Develop Bugs

Asus P525 NB0 Kitchen by Anper

russian version can be found on:
http://asusmobile.ru/board/viewtopic.php?t=7816
version 080302_1843
This is english translated version of tool for editing of P525 ROM made by Anper.
Sorry for not so quite good english.
Additionally attached utilities for preparing of GIF "AsusP525GIFConverterByMrToto.zip"
About util KitchenNB0.exe:
Warranty: not any, only can say, that not especially include any harmful code to that utility. And before new version posting was firmware changes in mine PPC that made by that util.
don't known if that util works on other models (don't have it), it's tested only on my own ASUS P525. Flashing was made only thru USBloader.exe (don't knew how - read asusmobile.ru or anywhere in other places).
On mine device installed unchanged bootloader from WM6 official.
On WM5 was tested process completion on pc, but without real tests on pocket.
That Utility allow process images ROMGalaxy.NB0 and Galaxy.NB0
(Advised to use ROMGalaxy.NB0 (withiut bootloader), as more safe variant for Your device).
That images can be got by decoding of Galaxy.cap (decode can be done from that util).
First part of tool allow split to parts, and correcterrors in CHS, cut off bootloader, unpack galaxy.cap to ROMGalaxy.nb0 (used data from tool made by Ingvarr).
Second part allow you process IMGFS partition (partition that contain main
software). In that part partition IMGFS can be extracted to file. Get from that DUMP (in future You can do anything you want with that). After that combine DUMP to IMGFS and at the end combine and recalculate checksum of NB0.
splitting and combining functions of IMGFS to DUMP and back executed by Tadzio made utilities. But so they is made for HTC devices, so I'm correct that accordely to ASUS specific. That functions is called from mine tool (execute bat files is not necessary). Correction may be done by pressing button CORRECTION. ROM size is REALLY CHANGED WITH DECREASING OF nb0 image and accordely to size User storage INCREASED - checked (by recompressing of misar firmwares and by other firmwares corrections).
Checksum calculating made is done by tool, but algorhitm is taken from Ingvarr tools (slightly modified to this tool, that does not create all of file image in memory, but recalculate by chunks).
Process ROMs can in different directories, for no all in one place files garbage.
To flash ready file I'm advise thru bootloader and exactly ROMGalaxy.NB0 (without bootloader). Existence of bootloader you can check in first part of tool.
In that complect persist other tools, needed for coocing your rom.
But accordely to them - you must teach it yourself. I'm don't made that.
Also added in third part possibility to change any of parameters in XIP part of ROM (for correct processing parameters must be changed in order: firstly unpacking, changing, packing, and combining NB0).
Work examples:
1. Open NB0, if that not persist - make it from galaxy.nb0 (by cutting off of bootloader) or from galaxy.cap.
2. If that is homemade firmware, possible will be CHS error in MBR. Correct that by pressing button CORRECT MBR. (Why error persist? - Possible our firmware makers ignore that, or firmware was combined by utilities from Tadzio or other that was not adopted for ASUS (also possible CHS not so sensitive)).
Also may appear message about file size differences with sum of sizes of all partitions - it's not harmful - in most cases simple ignore that.
3. Next is Operations with IMGFS tab. In that part can simple do next processes in shown order. Get IMGFS, Create DUMP, edit DUMP as you wish, from DUMP create IMGFS, combine NB0 new and it's all, can flash. For checking you may open newly created NB0 in first part of tool.
4. Flashing may be done by USBLoader.exe.
Another example - correction and optimization of firmware size:
Shortly about compression:
I'm has provided an opportunity to combine IMGFS.new from DUMP with LZX compression (greatest, but slower starting) and XPR.
Choose by pressing needed button. At once want to warn you about not all firmwares have library with compression LZX, accordely to that after flashing, it will not run further to blue screen.
If you have not broke bootloader, this all is reperable (Many peoples through it passed).
Well, like everything, write at a forum.
And a long life for yoursdevices.
P.S. if you found translation errors - please PM to me.
20080303
Translation fixes, exe packed in own archieve as mainly only it changed
1. unpack kitchen ASUS_P525_NB0_Kitchen.zip
2. place ASUS_P525_NB0_Kitchen.exe from exe.zip to directory from 1.

