Hello everybody,
I've a p3600 with the udk 6.1 italian rom. It's a good rom, although i cannot try the luigi.ing 3.42 yet, since it's not free.
I noticed that it's impossible to share the internet connection of th pc, even if you tick "the usb a pc" setting. It's normal? Could some one help me/us?
thansk in advance!
Emmeci said:
Hello everybody,
I've a p3600 with the udk 6.1 italian rom. It's a good rom, although i cannot try the luigi.ing 3.42 yet, since it's not free.
I noticed that it's impossible to share the internet connection of th pc, even if you tick "the usb a pc" setting. It's normal? Could some one help me/us?
thansk in advance!
Click to expand...
Click to collapse
Internet Connection is shared by default when connected to ActiveSync or Windows Mobile Device Center either through USB or Bluetooth.
tnyynt said:
Internet Connection is shared by default when connected to ActiveSync or Windows Mobile Device Center either through USB or Bluetooth.
Click to expand...
Click to collapse
I got the error "impossible to connect. check proxy and remote connection, then try again".
Thanks for the rapid reply
Emmeci said:
Hello everybody,
i cannot try the luigi.ing 3.42 yet, since it's not free.
I noticed that it's impossible to share the internet connection of th pc, even if you tick "the usb a pc" setting. It's normal? Could some one help me/us?
thansk in advance!
Click to expand...
Click to collapse
you can try the luigi.ing 3.42 rom, You have only "to buy" it!!!
Related
Ive installed wm6 black and 3des.1 cooked roms of wm6 and I definitely want to keep wm6 for now, however I am totally unable to connect my Hermes to my laptop for use as a modem . I have tried the internet sharing option which seems to do nothing (on the old wireless modem app it would request drivers, when switched on this one just says 'limited or no connectivity' and doesnt request any drivers at all).
My favoured method however was to use bluetooth DUN, but when attempting to pair the devices with wm6 i simply get told 'Services requiring registration were not found by bluetooth settings. The specified device provides the following services: FTP, OPP and BIP'.......basically no DUN option there at all.
I have tried activating internet sharing via bluetooth before pairing and this made no difference.
Please help someone - I really like wm6 but I need to use my phone as a modem when I'm out and about. I had no problems with wm5.
My OS is XP Pro SP2 and the current ROM on my device is 3DES.1.
I've checked these forums for help with no luck, so any advice would be greatly appreciated
leoni1980 said:
Ive installed wm6 black and 3des.1 cooked roms of wm6 and I definitely want to keep wm6 for now, however I am totally unable to connect my Hermes to my laptop for use as a modem . I have tried the internet sharing option which seems to do nothing (on the old wireless modem app it would request drivers, when switched on this one just says 'limited or no connectivity' and doesnt request any drivers at all).
My favoured method however was to use bluetooth DUN, but when attempting to pair the devices with wm6 i simply get told 'Services requiring registration were not found by bluetooth settings. The specified device provides the following services: FTP, OPP and BIP'.......basically no DUN option there at all.
I have tried activating internet sharing via bluetooth before pairing and this made no difference.
Please help someone - I really like wm6 but I need to use my phone as a modem when I'm out and about. I had no problems with wm5.
My OS is XP Pro SP2 and the current ROM on my device is 3DES.1.
I've checked these forums for help with no luck, so any advice would be greatly appreciated
Click to expand...
Click to collapse
This has to do with the fact that ics doesn't work with the toshiba bluetooth stack.... If you change to the microsoft stack on yout XP laptop you will be able to use ICS.
Cheers,
HJ
only problem is, that not all PC bluetooth device have this choice, I mean change stack to microsoft.... before you buy any BT stick, look at manufarcuter web, if it is possible to use MS stack. I dont want to make propaganda for MSI products, but there is few BT, which have this choice. actually I using THIS one, and here is possible to install MS stack. here is manual, how to install this device with MS BT stack.
PS: this question has been answered XXX times, so try to search before ask
my bluetooth is integrated into my laptop, hence the convenience. why have microsoft taken a seemingly downward step in windows mobile 6 and made it even LESS compatible than before?!? seems a bit stupid to me.
