I managed to finally figure out how to use activesync without having to use a cradle. So far I haven't had the troubles that I have had when I used the cable and cradle. No more inactive activesync, can't synchronize errors, and having to restart activesync every few hours or so.
I managed to have activesync running for 2 days straight without any problems and restart of any sorts. This leads me to beleive that using wifi with activesync is more stable than using a usb/cradle.
My question is, can I completely abandon the USB/cradle when upgrading ROM, app installs, or anything that has to do with using the cradle and usb cables?
I don't know the answer for certain but I should think so.
What I need to know is how to sync using wifi without it trying to access GPRS instead.
Any ideas?
My 2s is configured to access wifi first (I think the setting is under the wifi config). If wifi isn't available, then it tried to access GPRS. My carrier charges an arm and a leg to use gprs, so I never configure the phone to access my carrier's GPRS. I rely on free public WIFI access and my home WIFI access to do all my internet jobs.
You'll still need the USB for ROM updates; everything else you can do over WiFi or BT.
wifi
Hi nomad,
im trying to configure my laptop wifi (peer-to-peer) and 2s. My 2s can connect to laptop wifi but the activesync is not performing connection or no connection at all. appreciate your help.
thanks.
@3waygeek, Thanks as I have not tried update anything since I pay a service to upgrade my things on my PPC. Sprite also does not like to backup via WiFi. I had to connect the PPC to the cradle.
@hoobas, I have WinXp/Sp2 installed. I have not had any problems connecting other than the occasional ActiveSync annoyance when I'm connecting with the USB cable. I'm sorry that I can't help you. I have not experience your problems so I can not give you a diagnosis.
wifi and MS Activsync
hi nomadman
can u let me know how u set up wifi to sync activesync? i have a WLAN at home and cannot see where the option is to use wifi to sync MS Activesync.
I also want to get away from having to use the cradle each time i want to sync . AT present i am doing it using infrared which is ok but like u said wifi must be better.
Also, i have two machines (a laptop and a desktop) in my wifi network. Desktop is hardwired and laptop hangs off wirelessly. How will my xda IIs know which machine to sync with?
cheers
azeem
ActiveSync starts automiatically on USB, serial, and Bluetooth connections. You'll have to use the ActiveSync link located on your PPC to connect to the PC via WiFi. This is assuming that ActiveSync does work on both your PPC and desktop. So it's best to connect to ActiveSync at least once via cradle before going ActiveSync via WiFi.
Only install ActiveSync on either your lappy or your deskop, but not on both. One limitation with ActiveSync is that you can not use more than two partnerships without some fiddling around with your PPC and your networked PC.
About Cradle ActiveSync.
Uninstall ActiveSync -> Reboot PC -> Reinstall Active Sync 3.8 and don't touch any thing or open any programs while installation is in progress.
Mine is working like a charm
nomadman said:
I managed to finally figure out how to use activesync without having to use a cradle.
Click to expand...
Click to collapse
How did you do it?
I've used the search function but I couldn't find anything about it.
Thanks,
Dino
OK, got it to work, too. Very nice
But I had to set my Network Connection from "Internet" to "Work".
Is it possible to use both settings? My Wireless LAN connects also
to the internet, so I won't switch everytime I want to sync or surf.
Dino
Re: wifi
hoobas said:
Hi nomad,
im trying to configure my laptop wifi (peer-to-peer) and 2s. My 2s can connect to laptop wifi but the activesync is not performing connection or no connection at all. appreciate your help.
thanks.
Click to expand...
Click to collapse
Hi hoobas, how do you configure your laptap wifi for peer-to-peer? (this is quite off topic ) been trying to do this for sometime. thanks
Here is a great site site that might help some of you guys out.
http://www.pocketpcfaq.com/faqs/activesync/installation.htm#Installation:
hlim,
go to settings, network connections, right click wireless connections, click properties...
tab to wireless networks, click add...
enter your ssid, and click the "ad hoc" at the lower portion of the form...
hope it helps...
hoobas said:
hlim,
go to settings, network connections, right click wireless connections, click properties...
tab to wireless networks, click add...
enter your ssid, and click the "ad hoc" at the lower portion of the form...
hope it helps...
Click to expand...
Click to collapse
Thanks a lot how about the settings on the computer side?
Re: wifi and MS Activsync
azeemakhtar said:
hi nomadman
can u let me know how u set up wifi to sync activesync? i have a WLAN at home and cannot see where the option is to use wifi to sync MS Activesync.
I also want to get away from having to use the cradle each time i want to sync . AT present i am doing it using infrared which is ok but like u said wifi must be better.
Also, i have two machines (a laptop and a desktop) in my wifi network. Desktop is hardwired and laptop hangs off wirelessly. How will my xda IIs know which machine to sync with?
cheers
azeem
Click to expand...
