As many posts already speak about that. Here are the .cab that work (P3300, ARTEMIS, with WM6)
MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)
DONT NEED TO FORMAT IF YOUR CARD IS ALREADY FORMATED WITH THIS FILE FORMAT.
You can then use any fat32 card you want after SDHC upgrade.
WM5torage 1.78b is working fine but slow for me after SDHC upgrade. Tell us if it run for you too.
Artemis running WM5 could be flashed too, with Certification .cab (.xml inside). I will post a link as soon as possible.
ANSWER!! Yes WM5torage is very slow, as it is not working as usual. Don't know if the creator of this program gonna upgrade it for SDHC use. This software is not so important for the use of your SDHC Card, that was just to say that it could work (very slow) with new SDHC drivers.
[WARNING] There was some problems after this install. Tell me if you got problems using this .cab --> SDHC_Artemis_back2original.cab are the original OMAP850.dll, SDBus.dll, SDMemory.dll for Artemis, so you can load it at any time to go back to your original settings without SDHC support.
[WARNING] there is a problem if you plan to flash with SDHC card inserted on your device. With USB wire too. Remove your SDHC card before flashing or hard resetting your device.
I m the first one to get it.
I've got it
Thanks
Now waiting for the 6Gb
SdHc
gguyaz said:
As many posts already speak about that. Here are the .cab that work (P3300, ARTEMIS, with WM6)
MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)
You can then use both of them after SDHC upgrade.
WM5torage 1.78b is working fine for me after SDHC upgrade. Tell us if it run for you too.
Click to expand...
Click to collapse
Hi,
anything for WM5?
thanks
Someone has tested? Please make a comment
quelqu'un l'a testé? merci de nous faire un commentaire
6 Gb Sandisk Micro Sdhc, Htc P3300, Original Wm6
IT WORKS!!!!!!!!!!!!!!!!
Just bought the phone upgraded the ROM with original HTC WM6 ROM. Used the file as above. Pluged in my Micro SD and it works!!!!!!!
I had phoned HTC support for help as I bough the 6GB SDHC card when i bought the phone but couldnt get it to work, but was then told it doesnt support SDHC!
BUT IT DOES NOW!!!!
finally 4GB working on my P3300 WM6 (original HTC rom)
hoooooowever, the transfer through wm5torage is veeeeeeeeeeeeeeery slow!
sais 2h. for 1GB thats way off normal. wasn't that slow with my 2GB card (didn't try the 2GB card with new driver tho)
anyways, when i got everything on my new 4GB card, i am gonna do some benchmarks, try the card from the phone itself... and if it's just the USB transfer that is hella slow... i can take that.
btw, when i saw wm5torage 178beta so slow i tried 175. it works, but same slow speed
Thats a slow speed indeed. I have been copying files to fill my 6gb card since 6.45 just after my last post above. Its is now 7.40 and i have copied 1.7 GB.
Thats 1.7 gb an hour. Not a fantastic speed.
Im connected to a USB 2.0 port on my PC using Active Sync 4.5, connected directly to my P3300 (no cradle).
I didnt run all the files above though. All i ran was the first file SDHC_Artemic.cab
I didnt run the WM5torage file. Should i have?
Regardless it is working fine so far with out.
rpb said:
I didnt run the WM5torage file. Should i have?
Click to expand...
Click to collapse
if you're used to transfer via active sync, you're perfectly fine.
wm5torage is just a program to convert your phone+sd card into some sort of "usb memory stick" so you can access your phones sd card on every computer without drivers.
merci bq
gguyaz
merci encore pour ce cab... ca reglera l'un des plus gros soucis de l'artemis
gguyaz said:
As many posts already speak about that. Here are the .cab that work (P3300, ARTEMIS, with WM6)
MOST IMPORTANT is to format your actual SD card and future SDHC card with fat32 ! (backup data before)
You can then use both of them after SDHC upgrade.
WM5torage 1.78b is working fine for me after SDHC upgrade. Tell us if it run for you too.
Click to expand...
Click to collapse
This great thanks for the file.
One question - If my current SD card is already fat32 do I need to reformat it and then install the patch or can I just install the patch and upgrade the SD card to an SDHC card later?
Thanks
Rich
First cab?
I can't download the first can file?
I get redirected to the login screen.
But i'm already login
ok, USB transfer was slow, but worked. gonna see next days how syncing goes.
so, this worked great... except on my p3300 the GPS stopped working. u think there is something in this cab patch that could have affected that somehow?
lepsyfou said:
Someone has tested? Please make a comment
quelqu'un l'a testé? merci de nous faire un commentaire
Click to expand...
Click to collapse
It works!
