O2 XDA Orbit and Copilot Live 7 - P3300, MDA Compact III General

Hi All,
I just purchased an o2 XDA Orbit with the free Copilot software. I installed it from the mini sd card and all seemed ok. I entered the product key and activation code which all went well.
Then I proceeded to setup the options but under 'Set Language' there is not language to choose and no voice either. I tap 'Next' anyway and choose Mile as my 'Map Units', tap next and I cannot get pasted the warning screen that mentions 'exercising caution whilst using the product'. I have re-installed and searched the Internet all day and cannot find anything. I'm bored and tired.
Does any have a solution or experienced this problem? I guesing it's something to the with paths pointing to the wrong location but I'm not sure.
Regards,
Aston

Never used my free CPL software just got Tomtom straight away.
Try reinstalling it maybe ? there are 3 CDs with it so do you have to add the voices via a cable PC connection ?

the screen exerciseing caution is a us requirement so is put in all versions you should be able to tap an ok or next button an then you should be able us the application

Hello,
I have recently installed CPL7 with no problems having uninstalled CPL6, this ran with no problems aswell. I have a 2GB Micro SD card, so I copied all the folders/files from the install card directly to the 2GB card, then once inserted into the phone, the phone found the install and installed CPL7. All the folders/files from the install card remain on the card now. Did you install from the card then remove the card(don't know if this is important or not)?
HTH

Related

BA native Notes utility will not save new notes

Hi!
I noticed this problem just today when I was trying to write a new note on my pda2k...I got the app open ok, jotted down the info that I wanted in the note and then when I hit OK in the top right hand corner, nothing happened! I had to hit the red/end call button to get out of the app....when I went back in, it opened to the same note.It wont save it for some reason....
now I have recently installed PocketBreeze 5.0 (the trial version) and have the O2Plus utility - everything is working fine except this!!!! I can access my old notes fine and I save them to my storage card.....
another note: my stupid pda mount fell yesterday while my pda2k was in it....everything is fine and I have checked the programs on my storage card too and they work ok too??
any ideas anyone???? I need my notes since I write loads of them......
Thanks for any help!
Kaz.
EDIT: it will save notes to my main memory but not to my storage or the storage card.
bump
anyone know

TomTom 5 Maps Install problems

Hi
Please help me before i go completely mad. I cannot get those pesky maps to install. I am installing from the original tomtom 5 cds in the Software + maps of western Europe version. The main software and UK jane voice all install Ok. But when i insert the second cd and select any of the UK maps option the install programjust disapears. I tried doing a Hard reset on my Universal and starting again. Still get nothing. When i run the TT sw it says "no maps found".
Then i stumbled accross this thread read it through and see that there are many more hurdles needed after i get the maps but found a few usefull threads on maps so. I did another hard reset and tried the suggestion of copying the Cab files direct to my SD card and running from there this time I get the message "Installation of Great_Britain_Plus was unscessful" I have tried this on 2 different SD cards a 1 gb and a 4gb both with plenty of space.
I would be really greatful for a step by step guide or a pointer to the correct thread on this or any other site. I am even happy to pay someone who lives in London to install for me. I am going away on a driving holliday in the UK next week and was hoping to use GPS for the trip but am feeling a bit dissapointed about it now.
Many thanks for any helpfull suggestions
Regards
Try putting the SD card in a reader and install the new map to the card reader (you get the location - where to install option during the install process) instead of on the PDA through active sync. Then simply open Tomtom and go to options and select change map and select from the one/s that you have installed through the card reader.
Hope this makes sense, and possible helps
put the maps into your root of storage card , remeber to keep the orginal names of foldesr. it looks like this in my case..
\storage card\great_britain-map.v5.66
you also have CurrentMap.dat file put in the TomTom folder in My Documents and creat empty TomTom folder in storage card. voices should be put it Voices folder of the storage card .
cheers, cudo
hope it helps ..
get the lastest update from the tomtom website for the universal otherwise youll have trouble getting it to work the isnt set to write protect is it
TomTom 5 latest version is 5.21. That said, the map installation software is horrible.
The only way to install the maps is to specify to a memory card. Do not use the install to Pocket PC or Folder. Select Other and use a memory card.
It goes very slowly ... so have some patience, get some coffee/tea/snacks while you do this.
I can't believe that this is a commercial software. It just not workable in this manner.

