When I startup the remote desktop application and try to connect to a server, I get an error message if I haven't already connected to the internet with another application. I've tried installing the wm6 terminal services client from several different downloads, but I haven't found one that will cause my 8525 to connect to the internet when you run it. The error message that shows up is this:
Connection status
Cannot connect. Likely reasons are:
1. Specified computer name or ip does not exist
2. A network error occurred while establishing the connection.
If I startup IE and browse to a website, it will work fine. Anyone know what I need to do to make the wm6 TS client initiate the internet connection?
thexman said:
When I startup the remote desktop application and try to connect to a server, I get an error message if I haven't already connected to the internet with another application. I've tried installing the wm6 terminal services client from several different downloads, but I haven't found one that will cause my 8525 to connect to the internet when you run it. The error message that shows up is this:
Connection status
Cannot connect. Likely reasons are:
1. Specified computer name or ip does not exist
2. A network error occurred while establishing the connection.
If I startup IE and browse to a website, it will work fine. Anyone know what I need to do to make the wm6 TS client initiate the internet connection?
Click to expand...
Click to collapse
It uses the "Programs that automatically connect to a private network should connect using:" setting in Settings -> Connections -> Connections -> Advanced -> Select Networks. You can set it to the preferred internet connection, and that should make it trigger on attempting to connect with remote desktop.
N2A said:
It uses the "Programs that automatically connect to a private network should connect using:" setting in Settings -> Connections -> Connections -> Advanced -> Select Networks. You can set it to the preferred internet connection, and that should make it trigger on attempting to connect with remote desktop.
Click to expand...
Click to collapse
I changed the private network settings to media net, but it still won't trigger a connection. I also tried setting it to isp, but that didn't work either. Any other suggestions? I can't be the only one with this problem.
I'm having the same issue.
From what I've read, this is about as good as it gets in wm6 unless microsoft decidss to release the terminal services client as a stand alone install for wm6. They changed the licensing in wm6. In wm5, the rdp client was a required piece. In wm6, it's an optional licensed addon. That means that unless our wireless phone provider is willing to pay to license the rdp client for our devices, it isn't officially available for them and definitely not supported. Unfortunately, the new AT&T didn't bother to mention that they opted out of the rdp client for wm6 on the 8525 in their upgrade notes. It's a shame really. I won't be buying another windows mobile powered device until it comes with the rdp client again or microsoft decides to stop being stupid and just release a free download for it like they do for all their other platforms. For now, I just hope that logmein continues to remane free and available. Technically, it's a far better solution for our devices than rdp anyway.
thexman said:
From what I've read, this is about as good as it gets in wm6 unless microsoft decidss to release the terminal services client as a stand alone install for wm6. They changed the licensing in wm6. In wm5, the rdp client was a required piece. In wm6, it's an optional licensed addon. That means that unless our wireless phone provider is willing to pay to license the rdp client for our devices, it isn't officially available for them and definitely not supported. Unfortunately, the new AT&T didn't bother to mention that they opted out of the rdp client for wm6 on the 8525 in their upgrade notes. It's a shame really. I won't be buying another windows mobile powered device until it comes with the rdp client again or microsoft decides to stop being stupid and just release a free download for it like they do for all their other platforms. For now, I just hope that logmein continues to remane free and available. Technically, it's a far better solution for our devices than rdp anyway.
Click to expand...
Click to collapse
wtf...well anyways the client is around on the forums, so why worry about MS, and it has nothing to do with that, set your data connection to always on, and you wont have to initiate the connection with IE, Resco FTP, and the old aim client are the same way..
Built most of my site from behind the wm6 client, seems to work fine here.
RDP does not work with VPN
I have an 8525 with WM6.0. I am able to connect to the VPN through GPRS. However I am unable to use RDP. I have installed Remote Desktop Mobile but it will not connect to my terminal server running window server 2k. Does any one have any ideas?
Related
Hi all,
I've just got my XDAIIs and am just playing about with it before I start loading all my apps and syncing with outlook.
I've got the Wifi working with my home access point (with encryption).
When I try and use Terminal Service to remote desktop to my pc it trys to dial-up to O2 Active GPRS - why won't it use the wifi connection thats enabled? I can ping the pc via hostname and ip fine though.
By the way, the XDIIs is setup for use on O2 as standard (it's a brand new contract phone).
Any ideas? ANy help would be appreciated.
Many thanks
i think if you change the type of network from internet to work on the xda iis, then it might work.
I had a similar problem with activesync over wifi and had to set network card to work to get it to connect.
I tried that and it was still doing the same.
For atest I deleted all connection settings.
Then Terminal Services told me that I HAD to create a VPN connection setting for the server I'm connecting to. I did this but it kept faling when trying to connect with user/pass error.
I then thought I'd try the IP address of my machine instead of the hostname - This worked straight away!!
So does Terminal Services not like hostnames? I was hoping to connect to my server when I'm away from home using my no-ip address.
Does anyone have a similar setup or can shed any light on this?
Many thanks
DOH!
Just realised I should be using the fully qualified hostname rather than just the pc name.
i.e.
