I've just updated the ROM on my Orange SPV M700 to ADW version 1.1. The GPS software I had installed was Navigon. I've just reinstalled it and my device ID has changed.Is it possible to edit the registry and change my device ID to what it was before I did the ROM upgrade?
To change your Device ID, go to Start -> Settings -> System Tab -> About -> Device ID Tab.
There you can change your Device ID and Description.
Had the same problem with Navigon. You can call the Navigon helpline and they will generate a new key for your device. Just explain that you upgraded the firmware of the pda.
Related
can't get bluetooth receiver to connect only connect to 6 and 7 need it to connect to 2 and three :?:
Follow EXACTLY
Tomtom Installation...
There are 3 key steps in making TomTom 5 work on an i-mate JasJar with a Bluetooth GPS.
Many tips are scattered around in different Forums.
Here is a COMPLETE overview of what to do.
STEP 1 : INSTALL TOMTOM5
You do this by copying the CAB files from the CDROM (eg F:\PocketPC) to the JasJar and launch one by one from there with the explorer of the JasJar.
You can install voices the same manner by copying the CAB files to the Jasjar (eg from F:\Voice on the CDROM)
STEP 2 : UPGRADE TO V5.1
Extract and copy the files to a folder on the JasJar and install them from there.
STEP 3 : ACTIVATE THE GPS CONTROL PANEL
Fire up a registry editor
Go to: HKEY_LOCAL_MASCHINE\ControlPanel\GPS Settings
Delete the DWORD marked "hide"
Add a DWORD called "Group" and give it the value of "2" (dec)
The GPS panel will now show up in your connection settings.
STEP 4 : INSTALL TOMTOM5
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In BT, select the OUTGOING port to 8.
3. In the GPS control panel, select the GPS program to 0 and make sure that the hardware one, is set to None.
4. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 0 free. Select COM 0 and close TT5.
5. At the GPS control panel again, now select COM 8 (before we set it up at 0).
6. At BT: select OUTGOING port to 0.
7. Back again to GPS control panel and select NONE.
8. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
Isnt there a way to make TOM TOM 5 work without upgrade 5.1
Hi Ia m unable to upgrade my TOM TOM 5 to 5.1 or 5.2.1 since i nomore have my product code. I move from singapore and am carried just the SD card...now my new XDA Mini S is refusing to connect to the BT-GPS bluetooth reciever on TOM TOM Navigator 5 and i cant upgrade qithout a product/activation code.
Any suggestions or workarounds appreciated to make it work with ver 5 or means to uprade it.
Regards
A Very Simple step Mate, Just upgrade ur tomtom to 5.21 and you will see all the com ports. You dont need to do any registry settings.
Hi All,
Am sure there are many threads - did a search but came up with nothing like mine. O2 Branded XDA Orbit with Vodafone SIM.
Upgraded from Default ROM to WM6 Bepe version - everything seems fine except my GPRS Connection.
CE OS 5.2.1238 (Build 17745.0.2.3)
Rom 3.4.207.1 WWE
4/18/07
Radio 2.49.90
Protocol 4.1.13.25
Model ARTE200
I have tried connecting to GPRS using my VODA SIM - which I know for a fact IS enabled for it as I was using it on my XDA-IIs - Now I just cannot connect to the GPRS to access my gmail or anything whatsoever.
I entered all the details for Voda-GPRS manually and also from CAB from this site and still cannot connect - it starts to connect and says the "connection was disconected" check settings...!!!
I am at my wits end on what the problem is !
Any ideas?
Dev
A couple of months ago I had an HTC Beta of WW6 and had to wipe it as it would not connect, same as you. Afterwards, I found out that WW6 install resets varions Connections settings incorrectly (part of beta).
Go to Settings / GPRS settings and make sure you have CHAP selected
My install had PAP selected.
Jeff
Sounds to me like the rom you have used has a feature/setting that disconnects GPRS connections for whatever reason - possibly to stop programs from auto connecting with GPRS.
Have you checked with the creator of the ROM to see if anything like this was implemented in to it? It may be fixable with a registry tweak or setting.
Mine worked both Bepe and B&B V2 ok.
GPRS:
1. Click on Start > Settings > Connections tab > Connections
2. Under the heading 'My Work Network', click on 'Add a new modem
connection'
3. The settings you require are:
4. Name = Vodafone MMS
5. Modem = Cellular Line (GPRS)
6. Click 'Next'
7. Access Point Name = wap.vodafone.co.uk
8. Click 'Next'
9. Username = wap
10. Password = wap
11. (leave the Domain field blank)
12. Click 'Finish'
Thanks Guys - Worked fine - Seems I was giving the APN wrong...
Well finally atleast it's working now...
Now only to get the Blackberry connect to work and I'm on cloud nine !!!
Hi I was trying to set my dad up with my old wizard.
He's on vodaphone and I've been able to get the GPRS working using the above settings (I also had to add a proxy server of 212.183.137 - type - HTTP port 8799) but IE is now browsing the internet.
However when I try to connect to a imap mail account it just says connecting, then says failed to connect, check settings.
Does anyone with a vodafone account know if you're able to connect to a personal mail server?
Are there any more specific proxy settings?
(start -> settings -> connections -> manage exsiting connections -> proxy settings ->advanced)
Or any advice from someone who's been able to get this working.
Cheers
Matt
All Carrier UK Settings
I downloaded this from the HTC Site - It has the settings for all carriers...Maybe this will help.
Thanks tried this, but it has an APN of internet and these settings always give me the
'answering modem has disconnected error'
I used to get the sae error and then I called up Vodafone and told them. They reset the SIM from their side and things started working fine.
OK thanks for that. I'll just hand it over to my dad with GPRS working and see if he can get his sim card reset.
Cheers
Matt
Goodday to all,
I have update my HTC P3300 to WM6.
When i go to the Com Manager and i selected the settings and push the button wireles i get a wrong settings for excample i get the bluetooth settings.
The same when i selected the phone i get the wireless settings.
So the text doesn't attached to the write program.
Does other have the same problem when updated to WM6 and what is the solution to fixed this???
Thanks in advance and Kind Regards
Davidoff
I have a Touch Pro2 with WM 6.5 installed.
I have two programs (so far) that I have installed which need the 'owner name' to be completed in order to able to register them (Resco Explorer 2008 and Fitaly). However, while with my WM 6.0 device, I could perform the action under Settings --> Personal --> Owner Information, on my new device, the option is missing from the Personal tab.
Is this going to be registery 'hack' - if so, please would someone tell me how to do it?
Got it!
Found it through Googling on this very site (unfortunately, I can't make the Search function here work the way I think).
Just in case anyone else has the same problem, the link is http://forum.xda-developers.com/showpost.php?p=4830384&postcount=126
Go Here HKEY_LOCAL_MACHINE\ControlPanel\Owner\Hide
and set Value to 0
Hi!
My TP2 is a TMobile 6.1 default ROM.
I am trying to run some foreign SW on the thing, but I am getting an error due to the locale and whatnot. The instructions were:
Groundwork:
Install Program (done)
Install Font (done)
Everytime work:
Run usemynls.cab if Korean is not in Regional Settings (mine was not, so I ran it)
Change to Korean in Regional Settings (I did)
*** TP2 told me to reset device for setting to take effect
Reset device by power off tap and then power on
Locale is back to English (I kind of expected this part)
Is there any way to force TP2 to accept itself as having changed locale without resetting? I think that is the only way I can run this app! Thank you!