TomTom6 keeps losing maps

Hi,
Every so often TomTom on my orbit loses sight of the maps I have on my storage card. I can't see any reason for this and have to recover from a phone backup . Once the internal memeory of the phone is recovered the maps are then visible.
Any ideas on what may be getting corrupt?
Cheers,
Neil
No answers but join the club and email HTC Tech Support.
http://forum.xda-developers.com/showthread.php?t=285511
HTC P3300 loosing TomTom Maps
Me too. Italian OS. Once I even had to reactivate the map, after the restore. Last time that I launched TomTom receiving a msg of the type "Cannot find maps..." I just made the PDA restart with a soft IPL. Will you believe? At the restart TomTom didn't complain for any map missing.
Maybe it's a matter of low available memory when TomTom cannot locate maps.
Hope this might help you. Let us see, if anyone else is posting his experience.
Thanks for your comments.
Once TomTom loses it's maps, a soft rest wont allow it to see them, I just keep on getting the message and the opportunity to download a free one from the website.
I did a bit of playing around last night and can confirm that a hard reset then allows TomTom (installed on the Storage Card) to see the maps (I don't need to reinstall, just run the exe file) so it looks to me as if its something getting corrupt in the standard internal memory of the phone and that this is causing the loss of maps.
Neil
This is an SD card corruption issue. Email HTC to lobby for a fix. See the relevant thead.
I don't see that it's storage card corruption. If you read my last post you would see that the SC was left alone when a hard reset was performed. The hard reset would only affect the internal memory and that cleared the issue.
I think something is getting corrupted in the internal memory and not letting TomTom find the path to its maps. Maybe something is messing up a registry entry?
believe me. I have had this problem over 10 times in the last month. When the tomtom maps go missing, the map folder is usually empty. This can normally be rectified by softg-reseting the device which uses the backup FAT for the SD card (so I've read in the relevant thread) and restores the missing files. However, if the device attempts to write to the card again, after corruption (which TT does on application exit) then the card will be permenantly corrupted.
w0mbat said:
I don't see that it's storage card corruption. If you read my last post you would see that the SC was left alone when a hard reset was performed. The hard reset would only affect the internal memory and that cleared the issue.
I think something is getting corrupted in the internal memory and not letting TomTom find the path to its maps. Maybe something is messing up a registry entry?
Click to expand...
Click to collapse
During a reset (hard or soft) WM5 will do a version of scandisk on any storage devices connected (Micro SD) which will try to fix FAT errors. So a reset does effect the SD card and can repair it.
OK RicardoC & debully, thanks for your advice.
I have already emailed HTC tech support a while ago. You know, I still think Resco file explorer may be the common link to my SD card woes..... I'll have to wait and see.
Cheers
Bluetooth possibly
Hiya,
I had this problem and it seemed to be linked to the bluetooth explorer setting a new storage card (virtual), if you get this problem go into settings and turn off bluetooth explorer and check what storage options are available from the memory settings, the bluetooth storage should have disappeared. Once I'd done this tomtom could find the maps again.
Hope this helps.... and you don't actually have SD problems....
jinx1uk said:
Hiya,
I had this problem and it seemed to be linked to the bluetooth explorer setting a new storage card (virtual), if you get this problem go into settings and turn off bluetooth explorer and check what storage options are available from the memory settings, the bluetooth storage should have disappeared. Once I'd done this tomtom could find the maps again.
Hope this helps.... and you don't actually have SD problems....
Click to expand...
Click to collapse
thank you!
i have tryed that and it seems to do the bussiness
This also happens if you have Bluetooth Explorer activated in your Bluetooth settings.
TT6 losing maps, you are not alone.
I know this doesn't excatly help, but I don't think that this is unique to the artemis.
I have the same problem with TT6 on my himalya (XDAii). It seems to be linked to either phone S/W or BT stack as I have had it happen to me several times after I have made or received a call. My workaround is to remove and reinsert the SD.
Has any one checked if other handheld PC users have similar probs (HP?) with TT6?
I have used TT6 with no problems on X51v.
Only had the problem on the Orbit when the Bluetooth Explorer was activated.
Hi,
I had the same problem on my Orbit, never experienced the SD corruption though. I eventually solved the Map problem by following the instructions, not sure where I got them from, perhaps somewhere on this site.
The instructions stated the following:
1) create an empty file on your PC and name it 'autorun.exe'
2) create a directory named '2577' at the same level as your maps.
3) copy the empty autorun.exe file to the 2577 directory
this did the trick for me
Removed the Bluetooth explorer from the Bluetooth installing settings from the Comm manager and hey presto, maps are back.
Rock and Roll.