"server.uniquetouch.local" instead of just "server"
"athlon1400.uniquetouch.local" instead of just "athlon1400"
"pentium4.uniquetouch.local" instead of just "pentium4"
"dell.uniquetouch.local" instead of just "dell"
Now that I've got that bit working, I'm going to add the O2 GPRS connection settings back in and see if it still works.
Have you tried pocketVNC yet?? im just about to install it as i run vnc on all our system instead of terminal services
I also recommend VNC viewer.
It acts, amongst others, as a remote control to my windows media player & winamp on my media server.
You can find it all over the place, but here is 1 link:
http://www.cs.utah.edu/~midgley/wince/vnc.html
Does anybody tryed VPN client for HTC3300, supporting Windows Mobile 5.0 and Nortel Contivity switch?
I have tried several solutions, incl. Bluefire VPN, AnthaVPN, ApaniVPN, NCP client - but could not get satisfactory result - some of them doesn't work at all, some of them couldn't establish connection or run on Windows Mobile 2003
Some experience with Bluefire VPN:
I have installed trial, it works on WiFi connection, but doesn't work on cellular (GSM/GPRS). An error -56 appears (no physical connection is present) although device connects to GPRS successfully and I could browse Internet
Could anybody advice?
Pavel
My experience
I had to set up such a connection to my company VPN. Ok, I wasn't working on HTC p3300 but I was in the same condition for days. At last, I discovered that the provider was masking off the VPN frames. I had to buy another service and I had to connect to another "access point". (I don't remember how it is called exactly in GPRS). From then on I could either navigate internet or use vpn, but they are mutually exclusive for the provider policy. "we did it for security purposes..." they said. The problem is that one technician on 100 knows it. The compant was Vodafone ITALY. So I suggest you have a check with your provider. Maybe there's nothing wrong in your configuration.
Bluefire VPN is currently not compatible with WM5 AKU3. It works on devices wiht AKU2 and below. This has something to do with the way AKU3 names the GPRS data connection. It is different than previous versions.
Bluefire is aware of the issue and said they will have this corrected in the next release, due anytime now. I am running a pre-release build that the sent me and can confirm that it works with GPRS. The problem is this build breaks wifi on the device.
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
here's remote desktop. How do you use it? I don't know how to set it up.
thanks!!!!
now for VPN....
cheers!
The remote desktop client is available in several places in this forum for download.
To set up a VPN:
add a new VPN server connection
enter the name / ip of the server you want to connect to
select the vpn type -- ipsec or pptp
next
enter your user name and password
finish
The only way I have found to connect to the von is to goto
Start-Settings-connections-connections-edit my vpn servers- -- tap & hold MY VPN
select connect
you must be using a plan that assigns you a public IP (not WAP)
hope this helps
JTK said:
Hi Guys,
either I dont know how to search or there is no info on VPN on the forum(I probably dont know how to search) In any case. I need assistance. How do I setup a VPN on my TyTn running WM6 and also how do I get remote desktop client? I am sure this was around previously. Did MS remove it from WM6? Or was it HTC? It this is the case.. how can one get it back?
thanks!
Click to expand...
Click to collapse
Thanks cmccarter, done it but how will I know I am connected.. It does not say connected anywhere that I can see and when clicking/hold on the item it gives me the option to connect again, not disconnect as I would have thought The other thing is terminal server does not connect. It connects fine on USB. VPN/Remote desktop connects fine using normal internet on pc from outside the network. So I believe the network settings are fine.. How would I know though if I am on WAP or get an IP. Also ow would I know if the VPN is connected?
thanks
fyi
i also have struggled getting rdp to work over a vpn, in particular over 3+/hsdpa
the only i found in wm5 was to add the vpn connect to the exceptions list of the connection manager, so that it didnt disconnect the vpn whem connecting the rdp.
this occurs more when u use an ip address to connect to a work intranet.
suppose if u use the dns name of the machine and not the ip address then it isnt that much of an issue. in wm5 when u put the ip address in it assumes a an internet rather than intranet connection so it disconnects the vpn to look for the ip over the internet
putting the ip into exceptions forced wm5 to not disconnect it when rdp was looking for it.
i cudnt get it to work this way in wm6 so i am also looking for an answer on this.
rdp to my servers when they have crashed and i am on the road wud b wonderful....
Hi,
I've a similar problem.
I use a VPN-1 SecuRemote that normally connect my PC directly to the company network.
Well, using the share modem tool, I'm not able to reach the gateway.
the share modem system give me a private IP that establish a connection between PC and TYTN.
This connection use the Tytn like a gateway to navigate in internet.
Someone know to solve this issue?
Tanks a lot
if i select start the vpn connection, nothing happens - and i can`t ping the IP`s in the VPN. so i think the vpn ist not open - OR the routing entrie is missing....
is there some shiny "pptp - standalone" client?
greets, Nik
for some reason i dont think the vpn option works over 3g/hsdpa, atleast not on my device using t-mob web and walk.
if i connect the vpn when using wifi it connects and everything is fine, if i try and connect when i'm already running a 3g connection it doesn't work.
i dont think the radio stack is capible of handling a 3g connection and a vpn connection. we might need to go down the route of getting a seprate wm vpn client.
