Related
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
which WM6 ROM are you using?
I had this problem with my Audi A4 car phone. The ROM versions using build Build 17745.0.2.3 were not good for that. Now, I'm using the Black Majik ROM and that works like a dream for the BT connections.
walshieau said:
which WM6 ROM are you using?
Click to expand...
Click to collapse
I have Cingular HTC 8525 [HERM100]
ROM Version: 3.30.2.1
ROM Date: 04/17/07
Radio version: 1.41.00.10
Protocol Version: 32.74.7020.18H
viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
Did you manage to solve this? Is so how?
Thanks
Msuk
i started having the same problems but i noticed it after i installed the voice command.. the rom that i use is the gm360 gold. the problem ive got was whenever i was in a phone call using my blutooth and i received a text message it would deactivate my headset. if ur having somewhat of the same problem try disabling ur voice command software...
Multiple AT&T/HTC WM6 ROMs?
My 8525 with the WM6 ROM can no longer route the audio to the BT headset (a Moto HS850 - but this is irrelevant, I suspect).
Basic BT headset usage was fine with WM5 (excepting the known issues with VoiceCommand).
I thought that perhaps the issue was related to the various little registry tweaks and sw patches. However, I had to do a reflash (for other reasons) and currently have just the default WM6, no registry tweaks, no BT sw patches, and MS VoiceCommand 1.6 installed (but set to NOT use the BT headset).
Pairing works fine. So does activation recognition (i.e. the little headset appears in the notification area when I open the boom on the headset and I can hear the background establishment of the BT channel). But audio (dialing tones and Connected call audio) do not reach the headset. The audio also doesn't go to the phone's speaker.
So, are the official ROM updates that repair this? Or, is the cost of going to WM6 the abandonment of BT headsets?
By the way, VoiceCommand 1.6 works fine--if I tell it to stay away from the BT headset.
Pays WM6 Roms
I had the same BT disconnecting problems with my original german Vodafone WM5 and also still have them with Pays WM6 ROMs (2.02 - 2.15) in my Audi A6 MMI.
With the original german HTC WM6 ROM BT worked very well.
Everything else on Pays ROMs is really great. He´s doing great jobs.
Any idea?
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
ai6908 said:
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
Click to expand...
Click to collapse
Come On, experts on the XDA portal, no solution?? noooo way!!??
My friend had the same issue with an tytn2 and last schap's rom in french language.
After an hard reset i get BT work fine with his OPEL.
But before i made lot of test desinstalling soft check registery key with no result. I still do know why BT was disconecting woth no reason.
Cheers.
Audi Bluetooth hands free
I had the same problems in wm6 with some roms.
I use the official HTC TyTn wm6 with excelents results, also Schaps 4.31 work very good (No disconection at all).
Now I am using Pay WWE 4.30 with many disconections.
BTW I have the audi TT bluetooth option.
On my 8525 Hermes I use the latest Pays Rom and it was disconnecting all the time (Parrot BT) - BUT then I decided to TURN OFF THE WAN and it improved greatly. Other thing I noticed is that the Hermes has to be in DIRECT LINE OF SITE of the BT device at all times or it is erratic.
BT
It seems there are differences in the WM6 versions. As said earlier in this thread for me original HTC and Schaps WM6 ROM versions are running without any BT disconnections.
Tried several WM6.1 versions now and every single one is working fine with my Audi MMI.
Similar problems handing BT control between applications
Hi all, I've been experiencing similar problems since changing ROMs. Originally with Schaps 3.60a I was able to make a call whilst listening to music all using my BT headphones. The Call would pause the music & resume afterward. It worked great! However since changing to Schaps 4.0, 4.2 & now CRC's PHKv12r9, I've never had the same. On a couple of rare occasions it has all worked fine but more often the bluetooth has to be turned off & back on again to reconnect. it seems to relate to what other programs are also running. I suspect there must be registry settings which control the bluetooth operational modes which are brought into play by the various programs running.
