Currently share files on my latop and pc through a BT Home hub.
Now got an XDA and want to be able to access my laptop files and PC files from my XDA through my homehub.
Have pinged my XDA in Comd prompt from my laptop so I know that is working.
Have tried in my XDA file explorer to open path using the format //Desktop_Name assuming my desktop name is my laptop or computer name found in system settings.
That comes to nothing though and after trawling the net for ages have had no luck.
Do I need to set up a VPN? If so I have no idea how to do this. BT Home hubpages are no use.
Can anyone help me please!!!
Maybe you should check firewall settings on your hub. Some WiFi routers allow traffic on ping ports but disallow on other ports. Additionally try to explore your PC with IP number, not name (\\www.xxx.yyy.zzz format) using Total Commander.
Good luck,
yeap, I've tried that, but it still says i cannot access the server. firewall settings seem ok. Surely it must be possible to link up wirelessly with my PC???
can anyone offfer further help??
Try to turn firewall on laptop completely off for tests. I remember there is WM version of ping - install it on PDA and tray to ping laptop to be sure that PDA -> laptop traffic goes without problems. Then make network share on laptop and try with Total Commander again.
so basically i need total commander on both my PC and latop??
no just the pda
though total commander is a very nice browser on pc too
i've been using it since windows 3.11
Yeah, I geuss what i am after is a bit of step by step direction on what to di. I am new to all this and have an ok knoweldge of computers and setting up networks etc. However i am still none the wiser.
1. I have dowloaded Total Commander, but need to register. In saying that I am not sure where to place the registry key. Dont want to frag my PC
2. Have checked my firewall settings for the home hub and in my McAffee sfotware. All seems ok.
still none the wiser how to set it all up. Do I install the total commander .exe to the PDA direct?? Dunno!
Please can someone help me step by step. Its got to be worth a beer or two ;-)
If you want to access you pc by BT then just go to "Start"->"Programs" and run "Bluetooth Explorer" make sure BT on you pc is enabled. After running BTexplorer there will be a popup on you pc asking for folder to share/save files.
the pocketpc total commander exe is an activesync install which have to be run on the pc
Related
HI! After I flashed my TyTN second time, Active Sync on my home computer and my work computer detect the phone and freeze with "Retrieving settings" dialog.... I thought it has something to do with the phone, but on any other computer that I not synced before , my laptop or new xp and vista instalations on other partition on my home computer(same computer and same cable, and same software installed!) it sync perfectly.
I tryied to find any residual registry or files to delete (i delete the profiles in document and settings) but can't find anything to solve this. I tryied reinstalling Active Sync 4.5 but donst help either.
Active Sync troubleshooting dont solve anything.
Someone know a workarround o what files can be creathing this ?
What do Active Sync while displaying "Retrieve settings" ?
Go into Start>settings>connections>usb to pc
untick the box...then try.
Thanks but dosn't help. Cannot enter that option, and I can sync on others pcs and other o.s. (in another patition) on the same computer without changing anything on the pocketpc.
I googled and found lots of peobple with the same trouble and no one find any solution.
PS: I dont have any firewall and tested switching off all networks interfaces. I can ping the pocktpc assigned ip perfectly.
shagratt said:
Thanks but dosn't help. Cannot enter that option, and I can sync on others pcs and other o.s. (in another patition) on the same computer without changing anything on the pocketpc.
I googled and found lots of peobple with the same trouble and no one find any solution.
PS: I dont have any firewall and tested switching off all networks interfaces. I can ping the pocktpc assigned ip perfectly.
Click to expand...
Click to collapse
delete mobile device
under file
rickwyatt said:
delete mobile device
under file
Click to expand...
Click to collapse
Where it must be that folder? I don't find any mobile device folder on my disks
I deleted the "mobile favourites" now. i have missed that one before. But still the same Hang...
When you make a "asociation" to that pc (not being a guest). Where it store that information ?
mrvanx said:
Go into Start>settings>connections>usb to pc
untick the box...then try.
Click to expand...
Click to collapse
Works for me (HTC Wizard, WM6, ActiveSync 4.5), thanks
i'm trying to connect my tytn to my girlfriend's laptop. it doesn't obviously have ActiveSync on it. Last year i could get it to work with wireless modem application, but since i've installed WM6, i can't use it anymore. moreover, when i try to connect it to pc with Internet Sharing i get a "generic RNDIS" hardware detection message, and i do not own this driver. i'm on vacation and i don't know how to do it, so any help will be appreciated. thanks in advance
That driver is part of activesync i think so you'll need to download that...
