changing the covers on the phone - P3300, MDA Compact III General

Unfortunately, the back (side) casing where the stylus slots in has disintegrated
I have ordered a new casing, but wondered how much of a bugger it is to change over? Any opinions please.....
thanks

its not too bad, just alot of fiddling with clips and double sided tape holding parts together. If you have a look in the Wiki there is a link to a repair manual

mugglesquop said:
its not too bad, just alot of fiddling with clips and double sided tape holding parts together. If you have a look in the Wiki there is a link to a repair manual
Click to expand...
Click to collapse
thanks - will check it out

I've buggered my casing too, I didn't know you could get new ones. Where can I find one and more importantly, how much is it gonna sting?

furrytractor said:
I've buggered my casing too, I didn't know you could get new ones. Where can I find one and more importantly, how much is it gonna sting?
Click to expand...
Click to collapse
Fleabay - China $36 delivered to uk
http://cgi.ebay.co.uk/R519-housing-...ryZ15039QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
like this one...

Related

P3300 Housing cover on O2 Orbit???

Hi, I'm from Portugal and I have an O2 Orbit and I need a new housing cover, but since the O2 isn't on sale in Portugal I was wondering if it is possible to use an HTC P3300 cover instead??? Anyone tried this already???
I might be able to help.
is the cover your after for the battery.. if so pm me and i can send you one out. its an old one i had from my old uk 02 Orbit. Im not sure if the p3300 will fit. maybe some one else can help you, but I dont mind sending it out ya,it's just sat here doing nothing, its is a little worn on the silver bits but better than nothing
mavisdavis - Actually I was thinking about the whole cover, battery front and back, but in fact the worst part is the battery cover... If you say you have a battery cover that you don't use and it isn't any trouble to you to send it to me, I'll sure be thankful!!! I'll pay for the ports of course... If so PM me, ok???
Nevertheless my question remains, is it possible to use a P3300 cover in a O2 Orbit???
Thanks in advance
Hugo Costa
The answer to your question is YES, the P3300 housing does fit the xda Orbit, I had one on mine, I still have it and can sell it to you ?
Again thank you very much for your reply, Think I'll be trying one then...
Jester01 - Also thank you very much for your offer but I think the postal costs will be too high to make it worth sending the cover from UK to Portugal...
Nevertheless PM me with your offer, we never know...
Regards
hcosta said:
Again thank you very much for your reply, Think I'll be trying one then...
Jester01 - Also thank you very much for your offer but I think the postal costs will be too high to make it worth sending the cover from UK to Portugal...
Nevertheless PM me with your offer, we never know...
Regards
Click to expand...
Click to collapse
Can't imagine postage to be that much, as these are very light, I would accept £30.00 gbp for it, it is in very good condition and I will include 3 stili as they are different to the orbit one's.
Jester01 said:
The answer to your question is YES, the P3300 housing does fit the xda Orbit, I had one on mine, I still have it and can sell it to you ?
Click to expand...
Click to collapse
How can you that? XDA Orbit have a locker for the Battery cover, and the p3300 doesnt have, so the extUSB is not in the same position
ryomahino said:
How can you that? XDA Orbit have a locker for the Battery cover, and the p3300 doesnt have, so the extUSB is not in the same position
Click to expand...
Click to collapse
Sorry to say, but it's the same mother board, so check before you post !
And I've had a p3300 oem HTC housing on my orbit for the past few months, yes you are correct with the battery lock, but that's an addition 02 have added.
does it work vise-versa too? will a xda orbit housing fit with no-hassle on a p3300??
thanx
elatirio said:
does it work vise-versa too? will a xda orbit housing fit with no-hassle on a p3300??
thanx
Click to expand...
Click to collapse
elatirio
--------------------------------------------------------------------------------
Couldn't say for definate, but logic states it should as I said I have an Orbit, and used a p3300 housing on it, so there is no reason why it shouldn't work the other way round.
You are just using the components inside and none of the phones original plastics, i.e. you only swap the motherboard, lcd, vibration motor, front earpiece and rear speaker.
You have to also use a different stilus, as they are shaped on the end different.
Hope this helps.
=== The Jester ===
Jester01 said:
elatirio
--------------------------------------------------------------------------------