Test passed.
http://bbs.pdafans.com/viewthread.php?tid=460614&extra=page=1&filter=type&typeid=176&page=1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First of all, Hi. I am new to this fourm and found it very helpful. Anyway, I can confirm that this works for my "O2 XDA Orbit" with 6GB card (FAT32 formatting), it has windows mobile 6 and the ROM version is "3.4.206.2 WWE". I have checked my GPS and Wireless adapter, they both seem to be working fine aswell.
Just to mention the WM5Storage, even before the patch, it was very slow for moving information in and out of the PDA. So I think that it needs an update for WM6 although I haven't yet tried the version that is attached in the very first post becuase alot of people are complaining about it so I didn't even bother, I just used the card reader that came with my card.
Thanks gguyaz for your excellent work.
My Window mobile 6 is official one from o2 itself. Hope it helps
Any news of a cab for WM5?
Cheers,
mugglesquop said:
Any news of a cab for WM5?
Cheers,
Click to expand...
Click to collapse
Hi! did you run a PDA with WM5?
If yes, could you tell us if there are OMAP850_SDHC.dll, sdbus.dll and sdmemory.dll on your \windows directory.
mugglesquop said:
Any news of a cab for WM5?
Cheers,
Click to expand...
Click to collapse
Hi, why don't you install the official WM6 provided by your PDA supplier (It's free).
Regards
kamal_chauhan said:
Hi, why don't you install the official WM6 provided by your PDA supplier (It's free).
Regards
Click to expand...
Click to collapse
1. If you look at my sinature, u'll see i'm with T-Mobile, they suck so much that they didnt release a upgrade for the MDACIII
2. i cant connect my MDA to a PC caus i blew up the USB board (computer doesnt see it when you plug it in)
finally, gguyaz, yes i have all of those files.
gguyaz said:
Hi! did you run a PDA with WM5?
If yes, could you tell us if there are OMAP850_SDHC.dll, sdbus.dll and sdmemory.dll on your \windows directory.
Click to expand...
Click to collapse
I have the HTC P3300 w/ WM5.
I just checked and only seen OMAP850_SDHC.dll.
Related
At Lumpistefan's ROMkitchen (http://www.romkitchrn.de) you can get a lot of things. Do you miss something?
I do:
- Alexander Zavorine's NoteM (http://zavorine.net) - freeware mp3 voice recorder
- SPB FreeCell - games
- Fann Software Converter (http://www.fannsoftware.com)
- WisBar or same
- Yishin SoundToday
- Remover
- CHM reader
- XacRett
The last 4 are very small progs and do not take up much space, but installing them every time I do a HardReset... :evil:
Something I've forgotten?
I think he should also offer coffee and donuts.
cruisin-thru said:
I think he should also offer coffee and donuts.
Click to expand...
Click to collapse
yeah ... and he should pay you $10 for each time you use his kitchen
WM 2003 Turning On/Off Automatically
I would love to see a startup app that stops the WM2003 from automatically turning the XDA to ON when it is going in and out of coverage areas. That is the primary reason why I haven't permanently switched to WM2003 from SER 1.2
Does anyone know of a solution to work around this wonderful feature? :twisted: :?:
Ok my friends.
For all of you for free.......
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
And you can also get some bucks of me.....
But stop. Just have to take a lok at my traffic.
Since opening the Kitchen i´ve got about 45 GB Transfervolumina for the Kitchen. That are nearly 3000 ROMs and that would be 30.000 Dollars. I don´t have so much money in the moment... Sorry
:shock:
Now to something completly diffrent.
- Alexander Zavorine's NoteM (http://zavorine.net) - freeware mp3 voice recorder
- SPB FreeCell - games
- Fann Software Converter (http://www.fannsoftware.com)
- WisBar or same
- Yishin SoundToday
- Remover
- CHM reader
- XacRett
Click to expand...
Click to collapse
If i get the snapshot files it will be much faster and easier for me to get it included in the kitchen...
Regards
Stefan
Here you go! One is 2 minutes after HardReset and the 2nd - after all the installation ( possibly not all settings :?: )
Hi generous Stephi ...
Thx for the bucks ... but my bank didn't accept "cooked" money
I cooked 4.01.16 with MMS Composer ... it gives error msg "some components are missing ...". I found it's the MIDI56.sa and Camera.sa cab files ... no big deal, I installed them and every things works like charm .... thx again
I thought of sending you the snap file of IA Caller ID s/w, but aparently I found it dosn't give you the pic of the caller everytime ... I 'm not sure it's my ROM or it works only for XDA II
Biso007 said:
Hi generous Stephi ...
Thx for the bucks ... but my bank didn't accept "cooked" money
I cooked 4.01.16 with MMS Composer ... it gives error msg "some components are missing ...". I found it's the MIDI56.sa and Camera.sa cab files ... no big deal, I installed them and every things works like charm .... thx again
I thought of sending you the snap file of IA Caller ID s/w, but aparently I found it dosn't give you the pic of the caller everytime ... I 'm not sure it's my ROM or it works only for XDA II
Click to expand...