Cheers,
Smiffy.
What you coul do to avoid active sync setup is to copy program files\active sync on the girlfriend's computer. When windows asks for the driver till him to seek in the copied directory.
After you get the driver setuped you can safely remove the copied directory
fun_key said:
What you coul do to avoid active sync setup is to copy program files\active sync on the girlfriend's computer. When windows asks for the driver till him to seek in the copied directory.
After you get the driver setuped you can safely remove the copied directory
Click to expand...
Click to collapse
Nice tips!
nice! but i can't get any activesync folder as i'm far from home.thanks anyway for the precious suggestion
Hi,
I want to access a samba share in my home network. I have a lan-storage device (dlink dns323, static ip 192.168.XX.XX) connected to a wlan-router.
When I activate my wlan on the xda orbit, I'm able to open web-pages and download gps-data for quick gps. Xda orbit is getting its ip via dhcp. As dns I defined the wlan-router.
So how can I access the share "folder1" at the dns323?
I tried this in totalcommander:
\\[email protected]\folder1
--> Error 53 while connection!
Similar in File Explorer:
\\[email protected]\folder1
--> Network ressource was not found or you do not have access rights.
From a desktop pc or laptop inside my home network I can connect to the share as user1. Without the [email protected] statement --> same result.
Can anyone help me?
Kind regards, hqqh
Hi,
now I installed z2 PocketLan. When I scan my network, my NAS (DNS323), wlan router and my linux server were found. But when I try to connect using group name user name and password the error message: "Network path not found." is printed. This happen when I try to connect to the NAS and the linux server (smb server is running).
I'm happy about any help.
Kind regards,
hqqh
fwiw I could only get network sharing to work when i addressed it via name ie.
\\device\sharename rather than \\ipaddress\sharename.
Hi,
thank you for your hint. I tried to connect vi Internet Explorer by device name:
"\\DLINK-EE2EBC\folder1"
But when I press ENTER, the address is substituted by "file://\\DLINK-EE2EBC\folder1" and the error "Network path not found" appears.
How can I configure my device, so that it will access the LAN and not local files?
Kind regards,
hqqh
Do you have the (Start -> Settings -> Connections ->) Network Plugin installed and configured?
I've exactly the same problem, i have an Artemis P3300 and already tried everything. Also configuring the network plugin. But the plugin won't connect to my lanbox...
When i refresh the Networkneigbourhood, my lanbos can be found, but i can't tap on it (i can by my other computers in the neigbourhood). Maybe it is a problem with the firmware of my lanbox? But under WM5 everything was accesable.
hqqh said:
Hi,
thank you for your hint. I tried to connect vi Internet Explorer by device name:
"\\DLINK-EE2EBC\folder1"
But when I press ENTER, the address is substituted by "file://\\DLINK-EE2EBC\folder1" and the error "Network path not found" appears.
How can I configure my device, so that it will access the LAN and not local files?
Kind regards,
hqqh
Click to expand...
Click to collapse
when i enter a \\network\share link in IE, it gets redirected to file explorer and a blank IE window says open with file://\\device\share in the address bar. Have you tried file explorer or total commander?
also i have no settings set on the network plugin page, isnt that for sharing out your wm?
Hi,
@chiel80: You mean it is an WM6 problem? Do you know whether it is possible to update the operating system without affecting the installed software?
@mc1: Yes it tried totalcommander and file explorer. The network plugin shows the same behavior like chiel80's device. All network devices were found, but no shared folder is available. Same in the tool called pocketlan.
I dont know what I can do. Is there anyone how can access shared folders via network?
Kind regards,
hqqh
Hello,
I have the same Problem. I have tryed with PocketLAN, Resco-File-Explorer, HTC Network Plugin and Total Comander and it cames the same Problem. With Windows-Sharefolder its worked very fine. But I have Problems with my NAS-Server (Buffalo Linkstation) and my DreamBox, boths are Linux-Devices. Before I flashed my HTC Kaiser, its worked with my NAS. But after I flashed my Kaiser then the Problems has beginn. I think its a Windows Mobil 6-Problem. What can I do?
WM6 Firewall?
Hi,
I still have the problem, that I can't connect to samba shares via WLAN. I as said above, I can send pings to my linux server and I can send pings from the server to the xda orbit.
I noticed that if I connect to the samba share from e.g. another linux or windows pc, a log file is created under /var/log/samba on the server. But when I try to connect with the xda orbit, no log file will be created.
