http://www.google.com/gmm/mylocation.html?hl=en
Cell tower based location - poor man's GPS
Has anyone managed to get the new "My Location" feature working on their Excalibur? I have an S621 running Rogers' WM6 on Rogers network, and it doesn't work. At the bottom of the Help/About screen, it says "myl: N/A"
Anyone had success with any other OS builds and/or networks? It's supposed to support "most Windows Mobile devices". Is it the device that's not compatible, or is the network not sending cell tower info?
Works On T-Mobile's Network Perfect
MountainDrew said:
http://www.google.com/gmm/mylocation.html?hl=en
Cell tower based location - poor man's GPS
Has anyone managed to get the new "My Location" feature working on their Excalibur? I have an S621 running Rogers' WM6 on Rogers network, and it doesn't work. At the bottom of the Help/About screen, it says "myl: N/A"
Anyone had success with any other OS builds and/or networks? It's supposed to support "most Windows Mobile devices". Is it the device that's not compatible, or is the network not sending cell tower info?
Click to expand...
Click to collapse
Works Like a charm, on T-Mobile's network, it gives me my location to a "T", and got the blinking light too, poor man's GPS........!(lol)
work with dopod c720w roger wm6 rom
work very well on my dopod C720w. i use roger wm6 rom with singtel in singapore.
it works well if you've previously used it with a gps at your location. As soon as you move you'll find the accuracy goes way off.
doesn't seem to work in Ottawa Ont on the rogers network. I made a couple of calls to make sure there was a recent connect to a tower...no luck.
Worse than not working
Not only did the My location feature not work for me on my Dash running the T-mobile WM6 ROM but it crashed my Dash. I had to hard reset, and it took a few tries to get the phone to hard reset successfully.
Works fine for me on T-Mobile in the states -- thought I read initially that the current release for just for the U.S.A. ...?
Works very well in Kitchener on Rogers/Fido network. My actual location was within the blue circle.
Good way to find out where the towers are too.
I've never used GPS on my excalibur, and it works perfectly fine for me.
chaznet said:
Works fine for me on T-Mobile in the states -- thought I read initially that the current release for just for the U.S.A. ...?
Click to expand...
Click to collapse
I test in Singtel mobile in Singapore and AIS in Bangkok Thailand. Both works OK.
It worked perfect for me...maybe a little too perfect. It said that it could find me within 1700 meters of my actual location, and it did.
Did not work
I have a US tmo unlocked and setup for US att network. I get "error: connecterror [183]". Nothing on google seems to tell me what this is. I can go send/receive calls, go online and receive mms (following att setup per this sites board), but it always gives this error at load. Take sim out, same error, as if the software sees no connection settings when sim inserted. Ideas?
WTF I keep getting location currently unavailable. Whether it be in NYC, Connecticut or Rochester, NY. (T-Mobile Dash)
um the problem might be that you do not have a data plan or what not... or maybe you are not near a cell tower I am guessing... trying moving around or maybe try it next time you go to the mall or shopping (somewhere further from your house).
Me too
I just tried it on my Dash running AT&T's EDGE (US). I got a location that was supposed to be accurate to 2.1 Kilometers. It was closer to a kilometer. Not quite GPS accurate, but hopefully it should be nice next time I'm trying to help a friend navigate around Philly or some other big city I don't know my way around.
SurrealNetworks App Unlock
Hey guys all you need for google map "My location" to work on your T-Mobile dash you must app unlock your device with an application called SurrealNetworks App Unlock
This is the link where you can download the application.
http://www.mobile.surrealnetworks.com/AppUnlockReg.htm
Once you install this program my location should work perfectly, because this is what I did and it been working great on my Dash...
JAmerican said:
WTF I keep getting location currently unavailable. Whether it be in NYC, Connecticut or Rochester, NY. (T-Mobile Dash)
Click to expand...
Click to collapse
I had the same issue when I was on WiFi and was connected to my wireless router. Then when I turned it off and went for a drive it worked.
I honestly think this is useless unless your in a brand new city. I disabled this feature because it wasn't helpful in telling me were I was exactly. I'd rather take the 15 seconds and type the intersection in rather than the 25 seconds of looking around to see where I am according to the map.
Usually its more than 1700 meters for me. At one time it was in the wrong town.
Using a Rogers S621 w/Rogers WM6 ROM and My Location won't work.
amazing, it works !
