Related
Not sure does anyone else have the same problem, I can't seem to log in VPN network through wifi in my school.
Tried bother Black Edn. v1.1 and v1.2, neither one can go through.
Anyone who succeed care to share the settings? I was told my log in ID or Password is wrong.
Or maybe it's the network which doesn't support WM6 yet?
Nobody uses VPN here?
I have the same issue, done a search and it appears that the TCP/IP stack is not binding with the VPN client software. This appears to be a general issue, I use the Checkpoint secure remote client but it also does not work with Cisco, maybe others. Unfortunately I do not know of a work round.
Malcolm
I have exactly the same issue with my WM6. I use the AT&T dialer on my laptop and try to connect over the umts connection created between my HTC Universal WM6 via usb connected to my laptop.
If you have any updates on this I would be grateful.
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
here's remote desktop. How do you use it? I don't know how to set it up.
thanks!!!!
now for VPN....
cheers!
The remote desktop client is available in several places in this forum for download.
To set up a VPN:
add a new VPN server connection
enter the name / ip of the server you want to connect to
select the vpn type -- ipsec or pptp
next
enter your user name and password
finish
The only way I have found to connect to the von is to goto
Start-Settings-connections-connections-edit my vpn servers- -- tap & hold MY VPN
select connect
you must be using a plan that assigns you a public IP (not WAP)
hope this helps
JTK said:
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
Click to expand...
Click to collapse
Thanks cmccarter, done it but how will I know I am connected.. It does not say connected anywhere that I can see and when clicking/hold on the item it gives me the option to connect again, not disconnect as I would have thought The other thing is terminal server does not connect. It connects fine on USB. VPN/Remote desktop connects fine using normal internet on pc from outside the network. So I believe the network settings are fine.. How would I know though if I am on WAP or get an IP. Also ow would I know if the VPN is connected?
thanks
fyi
i also have struggled getting rdp to work over a vpn, in particular over 3+/hsdpa
the only i found in wm5 was to add the vpn connect to the exceptions list of the connection manager, so that it didnt disconnect the vpn whem connecting the rdp.
this occurs more when u use an ip address to connect to a work intranet.
suppose if u use the dns name of the machine and not the ip address then it isnt that much of an issue. in wm5 when u put the ip address in it assumes a an internet rather than intranet connection so it disconnects the vpn to look for the ip over the internet
putting the ip into exceptions forced wm5 to not disconnect it when rdp was looking for it.
i cudnt get it to work this way in wm6 so i am also looking for an answer on this.
rdp to my servers when they have crashed and i am on the road wud b wonderful....
Hi,
I've a similar problem.
I use a VPN-1 SecuRemote that normally connect my PC directly to the company network.
Well, using the share modem tool, I'm not able to reach the gateway.
the share modem system give me a private IP that establish a connection between PC and TYTN.
This connection use the Tytn like a gateway to navigate in internet.
Someone know to solve this issue?
Tanks a lot
if i select start the vpn connection, nothing happens - and i can`t ping the IP`s in the VPN. so i think the vpn ist not open - OR the routing entrie is missing....
is there some shiny "pptp - standalone" client?
greets, Nik
for some reason i dont think the vpn option works over 3g/hsdpa, atleast not on my device using t-mob web and walk.
if i connect the vpn when using wifi it connects and everything is fine, if i try and connect when i'm already running a 3g connection it doesn't work.
i dont think the radio stack is capible of handling a 3g connection and a vpn connection. we might need to go down the route of getting a seprate wm vpn client.
Accessing & Using the internet via USB
I have an unlocked HTC S620 & TyTN (Hermes).
When I connect the TyTN to the USB I am able to browse the internet as the phone uses the PC as a gateway automatically.Even if I do not setup a profile for activesync and the software recognises the device as "Guest". I am ceretain that this is the case and not accessing the service via the carrier or WiFi as I have enabled flight mode and been able to use the internet on the TyTN, browsing, using IM+ Mobile Mesenger etc.