So is it possible that WM6 has a firewall, which blocks the samba ports (137-139 I think)?
I have done a port scan of the xda orbit an got the following result:
-----------------------------------------------------
Starting Nmap 4.03 ( http://www.insecure.org/nmap/ ) at 2007-12-29 10:45 CET
Interesting ports on noname (192.168.XX.XX):
(The 1645 ports scanned but not shown below are in state: filtered)
PORT STATE SERVICE
22/tcp closed ssh
25/tcp closed smtp
80/tcp closed http
110/tcp closed pop3
123/tcp closed ntp
137/tcp closed netbios-ns
138/tcp closed netbios-dgm
139/tcp closed netbios-ssn
143/tcp closed imap
443/tcp closed https
445/tcp closed microsoft-ds
465/tcp closed smtps
995/tcp closed pop3s
5190/tcp closed aol
6969/tcp closed acmsoda
8007/tcp closed ajp12
8009/tcp closed ajp13
8021/tcp closed ftp-proxy
8080/tcp closed http-proxy
8081/tcp closed blackice-icecap
8082/tcp closed blackice-alerts
8443/tcp closed https-alt
8888/tcp closed sun-answerbook
8892/tcp closed seosload
9090/tcp closed zeus-admin
9100/tcp closed jetdirect
9111/tcp closed DragonIDSConsole
9152/tcp closed ms-sql2000
9535/tcp closed man
-----------------------------------------------------
I know, if the communication was started from the xda orbit, the samba ports dont have to be open, but if the firewall has a very restrictive setup, the commuication will not be start? Just an idea.
So my question: Is there a firewall in Windows Mobile 6? If yes, how can I configure it?
Kind regards,
hqqh
Any progresses here? Struggling with the same problem here.
Hi johnpatcher,
No, there is no progress on this topic at my side ((.
Do you have this connection problem when you try to connect to a share on a linux or a windows system?
Maybe there are differences in the implementation of the samba protocol between linux and windows.
Kind regards,
hqqh
I'm trying to connect to a samba (linux) share.
It doesnt work neither with "security = user" nor with "security = share". I just get a sound, but it doesn't connect. No entries in the server log files can be found .
Hi,
I setup a connection to a winXp computer where a folder was declared as shared folder and I was able to connect to it!!!
So what is the problem? Do I have the wrong settings of the samba-server?
The ip address of my XDA Orbit is added to the list of devices which have access to the share.
Has someone established a connection between a WM6 device and a linux system?
Kind regards,
hqqh
Hi
I have the same problem on my HTC touch cruise with WM6
Using TotalCommander LAN-plugin, I get connection to all the shared folders
in the LAN, but when I want to connect to a LAN-storage, located on a USB-server (running smb-protocol) I get the storages name, but no folders or files on it.
With my elder HP Ipaq 6910 running WM5 all works perfect.
I think there must be a setting (in WM6 or HTC) that prevents WM6 from connecting to a SMB-server?
Is there anybody who can connect with WM6 to a LAN-(smb)-storage?
Thanks
Stefan
I have the same issue. My ATT-Tilt-WM6 with HTC network plugin shows all available pcs, but will only connect to actual windows machines. I've got shared Linux samba drives, and shared ibook hosted samba drives, which show up in network plugin, but it can't connect to. All pcs/ibooks/linux boxes in network can connect to each other just fine. And my other phone, a sprint 6700 with WM5, shares the ibook and linux drives just fine, I'm only having the problem with WM6.
Network access to NAS using Lobster Tunes
If you just want access to audio files? I have managed to get access to my audio files on my NAS device (Synology DS107) using Lobster Tunes.
http://lobstertunes.com
The NAS device has a media server as well as being Upnp.
There *is* a fix for browsing Linux (samba)-based shares and it involves editing a line in smb.conf on the Linux server.
BUT
I found the fix in a very obscure forum on the Internet a long time ago AND I no longer have the link!! I did fix this problem on my old Linux server but it's not currently fired up so I will have to dig it out of storage and see what I did.
This is bugging me now as I need to 'fix' my new server!
Hi!
I was struggling this issue with Kaiser. And solution came with new ROM: http://forum.xda-developers.com/showthread.php?t=395555
Unfortunately, I can't figure out why and what is difference, but if I install any other ROM (e.g. Dutty's), I can't access samba shares. If I install the one above, I can access using TC, Resco, File Explorer and maybe others.
Hope this helps someone.