Click to collapse
Biso I have the same ROM 4.01.16 with MMS Composer. Even the IA Caller ID installed it's working fine and it's showing the caller pic every time..
2 Stefan:
Thanx a lot for the new equipment! I just have problems cooking 4.01.16 ROM -
unrecognised line:
CAL_MACHINE\SOFTWARE\Microsoft\Shell\Extensions\EventSounds\3gp]
Error creating fdf file
What's that?!
And what is not included in 4.01.19 GER? It gives 800kb more!
2. Does it support English or it has to be installed additionally?
3. What is the main difference comparing to 4.00.33?
bob190cm said:
2 Stefan:
Thanx a lot for the new equipment! I just have problems cooking 4.01.16 ROM -
unrecognised line:
CAL_MACHINE\SOFTWARE\Microsoft\Shell\Extensions\EventSounds\3gp]
Error creating fdf file
What's that?!
Click to expand...
Click to collapse
Sorry. Was my fault....
Should be fixed now....
HTH
Stefan
bob190cm said:
And what is not included in 4.01.19 GER? It gives 800kb more!
2. Does it support English or it has to be installed additionally?
3. What is the main difference comparing to 4.00.33?
Click to expand...
Click to collapse
4.01.19 do not includ PDF Viewer and Presentation viewer.....
German ROMS do only support German. It's not possible to chnage the language or install a "patch" to do so....
4.00.33 was an prereöease. many files differ some other are changed by layout... (exe are now dll)
Stefan
i would be gratefull if Stefan adds description of the ROM downloaded like yorch, in other words for the 3rd time i fall into that t-mobile crap where once i download this rom i can't change it the SW way i have to do the SD way which never worked with me in 3 differant mobiles ?!?!?!?!?!? which might mean that my MMC 256 card might be differant the SD 256 or something like that, anyways if you specify that this rom version is OK & this version will not allow further SW upgrade that would be nice
Rabia said:
i would be gratefull if Stefan adds description of the ROM downloaded like yorch, in other words for the 3rd time i fall into that t-mobile crap where once i download this rom i can't change it the SW way i have to do the SD way which never worked with me in 3 differant mobiles ?!?!?!?!?!? which might mean that my MMC 256 card might be differant the SD 256 or something like that, anyways if you specify that this rom version is OK & this version will not allow further SW upgrade that would be nice
Click to expand...
Click to collapse
What are you meaning with "description of the ROM" Since Yorchs kitchen is down, i'm also not able to take a look at his kitchen....
So give me some hints, or some texts you want to have added....
Stefan
LumpiStefan said:
What are you meaning with "description of the ROM" Since Yorchs kitchen is down, i'm also not able to take a look at his kitchen....
So give me some hints, or some texts you want to have added....
Stefan
Click to expand...
Click to collapse
i meant you know that T-mobile roms once installed in your xda I will never be able to change this rom any more through the software upgrade, you will have to use the SD card method, their are other roms that you can upgrade & downgrade freely from without any problems so put a note say beside the 4,16 & 4,05 rom that once you upgrade to this rom you'll not be able to change the rom unless using the SD card way,
I'm Cooking now a Rom 4.01.16 with the new Poly's ringtone integration Thanks to Stefan for the hard effort and the hard work otherwise we’re at the STONE AGE :lol: and I can't deny The developers they are the masters.
Stefan, he's right about the ROM descriptions most ppl doesn't know about the ROM differences otherwise they install it.
i should call him super stefan since already the change is made, god this man is prompt 8) 8)
Rabia said:
i should call him super stefan since already the change is made, god this man is prompt 8) 8)
Click to expand...
Click to collapse
We should offer him a beer Cheers Mate.
So, what happens if I try to upgrade with the .exe file to 4.01.16 k? (I have 4.00.11 k)
it should say, errorgetconnectiontype then a message that says check the USB connection or with the kitchen roms the windows will simply dispapear
Specially thanks to freepk, -QwertY- and my testers: Udaw and CatMan
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM:
1.Fixed boot after some Soft Resets
2.Fixed Wi-Fi
3.Fixed Bluetooth
4.Compression LZX->XPR
5.Deleted Speed Dial
6.Deleted Image Maker
7.Deleted Image Wizard
8.Deleted Voice Commander (because in 19209th build we have commander by microsoft)
9.Deleted frames
10.Deleted melodies
11.Deleted SMS Sender (use standard)
And other changes, which was in 3rd release
enjoy
eten m600+ wm6.1kE R4 STABLE SECOND (41.7 Mb)
Download link
friends
it was updated to 6.1
kozhura said:
it was updated to 6.1
Click to expand...
Click to collapse
Welcome back, Master. We felt a bit lonely lately. I personaly still use the hx4700, but I got also a iPAQ 614c which works as good as your WM6 rel4.