Roger User Here - Works Perfectly Including MyLocation but it's inaccurate. it's very close to where i am but still not right - i guess you don't get everything you want lol
Related
I have a Orange SIM card which I got in Israel, I am now in Canada and that SIM works fine on my friends Nokia 6600, but when I try to use it with my XDA IIs I can't find any networks or anything. I am guessing its the GSM frequecy although the phone supports all of them. Does anyone have any idea what I need to do to get the SIM to work here? Does anyone know how to manually select a GSM frequency?
XDA IIs
ROM Version: 1.40.00 WWE
Radio Version: 1.15.00
Protocol Version: 1337.45
Hello psytech,
I believe you're roaming. Sometimes, you really cannot just plug your sim card then voila its working. If you are roaming, most of the time you really have to manually select the network.
anyway, i'm currently using windows mobile 2005, and no longer using windows mobile 2003 SE. i hope i could still help you or atleast you can see the pattern on how to do it.
here what you do:
1. click on the signal strength icon (the icon located on the upper right most portion of your screen just beside the speaker icon)
2. a dialogue box will appear with a clickable 'settings' button (located on lower left part of the dialogue box.), click the 'settings'
3. you will then see 3 tabs on the bottom part of the screen, 'phone', 'services', 'network'. click on 'network'.
4. you should find something like 'find network' button there, then just but before you click on it, choose 'manual' for network selection.
the rest is self explanatory, i hope i was able to help you. cheers!
You say your orange sim works fine on your friends nokia but does not work in your IIs.
Is it possible that your IIS device is sim locked as in will only work on the O2 network in the country you got it from.
If so unlock it via wiki (link in sig)
not it
I forgot to mention that the SIM worked fine in Isreal, my original SIM is orange (I do have an account with) I just can't get support cause I didn't buy the phone from them (capitalists).
About the network search. Thats what I've been doing for the last couple of days but I can not find ANY networks at all. which is what leads me to believe that its a GSM frequency problem.
What happens if you put your friends sim in your phone
GSM in Canada is generally 1900 http://www.gsmworld.com/roaming/gsminfo/cou_ca.shtml
doesn't work either
My friend's SIM doesn't work on my phone either. If canada is 1900, how can I make sure that my phone is currently using 1900. (I know it supports it, but how do I actually see that its actually scanning with it?)
What happens if you go to Settings->Phone->Network and then change Network Selection to Manual.
You should then get a list of networks. This will list all networks even if you cannot connect to them.
[edit] This has already be suggested earlier in the thread
If you do get some networks then the only reason that I can think of that you are not connecting is that under Prefered Networks you have a network selected that your carrier does not have a roaming agreement with.
Check your provider's website to see who they have agreements with.
no networks
My provider (Orange) has agreements with Rodgers, but my problem is that I am not listing ANY networks, I tried manual and even added the Rodgers network to my favorite networks, but when I try to search for networks I can't find any, I just get a blank window. This is very odd to me and I've never heard of anyone with that problem.
Like I've mentioned before, I updated my windows to TuMa 1.4 and my radio to 1.1.15. If there's anything else I need to do or anything I may not have done when I updated my network please tell me.
btw when I installed that TuMa windows I change my ID thingy to Tmobile.
Problem solved
Attenttion everyone:
It has come to my attention that there is a problem in the Band Selection CAB when it comes to certian cellular providers.
The problem so far appears on a Cellular One network that only supports 850Mhz. When the North American Option is choosen in the Band tab, the phone can not find a network to register on. I'm not quite sure why this happens yet, but there is a solution to fix.
http://relaysgoldens.com/sx66/ext_roms/BandSelect-fix.CAB
By installing this CAB, it provides a fourth option on the band tab, "Reset Value to Zero".
By selecting this option, the phone will be reset to it's default state, and will work normally.
I've trapped this as a bug in the 1.40.124 extrom and will be working to figure this out.
Note: the band selection setting is persistant, and will not be reset even if you downgrade the ROMs on the phone. If you are experiencing this problem, the ONLY way to reset the value is to use the CAB above.
-Chris
P.S. I've also updated the 1.40.124 RAR file on the website to include the updated bandselect CAB.
Click to expand...
Click to collapse
I found that at http://pdaphonehome.com/forums/showthread.php?s=&threadid=53121 and it worked.
I have an MDA C3. When web & walk is transferring internet Data and a call comes in, the phone does not ring. It goes directly to the voicemail.
T-Mobile customer service tell me that this is correct as you can either transfer internet data or make a call.
Is that right? I thought that was with WAP which is analagous to dial-up. Surely GPRS is analagous to Broadband.
Anyone else want to try this:
Go to Web & walk home page. Attempt loading up the guardian page (This will take a while). Whilst this is loading, call your phone number and see if it rings or goes direct to VM.
I spend lots of time browsing so I must be losing lots of calls!