PS: I have Synology DS-207+ on the network.
OK. The correct answer is here:
Change HKLM\Comm\SecurityProviders\NTLM\LmCompatibilityLe vel to 1 from 3, not to 2 (ref: http://msdn.microsoft.com/en-us/library/aa922895.aspx and http://msdn.microsoft.com/en-us/library/aa925018.aspx) as "You can also set the LmCompatibilityLevelServer value to 2 or to 3. Both of these specify that the server will only use NTLM v2. Authentication will fail if the client is not capable of NTLM v2 protocol. For more information, see Authentication Services Registry Settings".
And check to make sure HKLM\Comm\Redir\SmbSignatureMode is set to 0 (not recommended 'cos it may cause problems with windows servers), 1 or 2, but not 3 (ref: http://msdn.microsoft.com/en-us/library/aa921092.aspx).
And you can try to set HKLM\Comm\Redir\AllowedAuthMethods to 3 to see if it makes any difference. To me, 2 works fine.
No need to modify samba configurations if you are running a recent version of samba (3.0.28 right now). Anyway, you can always try to add "use spnego = no" (maybe "client use spnego = no" or "spnego = no" as stated and/or quoted in other posts/web pages, I'm not sure of it.) to see if it makes any difference in your situation/samba version.
I do helpdesk support and I am on call frequently. We use PCanywhere to connect to our clients servers.
When I had WM5 I could just click modem link and choose activate, open PCanywhere, right click my remote & go to properties, select HTC USB modem.
PCanywhere would then use my phone as a USB modem and connect to the remote site. Now I am using Faria's 6.1 (which has the WM5 modem link & internet sharing) and I can not use my hermes as a modem no matter what I do.
All of the directions I have found are how to tether/internet via modem link. I want to use it as an external modem. Please Please help if you have been through anything like this.
oh yeah, FYI I am able to tether via internet sharing just not use the hermes as an external modem.
Hi,
are you looking for the Modem Link/Internet Sharing?
If yes, use the attached cab files.
wfg
starbase64
Thanks for the reply. I already have Modem link and internet sharing built into the faria clean 6.1 ROM. My issue is that it no longer works like it did in WM5.
I am trying to use my hermes as a modem for my laptop to connect to a remote modem via PCanywhere.
Maybe its the ROM! Did you try this with any other ROM's?
I have not tried it with another 6.1 rom but it worked with the factory wm5 rom. I love this ROM and I am trying to hold off on trying another one until Schapps comes out with his new one.
Oh well for now I am pulling a rube goldberg. I am tethering using internet sharing and then aventail vpn into my network, then vnc into a desktop here, then using PC anywhere to connect to my remote server.
How did you get pcanywhere to install on WM6.1? I have dcd's rom and pcanywhere v3.0 will not install, only v2.0 will.
Can you offer any help?
I gave up. I now just use Logmein and use my desktop to connect to the pcanywhere host.
Though the topic is almost two years old, it still serve my purpose today! Thanks a million for the cab files (HTC modem Link and internet sharing)
configuring both the laptop and the cellphone for the Internet connection, and finally, initializing the connection. Once you’ve completed steps 1 and 2, you’ll never have to do them again. The next time you want to access the Internet with your cellphone you simply “redial,” and you’re online. This particular setup is based on the HTC manufactured series of windows mobile devices. In my case I still use the now-ancient HTC Cingular 8125, however these steps work for the later models (and most Windows Mobile devices will also be similar).
Step 1: Getting Things Ready
The first thing that you need to do before you can establish a laptop/modem connection is to kill the current application that’s handling communications between your laptop and cellphone. In my case, I’m running ActiveSync, so I kill that process using the Task Manager.
laptop wireless internet access
For ActiveSync, you just find wcescomm.exe and kill the process. If you’re particular Windows Mobile device uses another application, you’ll need to find the process name and make sure that you kill it. Secondly, you’ll need to also shut down the communications software on your phone. In the case of ActiveSync, in Windows Mobile you go to Start -> Settings -> System -> Memory -> Running Programs, and then if ActiveSync is listed you’ll need to stop the process.
mobile internet
Once you’ve stopped the communications software on both the laptop and Windows Mobile phone, you’re ready to establish the connection between the laptop and phone as an Internet modem.
