Hermes update problem. Keeps turning itself off? - 8525, TyTN, MDA Vario II, JasJam ROM Development

I am trying to use the offical HTC WM6 update (I have the dopod 838pro and i am sure i can use this update)
but when ever it starts to patch, my phone would somehow turn itself off (not totally off, just on standby) which will make my update result in a error 260
Tried everything and it doesn't the update doesn't work in bootloader mode.
Can anyone shed some light? I have no clue what is happening.
Thanks!

Never used it myself.
You'll get better updates on this web site that from Windows

I had similar problems after installing a ROM earlier in the year. I think it was the radio upgrade that effectively bricked it. I ended up flashing a legit ROM for my operator (T-Mobile) and taking it back to the store under its year warranty.
For that reason I have never touch the Radio on mine again!
Cheers
Aidan

Related

Orange SPV M2000 - Firmware options

Hi guys,
I'd really appreciate some advice on some potential options for firmware on my Orange M2000.
I am at the latest level of the firmware from Orange (op version: 5.40.1.179, rom: 1.40.00 WWE) but the reason I'm looking for other options is because I recently had my phone swapped on insurance due a problem where my screen would lose it's calibration. Whenever this happened I would have to recalibrate but it would soon go wrong again.
The problem is, my replacement has the *same* problem. I am therefore wondering whether this might be a firmware issue as my first phone was a good 2 years old or something so I wouldnt expect a new one to have the same 'fault', although I suppose it's possible.
Basically, I was wondering what my options might be in terms of adding newer non-orange firmware to my phone and maybe upgrading to WM5 or 6. I was thinking it would be a good idea to try another firmware to see if that fixes the issue before trying to get another replacement.
Along with the calibration issue I also find that receiving MMS messages will sometimes fail and I'll have to reboot to be able to retrieve them. I had this very issue with my old phone (firmware again I wonder?).
If you could point me in the direction of possible firmware / software upgrades it would be greatly appreciated.

Random Freezing - OTA Update?

Hi Peeps,
Since the update the other day I've been getting random freezing on my Desire in that I go to switch the screen on and nothing happens! I have to take the battery out to get it working again. I gave it a hard reset after it happened the second time just in case it had been something I'd done but they've continued happening. It's usually only once a day but has happened twice.
When it happened today I tried calling it while it was in it's frozen state. I got the normal ringing tone on the other phone and eventually it went to voicemail but my Desire did nothing. After pulling the battery and getting it booted up I checked the call logs to see if it had logged anything but nothing was there.
Just wondering if anyone else had experienced the same thing?
If it happens again I think I'll try and get it replaced via Vodafone.
PS - Stock rom with only ES File Explorer, Gensoid, Goggles, Layer, Navigon and Soltaire installed.
I am having the exact same issue! Is anyone else experiencing this?
Are you guys talking about the 1.19 OTA firmware for Vodafone HTC Desire's?
AltDimension said:
Are you guys talking about the 1.19 OTA firmware for Vodafone HTC Desire's?
Click to expand...
Click to collapse
I am not sure what version it was, but I am talking about an update for an Unbranded SIM Free phone.
Yep same here I've emailed HTC no response . I have reflashed thread on here somewhere it hasn't helped have also unlocked / unbranded desire grrrrrrrrr
-------------------------------------
Sent via the XDA Tapatalk App
branded phone..Meteor Ireland
..i have branded desire,after update,no problem at all ...
With the latest official OTA update from Vodafone (1.19.161.5) I have not had any freezing issues. After performing the Software Update (Home Screen -> Menu -> Settings -> About Phone -> System Software Updates ->Check now) it appears that either Vodafone have not authorised the OTA update for 1.21.405.2 or I am not currently on the ugrade list (took 2 days after release date for me to get the 1.19 update).
So which OTA version are you referring to?
Yep, the 1.19.161.5 update. On Voda
not had a freeze today but defo gonna demand a replacement if it does it again.