Thanks DaLiV.
Thanks anper.
Great tools.
Wait for Eng version for a long time.
vivi

thanks anper & Daliv
great tools, Great work!

updated translation.

thanks!
Thanks DaLiV, anper!!
Have been looking for the English version!!
gabz

nice. looks interesting.
will give it a try.
but will it work using wm6/wm6.1 as base ROMs?
cheers!

ericjm said:
nice. looks interesting.
will give it a try.
but will it work using wm6/wm6.1 as base ROMs?
cheers!
Click to expand...
Click to collapse
tool work with WM5, WM6, WM6.1 only for ASUS P525.

anper said:
tool work with WM5, WM6, WM6.1 only for ASUS P525.
Click to expand...
Click to collapse
sweeeeet!
thanks for this one anper (and DaLiV for the english translation!)
can't wait!

How
How can we add additional OEM packages into our rom using this kitchen?

as in all other roms ... split by packages by other tools, if you want, but to that tool return ready dump directory

sorry
DaLiV said:
as in all other roms ... split by packages by other tools, if you want, but to that tool return ready dump directory
Click to expand...
Click to collapse
Sorry, But I cannot understand what you mean. Could you please elaborate?

search forum for tool like "buildos+packagetools" or "dmp2pkg" - then edit packages and after that make conversion back packages to dump

Sweet kitchen
Just letting everyone know that this kitchen can also be used for Dell Axim X51's - I have
For X51 users, make sure you don't click "Repair CHS" - it's for ASUS PDAs only and will result in a bricked ROM
btw You can also use recookstruct as well to sort the dump into packages, you may have to get rid of some entries in "HKEY_LOCAL_MACHINE\System\Inbox\Settings\WelcomeEmail\Templates\ServiceTemplates" because recookstruct can't parse the "®" symbol sometimes found in the key
(Only works with IMGFS, not XIP)

Asus P552w ExtRom ( Extended Rom )

Hello. This is my first post here so please take me easy
I've just dumped 6 raw images from an Asus P552w:
2 of them have in the header some "ECEC" string and I guess those are some ROM images from that phone (just like other ROMs I've seen)
1 of them has some "XPR Rf" string in header and I guess is related with Radio ROM (I've saw inside other strings like: GSM, BLuetooth...)
2xFAT16 raw images with files. I can mount Fat16 images (using DaemonTools or from Linux) to see what is inside and I saw is the main FS of the phone and another one has only a few configuration files.
My problem is with the last image EXTROM (it has 16MB and is full with phone operator string "Orange" and operator settings):
1xFAT32 raw image which I cannot mount. This image has the FAT32 structure:
- MBR (end with 0x55 0xAA)
- File System Information Sector (begin with: 0x52 0x52 0x61 0x41 and end with: 0x55 0xAA)
and then after ~3000 bytes is the MBR (ended with 0x55 0xAA) again then only 0x00 and after ~6000 bytes is the MBR one more time , then some 0x0 bytes and then I think there are some files.
Here you have a diagram how it looks:
---MBR
---FileSystemInformationSector
---0x00... 0x00 (~3000 bytes)
---MBR (identical with the 1st one)
---0x00... 0x00 (~6000 bytes)
---MBR (identical with the 1st one)
---0x00... 0x00 (~37000 bytes)
---RAW FILES (I saw a lot of strings there)
Can someone explain to me what is with that ExtROM ? I've searched on this site and I didn't find some tools to dump files inside that image.
I've tried to mount this images with DaemonTools and under linux with no luck. (I've even tryed to do some edit inside that image)

Question
Hi.
This is my first post here too. If I don't bother you too much can you send me on private message how you did the backup for the p552 phone? I have one too locked to orange. I have also got from another forum a P552w rom image that the user I got it from Asus site. The update is no longer available from Asus and this is very strange. I didn't want to put that image on the phone yet because I want to do a backup first (ROM backup).