Maybe I get a V900 later, before the Olympics....
Anyway, keep up the good work
Cheers,
Dirk
Cool, never imagine M600+ could get WM6.1. Do you think it will work for M600 (not +) too?
super.
It is a excited news for M600+ users
I use ActiveSync to update the WM6.1 ROM. It is work!!! Thank you very much.
but something wrong with my m600+(HONG KONG edition).
1.lock installation screen for the first time(the progress bar run all the time). i use pen to reboot my m600+. and then work well.
2.miss welcomecenter.exe & calculator.exe
other was work well!!!
I use ActiveSync to update the WM6.1 ROM. It is work!!! Thank you very much.
but something wrong with my m600+(HONG KONG edition).
1.lock installation screen for the first time(the progress bar run all the time). i use pen to reboot my m600+. and then work well.
2.miss welcomecenter.exe & calculator.exe
other was work well!!!
Thank you very much
Ciao!
but how to install this rom with activesync on my eten m600+? is a .bin file and not an .exe...thanks
how to run this file...????
jackleung said:
Cool, never imagine M600+ could get WM6.1. Do you think it will work for M600 (not +) too?
Click to expand...
Click to collapse
yes i would also like to know this, please
with sd card (put the bin file in sd card) then enter boot loader by pressing
power + reset then relase the power and continue pressing the reset for 5 sec
Will this ROM work on the HX4700? Thanks
Help, please! The WM6.1 ROM is using russian keyboard. How can i turn it to english?
kozhura:
I can't connect GPRS! Pls help!! Thanks!!
[/IMG]
About Wm 6.1 m600+ rom
Dear kozhura,
Really very great congragulations for your hard and promising work about the ETEN M600 and + roms.I have tried your rom wm 6.1 pro for M600+ just few days ago, and while eten company have forgotten us (eten m600+ users), you have come and saved us a prayer.I want to thank you sincerely.
Here are some little notes I would like to request support if you dont mind ;
1) After installing the WM 6.1 R2 rom from SDCard, in the first boot, the system hangs while installing the programs from extrom I suppose (I have read some post in Russian forums but frankly I could not understand anything from them, google and other translators suck while translating into English).My question is do I have to do something to stop installing extrom software or do I have to just soft reboot?
2) My other question is, after I installed the R2 rom from SDCard, there appears garbage characters in the boot Screen of my M600+, it is not a big problem but I think it is realated with the SDCard flash process.Can you advise anything about this?
3) There is also another guy called Santaclaus in Russian forums, I am sure you have heard of him, he also released a rom but wm 6.0 (yours is wm 6.1).In what ways is your rom different from this rom?
I pre-thank you for your replies my friends.keep up the good work.
faimond said:
I use ActiveSync to update the WM6.1 ROM. It is work!!! Thank you very much.
but something wrong with my m600+(HONG KONG edition).
1.lock installation screen for the first time(the progress bar run all the time). i use pen to reboot my m600+. and then work well.
2.miss welcomecenter.exe & calculator.exe
other was work well!!!
Click to expand...
Click to collapse
thank you kozhura
the same problem exist my pda. where to downloads this 3 installation?
Kozhura,
Great works.
I still use Hx4700,but glad to see you here.
vivi
Some little problem!
Hello,Kozhura:
I'm from china.Thank you for your hard work ! I download and flash the wm6.1 rom for m600plus last night,it work! 32M ram left when I boot the system.But I also find some problem :
1. GPRS can't use.
2. SDHC can't be read. When I want to install other SDHC driver ,for exampe : sdhc driver for X500 ,sdhc driver from 777 ,sdhc driver from xda developers ,it says install unsuccess .Only the sdhc driver from eten official can install success,but still can't work.
3. Wifi seems not stable. It worked when I just flash the rom ,it's last night . But at this morning ,after 10 hours ,when I want to open wifi ,it can't!
I reset system ,drop battery , all this methods can't work. I can only reset the system to default settings , and then the wifi work. I have installed Monster Chinese and ran spb backup to restore my backup of my pim and documents on the PPC.
Hope you Improvement for the rom!
1. GPRS doesn't work,even used the connection wizard
2. WIFI not stable, falied to connect the wifi in wireless manager. but after that, can use wifi in connection setting to connect wifi.
but anyway, thank you very much.