I recently installed the HTC WM6 ROM and was pleased with its speed etc. however the bluetoth has changed in some way and I was unable to use my Mototola handsfree car kit. I then tried the B&B 3.7 and had the same problem.
Is there a workaround i.e. have the wm6 rom with the old bluetooth ?
Thanks in advance for any help!
Some car-kits show as a headset, some as a hands free. The WM6 blutooth only seems to recognise Hands Free. My car kit does both, On Nokia it shows both, on WM6 only Hands Free.
Does anyone have a Headset Stack?
WM6 and car kit!
I have the same problem! If i activate the hansfree e deactivate it works! Is a motorola a like carkit! Can sameone help me? Tks
I have the cheapo aldi BT car cd radio. If I turn the radio on then the BT on my phone the radio mutes. But if I do it the other way round, ie BT on then turn radio on, it worls fine
hth
I recently upgraded to the KOzhura rom... it works great, but I'm having problems with bluetooth connectivity.
Prior to the upgrade, I had no problem connecting to my scoche bluetooth audio device (same as headphones, but with RCA outputs to tie to a radio). Now, I can't connect at all. I also cannot connect to my mogul ppc 6800 (altthough I never tried to do this prior to the rom upgrade). MY dell axim has no problems connecting to either.
Any ideas what the problem is?
Did I miss a patch or something?
i think there is a bug in that area, i use a bluetooth gps, and it drops out now and again, and it takes some time to come back online, in alright weather, so thats no it,
I reflashed it and it seems to be fine, or i will have to live with it untill HP releases the official version
I have a bluetrek S2 headset, Since I flashed my MDAC III to WM6(B&B) I'm having problems keeping the headset and my device paired. I flashed WM6.1(B&B5.0) to the device but the problem still exist. I can pair them to each oter, and everything works fine. When I turn of the headset( to recharge or to save battery) The connection is lost the next time I turn it back on, I do have to pair them again. First I tough it was my headsets problem, but then I tried to pair a BT GPS mouse, the same result. I have the same problem pairing this GPS with other devices(TyTN, iMate Jamin) running WM6. Does anyone know how to fix this bluetooth problem I'm having?
There might be a connection here (no pun intended). For quite sometime, I was using an old SE637 phone and had it working flawlessly with my Garmin c550 GPS.
During an hour and a half trip yesterday, the Garmin notified me 3 times that the bluetooth connection with the Tilt was lost (the SE profile had already been removed from the Garmin). I never saw this message before with the SE. FWIW, the 2 devices are no more than 2 or 3 feet apart at all times, and neither of them are physically touched during the trip. I'm concerned that this might be an HTC problem. Any thoughts?
smonte said:
I have a bluetrek S2 headset, Since I flashed my MDAC III to WM6(B&B) I'm having problems keeping the headset and my device paired. I flashed WM6.1(B&B5.0) to the device but the problem still exist. I can pair them to each oter, and everything works fine. When I turn of the headset( to recharge or to save battery) The connection is lost the next time I turn it back on, I do have to pair them again. First I tough it was my headsets problem, but then I tried to pair a BT GPS mouse, the same result. I have the same problem pairing this GPS with other devices(TyTN, iMate Jamin) running WM6. Does anyone know how to fix this bluetooth problem I'm having?
Click to expand...
Click to collapse
No one with an possible solution, or at least with the same problem??
Same problem here
I have just received a new HTC TyTN II on Orange that has the same problem. My old one (windows mobile 6.0) had no problem with my Motorola H12, but the new one (Windows Mobile 6.1) can't keep the pairing, and I have to turn Bluetooth on an off to get the connection. Always have to enter the passcode.
Version data is:
CE OS 5.2.19212 (Build 19212.1.0.3)
Processor: MSM7200-400MHz
ROM version 1.65.16.25
G 25.83.40.02H
D 3.28.00.00
Any help /advice much appreciated!
O.
Fixed itself...
This seems now to have fixed itself - I had to enter the password twice in a row for some reason and then it worked properly. So now all happy...
Windows Mobile 6.1 rocks...