problem! update hasnt actually updated phone

hey
I have an orange phone which a while ago i flashed with a generic rom and rooted. because of this i was unable to install the OTA so i did a manual upgrade to this rom:
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed.exe
This installed fine (it seems), but as i am on orange, when i rebooted the phone it was network locked. I read that flashing an older radio solved this problem so i went and flashed this radio:
update-bravo-radio-32.30.00.28U_4.05.00.11-signed.zip
This now makes my phone boot and work fine with no lock, HOWEVER, the software version still says it is on 1.15.405.4 and not the updated version!!!!
I have tried testing one of the bugs that was fixed in the new ota (i sms'd myself from skype and it still says it was sent by a facebook contact) and so that fix clearly wasnt present and the upgrade just hasnt seemd to work. Can anyone shed any light on this? could it have anything to do with what is installed on my phone during step 1 of the root? the root package i am using is called r5-desire-root-alt
Thanks for anyone who can help on this
Rooting the phone puts the 1.15.405.4 ROM back on your device, if you want 1.21 you'll have to then buy an unlock code to free up the device...
There is an update ZIP in the ROM dev forum which updates the system but leaves the radio alone so might wanna try that...
thanks for this, but the only update i have been able to find in the dev forum is the one on this page:
http://forum.xda-developers.com/showthread.php?t=695667
but there is a note at the top saying they all contain radio updates
do you have a link to one without the radio update?
Didn't look hard did you??
http://forum.xda-developers.com/showthread.php?t=694564
thank you sooo much, this has finally sorted out my problem

HTC Desire on Orange - Debranding?!

Hi
Apologies for this post if it's been done many times before but I've been digging around now for hours and keep finding conflicting advice on problems I will run into so I just need someone to clarify if it's possible and what I need to do to ensure I don't loose wifi access or brick my phone or anything like that....
I bought a HTC Desire locked to Orange (UK) yesterday and I would like to get it unlocked and debranded. The unlocking part should not be a prob as I'll just buy a code from somewhere (or thats the hope anyhow) but when it comes to reflashing to debrand I keep coming across posts about wifi issues or OTA updates making progs force close, thus the Desire becoming unstable.
All I want to know is..... How do I get rid of all the Orange crap and go to a generic HTC Desire ROM so it would be like I bought a retail Desire? Is this possible without messing up my phone?? I'm currently on 02 (UK) but also bought an Orange PAYG sim just incase things get overly complicated. I would like to stick with my 02 sim but don't want to run into any probs with my phone, and if needs be I could switch over to Orange but that would be my last resort. I would also like to get rid of the Orange flash screen and the Orange apps that came preinstalled on my phone. Some posts say it's possible, some posts say I will have issues with the radio version, some posts say I will loose wifi and the Desire will turn unstable (lots of force closed prompts). If I did manage to go back to the retail Desire ROM, would I then run into probs with OTA updates?
Sorry if this question is proper nooby, but in truth that's exactly what I am and I'm getting totally lost!! After hours of digging I thought I'd just post this up and see if someone can clarify the situation before I dig in and start flashing. Better to be safe than sorry and all that.
Any help would be appreciated!!
With an orange branded desire, you'll definitely have to unlock it - i did with mine, although i discovered that after i'd flashed it
the only think i would advise you to do is to read up on the various rom threads - the first couple of posts in each thread will tell you what each rom does and will invariably give you a couple of screenshots as well.