Feedback greatly appreciated.
From what I have heard only UMTS devices can support simultaneous voice/data.
Yes - but not GRPS that uses GSM band instead of UMTS.
However, some devices have troubles keeping the data link active when a call comes in.
I am having the same issue (also on T-Mobile UK).
Then IE is running or AS is downloading my mail (I use direct push) all my calls go straight to voicemail.
This is worrying as I just moved over to T-Mobile for the web n walk package to allow me to have instant e-mails. This is a pain if it means I miss calls whilst my mail is downloading.
You'd think that the chances of the 2 coinciding are slim (I don't get a lot of mail, maybe 10 per day) but the wife has already complained 3 times since Friday that she went straight to voicemail, and each time it was exactly as i got a new mail.
Is this a limit of GPRS, the Orbit or just T-Mobile?
Thanks
Dae
I was surprised too... Thats why I posted the query. I thought my phone and/or SIm were faulty. But T-Mobile tell me thats how its supposed to work.
With W&W and Email, Its really hard for someone to get through with a voice call. It was worrying for me as I tend to browse the net whenever I am waiting around. This means that when I am on the bus surfing, no one can get through to me!!
Surely if there is a limitation, then the phone should give precendence to the Voice call. After all, you can pick up your emails or surfing where you left off.
I would really be interested to see if this is a T-Mobile only problem.
No itschase is spot on.
It's not a t-Mobile problem, it's the same for any GSM based network.
Only 3g (UMTS) phones can do data and voice at the same time. No matter what network you are on.
I have just run an experiment in the office as follows:-
Me (artemis with v3 black and blue) - Voicemail when data active
person 1 (MDA compact III - v3 black and blue) - Voicemail when active
person 2 (hermes) - no Voicemail when active.
We are all on t-mobile UK, and therefore it doesn't look like a network issue, but maybe a ROM problem?
daesimps said:
therefore it doesn't look like a network issue, but maybe a ROM problem?
Click to expand...
Click to collapse
What problem? Everything is working as it supposed to. If it's so important to you. Go buy a 3g phone!
I now fully appreciate that 3g phones are the only ones to support this type of behaviour.
I was trying to be helpful and post the results of my test as at that point I didn't realise that only 3g phones worked as such. I was lead to believe this by wikipedia:-
"Class B
Can be connected to GPRS service and GSM service (voice, SMS), but using only one or the other at a given time. During GSM service (voice call or SMS), GPRS service is suspended, and then resumed automatically after the GSM service (voice call or SMS) has concluded. Most GPRS mobile devices are Class B. "
Obviously this is not the case.
Bring on the HTC Kaiser!!!
Gajet said:
What problem? Everything is working as it supposed to. If it's so important to you. Go buy a 3g phone!
Click to expand...
Click to collapse
I incorrectly assumed that whilst browsing, if a voice call comes in, the phone would give priority to the call.
If I had known what I know now at the time I signed my 18M contract I would have bought a 3g Phone! Its just annoying that i'm stuck with it for another 12M. T-Mobile push the fact that they have set the internet free... but what they fail to get across to everyday users is that its "AT THE EXPENSE OF THE VOICE CALLS"
Because T-Mobile forced you to buy one of their 2.5g phones rather than one of their 3g phones?
I have no problem receiving phone calls while browsing the internet on the P3300.
cduijker said:
I have no problem receiving phone calls while browsing the internet on the P3300.
Click to expand...
Click to collapse
Neither have I to be honest, the issue only arises while you are actively downloading data. However once the website has loaded, you are free to accept calls again whilst still looking at the site in the browser.
Gajet said:
Neither have I to be honest, the issue only arises while you are actively downloading data. However once the website has loaded, you are free to accept calls again whilst still looking at the site in the browser.
Click to expand...
Click to collapse
As a test I started downloading a dummy 32MB testfile on my P3300 (from speedtest.bbned.nl) and I called my mobile with another phone.
There was no problem; I received the call while downloading the file.
Maybe it depends on the operator? I am in Holland on T-Mobile
daesimps said:
I now fully appreciate that 3g phones are the only ones to support this type of behaviour.
I was trying to be helpful and post the results of my test as at that point I didn't realise that only 3g phones worked as such. I was lead to believe this by wikipedia:-
"Class B
Can be connected to GPRS service and GSM service (voice, SMS), but using only one or the other at a given time. During GSM service (voice call or SMS), GPRS service is suspended, and then resumed automatically after the GSM service (voice call or SMS) has concluded. Most GPRS mobile devices are Class B. "
Obviously this is not the case.
Bring on the HTC Kaiser!!!
Click to expand...