(English not good)
[WWE][RUS][WM6.1][Build 21056]AndreW82 ROM[Lite][ExtraClean][version 1.4]
List of changes:
- ActiveSync via BlueTooth bug fixed
- Bluetooth dial-up modem was added in the modem list in "Add a new modem connection" under "Connection" tab
- Official keyboard resources were included (now Opal Keyboard, VGAKEY and so on works normally)
- SMS-threading mode was disabled
- USSD-service was included in ExtraClean version of ROM
- USSD-request's sound was disabled
- CamLoader was excluded from ROM (...links for CamLoader CABs you can find below)
AndreW82_WM6.1_21056_Lite_v1.4
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Contents:
Office (Pocket Word, Pocket Excel)
NetCF3.7.8345.00
"psShutXP"="0_29"
"Black_Keyboard_Skin"=""
"WM5torage"="1_9"
"WLANSettings"="2_3_0_2"
"VersionInfo_MR"="1_1_19131331_0"
"USSD_Service"="4_33_0_0"
"stk_uippc_exe"="4_65_0_0"
"STK_Service"="4_87_0_0"
"SPB_Diamond_Calculator"=""
"SIM_MGR"="6_64_0_2"
"SIMLock_exe"="4_23_0_0"
"Ringtone_Plugin"="1_0_080624_4"
"Redial"="1_2_0_0"
"Power"="2_22_0_0"
"PictureEnhancement"="1_50_18192627_c2"
"PhoneSetting"="6_23_0_3"
"Mute"="1_1_2_0"
"DRM_Middleware"="1_5_19142824_00"
"MicrophoneAGC"="0_91_0_0"
"mHub_VO"="1_7_090609_0"
"TaskManager"="2_1_35096_2"
"HTCUtil"="1_8_3_0"
"Hibernate"="1_4"
"GPS_Quick_Position"="1_0_0_1"
"FMRadio"="1_0_922619"
"Dshow"="2_0_19163629_00"
"DeviceInfo"="1_27_0_0"
"CommManager"="2_7_7_1"
"CheckAutoRun"="2_18_0_0"
"CAMERA"="6_13_32715_0"
"BluetoothSetting"="2_11_0_0"
"AutoRun"="4_31_6_2"
"AltTab"="1_0_0_1"
PagePool: 6 МБ
RAM: ~28 МБ
Storage: ~72 МБ
Download link for WWE
Download link for RUS
AndreW82_WM6.1_21056_ExtraClean_v1.4
Contents:
NetCF3.7.8345.00
"Black_Keyboard_Skin"=""
"WLANSettings"="2_3_0_2"
"VersionInfo_MR"="1_1_19131331_0"
"USSD_Service"="4_33_0_0"
"SPB_Diamond_Calculator"=""
"SIMLock_exe"="4_23_0_0"
"Ringtone_Plugin"="1_0_080624_4"
"Redial"="1_2_0_0"
"Power"="1_22_0_0"
"PowerOffWarning"="1_15_0_0"
"PictureEnhancement"="1_50_18192627_c2"
"PhoneSetting"="6_23_0_3"
"Mute"="1_1_2_0"
"DRM_Middleware"="1_5_19142824_00"
"mHub_VO"="1_7_090609_0"
"HTCUtil"="1_8_3_0"
"FMRadio"="1_0_922619"
"Dshow"="2_0_19163629_00"
"DeviceInfo"="1_27_0_0"
"ClearStorage"="1_38_0_0"
"CheckAutoRun"="2_18_0_0"
"CAMERA"="6_13_32715_0"
"BluetoothSetting"="2_11_0_0"
"AutoRun"="4_31_6_2"
PagePool: 6 МБ
RAM: ~29 МБ
Storage: ~75 МБ
Download link for WWE
Download link for RUS
Attention! Flash this ROM from storage card if yours P3300 has SPL 1.11.0000 or from PC if SPL 1.11.cmon.
AndreW82_CamLoader
CamLoader unloads camera drivers at startup and loads them only when you run Camera application. If you close Camera application, CamLoader will unload camera drivers automatically.
Nice looking rom im gonna flash it now and give some feedback by 8
Andre
Thank you and welcome my friend
test:
was nice and fast rom
Really good rom ima gonna use this one, no bugs at all really fast, excellent job
ferfecir said:
Andre
Thank you and welcome my friend
test:
was nice and fast rom
Click to expand...
Click to collapse
Hi, ferfecir!
pablo34 said:
Really good rom ima gonna use this one, no bugs at all really fast, excellent job
Click to expand...
Click to collapse
Thanx! I'm glad you liked it.
PS. Russian version uploaded, link is in the first post.
Hi AndreW82,
thanx for your excellent ROM. Great job. No probs so far.
And lots of RAM available. I like your ROM very much.
Regards,
John
thanks a lot
was waiting for a lite 6.1 wm rom since long time
flashing--------------.............
Great job brother
Thanks for your hard work
Nice work, mate.
Can you make and M2D version with new Manila 2D v2.0 build 19191432 from HTC Mega?
nemur said:
Nice work, mate.
Can you make and M2D version with new Manila 2D v2.0 build 19191432 from HTC Mega?
Click to expand...
Click to collapse
I'll think about it.
2 ALL: ExtraClean versions WWE and RUS uploaded. Links are in the first post.
Your rom is fast and stable and only thing that missing is m2d.