that way you can decide which one you want in the firsts instance. then i'd skip to the end of the thread and read back a few pages from that point, so you'll get an idea of what problems (if any) people are still having.
it really comes down to personal preference and taking a chance - most, if not all of the roms on here are working and stable and won't really give you many problems.
Yea its an eyesore to say the least is that filthy orange branding
get it debranded first using a goldcard and flashed with rooted generic rom
then purchase sim unlock code to use your o2.
then update and mod to your hearts "desire"
Firstly, thanks for your quick replies! I had a feeling this was going to be a bit of a mission!!
Ok, so say I've unlocked and unbranded my phone. What happens with OTA updates from there on in? Is it just a case of doing them manually and switching off auto OTA? I read somewhere that by flashing with a rooted ROM it will block OTA from updating to prevent the phone getting locked or becoming unstable, is that right?
Also, this may be a stupid question but if it's flashed to a generic HTC ROM then where does it contact for the updates? I was figuring as soon as I'd gotten rid of the Orange fw that it would no longer be looking for the Orange'd ROM update but after reading this doesn't seem to be the case?
Please forgive me if I'm being ignorant, I've gone from a Nokia 1600 (lol) to a HTC Desire and trying to get my head around it all!!
I would like to know too, I have just bought a Orange branded desire.
1. Do I unlock the phone 1st, ie. get an unlock code from orange.
2. do I then flash the generic firmware.
3. Is the sim lock stored in the radio part of the firmware?
I have unbranded/unlocked nokia n80`s and htc tync`s in the past, but I need to swat up on this linux stuff.
Any usefull advice welcomed, in the mean while I`ll keep reading
The OTA updates will become completely unecessary because you'll be using a custom rom - the developer of that rom will be the one releasing the updates, so all you'll have to do is to re-flash each updated version.
jedi134 said:
I would like to know too, I have just bought a Orange branded desire.
Click to expand...
Click to collapse
Well what I did was to root the phone first, then flash the radio and then a rom. the new radio is what caused the simlock, so it was at that point i had to buy an unlock code. all works completely fine now.
hankhandsome said:
The OTA updates will become completely unecessary because you'll be using a custom rom - the developer of that rom will be the one releasing the updates, so all you'll have to do is to re-flash each updated version.
Well what I did was to root the phone first, then flash the radio and then a rom. the new radio is what caused the simlock, so it was at that point i had to buy an unlock code. all works completely fine now.
Click to expand...
Click to collapse
So can the simlock be removed by flashing a simfree radio rom??? I`m pretty sure this is what i did on an old tync to remove simlock.....but this was some time ago
you say the radio Rom you flashed caused the simlock, did you not have to supply the network provider as well as the IMIE to get the unlock code? or was this a generic Radio rom?
My wife has just got a htc desire HD on 3 and that is branded.
I have got a Samsung Galaxy S and i have unbranded that down loading a Manufacture Rom and that updates as normal.
Is there some software like odin for the Htc and were like samfirmware.com can i down load a Manufactures rom.
she went for this phone cos of the spec and she does not like my Samsung i was hoping the Htc community would be the same it is so easy to do and Samsung service centres checked my firmware and it was fine.
Most people just want there phone as Htc intended it to be
HTC finally launched their Gingerbread update (2.3.3) for Desire. I am using a Desire (telstra locked Android 2.1), downloaded the new update from the official website HTC website and now i have a completely unbranded HTC Desire with 2.3.3... NO GOLDCARD OR ROOT REQUIRED.

