Hi all.
First sorry for my english.
I tell us the problem. I have this device and don't start. Stop in the screen with tree colors bands and doesn't start. I see that the tree letters r, and the others i no remenber is in 0, less the last letter that has version.
This device was an user of my work. He tell me that he wants upgrade rom.
I want to restore it with imate original rom, but i cann't.
I see that activesync no detect pda and i can't execute the original rom.
Please help me.
Are you sure this is a Blue Angel?
As far as I know, and I could definatly be wrong, the BA doesn't have a triband colored boot screen. It is just white.
Yes is a blue-angel (imate pda2k). The user try to a cocked rom and it was a blue,green,red,and white bands with this parameters r 1.15.00 g 1337.45 d 5.04.06.wwe
I try a hardt reset and doesn't start and connect an activesyns is imposible.
Any idea?
Thanks in advance.
Odd...
Well the triband color screen is the boot loader.
You may just want to try downloading the iMate PDA2k ROM and plug your phone in, then try to run the update tool.
It may give you a error, if thats the case you will need to use a different tool to get it to work, but at this point just try to do the rom update... if you get an error let us know.
If you don't get an error or if it doesn't work this one is beyond me.
sounds like a ROM upgrade gone wrong.
reflash the phone again. see WIKI for instructions.
I try to reflash with original imate rom, but activesync don't detect the device. I try with mtty and other to connect via com3 port, but it's imposible.
Thanks
I start the device in bootloader mode and i start a reflash with original rom, but when the extended rom proccess is starting to 3% i have and error.
The imate program tells me that i restar the device, but i cann't enter to flash.
I'm loss, any else idea?
reflash
Waht about reflash back to wm2005 (via helmis rom for instance).
If it works, it works (i like 2005's better BT support for my headset, no cracks).
If you then still want 2 downgrade, use wiki wm2005 downgrade instructions and carefully downgrade to your chosen rom.
i downgrade and runssssssssss
Thanks a lot.
brh same problem here waht did u make to make pda2k work it's stop here 3% too مستنى ردك
Related
I follow instruction in http://forum.xda-developers.com/showthread.php?t=313486 but after hardreset.
My p800w is stuck in T-Mobile logo and version number. It can't continue booting up to windows mobile.
Question: How to flash ROM without ActiveSync?
How to recovery my Artemis?
Welcome any advice,
Thanks in advance.
Yea me to, mine is now a brick after that upgrade? No active sync connection possible and all I get now is the blue O2 start screen after the hard reset with the red writing and numbers in the top left hand corner..
Phone is an UK XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
HELP!!!!!!!
yeah, I had the same problem and have created a thread for it already. unfortunately I got no useful replies, and it seems that I am stuck waiting for an official o2 ROM so that I can recover my Orbit.
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
motomob said:
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
Click to expand...
Click to collapse
I read in here that you hold the voice button and soft reset.
Decaf said:
I read in here that you hold the voice button and soft reset.
Click to expand...
Click to collapse
Correct and use mtty
Already see in the forum ....
Thanks guys and apologies for the spelling..I ran the Artemis_USPL before I tried upgrading to WM6 and again have been able to run it after with my new brick now with the phone in bootloader mode but still when I try and run the german ROM update a) it will only work with the german file which freezes @ 3%? This seems to be a known problem reading around and b )when I replace it with the smaller ROM file, 54MB the german one is 66MB, I originally tried to use it doesn't read the ROM file or the update utility doesn't want to read it. I reckon I might be able to get it back if I can get one of the ROM update utilities to read a good ROm file and send it to the phone.
I can;t find this MTTY program to sniff the USB port and return the code of if the USPL util wokred as I think that could be key to all of this.
Can anyone post a quick how to here for
1) install MTTY from somewhere
2) what command to run agaist the phoen to see if the USPL util worked and what values I should be looking for
3) another WM6 ROM version (that the update utils can read) download location I can download from to try and send to the phone using the German update util
Not asking for much am I but I desperately need my phone back WM5 or 6 in the next day or so so really can't send it off.