Click to collapse
Hi,
It's not enough to have a class A (2G) device, but also DTM (Dual Transfer Mode/Simple Class A) support has to be active in the specific network, otherwise only 3G device on 3G network will provide Class A (simultaneous voice & data).
In fact, there are quite many models from Nokia during last year that support DTM, but as already mentioned, it's not enough.
FYI,
Zohar
cduijker said:
As a test I started downloading a dummy 32MB testfile on my P3300 (from speedtest.bbned.nl) and I called my mobile with another phone.
There was no problem; I received the call while downloading the file.
Maybe it depends on the operator? I am in Holland on T-Mobile
Click to expand...
Click to collapse
Is that an EDGE network ?
I got the Artemis with PV Black&Blue v3 ROM.
I can receive calls while pages are loading in IE.
I think this is a provider problem.
The phone provider has to intercept your GPRS connection and establish the GSM connection. Maybe T-Mobile just rejects calls while a GPRS connection/transfer is active.
A1 intercepts the page download and my call comes in.
When I pick up, the GPRS connection is closed completely. (not just pending)
So receiving calls while surfing is no problem for me with Austrian A1 provider.
Any other experiences?
Gajet said:
Is that an EDGE network ?
Click to expand...
Click to collapse
no, just gprs; no edge.
cduijker said:
no, just gprs; no edge.
Click to expand...
Click to collapse
...then it's no way you'll get simultaneous voice and data (class a).
Hi all
I experienced some problems since I upgraded to WM 6 (official Tytn Europe Version)
If there is a active Datatransfer in HSDPA Mode, i cannot make or receive a phone call. I already tried several Radio Versions (1.43/1.48/1.50), but no success. When I disable HSDPA, it works fine.
Does anybody has same issues with HSDPA?
Thanks
Marc
Vodafone issue
Hi - are you using a vodafone network? I know that there are issues on the network that are preventing some operators from supporting voice and data at teh same time over HSDPA....
The operators I know about are planning network upgrades or patches to solve the issues (which are not just limited to Windows Mobile devices apparently)
I can make calls -> versions below I don't think this is just a phone issue though. I think some operators can't do it.
I have the same problem as you have.
It is because of the infrastructure of my provider KPN that I have this problem. When I disable HSDPA then all works fine. So no I only use HSDPA when I want to browse on the Internet.
****ty but now I know why.........
Hi all
Thanks for the confirmation.
I also disabled HSDPA for now.
Now I will the push the guys in the network department to fix this issue......
Just got the answer from the tech guys. Operators with Ericsson UMTS/HSDPA Network Equipment are affected by this. The Operator has to rollout a software update to fix this issue.
Cheers
Marc
I am on AT&T and have never been able to do data and voice at hte same time.
I'm on At-T in Nyc and my HSDPA works just fine calls while on data and vice versa
I'm in South Florida and I'm constantly using Internet Sharing in HDSPA mode while talking on my Jawbone... (takes "jawbone of an ass" to a whole new level, ehehehe!)
Dr Puttingham said:
I'm in South Florida and I'm constantly using Internet Sharing in HDSPA mode while talking on my Jawbone... (takes "jawbone of an ass" to a whole new level, ehehehe!)
Click to expand...
Click to collapse
OK, now THAT is the funniest thing I've read here! Thanks for the laugh!
I saw the jawbone at the ATT/Cingy store and wondered if I should splurge on it since I already have an H500 and an H700 from Motorola. My problem is I ride bike a lot and the wind noise makes it impossible to have a conversation with an H500. It is possible but a little difficult to talk while riding using the H700. I was wondering if you had any experience with the Jawbone under similar conditions?
Regards,
George
OOPs - That was meant to be PM, sorry folks!
The Hermes is able to do both. Phone calls and data (HSDPA\GPRS\EDGE) at the same time. Your data speed does take a hit due to bandwith.
However if you cannot is because is 99.999% the network NOT the phone. I had a Hermes long before the network here in Canada supported HSDPA. So I could only do one at the time. At the beginning of this year they finally updated it and I have been doing both at the same time with wild abandon no problem.
Check with your provider.
@gmgonzal - the Jawbone will probably be the best you can find for your enviroment. I only use it in my Toyota when driving. People can't tell that I'm on a cell phone. I had a NxZen which I liked for a while but this is better, IMO.
@agovinoveritas - indded, that's the biggest reason I upgraded to the 8525... no more missed calls when I'm using the internet (or receiving an email at the same time..)