I do not find the same functionality with the HTC S620 (T-Mobile Dash). Does anyone know how to get this functionality going?
Usually you always need to make a partnership for internet pass through to work. Strange you don't with the Hermes.
indiekiduk said:
Usually you always need to make a partnership for internet pass through to work. Strange you don't with the Hermes.
Click to expand...
Click to collapse
When you say partnership I asume you mean bluetooth.
I Turned on Flight mode and diabled bluetooth on the TyTN, connected it to the PC. Activesync came on and I cancelled setting up a profile so it was registered as guest. I got internet access via the usb cable connected to the PC. The same is not working for the S620.
I guess the distinction between the two is the TyTN is a Pocket PC and the S620 is a smartphone. There are various Ethernet Miniport Cards available for configuration on the TyTN. You find these under Settings>>NetworkCard>>Network Adapters. The one I find that shows up as connected is IEEE 802.11b/g Compatible Wifi Adapter, this I find strange as the device is in flight mode. The S620 does not have all the features and configurable network adapters under settings. Simply put a smartphone will not have all the networking capability of the Pocket PC
Let me know your thoughts please, or if you have another solution.
Here is how I got mine working.
1) Connect phone to pc.
2) Make sure ActiveSync shows connected.
3) Under ActiveSync Window select File->Connection Settings...
4) Change the "This computer is connected to:" setting from "Automatic" to "The Internet".
5) Under you phone go to IE -> Menu -> Tools -> Options -> Connections and make sure "Automatically detect settings" is enabled.
That's it. You should now be able to browse the internet through your pc connection.
Forgot to mention I am using ActiveSync ver 4.5.
Dash Internet Sharing Files on S720
On my HTC S720, there was no Internet Sharing option, even though it is WM6 unit. So after reading lots of threads on here and hofo, found out Blackjack had similar issue, as well as some WM5 devices running AKU 3 or higher.
So I copied intshrui.exe, intshare.dll and intshrui.lnk from Dash WM6 Rom dump, created relevant registry entries as:
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\intshruiapp]
[HKEY_CLASSES_ROOT\intshruiapp\DefaultIcon]
@="tapres.dll,-14294"
[HKEY_CLASSES_ROOT\intshruiapp\SelectIcon]
@="tapres.dll,-14295"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSINTERNET_SHARING]
"0"="MSINTERNET_SHARING"
"1"="IntShrUI.exe"
"2"=dword:00000001
"3"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Rai\:MSINTERNET_SHARING\Session]
@=hex:00,db,4d,43,70,b9,c7,01
Then run intshrui.exe and while I can connect via Bluetooth PAN, I couldn't get any IP. I also tried a static IP and that didn't work as well. I investigated a little more, and found another key:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Comm\ConnectionSharing]
"DisabledOnBoot"=dword:00000001
"EnableAddressTranslation"=dword:00000001
"EnableDhcpAllocator"=dword:00000001
"EnableDnsProxy"=dword:00000001
"EnablePacketFiltering"=dword:00000001
"PrivateInterface"=""
"PublicInterface"=""
"SetLastDhcpAddrToIEH"=dword:00000001
[HKEY_LOCAL_MACHINE\Comm\ConnectionSharing\Driver]
"Dll"="ipnat.dll"
"Flags"=dword:00000002
"Index"=dword:00000000
"Prefix"="NAT"
Then I copied ipnat.dll to s720. Here is the interesting part. If HKEY_LOCAL_MACHINE\Comm\ConnectionSharing exists, intshrui.exe will not connect, it will briefly grey out and come back to disconnected mode. As soon as I delete the key, it will setup USB or BT PAN and wait for connection (left soft key turns to Disconnect). I don't even have to reset the unit while making change to this key. Also, I left the HKEY_LOCAL_MACHINE\Comm\ConnectionSharing as empty, and noticed as soon as I run intshrui.exe, it will populate
"PrivateInterface"=""
"PublicInterface"=""
keys under ConnectionSharing key. I also tried to change various reg keys, such as HKEY_LOCAL_MACHINE\Comm\Tcpip\Parms\IpEnableRouter to 1, and
[HKEY_LOCAL_MACHINE\System\State\Connectivity]
"InternetSharing"=dword:00000001
None helped as well.
