Radio fix needed. - 8525, TyTN, MDA Vario II, JasJam ROM Development

I've had a Herm200 and a Herm100 both of which have had radio problems one just wouldn't hold a radio at all. It powers up with a No GSM error. I've tried every fix I could find and finally gave up and just use it as a PDA. Now I have a 8525 which instead of the No GSM. I get R. NONE G. NONE on boot. If I reflash it to a OEM rom it will bring back the radio but its unstable. On a soft reset it comes and goes. So installing any app that requires a reboot is risky because I dont know if im gonna have a radio after reboot. Has anyone ran into this before and if soo does anyone now a fix.
Thank You C Brown

Related

Don't start

Hi all.
First sorry for my english.
I tell us the problem. I have this device and don't start. Stop in the screen with tree colors bands and doesn't start. I see that the tree letters r, and the others i no remenber is in 0, less the last letter that has version.
This device was an user of my work. He tell me that he wants upgrade rom.
I want to restore it with imate original rom, but i cann't.
I see that activesync no detect pda and i can't execute the original rom.
Please help me.
Are you sure this is a Blue Angel?
As far as I know, and I could definatly be wrong, the BA doesn't have a triband colored boot screen. It is just white.
Yes is a blue-angel (imate pda2k). The user try to a cocked rom and it was a blue,green,red,and white bands with this parameters r 1.15.00 g 1337.45 d 5.04.06.wwe
I try a hardt reset and doesn't start and connect an activesyns is imposible.
Any idea?
Thanks in advance.
Odd...
Well the triband color screen is the boot loader.
You may just want to try downloading the iMate PDA2k ROM and plug your phone in, then try to run the update tool.
It may give you a error, if thats the case you will need to use a different tool to get it to work, but at this point just try to do the rom update... if you get an error let us know.
If you don't get an error or if it doesn't work this one is beyond me.
sounds like a ROM upgrade gone wrong.
reflash the phone again. see WIKI for instructions.
I try to reflash with original imate rom, but activesync don't detect the device. I try with mtty and other to connect via com3 port, but it's imposible.
Thanks
I start the device in bootloader mode and i start a reflash with original rom, but when the extended rom proccess is starting to 3% i have and error.
The imate program tells me that i restar the device, but i cann't enter to flash.
I'm loss, any else idea?
reflash
Waht about reflash back to wm2005 (via helmis rom for instance).
If it works, it works (i like 2005's better BT support for my headset, no cracks).
If you then still want 2 downgrade, use wiki wm2005 downgrade instructions and carefully downgrade to your chosen rom.
i downgrade and runssssssssss
Thanks a lot.
brh same problem here waht did u make to make pda2k work it's stop here 3% too مستنى ردك