Also this doesn't answer the question of why I am unable to connect my device via USB. I need this function for work. is there any way of installing the old wireless modem app as a simple solution?
thanks everyone for your help so far
i have same problem with my laptop , the BT device is built in and not supported by microsoft stack.
Also the usb is a problem , i installed activesync 4.5 but when i start internet sharing it tell there is no or limited network activity so doesn't work with usb too
Does someone know if widcomm stack can work too ?
i can confirm the microsoft stack work fine on pcs where the BT device is supported ....
Can someone help ???
THX
vdavide said:
i have same problem with my laptop , the BT device is built in and not supported by microsoft stack.
Also the usb is a problem , i installed activesync 4.5 but when i start internet sharing it tell there is no or limited network activity so doesn't work with usb too
Does someone know if widcomm stack can work too ?
i can confirm the microsoft stack work fine on pcs where the BT device is supported ....
Can someone help ???
THX
Click to expand...
Click to collapse
Care to tell us what laptop are you using and what bluetooth stack involved because some hardware could be forced to be supported by the MS driver.
sorted
VDAVIDE, you may be pleased to hear this.
just TURN OFF BLUETOOTH in comms manager, go to internet sharing and select USB/T-mobile (or whatever your connection is called) then hit connect. It then just connects as a local area connection - no need for drivers - nothing - it's absolutely brilliant and means I can just plug and browse on any laptop. Screw the bluetooth connection, I'm sticking with USB - more reliable, more convenient and it charges my phone too.
---deleted---
leoni1980 said:
VDAVIDE, you may be pleased to hear this.
just TURN OFF BLUETOOTH in comms manager, go to internet sharing and select USB/T-mobile (or whatever your connection is called) then hit connect. It then just connects as a local area connection - no need for drivers - nothing - it's absolutely brilliant and means I can just plug and browse on any laptop. Screw the bluetooth connection, I'm sticking with USB - more reliable, more convenient and it charges my phone too.
Click to expand...
Click to collapse
THX for reply , but as i wrote also the usb is not working ... i tried as u wrote but the pc say " no or limited network activity , error is : can't get IP address from the device " .
@ Ciphol :
i'm running XP home with SP2 , my laptop is ASUS A6 series model Z92J with internal BT 183 2.0 + edr module ( manifactured by toshiba ) that seem to be an usb module .
The only BT stack supported by the BT183 is the ( obviously) toshiba stack .
I reistalled the BT183 toshiba drivers manually ( not the stack software ) but the module is ignored by MS stack....
I searched for drivers on the net but no lucky.
Any help is appreciated , thx again
vdavide said:
THX for reply , but as i wrote also the usb is not working ... i tried as u wrote but the pc say " no or limited network activity , error is : can't get IP address from the device " .
@ Ciphol :
i'm running XP home with SP2 , my laptop is ASUS A6 series model Z92J with internal BT 183 2.0 + edr module ( manifactured by toshiba ) that seem to be an usb module .
The only BT stack supported by the BT183 is the ( obviously) toshiba stack .
I reistalled the BT183 toshiba drivers manually ( not the stack software ) but the module is ignored by MS stack....
I searched for drivers on the net but no lucky.
Any help is appreciated , thx again
Click to expand...
Click to collapse
Connection through USB supposed to be ok, hmm... but you can try to force the bluetooth hardware to be supported by the MS driver. Could you please do this and give me the details.
The step:
1. Start > Control Panel > System > Hardware > Device Manager
2. Find the unknown USB driver ( The one with the ? beside it)and right clicking on it > Properties > Details > Click the dropdown option and select 'Hardware Ids'
3. You will see something like 'USB\Vid_044E&Pid_300c&Rev_1915' and maybe 'USB\Vid_044E&Pid_300c'.
4. Write down the Ids. and post it here.
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
vdavide said:
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
Click to expand...