Couldn't say for definate, but logic states it should as I said I have an Orbit, and used a p3300 housing on it, so there is no reason why it shouldn't work the other way round.
You are just using the components inside and none of the phones original plastics, i.e. you only swap the motherboard, lcd, vibration motor, front earpiece and rear speaker.
You have to also use a different stilus, as they are shaped on the end different.
Hope this helps.
=== The Jester ===
Click to expand...
Click to collapse
makes sense. thanks for the feedback
Jester01: Thank you for your offer, but i managed to get a cover around here, thanks anway.
Case: Artemis vs XDA Orbit
As far as I see from this picture and my Artemis in my hand cases seem to be fully exchangeable... Anyone knows for sure?
sasha817 said:
As far as I see from this picture and my Artemis in my hand cases seem to be fully exchangeable... Anyone knows for sure?
Click to expand...
Click to collapse
They are 100% exchangeable...
Jester01: Thank You pal! Now I would buy XDA's one, 'cause I like it better ^^
I tried fitting the p3300 housing (bought from ebay) on my o2 xda and i couldn't do it, i don't know how but it just wouldn't fit and i could see the housing was bulging unnaturally in various places. I got a replacement xda housing set which fit perfectly.
the version i bought from ebay didn't have the side buttons and there are various bits in the back plate - speaker, vibrate device etc which you need to remember to take out and put in the new one.
also, i seem to be getting very poor reception now, i don't know if this is because i've changed the rom (tried oops, touch 4.02 and rolled back the radio version) or perhaps I damaged the antenna somehow by changing the housing?? - anyone with experience?
thanks.
feridoun said:
I tried fitting the p3300 housing (bought from ebay) on my o2 xda and i couldn't do it, i don't know how but it just wouldn't fit and i could see the housing was bulging unnaturally in various places. I got a replacement xda housing set which fit perfectly.
the version i bought from ebay didn't have the side buttons and there are various bits in the back plate - speaker, vibrate device etc which you need to remember to take out and put in the new one.
also, i seem to be getting very poor reception now, i don't know if this is because i've changed the rom (tried oops, touch 4.02 and rolled back the radio version) or perhaps I damaged the antenna somehow by changing the housing?? - anyone with experience?
thanks.
Click to expand...
Click to collapse
May I ask how much did you pay for that new housing?
For your question, I "guess" that because the housing doesn't fit perfectly, the antenna parts (a metal plate that stick with the body part of the housing) are not attached well to the connector of the phone board. So the signal would be bad.
I said "guess", because I have an experience like this before with my Siemens M55
Oh, one more question which I need to know a lot. Does the front plate (not the battery cover or antenna cover - which of course I knew it's made of plastic) made of Aluminum or plastic?
sombatsombat said:
May I ask how much did you pay for that new housing?
For your question, I "guess" that because the housing doesn't fit perfectly, the antenna parts (a metal plate that stick with the body part of the housing) are not attached well to the connector of the phone board. So the signal would be bad.
I said "guess", because I have an experience like this before with my Siemens M55
Oh, one more question which I need to know a lot. Does the front plate (not the battery cover or antenna cover - which of course I knew it's made of plastic) made of Aluminum or plastic?
Click to expand...
Click to collapse
Thanks, I'll open it up and take a look at the connections - maybe the screws need a bit more tightening.
They both cost around £25 and it's all made of plastic - painted plastic although the XDA case is certainly better quality than the htc design.
I still have the HTC housing which is 'as new'. I'll sell it for £20 if anyone's interested.
How to open the XDA Orbit
Hi,
I would like to change the housing of my XDA Orbit too. But I only found disassembly instructions for HTC P3300 and this instructions did not work. I cant remove the plastic part which covers the gps, gsm and wlan antenna.
Can someone give me a hint or provide disassembly instructions.
Kind regards,
hqqh
hqqh said:
Hi,
I would like to change the housing of my XDA Orbit too. But I only found disassembly instructions for HTC P3300 and this instructions did not work. I cant remove the plastic part which covers the gps, gsm and wlan antenna.
Can someone give me a hint or provide disassembly instructions.
Kind regards,
hqqh
Click to expand...
Click to collapse
I did find some instructions by googling, I think the trick is to peel off the rear part by levering the stylus in it's port.

