I recently upgraded to the KOzhura rom... it works great, but I'm having problems with bluetooth connectivity.
Prior to the upgrade, I had no problem connecting to my scoche bluetooth audio device (same as headphones, but with RCA outputs to tie to a radio). Now, I can't connect at all. I also cannot connect to my mogul ppc 6800 (altthough I never tried to do this prior to the rom upgrade). MY dell axim has no problems connecting to either.
Any ideas what the problem is?
Did I miss a patch or something?
i think there is a bug in that area, i use a bluetooth gps, and it drops out now and again, and it takes some time to come back online, in alright weather, so thats no it,
I reflashed it and it seems to be fine, or i will have to live with it untill HP releases the official version
Related
I have a BlueAngel / SX66 on Cingular. I have been through every ROM upgrade you can imagine, all with the hopes that SOME DAY the bluetooth will work properly. More specifically, I have a stick BMW and it's impossible for me to talk on this thing and drive at the same time, not to mention really unsafe, but I absolutely need to talk in the car because I'm on the move a lot. There is a bluetooth headset interface in the car that I know is pretty damn good because it works so beautifully with Motorola devices (specifically the somewhat ancient V600 I have). My SX66 can barely get through 3 seconds of being connected to it before it just goes haywire and drops the connection, locks up my stereo, etc. It's a disaster. So every time a new ROM comes out I sit for hours upgrading just hoping that maybe this time it will work. I've tried a Motorola HS810, HS850, a Logitech Mobile Freedom, a Jabra BT800, and an Ericsson HBH600. Not one of them can consistently hold a connection without it dropping here and there and me having to go to the Bluetooth manager and "reconnect". These are all reputable headsets that work flawlessly with other devices.
Conclusion: The MS bluetooth stack is pathetic.
Problem: I want my SX66 to work with JUST ONE bluetooth device flawlessly. It doesn't need to be the car necessarily, but that would be really sweet if it did. I have recently upgraded to WM5 in another feeble attempt, but alas WM5 doesn't appear to be compatible with GoodLink, the messaging sync software that I'm tied to that makes me use this god awful device (I won't use a Treo because the Palm UI is garbage and it has its own host of problems I've seen). I'm going to have to downgrade back to 1.40 to get GoodLink to work again because its pretty vital to me.
Question: Does anyone know how to get Bluetooth to work consistently with any headset, paired with an SX66? I seriously have sank like $400 just in headsets trying to get this piece of crap to work. If there are any stack upgrades, firmware flashes, etc. WHATEVER I'm willing to try anything. This is the only Windows based device available on the market that is compatible with GoodLink and has a qwerty keyboard that's easy to use.
FYI, the BA uses the Broadcom/Widcomm BT stack, unless you've upgraded it to WM5.
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
which WM6 ROM are you using?
I had this problem with my Audi A4 car phone. The ROM versions using build Build 17745.0.2.3 were not good for that. Now, I'm using the Black Majik ROM and that works like a dream for the BT connections.
walshieau said:
which WM6 ROM are you using?
Click to expand...
Click to collapse
I have Cingular HTC 8525 [HERM100]
ROM Version: 3.30.2.1
ROM Date: 04/17/07
Radio version: 1.41.00.10
Protocol Version: 32.74.7020.18H
viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
Did you manage to solve this? Is so how?
Thanks
Msuk
i started having the same problems but i noticed it after i installed the voice command.. the rom that i use is the gm360 gold. the problem ive got was whenever i was in a phone call using my blutooth and i received a text message it would deactivate my headset. if ur having somewhat of the same problem try disabling ur voice command software...
Multiple AT&T/HTC WM6 ROMs?
My 8525 with the WM6 ROM can no longer route the audio to the BT headset (a Moto HS850 - but this is irrelevant, I suspect).
Basic BT headset usage was fine with WM5 (excepting the known issues with VoiceCommand).
I thought that perhaps the issue was related to the various little registry tweaks and sw patches. However, I had to do a reflash (for other reasons) and currently have just the default WM6, no registry tweaks, no BT sw patches, and MS VoiceCommand 1.6 installed (but set to NOT use the BT headset).
