Is Schaps (ROM) revertable? - 8525, TyTN, MDA Vario II, JasJam ROM Development

Hi.
My TyTN is running Schaps 4.01 and is experiencing some troubles running Skype as well as having a hard time launching Contacts - which is a memory leak problem due to RandomAccess .
Anyways, A freind's TyTN which runs Schaps 3.54 ROM, does not experience those problems, and so, I would like to downgrade my TyTN from 4.01 to 3.54
Is that possible?
Are there any special actions need to be taken prior flashing the ROM?
Amit.

As far as I kown, there is nothing to do. Just flash your TyTN to Schap's 3.54.
Can someone confirm just to be sure ?

thats right...
you can flash any rom...

Related

1.40 ROM for XDAIIs

Does anybody have a copy that I can have which involves not messing with and that I can flash to my XDAIIs with no country error and no o2 stuff on it so it looks like the i-mate :?:
erm...................no
1.read the wiki
2.read the wiki
3.read the wiki
if above dosnt work try contacting your doctor about your brain......
lol, yeah, please read the wiki, you cannot go wrong, just follow the simple instructions, dont worry, you WILL be fine, if you get a country error then dont worry about that either, just keep trying, 8)
we have faith in you man!!!
8)
Dude do what this say's.
I've just done it: UK XDA IIs, on Orange network, running i-mate 1.40 ROM.
Slightly going OT...
I am quite keen to do the upgrade from my standard O2 XDA2s 1.31.00 WWE ROM, but I am a little unsure on what 1.40 ROM to download from WIKI. I think I need:
i-mate 1.40.176
I know my device is a Blue Angel, Rom as above, extended ROM as 1.31.139 WWE
Can anyone confirm the correct download please?
Also, has anyone had any problems installing on XDA's the same as mine?
I have read the install tutorial, but would like to get an idea of if I am going to run into problems.
Oh, one more thing... What advantage does ROM 1.40 have over my existing ROM apart from bug fixes (oh please! daily lockups!!!)?
Many, many thanks.
O2 XDAIIs Upgrade
I used the i-mate 1.40.176 upgrade for my O2 XDAIIs. All in all its pretty stable, with only the Bluetooth stability (memory issues and BT Manager & Settings "disappearing") as the main issue. Much better than the O2 1.31 ROM (will they ever get that 1.40 update out...!?) You will need to use the "MAUpgrade" rather than "BAUpgrade" utility, as the 1.40.176 ROM was built for the i-mate rather than the xda2s.
One problem I did have with this ROM at the start, was that GPRS would not stay connected. This seems to be a sporadic problem among those that upgrade, but if you experience it after upgrading to this ROM, you can correct the problem by replacing the "CallerID" cab in the extended ROM with the older version (1.17) This version of the file is available on wiki also. This will involved unhiding and unlocking the Extended ROM and replacing the file. Look at the wiki instructions under Blue Angel for "Cooking Your First Extended ROM" That said, you may not experience this problem, so upgrade the ROM first and see how it goes.
All in all a much better ROM. I am trying the new O2 Asia WWE ROM with a modified extended ROM and this is also pretty good. Slighty better Wi Fi switch on and off in my opinion. This one is on wiki also, but you will probably need to "cook" the extended ROM here a bit more than the 1.40.176 version.
Hope this helps
Chris
Anybody tried the imate 1.40 rom on O2 XDA IIs purchased from Singapore?
I am facing problems to using any 'Today Plug-ins' like IP Dashboard, O2 Plus beta, Lexisgoo English dictionary etc. The problem is after say 30 minutes or after more, my keyboard input will only be selectable, cannot select CE-Star chinese keyboard or Intellipad.
What do I have on my O2 XDA IIs?
1. CE-Star
2. Intellipad and Intellidialler
3. Lexisgoo English dictionary
4. SKTools
5. Sprite backup standard
6. Cal89A calculator
7. MDict 1.21
and many more.
Please help anyone.
Thanks.
my exerience with this device and all the ROMS has been that the fewer Today plugins you have the better. SPB Pocket Plus V2.5 caused a lot of lock ups. Not sure about new version 3.0 Seems multiple Today plug ins cause conflicts. Hard to pinpoint all the interactions and what affects what... Not much help I am afraid :-[ I would just try to keep them to a minimum.
Regards
chris
You said it man!
I'm down to zero 'Today Plug-ins' now and it seems to keep my IIs from needing to 'soft reset'.
Any others from Singapore who had used the Imate 1.40 rom?
Two major problems that I am facing with 1.40 ROM include:
1. wifi can't be connected after disconnecting GPRS.
2. bluetooth problem (memory error) or storage card disappear after disconnecting BT.
Anybody experience these?
Cheers,
zard said:
You said it man!
I'm down to zero 'Today Plug-ins' now and it seems to keep my IIs from needing to 'soft reset'.
Any others from Singapore who had used the Imate 1.40 rom?
Click to expand...
Click to collapse
Me !!
I had used the Imate rom before but, there has been many casses of terrible lag. When i updated to 1.40 and radio to 1.13 wooo... just very very fast...
Installing the latest Pocketplus with my 1.40 ROM makes my device hard-reset itself.
I need a way of getting IE to be able to save pictures. Anyone know of an alternative way to do this?
I have no problem with pocketplus 3.0.
Which version you are using?
1.40 ROM has serius today screen problems with me too (That's why I still use 1.31).
I have no problem with pocketplus 3.0.
Which version you are using?
Click to expand...
Click to collapse
My ROM configuration is in my sig.
The SPB pocketplus version is: v3.0.0.3652
I really want the mods it offers. (particularly 'save picture as' in IE).

