then G, in a few seconds.
it always moves, my internet connection is very slow.
It's as if the radio was always trying to renegociate the method of communication (GPRS, 3G, etc) with the operator's antenna
When i am in a phone call, i got disconnected sometimes or the sound stop during a few seconds (the time the radio switch from 3G/H to E/G i guess)
When i disable WCDMA from the settings i get a quite stable sound during my phones calls (maybe because the phone no more tries to negociate). But for Internet... it's just slow.
I tried a few ROMs, and their respectives radio rom (the one with the IRL branded in the ROM) i sometimes thought it was better but always it's still too unuseable.
I tried my SIM card in an iphone 3GS and i am usually in Edge (sometimes 3G) but when its 3G i can surf quickly during hours (if i don't move). This is not the case with the DHD.
btw i am on the french carrier SFR
If any of u had any clues i would really appreciate your help.
Thanks you
what rom are you using and what radio and ril................... now what radio are you on now
OP already stated he tried numerous ROMS and their cooresponding radios. Sounds like the signal is that degraded that any radio/ril combination will not help.
Thanks for your replies.
As said i tried many ones with their respective recommanded radio.
I am actually trying Radio_12.62.60.27_26.13.04.19_M with Android Revolution HD 4G_6.1.1 with no sense script.
Are there tests i could do to identify if its a hardware problem (like standing in front of an antenna and running some special tool maybe)
Btw, i also tried :
-RCMix3D_Runny_v1.3 but does work with internet pass through (wich is really important since i can't use internet from my phone carrier...)
-niarkMIUI-3.9.1
-LeeDrOiD_HD_V4.0.0-SE-3.0-BETA with Radio_12.54.60.25_26.09.04.11_M2
-cm_ace_full-203 with my stock radio ROM
-virtuous_unity-v2.37.0 with i don't remember wich one...
P.S : i would be Glad to test any ROM / Radio combinaison you would suggest me.
Thanks by advance for your attention
if you tried all those roms and diffident radios seems like its more like a hardware or provider issue does it happen off different towers or maybe you can go to one of the stores and try the phone at the store with yours at the same time?
Thank for the advice indeed i need to try this.
Do you know what i need to revert back for the tech not to tell the waranty is over since i have flashed my phone ?
Does i need to reflash the recovery etc? is there some tutorial in this subject because if i go to the store with my custom rom i guess i won't get too much help :/
Don't even take out your phone, your going to say your just looking, don't show anyone your phone, they won't even know what to look for, just test your phone to the one at the store, make sure apn's match. But if you return your phone you'll need to ruu back to stock. You can search easy s-on
Sent from my Inspire 4G using XDA App
What happens if you manually select 3G only, or 2G only from the settings menu? Does it just lose signal, or stays strong?
Hi
If i select 3G only
I first get no reception (as if when switching from 2G to 3G the radio had to restart)
Then the 3G signal appear strong, decrease slowly in less than 30 seconds, and after all, it seems quite stable.
The bandwidth is good i am downloading fastly
(i am commenting in real time)
Still no deconnection.
I will try it during the whole day and tell how it is behaving.
umm during a few seconds, there were no indicator (no 3G or H), just 3 bars.
It then restarted in H with 1 bar (i am not moving at all)
What will happen if i have no 3G in my area ? I won't be able to receve a phone call ?
Thanks
elfrancesco said:
Hi
If i select 3G only
I first get no reception (as if when switching from 2G to 3G the radio had to restart)
Then the 3G signal appear strong, decrease slowly in less than 30 seconds, and after all, it seems quite stable.
The bandwidth is good i am downloading fastly
(i am commenting in real time)
Still no deconnection.
I will try it during the whole day and tell how it is behaving.
umm during a few seconds, there were no indicator (no 3G or H), just 3 bars.
It then restarted in H with 1 bar (i am not moving at all)
What will happen if i have no 3G in my area ? I won't be able to receve a phone call ?
Thanks
Click to expand...