Im currently Doing a Tmo tp2 housing swap to ebay housing

Just letting everyone know that im changing the housing of my tp2 right now.
currently follow the directions from
http://translate.google.com/transla..._touch_pro2/&prev=_t&rurl=translate.google.fi
I just swap the motherboard out to the new housing. At first glance the motherboards fits in the new housing perfectly. with usb and sd card slots accessible. I think I might lose the reset hole on the side but its really not a big problem from me. I will update my post as I go along.
This is the kind of housing I bought from a different seller off ebay china.
http://cgi.ebay.com/HTC-TOUCH-PRO-2...wItemQQptZPDA_Accessories?hash=item27ab0d20bb
Wery interesting.
I was just wondering, what is the quality of this new housing, keyboard, slider...?
ladodo said:
Wery interesting.
I was just wondering, what is the quality of this new housing, keyboard, slider...?
Click to expand...
Click to collapse
You read my mind.... even before I thought it!
Really this is awesome. please let us know the end result. If it turns out great this just might get a sticky. My tmo casing is thru. best of luck.
Any news??
Please do follow up how it went, and the quality of the housing.
At ~70$ a pop it's not quite cheap.
Pictures...
I am very interested in this as well. I would suggest taking some pics of the entire process though. I have thought about doing this as well. Don't know why Tmobile decided to make theirs look so fugly.

Cosmetic damage. Please advise.

Hi all,
Recently I dropped my beloved phone and now there's an unsightly dent in the corner and the silver border (euro version) is really badly scuffed. It still works though.
But I like my devices pristine so I can't stand to look at it now!
Tbf I can still get £150 for from one of those phone trade in companies.
And can sell an old e71 for just under 100, which can go towards a new different handset.
Or is it at all possible to refurbish anywhere and then attempt a higher sale? I'd rather not wait weeks/months though.
Please offer any advice.
Thank you.
Ibelieve you can buy replacement screen/front cover. I seen a couple posts with links to ebay for them.
Wow, what would you do if your girlfriend had a zit?
HT
burtonsnow8 said:
Ibelieve you can buy replacement screen/front cover. I seen a couple posts with links to ebay for them.
Click to expand...
Click to collapse
Haven't been here for a while but so far can only find battery covers.
redrockv8 said:
Wow, what would you do if your girlfriend had a zit?
HT
Click to expand...
Click to collapse
MAC concealer. Its the best there is.
http://cgi.ebay.com/HTC-Touch-Pro-I...emQQptZLH_DefaultDomain_0?hash=item4cedb2317c
I'm not sure if thats the damaged part, but that is what I was talking about.
mines got the same thing, dent/scratch in the top right corner, but it just adds character
i know if i fix it, i'll just go out and drop it again.
Maybe you could just put a case over it to hide it and protect it from future damage?
burtonsnow8 said:
http://cgi.ebay.com/HTC-Touch-Pro-I...emQQptZLH_DefaultDomain_0?hash=item4cedb2317c
I'm not sure if thats the damaged part, but that is what I was talking about.
Click to expand...
Click to collapse
Thanks for that but unfortunately its the whole silver shiny border thats ruined.
fone_fanatic said:
mines got the same thing, dent/scratch in the top right corner, but it just adds character
i know if i fix it, i'll just go out and drop it again.
Maybe you could just put a case over it to hide it and protect it from future damage?
Click to expand...
Click to collapse
Stupidly i did the opposite. As soon as i dropped my phone i was in such a piss poor mood i just put it in my jeans pocket. I was cursing the stoopid fiddly case!
So aswell as the corner dent, the silvery bit started to peel away. Funnily, every other part of the phone is still in perfect condition.
I doubt any personal buyer would be interested so i think im just gonna give it to Envirophone or other.
Better than other situations where i could've lost it or internally detsroyed..
panos123 said:
I doubt any personal buyer would be interested so i think im just gonna give it to Envirophone or other.
Better than other situations where i could've lost it or internally detsroyed..
Click to expand...
Click to collapse
You might be surprised!! Put a post up in the marketplace section, you might just find an interested party
Why not get another one and save this one for parts. That way when you drop the new one and scratch the back cover you can already have a replacement.