Click to collapse
I hope you've given me the complete Ids.If so then try this one. Backup the original bth.inf inside \windows\inf\ folder and replace with the one from this archive. Now try to install again by pointing to the new bth.inf. But please uninstall any previous installation first. If not success then tell me since I'm trying to use the widcomm stack.
thx CYPHOL , i will try tomorrow
i'm added the original inf file for this device ...
vdavide said:
@SORTED
Sorry about my last post , turning OFF the BT on the tytn allow internet sharing to work with USB ( but drivers for usb networking must be installed before , i.e. install activesync 4.5 that as the drivers ...).
in my last test the BT was ON and usb not working ...
THX
@CYPHOL ....
here is : USB\VID_0B05&PID_1712\0194E8-5B-0002
If need i can post the inf file for this device from toshiba bt stack
THX
Click to expand...
Click to collapse
I tried the Internet Sharing facility on my XP tower upstairs (which has never had Activsync on it) and it works just the same - no need for drivers - it's as if I'm just plugging an ethernet cable in.
Be interested to know if the same will be true of old laptops with SP1, as is mine at work.
I am trying to connect using USB and nothing happened. No activity or anything on the laptop and I can't connect to the Internet.
I am runnign Sony VAIO and I have ActiveSync 4.5. I have an MDA Compact III (with built-in GPS) running WM5 and it also have the "Internet Sharing" application. I connected this device with Internet Sharing running and all works well.
What am I missing frommy 8525/TyTn with WM6?
lanwarrior said:
I am trying to connect using USB and nothing happened. No activity or anything on the laptop and I can't connect to the Internet.
I am runnign Sony VAIO and I have ActiveSync 4.5. I have an MDA Compact III (with built-in GPS) running WM5 and it also have the "Internet Sharing" application. I connected this device with Internet Sharing running and all works well.
What am I missing frommy 8525/TyTn with WM6?
Click to expand...
Click to collapse
WM6 is using PANU whereas WM5 is using NAP as to connect through Bluetooth but if you use USB it should connect as is only that you have to switch the bluetooth off before making the connection.
FYI, I'm using Vaio VGN-TX37GP and can connect through both the USB and Bluetooth conns. after modifying the infos on the MS inf driver file.
@CYPHOL
Dear Cyphol, thx , i can now use my laptot with BT internet sharing using your modified bth.inf . MS stack is now running
Only one thing , the line you edited has an error but fixed and working
thx again !
vdavide said:
@CYPHOL
Dear Cyphol, thx , i can now use my laptot with BT internet sharing using your modified bth.inf . MS stack is now running
Only one thing , the line you edited has an error but fixed and working
thx again !
Click to expand...
Click to collapse
Nice to hear that but sorry for my careless mistakes done in doing the scripting.
I got ths same issue.
Im having the same problem with my laptop. Im using a sony ux90 umpc. Do you think this same fix would work for me, or how do I tell. Is there a link to this problem, I've been searching for this for hours now. Thanks for the help.
briols6 said:
Im having the same problem with my laptop. Im using a sony ux90 umpc. Do you think this same fix would work for me, or how do I tell. Is there a link to this problem, I've been searching for this for hours now. Thanks for the help.
Click to expand...
Click to collapse
Check this post:
http://forum.xda-developers.com/showthread.php?t=298691#10
Can anyone verify if WM6 on the Trinity brings back the Bluetooth DUN profile?
I'm 95% happy with the Dopod WM5 ROM on my P3600, the only thing missing is that I can't get traffic updates to my tomtom 910.
Hi, I am using mun's 2SE rom and I can now get traffic updates on my tomtom 910.
I did not have to do anything special on the SE version, it just worked.
WM5 etc would not see anything other than the BTHF profile.
all workign now
BMF
Very VERY good news, off to go download WM6 now
I just downloaded and installed mun's 2SE (flawless install). Wow is my phone better
Anyway, it does enable TomTom 910's traffic updating. I had to "delete" my phone from the TomTom 910 and then reconnect to it.
Simple.
Is there any possibility this Bluetooth patch can be worked into the WM6 releases for the Hermes??
I have exactly the same problem (no DUN profile), but on the Hermes.