Click to collapse
If you force it to 3G only, and you move out of 3G area, then you should either get a no signal indicator, or if you have roaming enabled, you would get the roaming indicator. I'm curious now because as you said you aren't moving, and it's still changing. That shouldn't happen. Hmmm
Ive recently attained a captivate glide and unlocked it to use on t mobile. Like you would assume at first glance i had an edge connection. Although after messing around with it i realized by going to
Wireless and network > Mobile networks > Network operators >Default setup > Manual it gives me the option to choose to connect to att/ tmobile and when i chose tmobile and it registers on the network i get H+ speeds for a few minutes then it just defaults back to edge
is there a way i can keep my phone on H+ at all times because its capable
bump!
agchopz said:
Ive recently attained a captivate glide and unlocked it to use on t mobile. Like you would assume at first glance i had an edge connection. Although after messing around with it i realized by going to
Wireless and network > Mobile networks > Network operators >Default setup > Manual it gives me the option to choose to connect to att/ tmobile and when i chose tmobile and it registers on the network i get H+ speeds for a few minutes then it just defaults back to edge
is there a way i can keep my phone on H+ at all times because its capable
Click to expand...
Click to collapse
I have this problem too, but only into my house. Outdoor that´s right. I´ve tested with all modems, and I think the best for me is i927UCLH2.
Which rom, kernel and baseband do you use??
I´ve done some tests with my glide and my mother´s galaxy chat, in different places. In the street I have H+ and she H, but when we are into any house, under any roof, she still has H, and I only have E.
Does it happen to you?
shmemse when
mario_isp said:
I´ve done some tests with my glide and my mother´s galaxy chat, in different places. In the street I have H+ and she H, but when we are into any house, under any roof, she still has H, and I only have E.
Does it happen to you?
Click to expand...
Click to collapse
Doesn't this just sound like a basic signal issue? When the signal gets worse (indoor vs. outdoor) it will drop down to a lower signal.
Also, are you sure Tmo has fully rolled out the 1900mhz band in your area? They may not have complete coverage yet.
epsalmond said:
Doesn't this just sound like a basic signal issue? When the signal gets worse (indoor vs. outdoor) it will drop down to a lower signal.
Also, are you sure Tmo has fully rolled out the 1900mhz band in your area? They may not have complete coverage yet.
Click to expand...
Click to collapse
i'm sure that it is a phone or a software phone problem, cause i've put my sim card in my last phone (xperia pro) and it has H signal too
i've tested all rogers and att modems, and still have the problem..
Hi, I have a similar prob, I'm in the uk and need it to stay on H+, as it'll drop off to 2g in the house, I've always used miui roms in the past and they have the option to force 3g etc. The only way round this I could find is to use 'pimp my rom' which allows you to select which network you want manually, such as gsm, edge, wcdma etc. Download it, go to tools, device hidden menu, turn off radio, wait, turn radio back on, then quickly select from the drop down box what signal you want, I select wcdma only. If the radio does not come back on, put on flight mode then off again, and will work.. bit annoying but works..
That happen to me too, but not for t mobile, for a operator that use 1900mhz in my country.
My N900T has much worse signal than my previous Note II - between 15 and 20 dBm worse, so essentially unusable out in the fringe area I live in.
I'm running SlimKat 9.0 (4.4.4) baseband is N900T UVUENK3 (which I think might be the most recent modem).
I'm using a StraightTalk ATT SIM (phone is unlocked) but that shouldn't matter for signal strength
I've got Preferred network type: LTE
And in service mode / phone info, I have preferred network type: LTE/GSM auto (PRL) - unchanged from standard.
I've removed the back cover (the one under the battery door) and made sure all the "fingers" make good contact with the contact pads that are built into that cover (fixed my GPS but not baseband)
Anything else I can check? Should I try some ATT radios to see if signal improves?
Or is this just the nature of the beast? Move to the city or get a different phone?
Thanks for any input!
Had this problem but hopefully the fix I used will work better. I flashed pac rom from nightly and resulted in no signal even though showed 3 bars(never higher or lower) but no connection in reality. Tried this and got signal kinda ( very slow and missed calls and sms)
Anyway
On tmobile network but might help either way idk never had att.
First goto
Settings/More Networks/...
Then first try the lte if not heard using 3g can fix signal connection with custom roms.
Check your apn settings and verify with att/simple talk
And if needed hit the mobile operators and let it do its thing.
Still not working can try fixing another way let me know.
Screens attached and can't post link ig but quick Google search should net you the setting. I did keywords "att apn settings"
Let me know how it goes. Flashing pac rom see how update goes this time for me lol
The signal got a good bit better when I replaced the antenna signal cable. Cost a whole $3.
I'm still 5 or 6 dBi down from my old note 2, but, from my forum reading, that might be the nature of this beast.
I have same problem, poor network, and sometimes when I go to some club or cafe I dont have network and on S2 same network I have full signal 3G, H+