Am I missing a file or reg key to make this work? I looked on my Dash for various keys/files but didn't see anything useful.
has anyone figure out how to get internet sharing on wm6?
Have a look at;
http://forum.xda-developers.com/showthread.php?p=1517183&posted=1#post1517183
I posted up the files and a .reg file taken from my WM6 Dopod 838, but I don't know if everything required is there. If anyone knows what else is required I'm happy to copy it from my device and post it here.
Would you mind posting ipnat.dll - it is missing from Blackjack II WM6..
Internet Sharing kavana's 080308
does anyone have a problem with Internet sharing?
Bluetooth PAN and USB sharing dosnt work for me with kavana's 080308 rom
and remade wm6.1 kavana's 080308.
Before I never had any problem with T-mobile, russian, rodger, HTC.....
skf said:
does anyone have a problem with Internet sharing?
Bluetooth PAN and USB sharing dosnt work for me with kavana's 080308 rom
and remade wm6.1 kavana's 080308.
Before I never had any problem with T-mobile, russian, rodger, HTC.....
Click to expand...
Click to collapse
I have fix this problem,and update XIP and SYS to 19202,i'll upload the new version later,just wait...
Thank you. I wait for new version .
btw With your rom I able to install and USE tomtom ,
with T-mobile Windows Mobile 6, I get incompatible with tomtom navigator arror.
http://forum.xda-developers.com/showthread.php?t=364685&highlight=tomtom
What's new in 080312:
Update to new kernel
Full English version
Fix Internet Sharing ----do not work for me ;(
6.1 Internet Sharing Problem *R.I.P.*
Has anyone figured out why Internet sharing NO LONGER works with any 6.1 roms that i flashed to? From Kavanas ROM s to Ricky's Remakes.
Is there a fix to this?
Can any of you "smarter" Gents or Ladies, look into this.
this is wierd. who is your operator? mine works just fine with the settings i use. maybe we should find out if this problem only exist for certain operators. might also have to do with the network connections on the pc. like i said in another post, i noticed a new network connection appears when you sync the phone, unlike in wm6.0. another thing is i would have problems with activesync everytime i flashed to a new rom without doing a uninstall & reinstall of activesync.
Se7eN43 said:
this is wierd. who is your operator? mine works just fine with the settings i use. maybe we should find out if this problem only exist for certain operators.
Click to expand...
Click to collapse
Shouldn't be operator issue. Worked great prior to updating to 6.1. (T-Mobile USA)
What rom are you using?
damn u were quick to respond. i edited my first post. im usin the new v15 rom. and tmobile is my operator.
ediit: i just messed with my settings and went back to how i had them before and now its not letting me do the internet share. hmm... this is not cool
Iv used V14, V8 and V5 and none of them allow my internet sharing to work. V5 worked at first but then stopped.
I really like 6.1 but I NEED that internet sharing
WHAT settings are talking of? that work for you?
INTERNET VIA USB PROBLEM SOLVED!!!!
ok i think the problem may be with activesync. like i said, in my second post edited, i had messed with the advance settings of connections menu, and reverted back and it stopped net sharin via usb. i noticed activesync gave me an error sayin somethin about not being able to fully connect but i was still able to browse my phone, also giving me a constant animation of the activesync icon, saying "connecting" never stopping when a full connection is establish. when i fixed this and the icon stopped turning and said "connected" i tried and it worked.
on a fresh install of the past couple of roms, this is what i did... (from an earlier post of mine)
this is what i did. use the "connection setup" in the accessories folder. choose country & operator. dont think it matters but i also selected "Enable Auto Configuration" under the menu.
in explorer, under "menu/tools/options/connections" Auto.Detect Settings is selected. under "Select Network" choose The Internet.
now go into ur phones "Connection" settings, select "GPRS". in my case, select, "T-Mobile WModem Link", under "Connects to", select The Internet. for other operators, guess look for somethin similar. now u should be able to share via usb.
one thing u might have to do is, delete whatever gprs settings u have now and power off and back on. then do the above.
sorry if this is so messy looking
Can you post the entry "seetings" for "T-Mobile WModem Link"
I manually entered my connections.