USB Port Cover Replacement

Hi Friends!
I found this and want to share with you:
http://stellatech.com/samsung-gt-i9295-galaxy-s4-active-usb-port-cover-(orange),a,en,815961.html
and
http://stellatech.com/samsung-gt-i9295-galaxy-s4-active-usb-port-cover-(blue),a,en,815944.html
I bought one for me :good::laugh:
Enjoy
vennon! said:
Hi Friends!
I found this and want to share with you:
http://stellatech.com/samsung-gt-i9295-galaxy-s4-active-usb-port-cover-(orange),a,en,815961.html
and
http://stellatech.com/samsung-gt-i9295-galaxy-s4-active-usb-port-cover-(blue),a,en,815944.html
I bought one for me :good::laugh:
Enjoy
Click to expand...
Click to collapse
I just tried ordering it here in the US:
http://www.partsimple.com/gh63-03870b-sam-n-8.html
$10 including shipping. Better than the $30+ for ordering from the UK (cross fingers)
wait for your feedback.
How can we change this part, is a tear off mandatory ?
terisse said:
wait for your feedback.
How can we change this part, is a tear off mandatory ?
Click to expand...
Click to collapse
Turns out they are backordered. In order to replace it, you need some needlenose pliers to pull the anchor out of the phone part. If you just rip it, you likely won't be able add a new one.
sleze said:
Turns out they are backordered. In order to replace it, you need some needlenose pliers to pull the anchor out of the phone part. If you just rip it, you likely won't be able add a new one.
Click to expand...
Click to collapse
More info on the backorder:
"Nationwide BO, Usually ships within 4-6 weeks"
http://www.samsungparts.com/Products/Parts_and_Accessories/PID-GH63-03870B.aspx
Cover finally arrived today. Fits fine.
Sent from my SAMSUNG-SGH-I537 using XDA Premium 4 mobile app
Port Cover
I ordered mine from Amazon and im completely satisfied...it fits a lot better that the original that came with the phone
sleze said:
Turns out they are backordered. In order to replace it, you need some needlenose pliers to pull the anchor out of the phone part. If you just rip it, you likely won't be able add a new one.
Click to expand...
Click to collapse
Do you know if there is a video on how to do this? I think my charging port door is extremely worn out.
Sent from my SAMSUNG-SGH-I537 using XDA Free mobile app
It's also very easy to replace the cover if you just undo the screws on the lower half of the phone and gently lift that part of the back slightly off. Just enough to have the space to fit in your new cover!
Ziida said:
It's also very easy to replace the cover if you just undo the screws on the lower half of the phone and gently lift that part of the back slightly off. Just enough to have the space to fit in your new cover!
Click to expand...
Click to collapse
Can I just buy one off eBay or should I find a specific website to use? Also do you know of any videos that show it being done?
Sent from my SAMSUNG-SGH-I537 using XDA Free mobile app
I haven't purchased extras yet but I can't see why the eBay ones wouldn't work.
I don't know of videos specifically for this but you can check out videos of basic S4 Active disassembling to see where the screws are etc. It's a very minor job.
Tonight I tried forcing one into place with an eyeglass screwdriver and it worked great, so I guess you don't even have to unscrew the back of the phone! You learn something every day
Ziida said:
I haven't purchased extras yet but I can't see why the eBay ones wouldn't work.
I don't know of videos specifically for this but you can check out videos of basic S4 Active disassembling to see where the screws are etc. It's a very minor job.
Tonight I tried forcing one into place with an eyeglass screwdriver and it worked great, so I guess you don't even have to unscrew the back of the phone! You learn something every day