Check this tutorial: http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom

I have tried following the tutorial but I was able only to dump the data from the extended ROM. When I was trying to save the other partitions I first checked for their length with -t parameter and I always got an error. It only worked for the EXT Rom (partition DSK4 and for the SD card.
By the way, you have dumped the rom from the ASUS P552W (the one that it is NOT sold by Orange) and has the wifi or you have dumped the ROM of P552 (that do not have the wi-fi ... or it is disabled by Orange)? Can you share your rom? If you want I can upload the Ext ROM from my device. I have a Asus P552 (from Orange Romania). It does not have wifi ... or it is disabled.
I have been able to make the firmware from Asus run on my phone ... but I don't want to use it until I can backup my ROM ... and find a way to put the original ROM back if I break something during upgrade.

I gave you a PM with my contact detalis. Talk there

eusuntdexter1 go to downloads extROM p552w
http://asusmobile.ru/board/viewtopic.php?p=201255#201255
You must be registered at forum for download
Filelist_ExtROM_p552w_ROU00:
- GM2WiFiDriver.CAB
- CABforLauncher.CAB
- CallFilter_0409.ARMV4I.CAB
- Disable_NITZ_registries_signed.CAB
- EnableSL.CAB
- EnableTATHidenMode.CAB
- install.OBM.NetworkSetting.CAB
- install.OBM.NetworkSetting1.CAB
- Micco_Battery2.cab
- MoveGettingStarted.CAB
- NVMProxyPatch_Signed_20081009.CAB
- PwrBtn_1022.CAB
- SetDefaultTheme.CAB
- shsettingsCountryCab.CAB
- StartupNetworkSetting.CAB
- Update_MSSIP_size.CAB
- BSP_GM2_MSLRIL_1028.CAB
- BSP_GM2Audio_570_1024.CAB
- ASUSTekBookmarksList.cab
- 1008CameraPatch.CAB
- CLENBOOT.GIF
- PWRONANI.GIF
- Installer.xml
- language_pack_ROU00
Click to expand...
Click to collapse

where?
I didn't see any thing.It's P535 ROM, not for P552w.Please check again.thanks
oh,are there all parts to cook a ROM? how to packet them to new ROM?

hpdefalcon said:
I didn't see any thing.It's P535 ROM, not for P552w.Please check again.thanks
oh,are there all parts to cook a ROM? how to packet them to new ROM?
Click to expand...
Click to collapse
extROM_P552w_WWE.7z - its attached file in to my post , available for downloads registetred users in attached file in to my post , for not registered users can not see file
process of preparing/dump/cooking for 552 ROM described previously posts on forum Asusmobile.ru
We users P535 dumped rom P552 to pull the new Asus Glide end etc. from OEM P552
so,mirror for download ExtROM http://upload.com.ua/get/900647107/

Hello,
Can any one of you share the "broadcom xxx.cab" .
I have an O2 Xda Zest that is made by Asus, but this phone has the microsoft stack and i think that Broadcom is a lot better.
Thanks.

Hi everyone, this is my first post on this forum so please, be cool as i'm kinda newb to windows mobile device
Has anybody been able to download the extended ROM provided by pak1to?
The upload.com.ua link does not seem to work...
thx.

ok, just forget it...google translation works fine, after all.
btw, same file, new link :
http://rapidshare.com/files/190571370/extROM_P552w_WWE.zip.html
Someone try out this archive? especially the "GM2WiFiDriver.CAB" file that is relevant to my interest..?
FYI, i recently get a p552 (without w, delivered by Orange France) and my aim here is to see if it's possible to activate wifi (and asus glide).

lezioul said:
ok, just forget it...google translation works fine, after all.
btw, same file, new link :
http://rapidshare.com/files/190571370/extROM_P552w_WWE.zip.html
Someone try out this archive? especially the "GM2WiFiDriver.CAB" file that is relevant to my interest..?
FYI, i recently get a p552 (without w, delivered by Orange France) and my aim here is to see if it's possible to activate wifi (and asus glide).
Click to expand...
Click to collapse
EXTROM is very easy to reach. The hidden partition name is ASUS_ROM. You type in TotalCommander the path \ASUS_ROM and there it is. It can be copied, deleted, writhed!!!
The GM2WiFiDriver.CAB is an updated driver (sdio.dll) for wifi, but the file is existing also in P552 Orange but is disabled by provider. I haven't find a way to enable it, yet.

i wasn't aware of that, thanks.
btw, even if you install the update for the wifi drv, it won't enable it 'cause if think the device is disabled from bootloader.