DOH!
just upgraded to muns TE version of 6 and tomtom 910 does not see bluetooth DUN
the SE version worked sweet with TT910.
BMF
badmelonfarmer said:
just upgraded to muns TE version of 6 and tomtom 910 does not see bluetooth DUN
the SE version worked sweet with TT910.
BMF
Click to expand...
Click to collapse
I found solution) here it is http://forum.xda-developers.com/showpost.php?p=1281328&postcount=882
My Tom Tom GO 700 reports this error during the configuration.
"This phone does not report Wireless data connection (DUN) cabalities."
I have loaded mentioned CAB's.(SP1 and BT_DUN) Is ther a hope on getting this going?
thanks Peter
After adding new cabs, delete phone from TomTom, delete TomTom relationship from phone. Resync.
done what you hav sudgested, but no good. Still the Error about phone does not report wireless data connection (DUN).
I gues will have to go back to previous release.
psimek said:
done what you hav sudgested, but no good. Still the Error about phone does not report wireless data connection (DUN).
I gues will have to go back to previous release.
Click to expand...
Click to collapse
try to add this reg entries and files... sorry don't have time to make a cab
Thanks MuM,
Phone is recognized, but cannot connect to cingular.
I will try to play with more settings before I go back.
Peter
Where to Install MODEMLINK?
Where should the contents of MODEMLINK be install? Windows dir?
Thanks
mun_rus said:
try to add this reg entries and files... sorry don't have time to make a cab
Click to expand...
Click to collapse
Please kindly advise where I should put those reg entries & files? TKS & RGDS!
dan.gior said:
bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
Click to expand...
Click to collapse
to connect over usb you need usb rdiver HTC for pc...
here:
to connect over usb you need usb rdiver HTC for pc...
here:
So I'm a bit confused, does that mean we can use a data connection on the Hermes via Bluetooth for the TomTom 910?
I recommend you this thread, that's the way I got tomtom go data connection and plus services working with my wm 6-updated wizard:
http://forum.xda-developers.com/showthread.php?t=314371&page=3#21
dartrax
ervius said:
to connect over usb you need usb rdiver HTC for pc...
here:
Click to expand...
Click to collapse
Thanks worked painlessly on my O2 Orbit (Artemis/3300).
What a great site - I've learnt loads already and lookforward to overclocking next!
Neil
connected my new smartphone shadows with tom tom go 700
After 5 days of struggle, I finally was able to connect my wireless data (DuN) with my tom tom go 700.
What i did is as follows:
extract the attachment and do the following:
1. Unlocked my phone app for tmobile
2. installed WM6_btdun
soft reset
3. copied all files of SPDUNHACK including registary one to the windows folder(\windows)
4. Installed the installed ATCUI, showed me a serial (COM:1) port
softreset
and connected my tom tom...
But as the experts mentioned earlier, while your tom tom is connected, you are not able to surf the net but able to do all other things. It says voice call active.
Good luck!
good day to you
i know it's sound silly to do it but i'm from israel and we don't have hebrow support to wm6 smartphone so i need to downgrade from wm6 to wm5 and i want to know if somone can give me link to download the BEST wm5 rom for this gadget and how can i do it?
thanks.
i found some wm5 rom for the dash but i having some trubble installing it
there is somthing strange it's telling me that i need to disable the usb connection???? if i will do that the computer will not find the dash...!
so i don't know what to do
Make sure you're doing this after you loadup active sync. The Rom installer prompts however its normal. Let it go through.You may have to reboot your PC after the first time it asks you this but try again. Usually the 2nd time it'll go through
USB connection
U need to diable the USB connection in the activesync only (remove the checkmark next to the "allow USB connection")
Hello James,
Can you please provide me with the link for windows mobile 5.0 download. I am also trying to downgrade from WM6 to WM5. Your help would be sincerely appreciated! If you can send me the attachment in an email at "[email protected]", that would be really great..
Thanks
May I please have the link to WM5 as well? My e-mail address is [email protected]
Thanks!