Click to expand...
Click to collapse
Wow that's very interesting. I just found that if I push the port in a certain way it closes fully. I shove the right side in all the way and then push up on the part closest to the screen and its very secure.
Sent from my SAMSUNG-SGH-I537 using XDA Free mobile app
brianisawesome1 said:
Can I just buy one off eBay or should I find a specific website to use? Also do you know of any videos that show it being done?
Sent from my SAMSUNG-SGH-I537 using XDA Free mobile app
Click to expand...
Click to collapse
batterys are in need
vennon! said:
Hi Friends!
I found this and want to share with you:
http://stellatech.com/samsung-gt-i9295-galaxy-s4-active-usb-port-cover-(orange),a,en,815961.html
and
http://stellatech.com/samsung-gt-i9295-galaxy-s4-active-usb-port-cover-(blue),a,en,815944.html
I bought one for me :good::laugh:
Enjoy
Click to expand...
Click to collapse
Saved my life dude!! :good::laugh:
How long are you guys finding that your cover lasted for before needing to be replaced? I've had mine for over 2 years and I haven't had any problems with it.
Mine lasted for about 2.5 years (was slowly falling off, then ripped) the first branch of covers (same as you can find by the links in the first post) that has gray rubber insert was somewhat defective, it can be ripped easily and not closing securely all the time, so Samsung actually replaces them in service centers, I know guy who took his phone to service with faulty display and they replaced display and cover to one similar to Galaxy S5 with flat white rubber insert. I got new one from service for about 5$ and this is a newer one (same as S5's) and to replace it, you just need to undo bottom screws, then easily with fingernail you can lift up back of the phone just a little bit, and old cover (just a piece of it in my case) will fall off, so you just need to put the new one and put button screws back (decorative, round plastic bits you can take off with needle, there are tiny groove for it).
Den90 said:
Mine lasted for about 2.5 years (was slowly falling off, then ripped) the first branch of covers (same as you can find by the links in the first post) that has gray rubber insert was somewhat defective, it can be ripped easily and not closing securely all the time, so Samsung actually replaces them in service centers, I know guy who took his phone to service with faulty display and they replaced display and cover to one similar to Galaxy S5 with flat white rubber insert. I got new one from service for about 5$ and this is a newer one (same as S5's) and to replace it, you just need to undo bottom screws, then easily with fingernail you can lift up back of the phone just a little bit, and old cover (just a piece of it in my case) will fall off, so you just need to put the new one and put button screws back (decorative, round plastic bits you can take off with needle, there are tiny groove for it).
Click to expand...
Click to collapse
Can you post some photos of it? I'm wondering what's so much better about the new ones. I've had mine for 2.5 years as well and haven't seen any signs of wear and tear yet.
Well, first of all, the rubber base is secured better on the plastic cover itself so rubber won't gonna rip off as easy (mine riped off from plastic about a year ago, and now rubber itsetf brake) if you happy with yours, thats good because as for me I didn't had another choise. Before installing new cover I took pictures of new and old, here they are.
I know this probably a dead link, but is the port door made of rubber or hard plastic? It seems to be made of hard plastic.