Simply the best rom ever. Not for the ram.... Not for the speed... But because it can connect to my uni's wifi through cache! congrats dude! Only thing missing if i may say so is Quick GPS as the SeaSGEE doesnt update, at least i think so.
Thanks
Спасибо! Очень понравилась твоя работа - без излишеств. Творческих тебе успехов!
Thank you
Thank you AndreW82 for ROM.....
error 228: Invalid file size
Hi,
When i tried to flash the rom i got error [228]: invalid file size.
I was trying with RUU utility from my pc.
Please advice.
Thanks,
Sudheer
Very good job Andre!
It would really beat with M2D.
sudheer.konudula said:
Hi,
When i tried to flash the rom i got error [228]: invalid file size.
I was trying with RUU utility from my pc.
Please advice.
Thanks,
Sudheer
Click to expand...
Click to collapse
AndreW82 said:
...Attention! Flash this ROM from storage card if yours P3300 has SPL 1.11 or from PC if SPL 1.11.cmon.
Click to expand...
Click to collapse
You need to flash SPL 1.11.cmon first, or you can flash my ROM from memory card.
hey andre i am not able to connect internet in my artemis through dial up from others mobile after flashing your rom becouse bluetooth option is not available in add a new modem connection under connection tab of your rom. so please do something for this problem it is very argent.
hey andre i am not able to connect internet in my artemis through dial up from others mobile after flashing your rom becouse bluetooth option is not available in add a new modem connection under connection tab of your rom. so please do something for this problem it is very argent.
for those who do not know ( as I did not) how to flash via SD card
see
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
which containes this below and other info
Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it from your computer using a card reader, make sure to format in FAT32 and not FAT although in some cases format doesn't work, also it is only necessary to format if your first attempt at flashing fails
Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
Rename the .NBH file to ARTEIMG.nbh and copy it to the root folder of your microSD card.
With microSD card inserted on the phone, start the bootloader (The bootloader is invoked by pressing down the Power & Record buttons and using the stylus at the same time to press the RESET button at the left side), keep both buttons pressed after releasing the reset button.
You should see the screen pictured on the left, confirm flashing on screen by pressing the volume slider down.
Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts. After the flashing process is complete, it will tell you to press any button to continue. After this the bootloader screen with its red/green/blue color is shown. Just reset the device and it will boot the new ROM.
SuperCID devices are able to flash any NBH image using this method.
[X50V] ROM WM6.5 Lite Classic (WWE) - optimized for a 64 M device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My First thanks to Maglite and Football. Maglite was the first to release a custom rom for the x50v, he was the one with Football to explain me about xip & xipport, when I registered to 4pda.ru. I must also thank dking that is always there to solve my issues with the 2700g drivers, he is also from 4pda.ru (the forum that makes you regret that you didn't practice russian enought after learning it at school).
These roms share the same kernel than the x51v's one and are directly derived from them. They are stricly for x50v, the one from the x51v are located here .
This thread is actually a continuation from this one, where I have also released a rom with the last WM6.1 build (dated sept 2009), that like those WM6.5 rom also offers finger scrolling feature. This thread is especially dedicated for 64 Mo devices.
Status of the roms:
Roms (5CFA) 5.2.28002 WM6.5.x WMD branch ( because it's lite it's no more "FingerUI"): classic lite release
A10: WM6.5.x Classic lite(28002) WWEhttp://rapidshare.com/files/315400244/WM50_K_A10_5CFA_X50v_WM65_WWE_lite.nb0.zip
features:
--Showcase.
--dking 2700G driver
--patched Wireless Manager
To add any other WM6.5 feature to the A10 rom try to use x51v A11 5A2D VOIP Professional extended packages (however I haven't check the compatibility).
--This branch has magnifier feature and new contact management.
This rom have a default page pool value of 4.8 Mo and will boot with more than 25 Mo free running with Titanium.
Roms (5574) 5.2.21876 WM6.5.x com2 ("Stylus UI"): classic lite release
A10: WM6.5.x Classic lite(21876) WWE
features:
--dking 2700G driver
--patched Wireless Manager
To add any other WM6.5 feature to the A10 rom try to use x51v A11 5A2D VOIP Professional extended packages (however I haven't check the compatibility).
The roms has a default page pool value of 4.8 Mo. The A11 rom will boot with more than 30 Mo free running with Titanium, you'll get more than 32 Mo if you disable Titanium. You can get even more if you tweak the rom.
(nota) IE6 Mobile is removed from all those roms. UC will install Office Mobile (+ locksreen dpi for 5CFA), and will kick with filesys.exe after reset, You'll have to wait 5 minutes to start benefit the full speed rom (when filesys goes down to 0% of cpu).
You can only flash your x50v with these roms, if your device is running WM5 aku 2.3.1 or higher. If you attempt to flash over a WM2003 bootloader, you will brick your device.