Help me... upgraded but now stuck at operator splash

Hi, I seem to have bricked my Universal. Apologies, I did search the forum & wiki etc., I wouldn't say I'm an expert but I've upgraded/downgraded ROM & radio many times before
First I tried to flash with the rDosti, otherwise known as Tomal's - v7.7: WM6.1 Pro
The flashing process went OK, but then after I hard reset the operator splash screen comes up - the T-Mobile screen - and the version is listed as 2. THING xx, like it should. However, my device remains frozen at this screen.
I hadn't upgraded to Bootloader 1.01, it was 1.00 like the documentation in the thread said, so I did this and reflashed again, same thing.
Then I tried flashing with the T-Mobile official WM5 in desperation - the same thing happens, the text on the splash says it's WM5 but it freezes here.
Then I reflashed the bootloader and WM6 several times again with the same results.
Can anybody help me with this pretty please? Thanks for any help!
try original1.....search in de forum.....
diji1 said:
Hi, I seem to have bricked my Universal. Apologies, I did search the forum & wiki etc., I wouldn't say I'm an expert but I've upgraded/downgraded ROM & radio many times before
First I tried to flash with the rDosti, otherwise known as Tomal's - v7.7: WM6.1 Pro
The flashing process went OK, but then after I hard reset the operator splash screen comes up - the T-Mobile screen - and the version is listed as 2. THING xx, like it should. However, my device remains frozen at this screen.
I hadn't upgraded to Bootloader 1.01, it was 1.00 like the documentation in the thread said, so I did this and reflashed again, same thing.
Then I tried flashing with the T-Mobile official WM5 in desperation - the same thing happens, the text on the splash says it's WM5 but it freezes here.
Then I reflashed the bootloader and WM6 several times again with the same results.
Can anybody help me with this pretty please? Thanks for any help!
Click to expand...
Click to collapse
2days ago i got this problem .but now i recover my divice with '' mtty for remove all botloder imege . then updat with new rom.
first u have to know is ur divice G3/G4. then u flash with rom file
Hi, thnx for replies, but im afraid you misunderstood me somewhat.
The *upgrade* process appears to work, ie. Bootloader seems to work fine, the device freezes at the first *operator* screen*, where it shows OS & radio version - the t-mobile screen, NOT the bootloader.
I tried the "Exit_bootloader" app (=mtty?) with no success.
An
do 1thin u update another rom...make sure dat ur fone is g3/g4..then update. coz if u update the wrong rom dis wl happen...
Thanx. I own 3 universal & I upgraded another with the same ROM & it worked no probs. So problem is not with the ROM.
The device with the freeze is G3.
mamaich method
Step by Step :
get the tools at attachment , as mamaich told, you have to use it in bootloader mode , (Power + Light Bulb + Reset)
1. Stop Activesync USB connection
2. Uni : Reboot Bootloader then Connect USB
3. PC : Run mtty1.42.exe
4. Choose USB in "Port" (Reconnect if can't find/reconglize USB and try remove sim and sd card)
5. type : task 28 55aa
6. Press Enter
7. Cause DOC reformatted, so there's no rom in DOC ,try reflash any rom that you like .
For task 28 55aa in mtty success , will show the message (attachment )
DONE .
Thanks satanisme.
I had the same problem, I have had a good look around but yours is the best description of how to get out of the splash screen.
regards
Gingerchristopher the biodesel king.
Thanks satanisme.
I had the same problem, I have had a good look around but yours is the best description of how to get out of the splash screen.
regards
Gingerchristopher the biodeisel king.

on the startup G NONE R NONE--can anyone help me to fix it?

hi all,
i have a problem with my hermes (cingular 8525) herm 100.
when i start up, i got, on the red lines, all the values except R NONE and G NONE.
the OS start up with no problem but no signal.
i tryied to load new radio with memory card but it stops around 20% and stay there still.
no problems to load a new ROM.
what can i do with it??
please someone help me!
it sounds like you screwed it up by flashing it wrongly , put it in bootloader mode and try flashing the carrier rom you had originally for your device.
thank you for your answer...
but i have to go back with the spl as well?? can you, PLEASE, explain me how to do it??
i am not that good in it!!
mickscores said:
thank you for your answer...
but i have to go back with the spl as well?? can you, PLEASE, explain me how to do it??
i am not that good in it!!
Click to expand...
Click to collapse
if its hard spl i believe its perminant. if you re-flash the carrier rom it'll reset the os and radio back to stock settings so you can start again. id try that before looking into anything else
what does makes me think is about the red line at the start up gives me NONE and not NO GSM...it's a bit different from the other kind of brick.
i will try to put again the original setting by ATT and i will let you know..
cross the fingers for me!
I download the file and I try 2 different methods:
1 - upgrade via Pc thru acrive sync, it get's stucked on 12% and then ERRON
2 - upgrade via SD, it get's stucked at the same percentage when is suppose to write GSM
suggestion : shoud I try to program without radio?