Artemis (XDa) TOM TOM Installlation

Hi all
I hope someone can help me with this I'm using an XDa Artemis and I have TT6. I have previusly copied files from the TT6 SD card direct to my storage card on my device and the system picked up the necessary installation files and sorted it from there.
However every now and then when I started TT6 on the device, it would fail to recognise the location of the maps though the software appeared to be working ok. The resolution to this was to re-set the device and wait for it to reload the software. (a bit of a pain but...)
Just lately the device and or TT have failed to start properly no matter what I do. I have tried re-installing the files, I have removed the TT software from the XDa using add remove progs.
I can not now get the Xda to recognise the newly copied files to a newly purchased staorage card irrespective of whether I install to the device direct or to the storage card when installed in the comuter.
My TT home software does not recognise my device and I'm stumped...
Any advice welcome, particularly in relation to getting the TT Home software to recognise my device and allow me to install the software direct from the C rather thn thru the above methods would be great.
Thanks
Pete
check you setting for the GPS Port in the TT& software. the baudrate should be set on standard 4800 and the com port ist Nr. 4 (usually the one at the top. if it still doesn't run, then try hard-reset your pda and also formatting the sd card and start reinstalling the whole TT6 package
Thx for that, yes it's all ok and I had already done all of that except hard reset. (trying to avoid that as I dont want to spend days re-installing all my other apps).
What I've done is purchase a new card, copy the TT^ data across to it and that seems to have worked (fingers crossed). Since doing this my device has only once failed to recognise TT6 so I'm hopeful....
Cheers
Pete