How to preapere your own back case for one plus one

YOU THINK I AM JOKING BUT ITS NOT JOKE
I WAS ONE WHO NOT PURCHASED ANY BACK CASE WHEN I GET ONE PLUS TO SAVE SOME MONEY
STILL I DON'T HAVE IT
I AM LEAVING IN SO RURAL AREA WHERE AMAZON PRODUCTS REARLY SHIPPED BUT I MANAGED TO GET OPO
FINALLY MANAGED TO PREAPERE ONE PLUS BACK CASE FROM BOX GIVEN BY ONE PLUS ITSELF
THE GIVEN BOX IS SO PREMIUM THAT I WANT TO USE IT FOR BACK CASE
BOX WHERE WE POOT OUR OPO HAVE GREAT FITTING TO PUT OPO
ONLY THING WE NEED TO CUT IT AS IT LOOK LIKE BACK CASE
REQUIREMENTS:-
SCISSOR
BLADE OR CUTTER
MARKING PEN
STEEL PINS
STEPS
1) REMOVE EXTRA SHEET OF PAD CONNECTED TO OPO CASE PRESENT IN U R OPO BOX USING SCISSOR
2) MARK EACH AREA GIVEN BELOW WITH MARKER PEN
SO U CAN CUTT IT CORRECTLY WITHOUT ANY MISTAKE
3) CUT FOLLIWING AREAS WITH BLADE OR CUTTER
AND WHERE ARE MIC POINTS JUST USE PIN TO MAKE WHOLES
1)VOLUME BUTTONS
2)POWER BUTTON AREA
3)SPERAKERS AND USB PORT AREA
4)HEADFONE JACK AREA
5)MIC POSITION PONTS
4) WHEN U GET FINAL PRODUCT GIVE FINAL FINISHING TO EDGES SO IT LOOKS GOOD
I MADE IT FOR FUN PURPOSE
BENIFITS
1) IT FEELS LIKE NEW PHONE IN U R HAND LIKE ORIGINAL BACK CASE
2)AGAIN WHOLE THING IS WHITE SO U CAN MAKE ANY DESIGN ON BACK
3)PROVIDE SOME PROTECTION TO ORIGINAL BACK FROM DUST ETC.
4)EASILY FITS IN POCKET
DRAWBACKS:
1) THOUGH MATERIAL IS PREMIUM BUT IT IS WHITE IN COLOR WITH SOME RUBBERIZED NATURE
IF U FALL U R PHONE IT MAY GET DAMAGED SO NO FULL PROOF PROTECTION
2)EASILY GET SOME DUST ,SMUDGE etc.
4) VOLUME PANEL AND HOME BUT AREA ARE HARD TO CUT IF THEY ARE NOT SHAPED CORRECTLY THEN ITS HARD TO POERATE VOLUME AND POWER BUTTON
5) IT GET FITTED WELL IN CASE BUT NOT PERFECTLY IF U DONT GIVE SOME SUPPORT WITH HAND TO CASE WHEN PHONE IS DOWNWARD IT MAY FALL
SO BE CAREFULL
FINALLY IT JUST FUN PURPOSE BUT GIVE IT TRY U WILL LIKE IT
All caps? Why all the shouting?
[emoji23] [emoji23]
It is actually pretty impressive that you were able to cut that out to such a good fit. My opinion, however, is that the sandstone back is like a case in itself.
Creative solution [emoji106] [emoji106]
ataft said:
[emoji23] [emoji23]
It is actually pretty impressive that you were able to cut that out to such a good fit. My opinion, however, is that the sandstone back is like a case in itself.
Creative solution [emoji106] [emoji106]
Click to expand...
Click to collapse
Thanx for reply
Now my phone is 6 month old
Corners sand stone black is getting worse day by day it is getting removed
Again i falled my phone 2-3 times and it chromium film get some damage
So i thought till get my new back case i should make an alternate solution
It just for fun not fullproof solution as back case
But when u use it u feel very handy than sand stone back case
And surprisingly every one asking which phone this is ( but this is not case previously)
I dropped my phone a few times too, and it looked ugly around the edges. The Housing Frame is really cheap and is pretty easy to replace. The back cover can also be bought for cheap. Once I finally got the parts, it took about an hour and now my phone looks brand new.
But yes, if it is hard to order parts to where you live... make a box case!
ataft said:
I dropped my phone a few times too, and it looked ugly around the edges. The Housing Frame is really cheap and is pretty easy to replace. The back cover can also be bought for cheap. Once I finally got the parts, it took about an hour and now my phone looks brand new.
But yes, if it is hard to order parts to where you live... make a box case!
Click to expand...
Click to collapse
Give some pictures here
About housing frame
And your new back case how it looks
Abd from where u ordered and price
I'm impressed..
Sent from my A0001 using XDA Premium 4 mobile app
Good job, looks really well for the material that you used, great creativity. :good:
walpanmad said:
Give some pictures here
About housing frame
And your new back case how it looks
Abd from where u ordered and price
Click to expand...
Click to collapse
There's some links or suggestions where to buy things in the repair guide thread here.
I bought the Bamboo back instead of putting my old sandstone one back on. It's a bit slippery, but looks awesome.
The housing frame should cost about $10-15
This is awesome. By the way, how do you get lockscreen widgets?
But does not have noise cancel microphone hole beside camera
How is your videos sound ?
geowolf1000 said:
But does not have noise cancel microphone hole beside camera
How is your videos sound ?
Click to expand...
Click to collapse
U have to make all these microphone holes using steel pins its not difficult
Chillz88 said:
This is awesome. By the way, how do you get lockscreen widgets?
Click to expand...
Click to collapse
Lockscreen widget? That are not lockscreen widgets but lockscreen shortcuts to open apps directly from lockscreen.
These are available in all custom roms in lock screen settings
pretty impressive that you were able to cut that out

Categories

Resources