I was trying to upgrade my Qtek 9000 but something goes wrong and now I can't start my Qtek, it shows just USB on up of the screen when I connect it to USB and down shows it v2.01 , when I unplugg it, it shows up Serial and down v2.01
Can you write me - what application I shall use to get my Qtek working?
I think I need complet flash ROM and erease all in my phone and then copy all again. Please copy me hyperlinks where I can download the applications
Thanks
Someone will come here to tell you: "read the wiki here!"
Well, you surely have to do it, then you'll discover that you have to download a program called "mtty" ver 1.42 (if I'm not wrong) and follow the instructions under "stuck on bootloader screen" under the wiki.
You have to format your device and install a new ROM. May I suggest you Tomal's 8.2? 'Till now I can say that it's wonderful!
Good luck resuscitating your Uni!
Welcome to the forum
I would recommend Tomal v8.5, the best I ever used!
And don´t forget to vote please!
orb3000 said:
Welcome to the forum
I would recommend Tomal v8.5, the best I ever used!
And don´t forget to vote please!
Click to expand...
Click to collapse
hi, have a question. are u using tomal's version,did u managed how to change weather from dhaka to different town?thanks for any reply.
Rexton270 said:
hi, have a question. are u using tomal's version,did u managed how to change weather from dhaka to different town?thanks for any reply.
Click to expand...
Click to collapse
Yes, I just selected my city (Xalapa, Mexico) and voila!
No problems so far with this great ROM!
orb3000 said:
Yes, I just selected my city (Xalapa, Mexico) and voila!
No problems so far with this great ROM!
Click to expand...
Click to collapse
sorry,i'm new on wm. i tap&hold on dhaka,then delete it,and type my town. but still shows dhaka. and also how do you restart ur ppc universal?
I'm doing all that... but my PDA is not recognized by PC!!!
HELP!!!!
anthouser said:
I'm doing all that... but my PDA is not recognized by PC!!!
HELP!!!!
Click to expand...
Click to collapse
did you uncheck "allow usb connections" on ActiveSync?
are you trying to upgrade in Windows XP or Vista?
did you read the wiki Universal is Stuck at Bootloader and it unrecognised
here is the link:http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
Rexton270 said:
sorry,i'm new on wm. i tap&hold on dhaka,then delete it,and type my town. but still shows dhaka. and also how do you restart ur ppc universal?
Click to expand...
Click to collapse
I´ve just selected form the city list and thatá all! my city appear!
To restart your Uni insert the stylus in the small hole on the back, behind the mini usb
Plase read the Wiki!!
hi i have a imate jasjar, the problem is i cannot connect to gprs it gives error message to check setting etc etc. i have same setting on another windows mobile,
i tried all radio roms update and also full rom update but no luck.
rest all function is ok even wifi is ok.
any solution.
regards
gopal
gopalg73 said:
hi i have a imate jasjar, the problem is i cannot connect to gprs it gives error message to check setting etc etc. i have same setting on another windows mobile,
i tried all radio roms update and also full rom update but no luck.
rest all function is ok even wifi is ok.
any solution.
regards
gopal
Click to expand...
Click to collapse
Ok first of all there are few service provider cab you can find for your country... well i had problem to get GPRS working tried the customer service but no use... then i installed the cab (for me it's optus, Australia) and i didn't need to touch settings at all .. it just connected automatically to GPRS... so best option will be to find the appropriate service provider cab for your country and install...
Cheers
Rajiv
thanks rajiv,
but the issue is not with settings , i just want to make sure whether it is some hard ware issue, all functions are perfectly ok and it is a friends handset and we have used gprs some time back also.
br
gopal
gopalg73 said:
thanks rajiv,
but the issue is not with settings , i just want to make sure whether it is some hard ware issue, all functions are perfectly ok and it is a friends handset and we have used gprs some time back also.
br
gopal
Click to expand...
Click to collapse
Bro it's really hard to tell weather it's hardware isuue or not from such a little information... but it should not be hardware issue in my opinion... well try different service provider and try to install the cab and see... it should work...
Cheers
Rajiv