Thanks
Error message I recive at the 3% stage when using the German ROM and english update util.
use the file attach and read that :
http://forum.xda-developers.com/showthread.php?t=285112
Thanks but I'm not that cleud up on what commands I'm meant to be sending. It works in Bootloader mode I ge a response from the phone by send it a command. But even if I get a response telling me what the CID status is its not much help as I think ti shoudl have tekane BEBEs ROM by now as I've got the german ROMUpdateUtility sending that 54,272KB file to the phone but it stops after 3%. What are my options?
motomob said:
But even if I get a response telling me what the CID status is its not much help as I think
Click to expand...
Click to collapse
That's right. On older models MTTY was quite useful, but not on the Artemis. You cannot use it to read the CID status anyway. If you are not sure about the status, run the USPL tool, just to make sure.
I've already re run the USPL ROMUpdateUtility and it completes 100% okay in bootloader mode. But after I hard reset and then try and flash the WM6 BEBE ROM or any ROM German etc back onto it it either fails with the error code I posted up earlier or gets to 3% and fails.
What are my options at this stage? Does anyone have a link to another ROM I can try like the original WM5 O2 ROM or any other WM6 ROm that might work. I'm willing to give them all a try as it's just a useless phone right now and I haven;t sent it off as 1) I need it before the weekend and 2) As I can flash some ROMs with the USPL and others have done this no problem I really feel there must be a solution as I can still falsh the phone.
What can I say RTFM... I did it all right and I didn't have a brick, I missed out one small detail... loading on the ROM with the extended ROM. All now running and it does seem a little faster than WM5.
Thank you to all those that tried to help out. To the others that are still having probs.. Don't try and run the update in the middle of a busy day in the office whilst trying to manage 100 other things meaning you are probably missing out a line like me...
One question though how do I get back my O2 power and storage meters on the today screen back as I liked them and the WiFi seems to have a bug where when it is enabled and you click on the WiFi symbol up the top it only allows you to switch it on, when it is already on.. so you have to open up the COMM manager to switch it off.
So how did you fix it exactly? I have read this thread thoroughly and can't find out what you did!
ERROR[206] occurs while trying to update ROM to WM6
While tring to update ROM to WM6 on O2 XDA Orbit i encounter ERROR[206].
I wanted to attach the screen shot but dont know how to do that, but anyway what i am doing is i attached my pda to my pc via activesync using supplied usb cord. Everything goes well till i reach a screen where it says "You are now ready to update your ROM image...." and once i click next a progress bar apperas and my pda shuts and activesync exit's automatically and my pda tries to restart with RBG band and some text:RUU, IPL 1.25.0001, SPL 1.25.0000 and USB. And thats it after few seconds or a min i get the ERROR[206] and my pda hangs.
I dont know why Activesysn shutsdown ???
Just an additional in i want to tell that without installing activesync i am not able to connect/pair my pda with my pc. So do i need to install the drivers and then try or it doen't matter cause once i install Active sync i can connect the device.
Please help me with this....
Thanks
unable to load bootloader!!!!!!!!!!!!
HELP!!!!!!!!
I have HTC3300, tried to update rom, now its bricked. I tried to start bootloader by pressing the voicebutton and softreset but loads in t-mobile screen and hangs, im unable to start the bootloader.
Is this end of story or are there any other options to get the bootloader to start????
please help
Bootloader
I had a problem with my phone loaded touch flow 4 and cid unlocking, everything was fine then after a while it froze at boot up.
I look put the battery and did a hard reset, put it into bootloadeder mode, reflashed with a t-mobile rom does not need to be cid unlocked to do that.
Once origonal rom was working, cid unlock again, flashed back to touchflow 4.0 - sorted
Where did you got an tmobile rom from can you tell me. Mine is also freezing on booting almost once every day or so after I've upgraded to 4.0
HI all,
yesterday my Orbit crashed. Whenever i try to turn it on, it gets stuck, and only shows the first 2 lines when loading, and does not show the GSM version and OS version, I tried to do a hard reset, nothing helps, it just keep stucking on the 1st screen with the first 2 red lines.
Anyone any ideas ???