So i dont have the modem link
Hi!
I was able to do Remote Desktop by connecting with my tilt 2 to my local Network so I used my Desktops address (192.168.1.4) as computer name and I was able to connect with the Tilt2.
Now, I am trying to figure out how to do the same but when I am not home thus connected to my network.
I tried using my REAL IP address but it was not able to connect to it.
I am running Windows 7 Ultimate any my tilt 2 has a stock 6.5
Thanks
You'll need to set up port forwarding on your router. Looks like this site has a bunch of guides to do so. You need to set it up to forward port 3389 to your desktop address (looks like 192.168.1.4) and you should be good to go, no specific config necessary on your tp2.
Edit: As a side note for security's sake only allow non-administrator accounts to remotely connect and make sure you use strong passwords!
That worked out great...thanks mate!
Yeah thanks Toleraen! I was just now finally getting around to check out the remote desktop client on both my phones, and was looking for exactly that
Glad I could help
Pretty cool to do this indeed...any other software you consider better than this to remote in to my PC?
shaolin95 said:
Pretty cool to do this indeed...any other software you consider better than this to remote in to my PC?
Click to expand...
Click to collapse
I hear VNC get recommended a lot, but I haven't had a chance to check it out yet (I'll do that once I've tried remote desktop). I've attached the cab for it, but I can't find any threads on it's use, you'll have to dig that up yourself
I must have tried a million different settings over several hours and never was able to connect via 3G or even locally when hooked in through wifi. I used to be able to do this with my Treo 750 with little hassle. I have the port forwarding set up on my Linksys WCG200 router. I have even tried turning all firewalls and encryption off. No joy. Anyone else have a Windows XP setup with a Linksys router that has had success with a Tilt 2 stock ROM? Note: I do not have a static IP. Has anyone successfully done this with a dynamic IP?
I am doing it to Windows 7 with a dynamic IP...I just make sure I got the one for the day(week) before living home if I want to remote in from work.
I use Hamachi to create a VPN connection and then remote into my PC that way, leave hamachi running on my desktop and then just run the mobile version on my phone when I want to remote in, that way there are no open port security issues to worry about and the VPN IP address never changes.
Is it any slower or faster than Remote Desktop?
Zylograth said:
I use Hamachi to create a VPN connection and then remote into my PC that way, leave hamachi running on my desktop and then just run the mobile version on my phone when I want to remote in, that way there are no open port security issues to worry about and the VPN IP address never changes.
Click to expand...
Click to collapse
Sweet! I had no idea hamachi had a mobile client now!!
I'm trying it out as soon as I get home today!
I use "Remote Touch Server" to remotely access my computer. The main reason i use it is because it keeps your computer on while you are accessing it. I use it for a handheld monitor for powerpoint presentations. That way I can see what the computer is doing, and tap the screen to advance to the next slide
I have created a new Windows Mobile application to wake up hosts in a network or over the Internet. Your networkcard and/or PC must support AMD's Wake-On-Lan (WOL), most networkcards and PC's do support this nowadays.
Features
Use Win32 Sense SDK.
Sources files available!
Stores hostname, MAC address and port number using registry.
Wakes up a host in a local area network (LAN) or in a remote area network (WAN)
Support for all screen resolutions
Requirements
A Windows Mobile 6 Smartphone or PocketPC device with access to WAN (wifi/3G/GPRS...)
Computers in your network that support Wake-On-Lan
Change log
V1.3
Uses the latest Manila's SDK V1.3 which improve speed and landscape compatibility
Correct a bug when using WIFI
Add some informations (IP of device & resolved host)
"
Hi,
anything like it exist already.
http://forum.xda-developers.com/showthread.php?t=695524
with friendly greet
starbase64
Thank you, I hadn't seen this program before... However, there are some differences as the use of the win32 SDK and the availability of sources.