I purchased my Excaliber/Dash SmartPhone thinking the only major difference from PPC was touchscreen support and Office applications but now I'm having difficulty finding information on how to access network resources from a SmartPhone. My next phone will be a Windows Mobile Professional device.
The environment is a Windows 2003 Small Business Server Professional network. I can access the web server but cannot figure out how to browse the network or join the domain. I had to disable certificate checking in the Dash registry to connect via WIFI through the Radius Server. ActiveSync 4.5 works just fine with Exchange and Outlook.
I'm thinking maybe some third party software might help but I have no idea where to begin. Can someone point me in the right direction?
No RDP or network share support in non-touchscreen (standard) mobiles. Closest you can get is some kind of FTP app.
Why would you want to join your phone to a domain? I mean I know the option is there in professional devices, but what does it actually do for you?
Thanks for the information. Microsoft Active Sync allows you to browse the device from a computer (limited) so it doesn't appear that it would be that difficult to have the device at least browse the computer and possibly browse the network.
I dislike devices that have limited functionality built into them. For example. My Samsung T409 has WIFI and Bluetooth and GPRS/EDGE but the WIFI can only be used for T-Mobile [email protected] and Bluetooth can only connect to headsets. I understand that there are many reasons for this from economical to technical.
Similarly, restricting networking capabilities in mobile devices just doesn't make much sense to me but I suppose the typical Smartphone user would not care. I mean that's supposed to be the nature of mobile devices - seamless connectivity. When my T409 switches from a WIFI hotspot to a cell tower it's seamless. I don't even know that has occured until I look at the display.
And as for joining domains, that is like so many other things techheads do like overclocking, running multiple monitors, using KVMs and multiple computers, running Exchange and Internet Security and Acceleration Server and Windows Server Update Services and other stuff. Most people wont need to do this but it's a must for a Techy. Using domains for security and group policy is just a great way to manage computers and devices. And also the option is in my version of the WM6.1 cooked ROM.
In my never ending quest I found a decent application called MyMobiler which will allow you to view your Smartphone on a PC and to some extent control it. http://www.smartphone-freeware.com/download-my-mobiler-v1-0.html
Hi!
I was able to do Remote Desktop by connecting with my tilt 2 to my local Network so I used my Desktops address (192.168.1.4) as computer name and I was able to connect with the Tilt2.
Now, I am trying to figure out how to do the same but when I am not home thus connected to my network.
I tried using my REAL IP address but it was not able to connect to it.
I am running Windows 7 Ultimate any my tilt 2 has a stock 6.5
Thanks
You'll need to set up port forwarding on your router. Looks like this site has a bunch of guides to do so. You need to set it up to forward port 3389 to your desktop address (looks like 192.168.1.4) and you should be good to go, no specific config necessary on your tp2.
Edit: As a side note for security's sake only allow non-administrator accounts to remotely connect and make sure you use strong passwords!
That worked out great...thanks mate!
Yeah thanks Toleraen! I was just now finally getting around to check out the remote desktop client on both my phones, and was looking for exactly that
Glad I could help
Pretty cool to do this indeed...any other software you consider better than this to remote in to my PC?
shaolin95 said:
Pretty cool to do this indeed...any other software you consider better than this to remote in to my PC?
Click to expand...
Click to collapse
I hear VNC get recommended a lot, but I haven't had a chance to check it out yet (I'll do that once I've tried remote desktop). I've attached the cab for it, but I can't find any threads on it's use, you'll have to dig that up yourself
I must have tried a million different settings over several hours and never was able to connect via 3G or even locally when hooked in through wifi. I used to be able to do this with my Treo 750 with little hassle. I have the port forwarding set up on my Linksys WCG200 router. I have even tried turning all firewalls and encryption off. No joy. Anyone else have a Windows XP setup with a Linksys router that has had success with a Tilt 2 stock ROM? Note: I do not have a static IP. Has anyone successfully done this with a dynamic IP?
I am doing it to Windows 7 with a dynamic IP...I just make sure I got the one for the day(week) before living home if I want to remote in from work.
I use Hamachi to create a VPN connection and then remote into my PC that way, leave hamachi running on my desktop and then just run the mobile version on my phone when I want to remote in, that way there are no open port security issues to worry about and the VPN IP address never changes.
Is it any slower or faster than Remote Desktop?
Zylograth said:
I use Hamachi to create a VPN connection and then remote into my PC that way, leave hamachi running on my desktop and then just run the mobile version on my phone when I want to remote in, that way there are no open port security issues to worry about and the VPN IP address never changes.
Click to expand...
Click to collapse
Sweet! I had no idea hamachi had a mobile client now!!
I'm trying it out as soon as I get home today!
I use "Remote Touch Server" to remotely access my computer. The main reason i use it is because it keeps your computer on while you are accessing it. I use it for a handheld monitor for powerpoint presentations. That way I can see what the computer is doing, and tap the screen to advance to the next slide