Big Problem cant update any rom

Hello,
afther an update on my p3600 with an error.
I have only the bootscreen of the rom.
I cant flash any new rom , every time i have connection errors.
is there any chance to correkt the problem or to delet the phone completly?
A Hardreset doesn´t bring anything.
Please help me i cant do anything with my p3600.
take a look:
http://forum.xda-developers.com/showthread.php?t=572747
i read the thread,
but i have tested to update the hard spl but it doesn´t work.
The update software always told me that there is an connection error.
But when i want to install the rom 6.1 manila 2g the software found an connection and start to update but when the software is at 1% the update software told me that the rom is corrupt
This is the reason you should always install HardSPL BEFORE you start flashing any roms at all.
Once you have bricked it, then it is too late to put HardSPL on there.
The whole point of HardSPL is to ensure that you will always be able to get a connection to the device even if you have a broken rom on there.
If the phone is bricked, with no HardSPL on there, your only remaining option would be to try using an unbricking exploit procedure like this:
HTC Trinity Stack Overflow exploit - how to unbrick any Trinity stuck in bootloader!!
^^^ Sorry I have never had to do this myself and have no experience or advice on how to use that exploit utility ... hopefully there is enough help in that thread to get you going again.
Good luck.
EDIT: I thought I'd better just check you do realise that you can get the Tri-colour SPL screen up manually by holding down POWER + CAMERA buttons and 1sec press of STYLUS RESET button. Quickly reading through that splxploit thread I was disturbed to see just how many people didn't even know who to do that
Maybe it's just my paranoia from owning an "i" model but I have never done a single rom flash without first using that 3 button trick to get into SPL screen.
praefke1986 said:
...But when i want to install the rom 6.1 manila 2g the software found an connection and start to update but when the software is at 1% the update software told me that the rom is corrupt
Click to expand...
Click to collapse
Try flashing the Stock ROM that came with your phone. It may get you going again. Can be downloaded from the HTC website.

HELP!!!

i flashed nfsfans rom, everything went fine but when it restarted it just stays on the verizon bootscreen and wont let me do anything i think its bricked but im not really sure please help me ive tried soft resseting and removing the battery it still does the same thing i dnt know what to do
i had the same problem.. somebody said there was a fix i didnt find it, the problem was probably missing a step in using the unlocker, it asks you to unplug and replug the phone so it can close activesync, i didnt do it and ended up where you are.
i got annoyed after trying to find a fix for an hour or 2 and called verizon because i didnt buy insurance for it, luckily i was still in my year warrant the vogue comes with and they sent me a new 1, i just had to send them my broken one back
its not really bricked i dont think, but verizon couldnt get it to reset from their side so it's considered that way
ya but is obviously no under warrenty any more so what can I do to fix it????
bradsinram said:
i flashed nfsfans rom, everything went fine but when it restarted it just stays on the verizon bootscreen and wont let me do anything i think its bricked but im not really sure please help me ive tried soft resseting and removing the battery it still does the same thing i dnt know what to do
Click to expand...
Click to collapse
Give us a little more info
what does the SPL in bootloader show?
what radio is showing on the 1st splash screen?
If all else fails place into bootloader and flash a shipped ROM and start over.
yeah. whitey is correct.
what bootloader did you use?
you probably used .41 or .40 unlcoker instead of 2.31.
im kind of a noob how do i find the stuff??
uhh. just go to bootloader mode (quad color screen with seriel when not plugged in and usb when plugged in via usb)
(power+camera+reset hole) then tell us what you see.
just type all of the info on the screen.
alright it says
vogu100
spl-0.36.0000
cpld-3
hmm. i would recommend you downgraded your rom+radio with a nongps rom because you used a nongps unlocker.
use a tnz one
ftp://up.ppcgeeks.com/Vogue/Users/Im...RUU_signed.rar
and then update the radio using 3.42.5 or 3.42.3
-sorry can't find link to exact radio update, but you should update via sd card-
then load stock rom
then unlock with 2.31 unlocker (cokeman's)
then flash custom rom
i installed nfsfANS ROM but i only get date when i make a call it says something about athintcation
is this when you only make a call?
if so. then you call your carrier.
(for verizon its *228)
and press option 1.
idk about sprint, bell, altell. but you need to authorize your phone to make phone calls, receive sms, and use data. in order to use data/send-receive pix messages, you need to use a cab. avalaible here.
http://forum.ppcgeeks.com/showthread.php?t=88519
it is in the first post, towards the bottom.

Categories

Resources