[Australia] HTC 10 Australian

Hi guys,
I got my HTC 10 last week - phone is a big improvement from the m8.
I am running Telstra's latest firmware - Have s-off already...
Telstra's latest firmware is 1.53.841.6 with Leedroid ROM - have been trying to get VOLTE.
I never got VOLTE with stock because I rooted so fast and S-OFF and installed custom ROMs.
So I had to install stock system image 1.53.841.6, reinstall stock recovery and factory reset and VOLTE icon shows up instantly. Install TWRP and VOLTE remains. But if you install a custom rom and do a full wipe seem to lose VOLTE. Also have to have the telstra firmware to VOLTE to work, I tried with WWE and no go. Also had to ring up telstra as it wasn't activated. So if you are having trouble getting it - might be best to double check. Even though my provisioned flag was on. *#*#4636#*#* to check - tap phone info.
@xlrate reported not wiping data and installing VIPER was able to keep VOLTE. (Updated the customize folder in the rom with my Telstra back up, also the build prop to do this) Also TELST001 cid has to be on.
Has anyone got VOLTE working on a custom ROM on WWE Firmware?
So Aussies... Who's got their new HTC 10?
Update - 15/10/16
Thanks to @brantp for providing TWRP backups & OTAs
https://drive.google.com/drive/folders/0B6MWrHVBWC-xZlBQN1BqYUNPRW8
TWRP Backup (untouched System Image + Boot)
- 1.21.841.8 (+ Recovery)
- 1.53.841.6
- 1.80.841.1
- 1.95.841.3
Stock Recovery
- 1.53.841.6
- 1.80.841.1
- 1.95.841.3
OTA
1.21.841.8 --> 1.53.841.6
1.53.841.6 --> 1.80.841.1
1.80.841.1 --> 1.95.841.3
Firmwares- Refer to http://forum.xda-developers.com/htc-10/how-to/2016-05-27-fastboot-flashing-firmware-t3387520 for more info
https://docs.google.com/spreadsheets/d/1EdAHLDDxqf9jH65me_8bY9oXdaYusI0eedpwO6yUY2s/pubhtml
Thanks to @Sneakyghost
Roms- Leedroid, ICE and Viper now support Telstra with carrier support.
If anyone has any of the other australian carriers firmware please post and I will add them to OP.
15/08/16
https://www.androidfilehost.com/?w=files&flid=60869
Telstra RUU provided by @Sneakyghost - Will restore OTA's if anyone has broken them
12/03/18
Telstra OREO update
http://fotadl-az.htc.com/secure/OTA....48.841.31_release_519847tp9bagwfkglchg5u.zip
@Sneakyghost isn't doing the firmware updates anymore.
If you need to use the firmware.zip out of the OREO zip and need to a custom recovery either replace the recovery.img with twrp.img (rename it of course) in the firmware.zip - or flash one after installation.
I got mine about a month ago.. All I've done so far is root it.. (even after all these years, it still sounds wrong)
I normally run ARHD, but, Mike hasn't mentioned developing for the 10, so, I'm stuck atm, not really interested in running a massively modded ROM. But, last night the OTA notification popped up for 1.53.841.6.. So, I'm going to have to do something - the notification is annoying me. So, I guess I have to work out how to update it.
I hadn't even considered the VoLTE requirements.. I just assumed it would all work, even on a custom ROM. 4G did, I didn't think this would be any different.
Is VoLTE worth hanging on to? I don't really get it.. Is it like VOIP for mobiles?
Vampyric said:
I got mine about a month ago.. All I've done so far is root it.. (even after all these years, it still sounds wrong)
I normally run ARHD, but, Mike hasn't mentioned developing for the 10, so, I'm stuck atm, not really interested in running a massively modded ROM. But, last night the OTA notification popped up for 1.53.841.6.. So, I'm going to have to do something - the notification is annoying me. So, I guess I have to work out how to update it.
I hadn't even considered the VoLTE requirements.. I just assumed it would all work, even on a custom ROM. 4G did, I didn't think this would be any different.
Is VoLTE worth hanging on to? I don't really get it.. Is it like VOIP for mobiles?
Click to expand...
Click to collapse
I have had VoLTE working with Leedroid after I used the telstra 1.53 system/customize & parts of the build.prop on the 1.30 base... Haven't been able to get it working on 1.80 base.
Have had to use the telstra firmware for it work, doesn't work on WWE. So it is kinda a pain to get working.
VoLTE is better call quality and if you are on a call you can use LTE/4g to use the internet... Without VoLTE when on calls your phone 3g
EDIT - don't think OTA will work since you are rooted unless you went systemless root
I guess I don't 'appreciate' VoLTE as much as I should, because I rarely make phone calls..
Sadly, not Systemless root. So, I think I need to go back to stock, update and re-root. It's not something I've had to worry about before. So, it's kinda frustrating, and a little too complicated for me to totally understand.
I was going to de-brand it, and just run the WWE RUU.. But, maybe I'll wait for the 1.80 Telstra update and worry about it then.
I got rid of the notification