Just wondering if you guys can help
My touch Pro 2
Vodafone UK
ROM - 1.14.161.6 (50207)
Radio - 3.44.25.27
Protocol - 61.25t.25.19U
links to the 2009 BMW 5 series iDrive and reads the phone book I can make calls fine but if I pick up an in coming call using the iDrive controller it makes the connection but there is no sound either way.
If I press the phone answer button on an incoming call then it works perfectly.
It does not do this all the time but its more like 90% can't hear and 10% works fine.
I contacted HTC who said that the phone matches the bluetooth profiles and it should be fine BMW have not got back to me yet (4 weeks so far)
this also happens to some one else I work with and his touch pro 2 on his 2005 BMW with the older iDrive and built in BMW Phoneprep.
another guy with an Audi has no issues at all. I also contacted Bury who make the Uni-System 8 car kits about when they were going to do a cradle for the TP2 and I was informed that they were not planning it at present, I asked why and they said "HTC's bluetooth was flakey"
I put the hard SPL on the phone and upped it to the latest HTC build
ROM - 1.19.707.2 (51489)
Radio - 3.44.25.27
Protocol - 61.25t.25.19U
but have put it back to the Warranty status as it did not make any difference
Any help appreciated
I know Parrto is a different BT HFBTP but I had all kinds of flakey problems until I updated to the latest Radio in the TP2 and upgraded to the latest firmware for the Parrot CK3100 Car Unit.
Try an update to your iDrive system.
More car kit problems
I'm really disappointed by the bluetooth in the TP2. Having just upgraded from a Snap which worked perfectly with all my attachments, the TP2 is a disaster with the car kit in my (new) Volvo. (A bit like the BMW story at the head of the thread.) Won't connect to my TomTom sat nav. Almost works with my Parrot (upgraded as recommended above). Not what you expect from a 'top of the range' piece of kit from htc. I hope there will be a patch for the BT stack. In the meantime I have to revert to my Snap for car journeys. Bizarre.
This happened to me:
If I don´t set up a data connection to my carrier, the link to my bluetooth car kit works perfectly, meaning that I can answer calls and hang up using the button on the steering wheel.
Once I set up a data connection, I can only answer and hangup using the buttons on the telephone. In any case I can listen and talk using the car kit.
TP2
The same issue here. My TP2 won't connect properly to my Volvo V70 2009 BT Car kit. It is connecting and synchronizing but then it won't make call's. (sometimes it suddenly does work). My phone is getting really slow. And somethine the connection fall's away during a conversation. Even when i shut down all data connections on my phone it behaves as mentioned here above. HTC and Volvo just point at each other and a solution seems far away. Yes. I did the firmware upgrades on both sides. At this time i would not recommend the HTC TP2 as a business phone. My collegues have similar issues with other car brands.
Volvo V70 2009 - Firmware November 2009
HTC Touch pro 2 - WM 6.5 UK (and a dutch vodafone office account)
Anyone with a solution? Suggestions? thnx.
My TP2 (unbranded) was working fine until I updated it to WM6.5 (an official release). Now, there are no issues when it gets paired with my son's Mitsubishi Lancer but it refuses to work correctly with my Audi A4. It picks a call but stays silent until charger is connected. Disconnecting of charger "fixes" the situation so I start hearing a call.
Bluetooth wasn't working for me either. Pairing went fine, answering worked, but no sound at all... I followed instructions on this page: http://www.everythingwm.com/forum/moto-q-9c/q9c-and-infiniti-g35x-bluetooth-problem-16833-4.html and now everything works as expected. I'm driving a Renault Espace with a built-in stereo/gps/carkit.
i bought a car kit MP3 player for my car. I paired it with my TP2 and enabled the "BT Audio" and "BT Handsfree". Outgoing calls work fine with no problems at all. But during incoming calls there is a problem. If the incoming call is from someone saved in my contacts, the BT carkit does not ring. If its from an unknown number (not saved in my contacts), it works perfectly. I tried all the tweaks and hacks in this forum but nothing worked. Anymore ideas.