Step 2: Connecting The Cellphone As a Modem
The only real configuration required in Windows Mobile in order to set up your device as an Internet modem is to enable the “Modem Link.” The Modem Link configuration can be found by going to Start -> Programs.
mobile internet
Once you’re inside the Modem Link configuration, just change the Connection setting to USB. It’s likely that your other settings are already configured, however if they are not just make sure that the Access point name has the name of the connection you configured on your mobile device for Internet access. When everything looks good, click “Activate” at the bottom, and the “Status” at the top should change to “Active.”
mobile internet
If your device is already connected to your laptop, you’ll get the “Found New Hardware” wizard pop-up immediately. If you’re not yet plugged in, then now’s the time to do it.
wireless internet for laptop
Just make sure that you select to install from a specific location so that you’ll have the option to manually select your driver file. Click next.
wireless internet access
On the next screen, you’ll click the browse button and go to the folder where the driver file is located. In my particular case with the Cingular 8125, and for most HTC mobile devices, you’ll need the USBMDM.INF driver file as well as the HTC USB Modem Dialer application. Both are offered as a free download from xda-developers.com. Download the zip file and put them wherever you’ll remember. Then in the Windows Wizard screen above, browse to the directory where you extracted the INF file. If your Windows Mobile device is non-HTC, check with the manufacturer for a USB modem driver for your device.
laptop wireless internet connections
The Wizard will recognize the device. Depending on your particular device and the version of the driver, you may see the error message above. Just click “Continue Anyway.”
wireless internet connection
Finally, the driver’s installed and you’re ready to start using your new Mobile USB Modem anytime you want to, and anywhere you have a cellular signal!
Step 3: Initializing the Internet Connection
To establish your new mobile Internet connection using your laptop, run the executable that you downloaded from the link above. Regardless of your device or your cellular carrier, you’ll typically always need to enter a User Name and Password. You can access that information (if you don’t already know it from setting up Internet use on your mobile device) by contacting your cellular provider and asking for the User Name and Password to use with your Internet data plan.
wireless internet access
Enter those details into the USB modem dialer, and after a few moments it’ll inform you that you’re now connected. Yes, that means that at this moment, even while you’re sitting in the middle of the lake with a fishing pole in one hand, your laptop is now connected to the Internet via your cellphone signal. It may not be lightning fast – but when you’re desperate to submit your latest article (or check on your team’s latest game results), sometimes such a connection is all you need.
http://www.makeuseof.com/tag/how-to...ternet-access-through-your-cellphone-windows/
Modem Link: http://attachments.xda-developers.com/attachment.php?attachmentid=90454&d=1212623870
Usb Modem: http://forum.xda-developers.com/attachment.php?attachmentid=27020&d=1142937864
Internet sharing: http://attachments.xda-developers.com/attachment.php?attachmentid=90453&d=1212623870
Help, I did something wrong and I sort of cant use the phone anymore.
I installed a topbar. Unluckly I didn't read the info about it, and that it was made for Win 6.1.
I cannot access the menu, thus I cant uninstall the topbar or hard-reset my phone. There's a key combinatiou that's "Camera + Send + Power Button" that resets it. Problem resides there; My cellphone have a touch sensistive Send button, and this instruction is for a similar phone which possess a hard Send button. I can still, however, make calls and answer, send SMS's and read emails and activate bluetooth or wifi, but I can't start any app (I cant open the menu) or use the Mobile Device Center to do anything through USB (I've set it to connect directly as USB Mode and not to ask), I'll look for a Bluetooth dongle today to try to connect it through bluetooth.
I'm desperate. This phone is brand new but I already have made esthetical and hardware changes, so I've voided the warranty. Also that's a China phone, even though this particular model is able to update the ROM, I don't have the original ROM or knowledge to backup the actual one.
Any help is accepted. If there's any trick to go into "Add/Remove programs" without accessing the menus or to use some software hack to hard reset it thru Bluetooth or Wi-Fi, I'll be glad to know. If that's for any usage, I have Total Commander installed on this phone and I know how to edit the registry, but I can't start it.
Sorry for my bad english, I'm from Brazil
Thanks in advance and I'm really counting on you guys.
I'll be awaiting for an answer.
P.S.: I've been thinking - I don't know - about installing SPB Shell with some Auto Installer by the Mobile Device Center (over bluetooth) and let it start automatically, and by there, uninstall the culprit. Fiddling around, I've learnt how to trick the Mobile Device Center to make it install any CAB automatically, as if I've ran an auto-installer. My question is: would SPB Shell start automatically?
P.P.S.: Everything is working if I find another way to start it. Just the "start menu" died.
P.P.P.S.: No, I can't buy another phone. It's expensive here.