Can someone upload the p552w to mediafire filehost.
or send me this file 1008CameraPatch.CAB to test on wm6.5.

here you go :
http://meuhfolle.free.fr/asus/extROM_P552w_WWE/1008CameraPatch.CAB

lezioul said:
here you go :
http://meuhfolle.free.fr/asus/extROM_P552w_WWE/1008CameraPatch.CAB
Click to expand...
Click to collapse
Thank you!

ubiquio (mwg) 501 XIP ported, need help for SYS+OEM

All,
I own an MwG (formerly ubiquio) 501 and eventually started looking for software updates for it. The device is mostly ditto to the imate JAQ3, so I proceeded as follows:
1- get a WM6.1 ROM for JAQ3 (as linked in a thread of this very forum)
2- try to flash it (fail)
3- disassemble the ROM with tools from chinese website (osnbtool.exe)
4- port XIP merging with the ROM of my own device (thanks to the wonderful manual full xip porting thread!)
5- insert my original IMGFS of SYS and OEM
6- success!
the current situation is (settings -> about)
CE OS 5.2.20269 (Build 17936.0.3.0)
The performance boost obtained by upgrading the XIP is significant (keyboard is usable and video playback is ~ 15fps @ full screen), but I would like to perform more optimizations (e.g. switch to .NET CF 3.5) but as soon as I start to work with the dumped SYS and OEM I have troubles, it seems that every kitchen is expecting to work on the XIP (or on .nb and .nb.payload) but such files are not compatible with the one I get from osbntool.exe (but the dump folder is).
Do someone have advice on how to proceed? I would like to either
1-find a kitchen that works with my device
2-go for manual cooking
For 2 I achieved to split the dumped folder to packages and removed some of them, then - as far as I understood - I would need Greloc (got it) and bepe's buildos.exe (nowere to be found )
Is someone willing to help me? Thanks a lot.
Rest assured I am going to share the obtained ROM (I am already willing to share the current one, of course, just drop me a line!)
Best,
DAniele

Chinese "HTC Diamond 2 T5353" problems.

I got chinese "HTC Diamond 2 T5353" with WM6.1 inside. This phone was with french language and I have tried to set up english msimru.dll. Because I had some mistakes, phone now cannot boot up and sleep on splash screen "HTC"
Who know how do hard reset of this phone? It seems like M88 or TM09 inside, have Nand OS.
Haves anybody english or russian language version of update.img for this phone?
PLEASE HELP!

edict said:
I got chinese "HTC Diamond 2 T5353" with WM6.1 inside. This phone was with french language and I have tried to set up english msimru.dll. Because I had some mistakes, phone now cannot boot up and sleep on splash screen "HTC"
Who know how do hard reset of this phone? It seems like M88 or TM09 inside, have Nand OS.
Haves anybody english or russian language version of update.img for this phone?
PLEASE HELP!
Click to expand...
Click to collapse
What the sticker on the back says?
Is it 5353 (+) / 5355 (+) / 5388 (+)
Black Diamond / King Diamond / ..
Most of these devices have ROMs on chinese forums, You just need to know exact manufacturer and model number.

On the sticker I see:
02-8174-085053
T5353
5T524T9521YT1C2
and another sticker with IMEI. No more.
Phone is tri band, camera 2 Mp, 240x400 screen resolution, pdocread gives (as I remember)
NandOS
-- 3.00 Part00 (cannot read by pdocread)
-- 71.88 Part01 (cannot read by pdocread)
NandFTL
-- 41.?? Part00 (this can read by pdocread and it is ExtROM I think)
Can You tell some URLs for chinese forums? I'm newbie in chinese devices

I found keys combination for hard reset.
For Your information (I think all chinese clones of T5353 haves this things) - press "send button"+"power button" together. After screen blink immediately press "send key" again (not release "power key"). You should see boot menu. Using volume keys select menu item and press "windows" key.

how do you like the phone
Is it OK
does it work good
how much CPU, RAM, ROM
and is this really the hard reset combination
thank you very much

HTC T5353 China Clone
I really need help updating to 6.5
device info -
rom version 2.1.27 eng
rom date 11/02/2009
radio version 1.07.9235
protocol version DV3.0
model no NEXPERIA SY.SOL 5209
platform pocket pc
Is it possible to update?

