Develop Bugs

Can't do the hard reset on SX-56, pls help.

I had my original ROM back up to SD yesterday by performing a hard reset (hold on/off key then press the soft-reset button), then successful copy "CE + Boot to SD" to the card. But today, I can't perform the hard reset anymore. When I hold on/off key then press the soft-reset button, there is no option for me to choose, it only look like a soft reset. BTW, I did not neither change, modify or install anything since yesterday.
Anyone has any suggestion? Tks.

hhmmm never knew you could hardreset xda1's that way i believed that you needed to stick the stylus into the small hole on the otherside of the connector as in 1 hole for softreset and 1 hole for hardreset

Yes, the hard reset button on xda 1 is the tiny hole next to headset socket, push once, leave for 1 minute then push once more for fresh factory reboot. This procedure MUST be carried out after flashing phone.

I'm sorry I did call the wrong name for that procedure.
The problem is when I did successful unlock my Siemens SX 56 via ActiveSync by install the Special Edition rom 1.2, I couldn't enter the "bootloader" by hold on/off key then press the soft-reset button. Anyone pls help.

power not turning on after WM5 install.

i installed WM5 successfully and i installed 3rd party program after that
if i turn off BA that does not turn on again.
then after soft reset it working but if turn off again not working again.
anybody same problem...??

hmm, have you tried putting it back to serial mode and reinstall windows mobile 2005 or downgrading? i haven't heard of such a problem but i don't think you have much of a choice. or maybe you should try hard resetting if you forgot to after the installation, just press the on/off button in and poke the buttom for 5-7 seconds ;-). I hope this helps.

flashed dell x50v (how to fix...?)

Hi,
When performing downgrade from 2005 -> 2003se, I followed onscreen messages, but Axim is black/dead/ dunno what to do to "make him alive again" !?!?!
I searched a bit forums and found out that:
In a few seconds, you'll be prompted to do a hard reset by pressing the power and reset buttons simultaneously. Ignore this message. What you want to do is hit the power, wireless, and reset buttons again.
(http://www.downloadsquad.com/2007/08/17/how-to-downgrade-a-dell-axim-x50v-the-hard-way/)
BUT I did power/reset...
Is it possible to fix it not sending it so service?
I still have warranty by Dell, but I am not sure if they will cover that...
I used the following images for downgrade:
WM2003SE_A05_EN_X50v
with this filenames:
WM50_B_A05_X50v_WM2k3SE_EN.nb0
WM50_B_A05_X50v_WM2k3SE_EN_nb0.crc
WM50_K_A05_X50v_WM2k3SE_EN.nb0
WM50_K_A05_X50v_WM2k3SE_EN_nb0.crc
Current version running on Dell was AximX50v_WM5_A01_EN.
Thanks for any help and suggestions...
Regards

fixed it
It's working now...
After taking battery out, inserting it back... putting boot/image on sd card...
This is crucial: combination and timing
1. wifi+power button (pressed - hold them) + reset (quick press/release), in meantime hold wifi+power buttons and release them when loader menu shows!, (WM50_B_A05_X50v_WM2k3SE_EN.nb0)
2. !!!VERY IMPORTANT STEP!!!
A) device tells you to hard reset device (power + reset), DON'T do that!!!
what you need to do here is wifi+power, then quickly press reset button (less than a second) in the meantime button you need to hold buttons (wifi+power) until boot menu appears
3. choose this WM50_K_A05_X50v_WM2k3SE_EN.nb0, confirm it 2 times and wait for round 15min!
4. the result is: alive DELL with 2003se os, test this, 100% success guaranteed!!!
SUN with BIG SMILE appeared to me after DARK clouds
Cheers!
Cya

Thanks to Goldwin
A big clap for your clear and useful advice ; I was lost and you saved me.
Thank you very much .
By Geppoxy

DEAD Dell Axim X50V after upgrate

After trying to upgrade my Dell, it no longer will turn on. Please tell that I really do not have that so called "300 dollar paper weight". Is there anything that can be done.

Ok, I have upgraded the rom on a HImalaya device (NOT an Axim) several times, and with those devices, after you upgrade the rom you need to do a SPECIFIC hard reset.
Pressing the normal power button or other buttons to wake it up doesn't work.
On our device it involves holding down the reset button, camera and record (it will be different on yours).
This takes us to a screen where we need to change three settings (such as cleaning the registry hives) before the device starts up.
You need to figure out what the specific reset combination is for your phone (generally it isn't the same as the hard reset you would usually use ETC on a Himalaya device the normal hard reset is reset plus power, but the reset after bootloader is reset, camera and record).
Hope this helps.

Thank you for you help. I got it working.

would you share how you did this?

Hard Reset for X50 is Hold Power Button and Push Reset Button

pls help!!!!wm6 hard reset

hello i have wm6 on my ba and i wanna give hard reset!!! i don't know how! please help!!!!

Have a look here:
- http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel
- http://wiki.xda-developers.com/index.php?pagename=BlueAngel_For_Beginners
And next time try this one: http://forum.xda-developers.com/search.php
Greets Rossi

pls help~~~
where? i have ba whit wm6!!! i try all of them for there, not working! there is for ba whit wm5 or wm2003! for wm6 nothing!

helppp!!
on/off + reset button at the same time... not work!
recor+ on\off+reset =serial message on the screen ( i think that is bootloader)
anything alse i need! please helppp!!!

I can't hard reset either
I have followed all of the directions on the wiki, I have even tried to install another rom and it still will not remove all of the data, it changed the information in the about section of my settings but that's it. I want to change ROMs but it is not working. any ideas?

What version of windows is on your PC?
also try the enter BL which is on most ROMs

Hard Reset
To hard reset you do a soft reset (power + reset)
and before it shows the version numbers at the bottom you have to press Record + Camera & also power (i think) and then you come to an options screen using the record button to go down the list and camera to select you select Yes for option 2 and 3 and then hit the mail button to apply.

jidi22 said:
hello i have wm6 on my ba and i wanna give hard reset!!! i don't know how! please help!!!!
Click to expand...
Click to collapse
swick off button & rest buton in the same time but take care if is not the original windows you may have problems
Warm Boot: Reset the unit by pressing reset button.
Cold Boot: Press Power ++ Reset the unit simultaneously.

Read this. It's how to hard reset your BA. Hope it helps. Make sure you already formated the storage.
Code:
http://wiki.xda-developers.com/index...izzardUpgrade4