If you like my roms I hope you will make a small donation.
Awesome!
I have been waiting for a 6.5 X50V rom. This device still has life left in it.
Now to just get the 128MB ram upgrade.
Thank You!
Thanks
Downloading...
Will try this with my x50v, as the old 6.1 is not so good.
Thank You very much
Works AWESOME !!!
Very fast and stable, for now TomTom works there fast, as I use x50v as in car navigation system. Do you know how to put TomTom icon/shortcut on today screen?
Great, I already flash wm6.5. It works perfectly. Fast and stable.
Thanks, Makuu
Great! I have been waiting for a very long time for it, many thanks for the hard work!
I will try out. Thanks for your ROM.
Very nice, pretty good for stylusless operation. Love the touch to scroll.
Question: I've been hoping and longing (for a long time) to have the ability to completely turn this thing off, or do a "full power off", like the x51. I only use the device every now and then, and it pisses me off to no end that when I DO go to use it, half the time the battery is dead or almost dead. I had an x51 before this, that I sold, so that I could buy this one. I could go weeks without charging the x51, since I could shut it down, but not so with this here x50v.
Does ANYONE know how to full power off, or completely shut down an x50v with this ROM, or some other ROM? Thanks!
maybe try this: slide2shutdown
As for new ROM it works nice. I dont use device anymore but finally I got there WM6.5 with everything working. I am planning to use it as a mp3 player in my badroom. If I were not a student I would donate. Thank you for your work.
...the one week I decide to leave my X50v at home because I didn't think I'd need it, a super awesome development comes out for it. That's my luck, but I'll be sure to install this on my X50v (currently WM6.1) when I get home next week. It looks incredible!
Wow, great stuff Makuu!
Can't believe my eyes, WM6.5...
Great stuff Makuu!!!
I don't have my X50v anymore but I still want to acknowledge you for your achievements. Well done!
first attempt checksum error
second attempt in progress...
fingers crossed
second attempt image checksum error
third attempt reformat SD card and.... Success!
Ok, I think I need help with getting this to work.
First my setup:
Dell Axim X50v
Windows Mobile 2003 Second Edition v4.21.1088 (Build 14260.2.0.5)
Intel PXA270 CPU
65MB RAM
128MB ROM
A05 (07270500) ROM version
I downloaded the zip file - WM50_K_A10_5574_X50v_WM65_WWE_lite.nb0.zip
I formatted the CompactFlash memory card as FAT32, extracted the files to the memory card and plugged it in the PDA.
I did a Wireless + Power + Reset and the option comes up. But it did not find the flash file.
What am I missing?
Thanks,
tsutton said:
Ok, I think I need help with getting this to work.
First my setup:
Dell Axim X50v
Windows Mobile 2003 Second Edition v4.21.1088 (Build 14260.2.0.5)
Intel PXA270 CPU
65MB RAM
128MB ROM
A05 (07270500) ROM version
I downloaded the zip file - WM50_K_A10_5574_X50v_WM65_WWE_lite.nb0.zip
I formatted the CompactFlash memory card as FAT32, extracted the files to the memory card and plugged it in the PDA.
I did a Wireless + Power + Reset and the option comes up. But it did not find the flash file.
What am I missing?
Thanks,
Click to expand...
Click to collapse
updated the first post:
You can only flash your x50v with these roms, if your device is running WM5 aku 2.3.1 or higher. If you attempt to flash over a WM2003 bootloader, you will brick your device.
Thanks. So how do I do this? Or there is no way to do this?
Cheers.
can i install this ROM if my x50v is running WM6.1 VOIP Professional by makuu?
gedas5 said:
can i install this ROM if my x50v is running WM6.1 VOIP Professional by makuu?
Click to expand...
Click to collapse
Yes, I did it.
hey how to unlock? i have pressed lock and i can't unlock it now i see word 'slide' but don't know what to do...tried tapping the whole screen and still nothing
do'h
it sure looks awesome. only prob is wireless isn't working. i'm connected to my AP, but there's no actual connectivity this is great work, don't want to take away from it! but its not very useful without internets
Wireless works on my device with this rom without any problems.
Hmm, I used the 28002. Did you use the other?
So I noticed there wasnt any tutorial on how to install it and you just had to search all the posts in the froyo x thread to figure it out. Now I have done it this way.Im sure there are tons of other ways.But this one workes for me and I just want to share it. I will try to keep it up to date so everybody can install android on their blackstone.
All credits to Tiad8 and other developers this is not my build!
special thanks to TRNSLN who helped me install froyo so I can help you
Anyway first things first. Is this something for me to use daily? well here is your change to figure out.