Click to collapse
In the network settings of yr phone, enter the ip address of machine you want to sync with as WINS server. That will tell yr phone which machine it has to connect to. You can set up peak and offpeak timings in the mobile schedule of activsync on ye PDA, so that it can sync every 10 or 15 mins .
Sorry if my question is too noobish. I have read so many articles talking about establishing wifi sync between a wifi enabled PPC and a wifi enabled PC, but havent been able to do yet. Do i have to have another software to enable the connection ?
Can any one please explain slowly and in detail how you could do that, i've been searching for quite a long time but still no result. And 1 more question is that after i can sync through wifi between my O22s and my laptop, does it affect the wifi connection of my laptop and my O22s? A bit silly right but i'm a new user and i'm not in IT field also. Thanks for any suggestion from you guys.
@azeemakhtar,
http://www.pocketpcfaq.com/faqs/multiplepartnerships.htm
@ducga,
1. Install ActiveSync 3.8 on your lappy or PC, but not on both.
2. connect to activesync via cradle first.
3. remove unit from the cradle and reset.
4. click on the ActiveSync link on your PPC and tap on the Sync button.
* The above procedure should be able to get activesync working via wifi as long as there isn't a setting problem in your router managment or firewall.
* The above precedure should work if your are able to connect to the interent on your PPC via wifi.
nomadman said:
1. Install ActiveSync 3.8 on your lappy or PC, but not on both.
2. connect to activesync via cradle first.
3. remove unit from the cradle and reset.
4. click on the ActiveSync link on your PPC and tap on the Sync button.
Click to expand...
Click to collapse
I also have to do the following:
3a. Click Start / settings / connections / Network cards
3b. Select Network Adapters
3c. Change 'My network card connects to' from 'The Internet' change to 'Work'
3d. Close, reset (for luck)
3e. Open ActiveSync on your desktop PC, select File / connection settings / and tick allow Network Ethernet !!
4. Now when you click on the ActiveSync link on your PPC and tap on the Sync button - it won't try to use GPRS to connect and WiFi will be listed as your Work connection.
I always have to change my network card settings back to 'The Internet' before I can browse again.
Rich
Re: wifi and MS Activsync
azeemakhtar said:
i have two machines (a laptop and a desktop) in my wifi network. Desktop is hardwired and laptop hangs off wirelessly. How will my xda IIs know which machine to sync with?
Click to expand...
Click to collapse
Go to ActiveSync on your XDA, click tools, options.
It will say "When syncing remotely with a PC Use this PC:"
It should list the network name of the PC you currently have a partnership with. i.e. "TOMSLAPTOP"
Rich
Hi Everyone.
Ive got my O2 XDA Orbit configured to sync my mail and Calendar etc from my Exchange Server at work. If I use GPRS or WIFI, this works a treat. However, I have a couple of locations where WIFI isnt available, but a USB connection to a PC is. Rather than setup a partnership at these places (I dont need to sync anything locally with the PCs), I want to use the internet connection on the PC to connect. Im sure that with my old EXEC, when I connected it to the USB port, it went right ahead and synced through the internet with Exchange, but this machine never seems to start doing so.
I have disabled partnerships on the PCs so that I dont have to click "Guest" each time I connect it. when the USB is connected, Activesync will not work at all on the Orbit.
I know youre all cleverer than me, does anyone know why this happens?
Steve
When I startup the remote desktop application and try to connect to a server, I get an error message if I haven't already connected to the internet with another application. I've tried installing the wm6 terminal services client from several different downloads, but I haven't found one that will cause my 8525 to connect to the internet when you run it. The error message that shows up is this:
Connection status
Cannot connect. Likely reasons are:
1. Specified computer name or ip does not exist
2. A network error occurred while establishing the connection.
If I startup IE and browse to a website, it will work fine. Anyone know what I need to do to make the wm6 TS client initiate the internet connection?
thexman said:
When I startup the remote desktop application and try to connect to a server, I get an error message if I haven't already connected to the internet with another application. I've tried installing the wm6 terminal services client from several different downloads, but I haven't found one that will cause my 8525 to connect to the internet when you run it. The error message that shows up is this:
Connection status
Cannot connect. Likely reasons are:
1. Specified computer name or ip does not exist
2. A network error occurred while establishing the connection.
If I startup IE and browse to a website, it will work fine. Anyone know what I need to do to make the wm6 TS client initiate the internet connection?
Click to expand...
Click to collapse
It uses the "Programs that automatically connect to a private network should connect using:" setting in Settings -> Connections -> Connections -> Advanced -> Select Networks. You can set it to the preferred internet connection, and that should make it trigger on attempting to connect with remote desktop.
N2A said:
It uses the "Programs that automatically connect to a private network should connect using:" setting in Settings -> Connections -> Connections -> Advanced -> Select Networks. You can set it to the preferred internet connection, and that should make it trigger on attempting to connect with remote desktop.