How i update this phone?

Have you tried asking the vendor for the English ROM to update the phone? I've also gotten one of these clones and the vendor gave me the Chinese ROM. He's supposed to get me an English ROM next week.
Meanwhile, I'd like to figure out what the format of that ROM image is so I can cook them myself. The way mine works is by putting a Flash.bin and Loader.bin file on the SD card and going to boot loader. Flash.bin seems to be the one that contains the OS image and everything. It starts with a header B0B0FF.. Here's a thread about the update process: http://www.592zn.com/thread-51422-1-1.html
Bob

English ROM WM6.1
This is link on download english ROM WM6.5 (loader.bin and flash.bin): http://www.rayfile.com/files/d01d9f4a-f636-11de-a4e3-0014221b798a/

Good to see some more discussion on flashing these devices, I am also interested on putting new ROM's on my t5353 clone (maybe update to 6.5 OR put newer manilla/sense etc).
The problem we face is these clone phones are all slightly different from each other. Unlike the people in the sub forums for real HTC phones who all have one thing in similar - their phones have the exact same hardware. For us we need to identify the different types of clones. The best thing would be finding out how much different it is from the real HTC. Asking the vendor is also a good idea, as I believe they flash them before they send them out - so they must have ROM files.
Some people should group together and make a database of dumped ROM's from the most common clone devices (touch king, black diamond, t5355+, etc) and we can begin to anylise the ROM's in comparison to original stock copies of HTC models and see what modifications a clone requires to run the operating system.
I am going to be dumping my ROM from mine when I get it for backup / analysis reasons.

Here it is: http://translate.googleusercontent.com/translate_c?hl=pt-PT&ie=UTF-8&sl=zh-CN&tl=en&u=http://www.592zn.com/viewthread.php%3Ftid%3D54885%26extra%3Dpage%253D1%2526amp%253Bfilter%253Dtype%2526amp%253Btypeid%253D14&rurl=translate.google.pt&usg=ALkJrhjP4uc2mVqxLpJkBgQc92-BkXkZUQ
Use with extra care...
T5353_C02, HOT D2 WM6.5 21882
Energy
http://u.115.com/file/f282d1dd86
energy·mirror
http://www.dbank.com/download.action?
t=40&k=MjM1NjI1MA==&pcode=LCwzNDQ5MCwzNDQ5MA==
speed·
http://u.115.com/file/f2dc0bbdd8
460 - speed - mirror
http://www.dbank.com/download.action?
t=40&k=MjM1Njc4NA==&pcode=LCwzNDQ5MCwzNDQ5MA==

request ..
Kucko34 said:
This is link on download english ROM WM6.1 (loader.bin and flash.bin): http://www.rayfile.com/files/d01d9f4a-f636-11de-a4e3-0014221b798a/
Click to expand...
Click to collapse
Please,
you can this file upload for example on rapidshare.com ? or especiall files "loader. bin" and "flash.bin"
thank you

...
Kucko34 said:
This is link on download english ROM WM6.1 (loader.bin and flash.bin): http://www.rayfile.com/files/d01d9f4a-f636-11de-a4e3-0014221b798a/
Click to expand...
Click to collapse
Please,
you can this file upload for example on rapidshare.com ? or especiall files "loader. bin" and "flash.bin"
thank you

This is for a different model of the phone. My phone is the 5353 model with the Marvell PXA310 CPU and 800x480 resolution. I've got plenty of Chinese ROMs but still no English ROM for it...

the T5353 has a k3 hisilicon cpu, check with profilelevel.exe, I also have a chinese phone mfu w71 and looking for english WM6.5 rom.