[Q] TomTom Navigator 7

I have a new copy of TomTom Navigator 7 and want to use it on my HTC HD Mini. It was supplied on a 4GB card but as I've got a 16GB card installed in the phone I've copied the contents over.
Originally I fitted the memory card they sent me into the phone but it kept reporting that this version was not compatible with this phone.
How did others manage to get this working on the HD mini...
Roy_s
If you use "search feature", you'll find a lot of post about Tomtom...
The official version is not compatible with HDmini, you have to look for another software version, modified...
Thanks for the reply, I did read some of the other posts but thought that they had managed to get the new version to work. I've used an older version (WM5) on an older HTC phone for a few years. The HD mini being the newer 6.5 you'd have thought it would work and still be compatible........
Roy_s
Like you , i've been disappointed to notice that Tomtom is unable to sell a correct version for a new mobile like HDmini while you can find one easily on the net .
I have asked them about this without correct answer at that moment !
I did the same, they can't even say when it will be tested or even if it is on the list to be tested with this phone.
I've since found the file ttn7.917.9186_vga_black.cab and will try running that to see if it then allows me to run the installation.
Roy_S said:
I did the same, they can't even say when it will be tested or even if it is on the list to be tested with this phone.
I've since found the file ttn7.917.9186_vga_black.cab and will try running that to see if it then allows me to run the installation.
Click to expand...
Click to collapse
If im right, im still using this version succesfully:
TTN_7.916.9192_QVGA_black_fixed_BT
You need the QVGA version with the Bluetooth fix, or else you will get errors.
Yes did see a post about TTN_7.916.9192_QVGA_black_fixed_BT but someone reported the GPS lagged. Have tried to search for that file but can't find a site that allows me to download it.
Still need to confirm the installation steps, do I run the cab first then install Navigator 7 or are there other files that I need to copy over..?
No problem, I have purchased the latest Navigator 7 from TomTom, just need help from everyone to get their software working.....
Roy_S said:
Yes did see a post about TTN_7.916.9192_QVGA_black_fixed_BT but someone reported the GPS lagged. Have tried to search for that file but can't find a site that allows me to download it.
Still need to confirm the installation steps, do I run the cab first then install Navigator 7 or are there other files that I need to copy over..?
Click to expand...
Click to collapse
The cab is Navigator 7 (TTN=TomTom Navigator). I can't imagine you can't find the file after a thorough google search...
Yes, there is some GPS lag. This can be solved by installing GPSmod driver:
http://forum.xda-developers.com/showthread.php?t=571266
Tomtom7 working perfectly in hd mini.
Hello, is more 'than a year I use tomtom 7 - although I prefer (IGOPRIMO1.2) per hour with only ris.480X272 - TTS, but much more detailed than the TomTom. I'm leaving screenshot .... screenshot4 in particular. Here's the data that I use TOMTOM WORKING PERFECTLY! Else can not .........
P.S. my vers. not to install but copy / paste to SD card. Start navigator.exe.
The only copy is on a Dutch share site that you need to be a member to download, tried a number of variations of the name but nothing labelled as BT fix.
So I tried ttn7.917.9186_vga_black.cab which I loaded to the phone memory. It found my map on the memory card and it asks for the activation code but then returns message saying its not valid..?
It's a legal map (Western_Europe_1GB) & code I purchased so should not be a problem.
Maybe I should delete all of the files that TomTom sent me on the SD card and just put the map on there in case their Navigator 7 files are causing the problem.
In fact .... I tried that (cab) you say ..... but does not work. You have to find a zip file, where there is only one folder. you just have to (COPY IN SD CARD) exe = navigator.exe. no installation on device! Then you have to validate your map.
p.s.To run you must first validate the MAP. by the code of your device you need the code for tomtom. the code of the device (it IDENTIFYING YOUR PHONE) is one that I deleted on screenshot4.
oregon69 said:
In fact .... I tried that (cab) you say ..... but does not work. You have to find a zip file, where there is only one folder. you just have to (COPY IN SD CARD) exe = navigator.exe. no installation on device! Then you have to validate your map.
p.s.To run you must first validate the MAP. by the code of your device you need the code for tomtom. the code of the device (it IDENTIFYING YOUR PHONE) is one that I deleted on screenshot4.
Click to expand...
Click to collapse
Thanks for the reply, I'm not sure I understand fully.
The cab I have loaded (ttn7.917.9186_vga_black.cab) you say does not work, which one did you use & where can I get it?
I can't find any file called navigator.exe either in the phone or on the memory card or the SD card that TomTom sent me.
Hello. You can not tell you more, because it violates copyright laws ......
I try to make you understand:
1. tomtom program:
time ago I tried (ttn7.917.9186_vga_black.cab) but I had problems .... then turning the net I found a file.zip. Inside a folder (Navigator). if you find that you just file.zip estract in sd card root. start *. exe. The version that I use are in screenshot4.
2 then you have to unlock the MAP,
ie have the license (serial number that you derive from your serial device). Your serial device appears when you start tomtom for the first time. (registration map).
I hope you understand.
Thanks for the reply, my version is a purchased copy from TomTom so I'm not violating anything I'm just trying to get it to work. The steps I've done so far are:-
Loaded TomTom 7.916.9192 QVGA black bt.cab
> Bttrayce error reported at boot up, deleted files BtCoreIf.dll & BtSdkCE30.dll, rebooted phone
> No error message
> Run Navigator, "Western_Europe_1GB map has not been activated" message
> Entered code from TomTom, message to say "Activating"
> Error "Activation failed. Sorry this is not a valid map activation code for Western_Europe_1GB"
The map is valid, it was supplied on a memory card with the activation code by TomTom, I have only copied the map to the memory card in the phone, none of the other files on the card supplied by TomTom.
I seem to have got over the Navigator installation problem but can't get the map to activate...? Its like this cab is not compatible with the latest map I have.
I have got TomTom v7 working on the HD mini.
As this was a purchased copy I contacted TomTom support and they manually activated the map, I loaded their activation file and all working.
I have noticed a little lag, not by much, but if I compare to an older phone running TomTom my new version seems to be 10 to 20 meters behind....?
Is this the GPS lag that others have pointed out, is there a latest patch to correct this...?
Not tried the home application yet either.
Roy_S said:
I have got TomTom v7 working on the HD mini.
As this was a purchased copy I contacted TomTom support and they manually activated the map, I loaded their activation file and all working.
I have noticed a little lag, not by much, but if I compare to an older phone running TomTom my new version seems to be 10 to 20 meters behind....?
Is this the GPS lag that others have pointed out, is there a latest patch to correct this...?
Not tried the home application yet either.
Click to expand...
Click to collapse
Read my post 9 in this thread, GPSmod driver should fix it.

Categories

Resources