You can try MyMobiler, a PPC controller running on PC.
OR Try to remove it in Mobile Device Center if you can connect to it.
I don't have Mobile Device Center, using ActiveSync in win Xp but I believe you can remove on your Pc the partnership with your phone so next connection will start a new partnership where you can change the settings which prevent you from connecting Usb normally. Once you are connected, copy the file attached to your device, then take blackppc's advice, install MyMobiler http://forum.xda-developers.com/showthread.php?t=499344 and navigate to the file, execute and it will open settings where you'll find remove function.
I hope it helps
That's the problem, I can't connect it through USB to Mobile Device Center because I've set it to autostart as "pendrive" and not ask me about if I want it to start like this or in Mobile Device Center compatibility..
I'll buy a Bluetooth dongle in 5 minutes by now and I'll tell ya what happened
--
I.. er.. bought the dongle, but I cannot configure it. It cannot find any of my devices or enter the dongle's configuration area. It works well enough, though, on the store computer. I've tested thru 2 Windows 7 Computers and it gave me the same error.. gosh
As I said, I don't have Mobile Device Center but there must be a way to delete partnership with your device... Try this link http://technet.microsoft.com/en-us/library/cc722321(WS.10).aspx or google these keywords "delete partnership Mobile Device Center" and see how.
Alright, I've managed to get the bluetooth dongle working (a Bluetooth service was disabled). Now I need to connect the phone to the Mobile Device Center. Problem is that I had connected it to MDC, but I had hard-reseted then, and seems like MDC finds the phone as a "new device", thus cannot connect over bluetooth. Can I force it to connect or something? I'm thinking that may be my only shot.
P.S.: I can access a sort of device explorer (when I put the USB cable in and out, it pops up a message asking if I want to see the Memory Card images, and then it opens a image viewer. I can delete folders from there, if that's of any use)
tito12 said:
As I said, I don't have Mobile Device Center but there must be a way to delete partnership with your device... Try this link http://technet.microsoft.com/en-us/library/cc722321(WS.10).aspx
Click to expand...
Click to collapse
"On the mobile device:
If you have never attached your device to the computer using a USB cable, do so. After Windows Mobile Device Center starts, disconnect the device.
In ActiveSync, click or tap Menu, then click or tap Connect via Bluetooth."
I cant reach it
I've got an GREAT idea: I can, still, acess the image viewer. From there, I can copy and move folders around. So, all that I have to do is to create a folder in my memory card called "Start", with one shortcut inside, leading to the "Add/Remove programs" or "Hard Reset" program and copy it to the Windows folder. Then I restart the phone and it'll fire up the selected app. JOB DONE.
I only need to know the name of the app/parameters for Add/Remove programs or Hard Reset. Basing on what Windows is, it might be some "xxxx.cpl -command".
I leave this job for you guys, now I feel that I can still save my phone!!
I'll try link it to Total Commander first, before anything
P.S.: I've found the following string to invoke the "Add/Remove programs" for Windows Mobile 6.1
"#ctlpnl.exe cplmain.cpl,23?\Windows\shell.dll,13"
Would it work for windows 6.5?
P.P.S.: Meh, I cant create fake shortcuts that leads to nowhere on the local computer. How can I do it?
What a relief, God truly knows. My method worked. I can invoke anything from the phone using a shortcut. I've used the following line for the shortcut:
"33#ctlpnl.exe cplmain.cpl,10"
It invoked the "Add/Remove programs"
Thanks for the help, I really felt you guys tried to help me
I never seen a case like mine, but who knows.
Here's what I did:
- Connected the USB Cable into the phone, and it started as a pendrive
- Created a folder inside the phone called "Start"
- Created a folder called DCIM and added some images in there
- Created a .lnk file using XXMKLINK (which makes links from anything I type)
- Copied the .lnk file to the "Start" folder
- Unplugged the USB. At this moment, a popup appeared on the screen "Do you want to view the images?" Press yes.
*If the above method doesn't work, you can try going into a SMS message, then click for "Insert a Picture". The same browser will open
- Go to the root of the SD Card, or anywhere the "Start" folder you've created is
- Press and hold it, select Copy
- Click on the left side button and select "Device"
- Go to Windows folder. It takes a while to open
- Copy your "Start" folder inside. Press Yes on any prompt
- Restart the phone.
Voilá! The app will be run on the next startup
I really hope to help someone with this trick, who knows more than it helped me.
The topic can be closed at any time.
Great news