Click to expand...
Click to collapse
I changed the private network settings to media net, but it still won't trigger a connection. I also tried setting it to isp, but that didn't work either. Any other suggestions? I can't be the only one with this problem.
I'm having the same issue.
From what I've read, this is about as good as it gets in wm6 unless microsoft decidss to release the terminal services client as a stand alone install for wm6. They changed the licensing in wm6. In wm5, the rdp client was a required piece. In wm6, it's an optional licensed addon. That means that unless our wireless phone provider is willing to pay to license the rdp client for our devices, it isn't officially available for them and definitely not supported. Unfortunately, the new AT&T didn't bother to mention that they opted out of the rdp client for wm6 on the 8525 in their upgrade notes. It's a shame really. I won't be buying another windows mobile powered device until it comes with the rdp client again or microsoft decides to stop being stupid and just release a free download for it like they do for all their other platforms. For now, I just hope that logmein continues to remane free and available. Technically, it's a far better solution for our devices than rdp anyway.
thexman said:
From what I've read, this is about as good as it gets in wm6 unless microsoft decidss to release the terminal services client as a stand alone install for wm6. They changed the licensing in wm6. In wm5, the rdp client was a required piece. In wm6, it's an optional licensed addon. That means that unless our wireless phone provider is willing to pay to license the rdp client for our devices, it isn't officially available for them and definitely not supported. Unfortunately, the new AT&T didn't bother to mention that they opted out of the rdp client for wm6 on the 8525 in their upgrade notes. It's a shame really. I won't be buying another windows mobile powered device until it comes with the rdp client again or microsoft decides to stop being stupid and just release a free download for it like they do for all their other platforms. For now, I just hope that logmein continues to remane free and available. Technically, it's a far better solution for our devices than rdp anyway.
Click to expand...
Click to collapse
wtf...well anyways the client is around on the forums, so why worry about MS, and it has nothing to do with that, set your data connection to always on, and you wont have to initiate the connection with IE, Resco FTP, and the old aim client are the same way..
Built most of my site from behind the wm6 client, seems to work fine here.
RDP does not work with VPN
I have an 8525 with WM6.0. I am able to connect to the VPN through GPRS. However I am unable to use RDP. I have installed Remote Desktop Mobile but it will not connect to my terminal server running window server 2k. Does any one have any ideas?
Hi folks, ive got an Excalibur(duh)runnin the Brightpoint ROM, WM6 and all that jazz...and I also have a personal server here at the house that runs Windows Server 2003....my question is can I connect my phone, over the network using EDGE, GPRS, or WiFi to my server and access files and stuff. I dont need to do any settings or crap like that, I just want to be able to monitor my data coming in, and data going out...thanks for any help!
I have a similar situation and was wondering if you made any progress on a Smartphone.
You guys have to be more specific then that if u want answers...
OrganicM said:
You guys have to be more specific then that if u want answers...
Click to expand...
Click to collapse
I think maybe what they are looking for is some software that supports a Remote Logon / Remote Desktop Connection (RDC).....
It's not something I have seen on a phone ROM since I had an SPV M500 with Smartphone 2003 Pocket PC Edition.....
.G.
the only way i have found to do that is via ftp. host the ftp on the server and run an ftp client on the phone. the phone doesnt support netbios or anything so you wont be able to access network drives or shares even if you are on the servers lan
Hi,
I'm stuck for a while without internet access except via 3G. I've got a dev phone running the Mango beta 2.
I was wondering if anyone had an idea about how I could make a proxy server or any other kind of tethering for it.
I was looking to use HttpListener or Sockets.Listen but both are unavailable for the phone.
I thought I might have to make a server application for the laptop that has a proxy server listening port and a phone listening port then have an application on the phone that connects to the server app. Once established, pass requests on from the laptop app to the phone app and get the phone to do the requests.
Unfortunately, my knowledge of how to do this over sockets is limited and if anyone could give me some advice I'd be grateful.
Cheers
Depending on which phone you have it might be possible to switch into teethering mode in the MFG app (usually installed by dialing ##634#).
HTC 7 Trophy .. I'm not aware of a way to use tethering on that.
PhantomNZ said:
HTC 7 Trophy .. I'm not aware of a way to use tethering on that.
Click to expand...
Click to collapse
Do you have a old Windows mobile 6.5 device sitting around ? Then for the temp window you need it, switch ESN/SIM to your 6.5 device, wi-fi teather, then swap back ESN/SIM when you need it...
Depending on your carrier....I know with Verizon, I can change hardware on-line
I'm unaware of how the network stack works in WP7.
If you're connected to WiFi, in your application can you choose to use 3G or WiFi? Maybe there are some P/Invoke calls you could do?
If so, then connect your phone to a router ... same with your laptop. Then relay HTTP(S) between the two connections.
Otherwise, we'll need to be able to execute native applications.