ok guys ive been following this thread and i too have a clone t5353 phone. i downloaded the flash.bin and loader.bin files, have put them on my sd card but i cannot figure out how to install wm6.5. i have tried a number of combinations of buttons: return key + end key + power button brings me to a calibrating screen (hangs for a minute and shuts off), send key + windows key + power button brings me to a screen that gives me an error and says img file couldnt be found, send key + end key + power button shows me a downloading screen (hangs for a minute and shuts off). can anyone help me with flashing this rom i am desperate!

hello everyone,
i figured everything out on how to flash my roms but now that i downloaded the flash.bin i cant install it because it says the file does not exist when i run bootloader. i have a chinese wm6.5 i am using now and everything is in chinese so i dont understand a word except the time please give me an english wm6.5 rom in .bin format that works! thank you

You need to have Flash.bin and Loader.bin on the SD card. Then (1) Turn off the phone, (2) while holding the "Hang-up" AND "Back" buttons, press and hold the power button. The phone will vibrate and go to a while screen with boot loader information. At least that's how it works on mine.
Still looking for an English 6.5 ROM though...

Kucko34 said:
This is link on download english ROM WM6.5 (loader.bin and flash.bin): http://www.rayfile.com/files/d01d9f4a-f636-11de-a4e3-0014221b798a/
Click to expand...
Click to collapse
any know about russian rom for clone t5353?

Best would be to figure out how to build Flash.bin ourselves otherwise we'll always have to hope ROMs get posted on the Chinese web sites.
What I was hoping is to extract the OS image from an official HTC ROM (English, Russian, etc) and rebuild Flash.bin with it. So far what I have is:
Extracting the official HTC ROM
1. Download the exe from HTC or other site and extract the exe using 7-zip.
2. NBHExtract.exe RUU_signed.nbh
3. osnbtool -sp OS.nb
4. osnbtool -d OS.nb.OS.nb 1 xip.bin
5. osnbtool -d OS.nb.OS.nb 2 imgfs.bin
Now using the Chinese ROM, you can also do something similar:
1. osnbtool -sp flash.bin
2. osnbtool -sp flash.bin.BIN.NB0
3. osnbtool -d flash.bin.BIN.NB0.OS.NB 1 xip.bin
4. osnbtool -d flash.bin.BIN.NB0.OS.NB 2 imgfs.bin
But I'm now sure now, how to swap the OS part and rebuild Flash.bin. Some site talk about using osnbtool -2bin. Haven't figured it out yet. If someone knows about this, please chime in!
Thanks,
Bob

KS20 WM6.5 Arthemus ROM Multi_Lang (CHT, DEU, USA, FRA, PLK, PTB, RUS, ESN, ITA ...)

Hi,
At the request of several members of the forum I propose a first set of Rom.
As I usually everything is available on Mediafire.
Do not share my Mediafire folder on other forums, but direct your links to this post. Thank you.
Please support me if you appreciate my work
Rom information:
WM 6.5.5 Build 23563 040C/0409/0416/0C0A/0415/0407/0404/0410/0408...?
Language Localization Packages (thanks Da_G)
0401 SAU Arabic المملكة العربية السعودية
0403 ESP Catalan España
0404 CHT Chinese Traditional 台灣
0405 CSY Czech Česká republika
0406 DAN Danish Danmark
0407 DEU German Deutschland
0408 ELL Greek Ellas
0409 USA English United States
040B FIN Finnish Suomen tasavalta
040C FRA French République française
040D HEB Hebrew מְדִינַת יִשְׂרָאֵל
0410 ITA Italian Repubblica Italiana
0411 JPN Japanese 日本
0412 KOR Korean 한국
0413 NLD Dutch Nederland
0414 NOR Norwegian Bokmål
0415 PLK Polish Polska
0416 PTB Portuguese Brasil
0419 RUS Russian Россия
041D SVD Swedish Sverige
0804 CHS Chinese Simplified 中华人民共和国
0816 PTG Portugese Portugal
0c0a ESN Spanish España
Memory:
Storage Total 159,68M Free around 156M
Program Total 90.88 in use around 48M, Free RAM around 43-44MB
Programs and addons:
---Esmertec Jbed
---Arthemus_Spocky_Tools
---Arthemus_QVGA_Dialer
---Arthemus_QVGA_Taskbar_6.5_Light
---SRS_WOW_HD_1_2_1
---ShowcaseSuite-1.1.0(QVGA)
---Task_Manager V3.1
---Skin_BottonBar_WM_65
---Original calculator was replaced by SPB Calc.
---start menu in 3 rows without honeycombs
---SDHC support
---64k_48000hz_celogeek_bluetooth_improve
---Audio_quallity_Fix for_A2DP
---Autoprofile
---More operator.xml (use it with Autoprofile).
---completely freed slot 0.
---pagepool 6MB
Deleted:
---Office 2010
---Many unnecessary things
Fixed:
---Missed call notification
---Low_Battery_Fix
---Waiting_Tone_Fix
---GSM_Reload_Fix
Known Issues:
---Small drain Battery
Donwload -> Clic on MediaFire icon !
http://imageshack.us