**Sent from a uranium powered typewriter**
Anyone experiencing an issue with NFC? While on stock 1.21.841.8 (and locked), worked without issue. Since updating to 1.53.841.6 (and unlocked), can't read my Opal card now ie no vibration, no sound, no anything. Haven't tested my tap & pay banking app yet (which did work without issue prior to updating).
Yes I also had and issue with NFC. Would not read opal card and was an absolute pain to try and read my Amex and Visa card.
Ended up getting another issue with it and returned the phone under warranty for NFC and the other issue.
Still waiting to get a phone back ?
Sent from my HTC One_M8 using Tapatalk
Yeah NFC doesn't work with mine now on 1.53.
I did get a vibrate and a sound when I was on earlier firmware but not now.
Just hoping that the 1.8 update fixes this stuff.......
pablo11 said:
Yeah NFC doesn't work with mine now on 1.53.
I did get a vibrate and a sound when I was on earlier firmware but not now.
Just hoping that the 1.8 update fixes this stuff.......
Click to expand...
Click to collapse
Thats if we get 1.8
I have a feeling we will miss that and get the one after that.
xlrate said:
Thats if we get 1.8
I have a feeling we will miss that and get the one after that.
Click to expand...
Click to collapse
Aparently they have stoped rolling the 1.80 update. Im on vodafone and there website has no update for the htc 10 so i agree that we wont get it
yldlj said:
Aparently they have stoped rolling the 1.80 update. Im on vodafone and there website has no update for the htc 10 so i agree that we wont get it
Click to expand...
Click to collapse
Tried reflashing the 1.53 firmware again (twice) to see if it fixes it, but it's still not working ie Can switch it on and off, but it does not respond to my opal card.
It's only taken Telstra until this month to push out 1.53, so who knows when (or if) 1.80 will happen. Now I'm trying to decide whether it's worth sending back for another handset or waiting to see if the next OTA will fix it. My biggest concern is that the replacement could be on 1.21 and I could possibly end up with the same issue all over again!
pablo11 said:
Yeah NFC doesn't work with mine now on 1.53.
I did get a vibrate and a sound when I was on earlier firmware but not now.
Just hoping that the 1.8 update fixes this stuff.......
Click to expand...
Click to collapse
I just tried to NFC on 1.53 and it isn't working very well, hardly at all. I got it to work 3 times in about 15 mins...
Previously I think when I was on 1.30 firmware it was working well before but just had to hold it near the head phone jack.
Any Telstra users want to test out the Telstra firmwares
http://forum.xda-developers.com/htc-10/how-to/2016-05-27-fastboot-flashing-firmware-t3387520
Make sure you back-up the rom & back up internal storage refer to later posts in that thread.
https://crowdsupport.telstra.com.au/t5/Device-Updates/Software-Updates-01-07-2016/td-p/585953 Telstra 1.80.841.8 firmware is coming 25-Jul
Leedroid is the best rom for Telstra users. Running it myself and working perfectly, now supports Telstra with carrier support & VoLTE working - thanks @LeeDroid
*Only works on Telstra firmware.
Install Ice yesterday (only got my phone Friday ), really like it over the stock rom.
Some people complained about the LED but I like it. My only complaint about my M8 was how bright the LED was specially in the dark when you're trying to get to sleep.
Another problem I'm having is file transfers freeze when using a USB 2 port on Windows 10.
I like my new M10 but not sure if I like it over the M8 as of yet. I preferred the speaker arrangement on the M8 and having the home, back buttons etc on the screen rather then down the bottom.
I have to admit I'm not a fan of the "Samsung" look at all which is why I bought HTC in the past to begin with. I didn't want to be a part of the flock.
Hey guys,
I'm looking to get the 10 but imported, could someone (especially looking for someone with Optus) check their box to see what specific model it is (e.g. 10h or 10u)?
Thanks guys
The Telstra model is a HTC 10h
ICE (InsertCoin) v2.0.6 supports Telstra also now too. Thanks @baadnewz
morgy59 said:
The Telstra model is a HTC 10h
Click to expand...
Click to collapse
Awesome, thanks morgy59
Found out that Telstra's policy for DOA/ELF replacements are within 30 days of purchase. Since a return will result in a repair, I'll wait to see if the OTA will fix the NFC issue first before sending back.
Has anyone experienced an NFC issue on Telstra stock, only to have it disappear after switching to a cusom ROM?
brantp said:
Found out that Telstra's policy for DOA/ELF replacements are within 30 days of purchase. Since a return will result in a repair, I'll wait to see if the OTA will fix the NFC issue first before sending back.
Has anyone experienced an NFC issue on Telstra stock, only to have it disappear after switching to a cusom ROM?
Click to expand...
Click to collapse
I found it worked perfectly fine on wwe 1.30 firmware using Leedroid. Now I'm on 1.53, hardly works at all
Sent from my SM-P605 using Tapatalk
It's doesn't read card on 1.53 on Optus build 710

Categories

Resources