Thanks
Worth a Try
You might just have a go at putting it into bootloader mode and flashing with a new or the same ROM.
I wouldn't like to suggest it would definitely work, but it'd be worth a go.
How do i do that ?
When in doesnt recognize a connection ?
igal said:
When in doesnt recognize a connection ?
Click to expand...
Click to collapse
It may be able to make a connection in bootloader mode. Like I say, it may not work, but have you tried it? Have you got a better idea?
igal instructions how to go into bootloader mode are in the first thread of the forum. You dont need an activesync connection just connect via usb.
As Mark has said above Activesync connection is not required for "connection" Bootloader mode activates a USB connection which allow ROM flashing.
Use an official O2 Rom or similar, which AFAIK does not require USPL'd ?
Check this thread, which succesfully fixed my bricked Orbit, Remember your on your own though, but if it is knackered now it can't get worse....
My instructions use the official German Rom to get it back up and running, as the English version had not been released. Once you get back up and running you can use any of the other cooked ROMS that are about.
http://forum.xda-developers.com/showthread.php?t=312495
DISREGARD the bit about WINRAR, just get an official ROM, stick your handset in bootloader mode and run ROMupdateUtility.exe
Report back on how you get on.....
I went in to..
Bootloader mode. and got the RGB screen with usb connection, but when i try to flash ( both the rom im using now B&B 4.1 and also an official ROM by O2 ), it quits after 3% altough i have a CID unlcoked by imei-check, and i flashed like 10 times before...
any ideas ??
Thanks!
You must use the factory rom specific to your device including language - did you?
Yes i did.
Not working....
Hi Igal,
which rom eaxctly did you try to flash with to rescue your Artemis from the bootloader?
Rgs
Cyber
I used O2's rom
I downloaded the official rom of O2 ( Windows Mobile 6 ). Once it told me "Invalid Vendor" and the other time " Image corrupted " ( I have O2 XDA ORBIT ).
Are you in the uk using a rom from 02 UK?
I had a similar problem like you are having and managed to rescue using the HTC WM5 standard rom.
Im not in the UK, But
The phone is a UK one, and i tried to rescue it with wm6 official rom, Do you think i should try with wm5 ? Where do i get it ?
igal said:
The phone is a UK one, and i tried to rescue it with wm6 official rom, Do you think i should try with wm5 ? Where do i get it ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=318696&highlight=mobile+5
Hello, I cant follow/or understand the guides found here or in
trinityguides to recover my device.
I have successfully flashed severa cocked roms before, however this last one failed and left me in tri-color screen displaying SPL-9.99-CP
What do i need to do, my active sync want connect and give me the green OK.
It say it cant detect my device when i connecs it?
Please help, im not good at this, how can i get the device to be recognized by
active sync?
Any help very much appreciated!
allanredo said:
Hello, I cant follow/or understand the guides found here or in
trinityguides to recover my device.
I have successfully flashed severa cocked roms before, however this last one failed and left me in tri-color screen displaying SPL-9.99-CP
What do i need to do, my active sync want connect and give me the green OK.
It say it cant detect my device when i connecs it?
Please help, im not good at this, how can i get the device to be recognized by
active sync?
Any help very much appreciated!
Click to expand...
Click to collapse
In bootloader mode AS will not recognized the PDA. As I see there is DES crash proof hard-spl on your PDA. Stay in bootloader mode, and try to flash an other rom, or the original offical rom. If does not work here is a useful link:
http://forum.xda-developers.com/showthread.php?t=308691
thanks for your quick reply!
how can i flash without the active sync is connected?
i have tried but the rom update utility says it cant find device and exits
or can it be done withot connection, if so how?
thanks for all input, as i said im not an experienced "flasher".
I don't know why, but after successfull cooked rom update (Schap, Faman, etc..) the last one didn't work and stick to 3-color (I'm under olipro 1.3)
I just made a spl update without any pb (take a look if on your pda screen it shows USB instead of serial) don't care about activsync
Then a radio update (1.40 instead of 1.50).