with [SKN][Titanium] gchris Titanium amended by me -> Here and my Titanium plugin -> Here

Answers to questions:
For branded phone see this post http://forum.xda-developers.com/show...&postcount=555
For general questions about Nv2, Branded or unbranded phones, flashing, go here http://forum.xda-developers.com/showthread.php?t=405945
and here you'll find a complete LG KS20 FLASHING GUIDE + PROGRAMS + drivers compiled by ibanezman192 : http://forum.xda-developers.com/showthread.php?t=548447
To go back to your original ROM (10B,C...,Kiss 20..), Right after first start, use "Windiag.cab" to enable windiag. Then soft reset the phone. Now you can use the engineer menu 2676625720# and flash in normal mode if necessary.
*No video call ?
I set the [HKEY_LOCAL_MACHINE\Security\Phone\Skin]
"ext"="LgePhoneExt.dll"
*Reboot loop ? (thank's henrylo)
Cause: Used 6.1's file set together with rickou26's flash.bin
Solution:
1. Detach the battery
2. While it is off, holding Browser+Send Button, connect the USB cable to your PC. You should see the green light at the top right.
3. You should be able to select port from LG flash utility. If not, reboot your PC.
4. I used a 10B Chinese DZ file to flash the phone again. I guess any other file set will also do
*NV restore error while flashing ?
For my part, I always flash in emergency mode without making restore NV since I do not use the erase function (EFS to an e once when moving a file to a branded NV -> Unbranded).
*"I can not access my phone plan information-through the dialer, no idea why That Is"
Can you test with this:
[HKEY_LOCAL_MACHINE \ Services \ LPD]
"Dll" = "OemPhoneD.dll"
*how can i remove the spb calculator ?
Go to HKLM\Software\Microsoft\Shell\Rai\:MSCALC end change "1"= spbcalc.exe (56ko) to MobileCalculator.exe (462ko)
Now paste MobileCalculator.exe in windows folder.
*The scroll bar on the right is missing ?
Change
[HKEY_LOCAL_MACHINE\System\GWE]
"cyVScr"=dword:0
"cxHScr"=dword:0
"cxVScr"=dword:0
To
Horizontal scrollbar
cyHScr = 20
Vertical scrollbar
cxVScr = 20
*How to remove TaskBar
Delete this Key [HKEY_LOCAL_MACHINE\security\ResOver\Bitmaps]
Can anobody tell me difference between 25xxx 23xxx & 28xxx rom branches?
-> Here
*The ringertones does not work at all and the Windows Media Player
-> Here
...is there a way to remove the animated boot screen ? (mainly to remove the sound)
-> Here
*Autoprofile use
Copy your provider profile in
Directory -> Windows\NetworkProfiles . Start Autoprofile and select your NetworkProfiles
*Caller ID Fix
-> Here
*BT Radio Fix
-> Here
Arthemus