I hope someone will find the sources usefull
I really need this.. and have no idea what to do. unfortunately, i can't forward a port for a broadcast address in my LinkSys WRT160N.
anyone knows how to set this up?
Set up LinkSys
Hi,
Try to setup your router without the broadcast, sometimes it works... For example, if your PC's IP is 192.168.0.10 and your extern LinkSys's IP is 80.32.3.4, try to set up your router like this :
UDP forwarding:
in port: 12345 for example (you can use any number below 65535)
out IP: 192.168.0.10
out port: 9 (or 7 depands of your hardware)
Then in my app, the host IP will be 80.32.3.4 and the port 12345...
I hope it will be OK...
which app works best?? because there is 2 of these circling around these forums.. and i'm going to use the best one... which is more user friendly? and has the least amount of router input work?? either that... or will the op be so kind and kinda hold my hand and walk me through it via PM?? i will gladly sport your appication
The other application can save the configuration of multiple computers while mine only records one...
Also, mine is not based on dotNET so is slightly faster...
@nir36:
You could also try to use a smaller subnet/range. My router won't allow to forward a port to 192.168.0.255, but I changed the subnet mask to 255.255.255.224 and so the range is from 192.168.0.1 to 192.168.0.30 with 192.168.0.31 being the broadcast address for that range and which I can forward the needed port to.
You can use a subnet calculator if you need more or different IP addresses (do a search for subnet masks on google)
@ProjektFuze:
Least router input work ?? You have to setup your router/computer the same, the program just takes the public IP address, MAC address and port and sends a packet which is the same for both.
I would say WOL everywhere is more complete but this app here is more straightforward if you need it for only one computer...
Thanks for sharing!
Hi, great App and it suits my need perfectly! Almost...
I cant get it to work over GPRS/3G, only on Wifi!
Is that how it should work or do i have wrong settings somewhere, cant find any settings!
Thanks
/Andreas
Pain123 said:
Hi, great App and it suits my need perfectly! Almost...
I cant get it to work over GPRS/3G, only on Wifi!
Is that how it should work or do i have wrong settings somewhere, cant find any settings!
Thanks
/Andreas
Click to expand...
Click to collapse
It should work with 3G... It's probably a router problem !
When using 3g, the IP you set in my app must be a public IP (not 192.168.X.X) and if you have a router, you should tell him to route the packet to your local IP...
If you don't understand (English is not my native language), tell me more about your problem.
Hi!
It is not a router problem, my HD2 cannot even connect to internet in the program, and by an app in android it works perfectly so it is not in my router or computer... Can it by some issue with my rom?
Artemis 31,5
WM 6.5 23576.5.5.0
Manila 2.5.20183025.0
Radio 2.10.50.26
/Andreas
Strange...
When you are allready connected to internet, is the button enabled ?
I have a friend which have an HD2, I will try with his device and post here tomorow... Maybe another application prevents the connection...
I've tested my app on the HD2, and no problems...
My app should show your IP when connection is found. Try to:
-unconnect from 3G and launch wakeonwan. My app will normally trying to connect using 3G. Is this step OK?
-Connect your phone and launch wakeonwan. My app will normally trying to find your IP. Is this step OK?
No, neither works! It only say "Cant connect to internet"! It´s only on Wifi it connects... :-S
Ok, I will try to change the connection process and update it...
To understand the problem, what is the real message printed ?
Can't establish connection to web...
Can't find web connections...
Can't retrieve available connections...
Can't find your IP address...
An other question: is the app searching for a connection or the message is directly printed?
Thank's
Ok, can you try this version ?
remplace the old .exe with this version in /program files/WakeOnWan/
It´s the first one, Can't establish connection to web.
And i will try out the file you posted...
Pain123 said:
It´s the first one, Can't establish connection to web.
And i will try out the file you posted...
Click to expand...
Click to collapse
OK, I'm waiting for feedback