Shap rom update didn't work anymore (cache issue), so I'd just copied RUU_signed.nbh from SChaps replacing the one into Fman folder, and just working fine...
If it can help you.
Had this kind of problem
Simplest thing is to load rom from SD card (do search on this).
In short get the ROM you want - ROM***.nb file and rename it as TRINIMG.NB put it on the SD card. Launch bootloader and follow instructions. Otherwise check thread VISTA FLASH DISASTER...
Good luck,
Solved!
I reconnected the phone ( it sad USB in the bootloader btw)
Downloaded schaps wm6pro and unzipped, enterd the ruu and flashed, even thoug active sync was inactive.
I didnt have to go any further than this.
Many thanks, now i might dare to try som more roms, done ax3ls and karmba's so far looking forward to test schaps now.
Look in the Trinity Wiki. It describe how to flash from the SD card. this will fix you up.
hi all,
i have a problem with my hermes (cingular 8525) herm 100.
when i start up, i got, on the red lines, all the values except R NONE and G NONE.
the OS start up with no problem but no signal.
i tryied to load new radio with memory card but it stops around 20% and stay there still.
no problems to load a new ROM.
what can i do with it??
please someone help me!
it sounds like you screwed it up by flashing it wrongly , put it in bootloader mode and try flashing the carrier rom you had originally for your device.
thank you for your answer...
but i have to go back with the spl as well?? can you, PLEASE, explain me how to do it??
i am not that good in it!!
mickscores said:
thank you for your answer...
but i have to go back with the spl as well?? can you, PLEASE, explain me how to do it??
i am not that good in it!!
Click to expand...
Click to collapse
if its hard spl i believe its perminant. if you re-flash the carrier rom it'll reset the os and radio back to stock settings so you can start again. id try that before looking into anything else
what does makes me think is about the red line at the start up gives me NONE and not NO GSM...it's a bit different from the other kind of brick.
i will try to put again the original setting by ATT and i will let you know..
cross the fingers for me!
I download the file and I try 2 different methods:
1 - upgrade via Pc thru acrive sync, it get's stucked on 12% and then ERRON
2 - upgrade via SD, it get's stucked at the same percentage when is suppose to write GSM
suggestion : shoud I try to program without radio?
Hello,
afther an update on my p3600 with an error.
I have only the bootscreen of the rom.
I cant flash any new rom , every time i have connection errors.
is there any chance to correkt the problem or to delet the phone completly?
A Hardreset doesn´t bring anything.
Please help me i cant do anything with my p3600.
take a look:
http://forum.xda-developers.com/showthread.php?t=572747
i read the thread,
but i have tested to update the hard spl but it doesn´t work.
The update software always told me that there is an connection error.
But when i want to install the rom 6.1 manila 2g the software found an connection and start to update but when the software is at 1% the update software told me that the rom is corrupt
This is the reason you should always install HardSPL BEFORE you start flashing any roms at all.
Once you have bricked it, then it is too late to put HardSPL on there.
The whole point of HardSPL is to ensure that you will always be able to get a connection to the device even if you have a broken rom on there.
If the phone is bricked, with no HardSPL on there, your only remaining option would be to try using an unbricking exploit procedure like this:
HTC Trinity Stack Overflow exploit - how to unbrick any Trinity stuck in bootloader!!
^^^ Sorry I have never had to do this myself and have no experience or advice on how to use that exploit utility ... hopefully there is enough help in that thread to get you going again.
Good luck.
EDIT: I thought I'd better just check you do realise that you can get the Tri-colour SPL screen up manually by holding down POWER + CAMERA buttons and 1sec press of STYLUS RESET button. Quickly reading through that splxploit thread I was disturbed to see just how many people didn't even know who to do that
Maybe it's just my paranoia from owning an "i" model but I have never done a single rom flash without first using that 3 button trick to get into SPL screen.
praefke1986 said:
...But when i want to install the rom 6.1 manila 2g the software found an connection and start to update but when the software is at 1% the update software told me that the rom is corrupt
Click to expand...
Click to collapse
Try flashing the Stock ROM that came with your phone. It may get you going again. Can be downloaded from the HTC website.