It's the network. All operators that use Ericsson 3G equipment suffer from a bug in the Ericsson kit that prevents simultaneous data/voice. All Nokia equipment works fine. T-Mobile in the NL use Nokia and have no issues. KPN and Vodafone NL use Ericsson and have this issue. KPN are currently upgrading their Ericsson equipment to correct this issue (ETA end 2007). I do not know about Vodafone NL. It is safe to assume that in other countries these providers use the same kit so you should be fine with TMO, regardless of where you are.
Does this issue include that my telephoneconversation can be disconnected?
I had this problem with the WWE WM5 HTC rom using the Vodafone NL network. Now I have uograded to the Dopod WM6 ANZ version it's all fine...
All:
I just got a Cingular 8525 and immediately upgraded it to WM6 (it had WM5 on it for about an hour). I am in a 3g covered area but I do not think I am getting a 3g connection on the phone. I have the big upper case U in a box, and then I have the signal indicator with an E over it. This makes me believe that I am connected to Cingular's edge network. Also, if I am on the phone and I try to run a sync with activesync the phone tells me that I have a voice call in progress. Any suggestions? AT&T support was clueless.
sk7575 said:
All:
I just got a Cingular 8525 and immediately upgraded it to WM6 (it had WM5 on it for about an hour). I am in a 3g covered area but I do not think I am getting a 3g connection on the phone. I have the big upper case U in a box, and then I have the signal indicator with an E over it. This makes me believe that I am connected to Cingular's edge network. Also, if I am on the phone and I try to run a sync with activesync the phone tells me that I have a voice call in progress. Any suggestions? AT&T support was clueless.
Click to expand...
Click to collapse
The U indicator is UMTS - that is 3G. However, most of the newer ROMs replace it with a 3G icon. What ROM did you use? Anyway, also, you may try the reg tweak to enable the BAND tab in the Settings > Phone menu. You can find that tweak in the wiki.
todd_jg said:
The U indicator is UMTS - that is 3G. However, most of the newer ROMs replace it with a 3G icon. What ROM did you use? Anyway, also, you may try the reg tweak to enable the BAND tab in the Settings > Phone menu. You can find that tweak in the wiki.
Click to expand...
Click to collapse
I have the same thing with my rogers phone, what I'm guessing is the phone is designed to pick whatever signal is strongest, (which is usually Edge) and not often-rescan for UTMS/3G.
If you google and download Band Switcher, you can force UTMS/3G at your leisure.
I wasnt aware the USA had 3G yet? I was always told that Edge was the best they had out there from a few mobile operators in the UK.
What Radio stack are you using?
Cingular, now known as "The New AT&T (AT&T)" has 3G up and running in some of it's markets.
No one seems to be answering this question.
Starfury said:
I wasnt aware the USA had 3G yet? I was always told that Edge was the best they had out there from a few mobile operators in the UK.
What Radio stack are you using?
Click to expand...
Click to collapse
We have quite a bit of UMTS and HSDPA coverage here in Massachusetts on Cingular/AT&T.
I was hoping this would be easy, but so far no such luck...
I have a Rhod400 (Sprint World Phone) that works good at home in the USA on CDMA with both WinMo (custom ROM) and XDAndroid.
We are on a family vacation for the next two weeks in Denmark so I figured I would pick up a pre-paid GSM SIM and have local phone/data service.
The phone portion works OK, but I'm not having any luck getting GPRS data going.
The provider is Lebara and I positive I've correctly set up the APN info as it's documented on their website.
I've tried with both the stock RIL and the newer RIL written by hyc. I've also tried the .39 kernel, but that seems to lock up as soon as it gets a signal lock.
I only want data because my kids would like to do some geocaching while we are here (huge bragging rights no doubt).
Any ideas that can push me in the direction of a combination that might work under these circumstances would be most appreciated.
I'm not afraid of digging around in a shell if that's necessary.
You don't mention if data works in WinMo on this "Lebara" provider's network.
If you can't get data in WinMo, I'd say your chances in Android are 'slim-to-none'. You're also sure the prepaid SIM has a data pack, it's not voice-only?
arrrghhh said:
You don't mention if data works in WinMo on this "Lebara" provider's network.
If you can't get data in WinMo, I'd say your chances in Android are 'slim-to-none'. You're also sure the prepaid SIM has a data pack, it's not voice-only?
Click to expand...
Click to collapse
Great minds...
I don't have data in WinMo (checked after I posted).
They definitely have data service, it's 49 DKK (about $10) for 1GB.
After digging through their website in minute detail it appears I need to enable data via their website. But web access requires them mailing (actual postal letter) you a password. I'm going to call customer service in the morning to see if they can enable it for me, otherwise I think I'm screwed.
As always, arrrghhh with the right direction. Thanks!