Other Branch developing
SEMC sony ericsson Branch
22024_0409 AKU 5306 Windows CE: 5.2 Build 4911 (May 18 2010. 15:43:30)
LG Electronics Branch
23668_0409 AKU 5307 Windows CE: 5.2 Build 4585 (June 17 2010. 16:05:08)
23673_0409 AKU 5307 Windows CE: 5.2 Build 4587 (July 1 2010. 15:43:43)
SEMC - Sony Ericsson Branch
25018_0409 AKU 5307 Windows CE: 5.2 Build 5914 (June 24 2010. 15:45:38)
COM3, continuing development
23127_0409 AKU 5307 Windows CE: 5.2 Build 4158 (June 22 2010. 12:12:09)
here is 23153_AKU5314 build New update october 2011 New !!!
COM2, this branch has the older UI but is more stable in terms of functionality
21916_0409 - AKU 5095 Windows CE: 5.2 Build 3833 (August 6, 2010 16:49:39) New ! (V2)
I consider the 21916 build as the most successful ROM with wm 6.5.
unknown
The 29007 Build that's the latest in the 6.5.3 03/08/2011
29017_0409 0404 Windows CE: 5.2 Build 6211 (Jan 26 2011. 9:44:01)
29020_0409 Windows CE: 5.2 Build 6212 (Mar 13 2011. 15:48:25)
Arthemus...

Thanks
Can be a Chinese version of the <0404>

Hello,
Can you give me a link to a Chinese ROM?

This possible?
Traditional Chinese HKG Unbranded 10b
megaupload.com/?d=ISY3731M
To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed
I can not add a link! Sorry!
Hope that you will understand!

Ok I look at it. 0C0A current

can you make one german version of this rom?

hi rickou,
flashed my phone with french version
works very good for this time.
big thx for this job !!

rickou26 said:
Hi,
At the request of several members of the forum I propose a first set of Rom.
As I usually everything is available on Mediafire.
Please support me if you appreciate my work
Rom information:
WM 6.5.5 Build 23563 040C/0409/0416/0C0A...?
Hi Rickou,
among the four builds, which one is the english rom? Tnx for rom. very nice work indeed!
Click to expand...
Click to collapse

hi Rickou,
downloaded and flashed each rom. the build 23563_0409 is the english version. Tnx for the rom!

Very good build and rom, after a couple hours of testing. Seems like the standby battery draw doesn't seem quite as good as on 25014 though and GSM reload is a little slower.

rickou26 said:
Ok I look at it. 0C0A current
Click to expand...
Click to collapse
Hi, Thanks for supporting this cell. I appreciate all your works!
I flashed the 0c0A version, but it seems like it's a Spanish version. I searched and found out that the Traditional Chinese is either 0404(Taiwan), or 0c04(Hong Kong).
Could you make a version under either one? I am using the Eng Version(0409).
Thanks!
FYI, if you want to know the language code: google it with "Language Codes - Sorted by Codepage"

Deosneos said:
Very good build and rom, after a couple hours of testing. Seems like the standby battery draw doesn't seem quite as good as on 25014 though and GSM reload is a little slower.
Click to expand...
Click to collapse
I think the build 250xx work a little better but I do not have Rollup-All-Pkgs to the ROM Multi_lang.

Hello,
To speed up my work I need to translate the following files in the language concerned. Please open the file. dat with the notepad and then correct directories: Start Menu \ Programs, StartUp ... etc. work is simple and quick for someone mastering the language but rather long for me
Thank you.

Sugaone said:
can you make one german version of this rom?
Click to expand...
Click to collapse
Hi Sugaone,
Geve me a link of KS20 german rom

0816 Portuguese Portugal
Hi Rickou26,
Can you make the rom for Portuguese Portugal?
Put a zip file avalable for 0816 language and I can do the translation.
Thanks!

rickou26 said:
Hi Sugaone,
Geve me a link of KS20 german rom
Click to expand...
Click to collapse
it dosn´t exist one wm6.5 ks20 rom
i can give you one link of a german wm6.5 htc polaris rom.
can you take the language from this?

500mdh said:
Hi Rickou26,
Can you make the rom for Portuguese Portugal?
Put a zip file avalable for 0816 language and I can do the translation.
Thanks!
Click to expand...
Click to collapse
please
and thanks for all your great roms
best regars
Fuinha