Pairing works fine. So does activation recognition (i.e. the little headset appears in the notification area when I open the boom on the headset and I can hear the background establishment of the BT channel). But audio (dialing tones and Connected call audio) do not reach the headset. The audio also doesn't go to the phone's speaker.
So, are the official ROM updates that repair this? Or, is the cost of going to WM6 the abandonment of BT headsets?
By the way, VoiceCommand 1.6 works fine--if I tell it to stay away from the BT headset.
Pays WM6 Roms
I had the same BT disconnecting problems with my original german Vodafone WM5 and also still have them with Pays WM6 ROMs (2.02 - 2.15) in my Audi A6 MMI.
With the original german HTC WM6 ROM BT worked very well.
Everything else on Pays ROMs is really great. He´s doing great jobs.
Any idea?
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
ai6908 said:
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
Click to expand...
Click to collapse
Come On, experts on the XDA portal, no solution?? noooo way!!??
My friend had the same issue with an tytn2 and last schap's rom in french language.
After an hard reset i get BT work fine with his OPEL.
But before i made lot of test desinstalling soft check registery key with no result. I still do know why BT was disconecting woth no reason.
Cheers.
Audi Bluetooth hands free
I had the same problems in wm6 with some roms.
I use the official HTC TyTn wm6 with excelents results, also Schaps 4.31 work very good (No disconection at all).
Now I am using Pay WWE 4.30 with many disconections.
BTW I have the audi TT bluetooth option.
On my 8525 Hermes I use the latest Pays Rom and it was disconnecting all the time (Parrot BT) - BUT then I decided to TURN OFF THE WAN and it improved greatly. Other thing I noticed is that the Hermes has to be in DIRECT LINE OF SITE of the BT device at all times or it is erratic.
BT
It seems there are differences in the WM6 versions. As said earlier in this thread for me original HTC and Schaps WM6 ROM versions are running without any BT disconnections.
Tried several WM6.1 versions now and every single one is working fine with my Audi MMI.
Similar problems handing BT control between applications
Hi all, I've been experiencing similar problems since changing ROMs. Originally with Schaps 3.60a I was able to make a call whilst listening to music all using my BT headphones. The Call would pause the music & resume afterward. It worked great! However since changing to Schaps 4.0, 4.2 & now CRC's PHKv12r9, I've never had the same. On a couple of rare occasions it has all worked fine but more often the bluetooth has to be turned off & back on again to reconnect. it seems to relate to what other programs are also running. I suspect there must be registry settings which control the bluetooth operational modes which are brought into play by the various programs running.
Hi all, First of all I'd like to say this is the most informative forum I have been involved with . Up till now I haven't needed to post any questions.
Now....
I have an i-mate Jasjam herm200 (purchaced from Telstra). Until recently I was running WM5 which it was shipped with. Apart from the slow speed of the PPC (due in part to the Telstra Bloatware) it ran fine.
Since then I have tried many cooked ROMS inc. all Jasjamming's WM black editions, Most of Schaps WM6 and a few others, and I'm having problems with connecting my HS850 headset & my Altina GBT709 GPS receiver.
The Headset,
After pairing the headset I found that when making or receiving a call the person on the other end can only hear me for a few seconds but I don't hear anything, then when the headset Icon appears on the screen the call remains active but I can't hear the other person & they can't hear me.
I reflashed the Telstra Jasjam shipped WM5 rom: 1.31.305.2_106_6275_1.38.30.10_108_ship and the headset stilled didn't work , reflashed it with the same rom again (various WM6 roms in between) and it will work fine.
Can someone tell me if the problem is with the HS850 or the WM6 upgrade?
The GPS,
Since I have started flashing different roms I have never been able to connect the Altina 709 to TomTom Navigator 6, even when reflashed with the shipped rom. I cannot figure out if the problem is with the Bluetoth or a configuration issue with my PPC.
I can live without the GPS as I have a stand alone TT GO 500, but not being able to connect the bluetooth headset properly is driving me NUTS!!!
Please Please Please can someone help me figure this out.
Squirt
Any ideas people?
Don't know if this helps,but I found the Telstra customisations that you can install give me grief with my parrot car bluetooth system - they mess with the bluetooth stack in some way. I found the Telstra WM5 rom didn't play nicely either, which was my main incentive to upgrade to WM6. Are you using a clean install of the WM6 roms without tacking any of the telstra stuff on top?