Advice on WM5 rom and AKUs..

Hi All,
I have been in and out of this forum for sometime and don't consider myself a newbie with doing upgrades etc but I have missed alot of discussions on rom versions and fixes that arise when reading through very long posts.
To this end, could people advise me with the following as I want to use the latest aku for wm5 (tried helmi's crossbow but had freezes though believe this because should use radio 1.13 not higher) that i can to get a reliable jasjar phone but some of the features that AKUs give:
1- tried helmi's aku3.5 v1.31 vanilla and although good, i lost phone abilities after soft-reset and one usage of dialling/sms sending. Perhaps i should use radio 1.13? Anyway, not keen on this rom as when i type a contact using dial-pad no names appear
2- so shall i use Jwrightmcps aku3.2 which comes with radio 1.13.. is it fully functional? I think i have sussed that everything works with aku3.2 but higher than that and some things "break"
3- or helmi aku3.3 v1.2, but which radio should i use for this?
Appreciate responses for all those who have used these roms and been following the threads while I have been away. :-D
use helmi aku3.3 v1.2 and radio 1.13
-just like having crossbow with video calling
-take my advise.. it's the best.
thanx for reply. I had just done that before noticing your post. I noticed though that there wasn't any extended rom (mine is empty still from helmi aku3.5 1.3.1) so thought this might be vanilla rom? Phone is tad sluggish now in comparison but seems to function in all areas. Has VJbigphone been implemented into systray for easy access if i used hi-res? reason i ask is that the hi-res tool doesn't seem to be on the phone so i'm guessing its optional..
my mistake.. found OzVga in the extras folder..

Mapking does not seem to run on WM6

Hi, I have not been able to get Mapking R10, R12 or 2007 to work on WM6. I have tested it with LSVW, Black 2.x, 3.x and also WMXL.
I read a post here that the person got it working with 1.38 radio but I have tried all 4 variants of 1.38 radio and it does not seem to start.
I get the splash screen then it goes back to my wallpaper.
hope someone might be able to help. thanks
Hi Joej,
Mapking 2007 working on my WM6 since LSVW was launched in the forum (this is the first i flashed to my rom) till now with other like ELF 2.0, DYMOND etc. I think you might have problem with storage card. It happened once on my HP RW6828. I did hard reset and cleaned MAPKING folder on the storage card then it works!
__________________________
DOPOD 838 PRO
CUSTEL 2.5
Radio v1.40.00.30
SuperCID
Mapking Thailand runs on Black 3.0 and 3.5 overhere...

D810 WM6 Upgrade on P3600?

Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks
hi,
i have try to update my HTC P3600 with the oficial D810 WM6 rom!!!
result: i brick my phone!!! the rom update has stopped on 35%, and the PDA stop responding.
just recover it and go back to old ROM!
i will do it!!!
No problems to up and down
Hi, I upgrade to official ROM and any problems occurs, but I prefer PDAVIET Rom, then I downgrade the ROM and upgrade Radio to 1.46.30.11 and have all so far so good!
I hated everything about this ROM including the constant freezing of my Trinity. After 2 days I went back to AXEL's ROM and haven't looked back.
Updated yesterday morning with Dopod WM6 ANZ Rom and radio 1.46.30.11, and for me, it's paradize now...
Thanks for the replies! Anyone else with a positive experience?
I had problems with data connection with the ANZ Rom and Radio 1.46.30.11. Keeps disconnecting from the network Edge/HSDPA--could not use PIE or download email. However, with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.
thomastran said:
. . . with the SEA Rom and Radio 1.46.00.11 I had no problem. I think it's a Radio issue, at least for me on the USA Cingular/ATT network.
Click to expand...
Click to collapse
That brings up a good point. Has anyone tried this ROM on T-Mobile USA?
Fast and stable
I have the new aussie rom and the new radio rom 1.46.30.11 and it works perfect really fast and stable everything works...i am happy with it...
For those who successfully upgraded their P3600 to WM6, what technique did you use?
I tried doing a straight flash with ANZ ROM and was not successful. During the upgrade, the process stopped at 28%--similar to what some people have encounted. I got a screen with the new Bootloader 3.03.0000. In order for me to get out of that, I reflashed with a previous cooked ROM. It didn't flash through, but it did reset my Trinity.
While my Trinity is not BRANDED, I found that using the "HTC Trinity SIM CID Unlock" allowed me to successfully flash to the new ROM. I entered the device into the previous bootloader version 1.07.0000 prior to flashing.
As I've mentioned before, I had trouble with the radio version 1.46.30.11 with USA Cingular/ATT. I ended up using the SEA ROM with radio version 1.46.00.11 to flash the second time around.
PGMMA said:
Would P3600 owners who have upgraded to the D810 WM6 upgrade please post their experiences here.
ie:
Did you run into problems doing the upgrade?
Did everything work properly after the upgrade?
Was it worth it or did you (or want to) go back to WM5?
Thanks
Click to expand...
Click to collapse
Last night (14/7), I have upgrade my D810. No problem. According to the Guide, don't forget to take out MiniSD, battery is charged at least 50%, etc. In general the softwares for WM5 (Microsoft reader, Pocket e-Sword, Kevtris, etc) are compatible with WM6. Bass sound is good. I like WM6.
Thanks Thomas,
That's great information!
generally worked fine for me. I think mUns TE was more stable, but the battery discharging was annoying.
However a few issues:
1) Password for the web connection (GPRS) has vanished once or twice
2) Seems to lose GPRS data conenction once in a while
3) Biggest issue- the DEVICE ID has changed. This has messed up my TomTom Traffic subscription and TomTom support want a letter to prove this happened. ffs.
4) I think the main memory leaks away....
I finally decided to give WM6 a try on my P3600 but installed AX3L's all-in-one v2.0.8.1 ROM. It works well on T-Mobile's USA's network and is easy to install.
if the original rom gets stuck, what i did was flash to the original WM5 then reflash to the WM6 version.
I upgrade my D810 to WM6 and it cannot receive phone call using China mobile SIM card, used to work for the previous ROM update.

Looking for WWE WM6.5 Naked Rom

Hi,
I'm really looking for a WWE WM6.5 Naked Rom for the P3600 Trinity
Not interested in many apps or fancy menu's (I usually disable any menu pluggins such as QMenu etc.)
All I would like is:-
Plain Boot Loader Maybe with wording such as "P3600 - Trinity"
Calc
Calendar
SMS
FDC Soft Task Manager
RegEdit
CorePlayer (TCPMP)
QuickGPS
TomTom Navigator 7.450
Current System Setup:-
CE OS 5.2.21215 (Build 21215.5.0.0)
Processor - SC32442A-400Mhz
Rom Version: 3.00.707.18
Rom Date: 04/18/09
Radio version: 1.56.70.11
I use a company sim which doesn't allow data in anyway (no MMS / No 3G / No GSM) only through the USB / Wireless / Bluetooth.
The reason I ask is because the rom i'm using seems to have a memory leak, and needs daily rebooting.
I currently use the AthineOS on the TyTnII and quite like it.
I have tried many roms, and although they work reasonably well, I could do with something a little more "personalised"
Many Thanks,
Wayne.
Too scared to cook, not afraid to test and naturally cheeky!
Devices:-
WM 6.5-
HTC TyTn II
HTC Trinity P3600
WM 2003-
HP Ipaq 6340
HP Ipaq 6515 (Beetle)
HP HW2210
Trinity WWE / wm6.5 build 215725 Lite
Try the followed rom
Trinity WWE / wm6.5 build 215725 Lite
thai rom in english
its lite version
link
http://www.mediafire.com/download.php?2irgtzytjgc
just downloading now - thanks!
Just loaded the rom.
Looks quite nice.
seems very stable without any glitches
I will report back, but at the moment it seems stable and fast - even when i install TomTom7
I downloaded the file but when I run it, after my phone reset, the software said "Could not connect to PDA" and stop upgrading.
Can someone help me?
Thank
Hi, I'm gonna try it, and then I'll give my opinion.
Thanks.
Ricky
tudn said:
I downloaded the file but when I run it, after my phone reset, the software said "Could not connect to PDA" and stop upgrading.
Can someone help me?
Thank
Click to expand...
Click to collapse
Did You get install the ROM? Or it was when you were up dating it?
ricky chan said:
Did You get install the ROM? Or it was when you were up dating it?
Click to expand...
Click to collapse
After all step of checking ROM version, start updating only (0%), my PDA reset and error.
I don't know why.
tudn said:
After all step of checking ROM version, start updating only (0%), my PDA reset and error.
I don't know why.
Click to expand...
Click to collapse
i assume that you use an official rom or you have flashed official spl.
read this and this
Hi arnooo
I try this rom but camera don't work... you know how?

Categories

Resources