I eventually found a .cab with just the proxy manager which is all I needed, and schap's roms work nicely for me regarding bluetooth, so I'm a bit wary of fiddling with it now.... I know the black series (and a few others that must have used the same build) had bluetooth issues for me.
Thanks for your reply, I'm currently running Black 3.0.1 which has been the closest I've got to getting the BT H/Free working.
With 3.0.1 I can hear the person on the other end through the phone speaker not the BT, BUT, They can hear me through the BT headset........strange.
I'm just waiting to catch up with a bloke from work with a different brand BT Headset to see if it makes a difference.
I have a bluetrek S2 headset, Since I flashed my MDAC III to WM6(B&B) I'm having problems keeping the headset and my device paired. I flashed WM6.1(B&B5.0) to the device but the problem still exist. I can pair them to each oter, and everything works fine. When I turn of the headset( to recharge or to save battery) The connection is lost the next time I turn it back on, I do have to pair them again. First I tough it was my headsets problem, but then I tried to pair a BT GPS mouse, the same result. I have the same problem pairing this GPS with other devices(TyTN, iMate Jamin) running WM6. Does anyone know how to fix this bluetooth problem I'm having?
There might be a connection here (no pun intended). For quite sometime, I was using an old SE637 phone and had it working flawlessly with my Garmin c550 GPS.
During an hour and a half trip yesterday, the Garmin notified me 3 times that the bluetooth connection with the Tilt was lost (the SE profile had already been removed from the Garmin). I never saw this message before with the SE. FWIW, the 2 devices are no more than 2 or 3 feet apart at all times, and neither of them are physically touched during the trip. I'm concerned that this might be an HTC problem. Any thoughts?
smonte said:
I have a bluetrek S2 headset, Since I flashed my MDAC III to WM6(B&B) I'm having problems keeping the headset and my device paired. I flashed WM6.1(B&B5.0) to the device but the problem still exist. I can pair them to each oter, and everything works fine. When I turn of the headset( to recharge or to save battery) The connection is lost the next time I turn it back on, I do have to pair them again. First I tough it was my headsets problem, but then I tried to pair a BT GPS mouse, the same result. I have the same problem pairing this GPS with other devices(TyTN, iMate Jamin) running WM6. Does anyone know how to fix this bluetooth problem I'm having?
Click to expand...
Click to collapse
No one with an possible solution, or at least with the same problem??
Same problem here
I have just received a new HTC TyTN II on Orange that has the same problem. My old one (windows mobile 6.0) had no problem with my Motorola H12, but the new one (Windows Mobile 6.1) can't keep the pairing, and I have to turn Bluetooth on an off to get the connection. Always have to enter the passcode.
Version data is:
CE OS 5.2.19212 (Build 19212.1.0.3)
Processor: MSM7200-400MHz
ROM version 1.65.16.25
G 25.83.40.02H
D 3.28.00.00
Any help /advice much appreciated!
O.
Fixed itself...
This seems now to have fixed itself - I had to enter the password twice in a row for some reason and then it worked properly. So now all happy...
Windows Mobile 6.1 rocks...
Hi,
I upgraded my ROM from WM6 to WM6.1 (Kavana's ROM) a couple of days ago, but my Route 66 N7 software can't work with my Adapt AD-300 GPS receiver anymore.
It's quite weird: my phone finds the receiver, I can add it as device and the connection looks OK. Only Route 66 keeps complaining it can't find a receiver. There is no GPS signal on the receiver, but before the upgrade the software could see the receiver with just a good BT signal. Now: nothing.
I have tried everything: serial connection yes/no, secure connection yes/no, COM6/COM7, enable incoming beams/BT to my phone. Nothing helps.
Anyone know about issues between Bluetooth devices, maybe Adapt specifically, and WM 6.1?
Otherwise, is there any software with which I can check the BT connection on my phone itself?
Only thing I haven't tried yet is factory reset the GPS receiver itself (I removed the battery for a couple of minutes, but don't know if this is sufficient).
Bah, I like 6.1 too much to revert to 6.0
-mod-: oh right, my phone is an S620.