My homescreen+menu+latitude
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
proof the camera works
Sample video(shot with blackstone)
http://www.youtube.com/watch?v=OrYAP99pZI4 (embed doesnt work)
screenshot camera app:
sample photo(shot with blackstone) click here for full image
So is this something for you?
whats working and whats not?
wifi/3G/sync =Ok!
market =Ok!
latitude =Ok!
Headphones =Ok!
messaging/calling(call/receive) =Ok!
Bluetooth =testing..
Battery =10/11 hour
Usb =No (at least not with standard app, there have been reports of usb via other program havent tested it yet)
Chapters of this tutorial:
[1]Formatting SD card
[2]Installing Froyo X red
[3]Installing Camera
[4]Finishing up
Downloads
1 Froyo X Red
2 kernel+libs
3 Haret+Startup.txt-Ts-Calibration
4 If having problems with booting android try this startup.txt
[1]Formatting SD card
Easy as pie.
put your memory card in a sd card reader (your blackstone will do fine) and plug it in your pc/laptop.
open My pc and look for your memory card and right click on it.
Click Format
make sure FAT32 is selected and click ok
Ok great Sd card is formatted and ready to go. no lets move on..
[2]Installing froyo X Red /B]
ok first things first download Froyo X Red and Haret+Startup.txt-Ts-Calibration.
Then unpack Froyo X Red to the root of your memory card(root means on your memory card not in an folder on your memory card)
Then open up Haret+Startup.txt-Ts-Calibration and copy all the files to the root of your memory card.
Now unmount your Blackstone or Sd card reader from your pc.Put the Sd card in your blackstone(if it isnt already there) navigate to your storage card and open the file Haret
Now it shoud just give you a bunch of text and a little linux penguin let it load for a while(note: It coud take some minutes so dont think it wont boot)
it shoud boot. now follow the set-up and sync your google account.then turn off your blackstone and reboot it.so it boots in windows mobile again.when its in windows mobile go to the next step!
[3]Installing Camera
so android working accordingly everything set up but still no camera..
its time to change that
download kernel+libs
simply unpack the zip to your memory card..
overwrite zImage
thats that your done. enjoy android with working camera!
[4]Finishing up
this isnt really a neccesary step but I do recommend it.
open up spare parts and set the Window animation and Transition animation to Fast
and your done! have fun with your brand new Android phone..
dont forget to check this thread for updates!
MOD EDIT: Download Links removed!
+1
good idea
thx
Nederlandse computer
I'll wait for NAND on blackstone. I only have one SD and i don't want to format it (music and stuff on it).
Haha Inderdaad nederlander
I will update and finish it this afternoon hope I get to it. And again I dont intent to claim this as my own android build.It is not mine!
oh en kapie je kan je **** backuppen op je pc.Android erop zetten en dan weer alles terug zetten.moeite waard!
kan ik doen, maar waar kan ik die versie van jou (die niet van jou is) downloaden?
Kapie said:
kan ik doen, maar waar kan ik die versie van jou (die niet van jou is) downloaden?
Click to expand...
Click to collapse
Ik ga nu verder met de tut en zal ook een download sectie toevoegen
But lets continue this thread in english
thanks man you make it so easy
mero0100 said:
thanks man you make it so easy
Click to expand...
Click to collapse
haha no problem at all. please post feedback!
u know that you dont have to format the sd card
i have 5 android builds on mine
i never formated it always worked so i dont see the problem
btw my blackstone can run tilt 2 froyo builds
camera wifi?
camera and wifi don!t work???
sonmezufuk said:
camera and wifi don!t work???
Click to expand...
Click to collapse
only camera isnt working.wifi works like a charm!
seems all links for Froyo X Red 2 already died.
can sb upload again? tks.
cuonguq said:
seems all links for Froyo X Red 2 already died.
can sb upload again? tks.
Click to expand...
Click to collapse
they work fine for me?
HI
when i´m going to installing update, copy Haret and Startup but after that i cant execute de haret....tell " not fidedigne....re-install"
what doing wrong?
EDIT: re-formatting and done.....thks
let see ......MMS works ?
ok, i have a little question here: since the sd card needs to be formatted, i want to be prepared. the last time i tried android on the blackstone, was in december with an older froyo version and had a few issues:
since it goes in the root of the sd card and comes with a lot of folders and files, it really messed up my sd card structure, which i need for winmo, i want to continue using both os. is it possible to partition the sd card to split up android from winmo?
say, i'd split up 2gb as a primary partition for android and another 6gb for music and videos... so that in case i need to format the sd card again for newer android builds, i only need to format one partition?
also, does winmo recognize this as 2 sd cards, so i can still run AutoInstall, 2577 and other stuff from either partition? (assuming that android will be the first partition, winmo needs access to the 2nd partition)
edit: never mind, figured it out. due to the fact that windows only recognized the first logical or primary partition of an sd card as a drive, you can assign a drive letter to, it all became much too complicated, since i would have needed constant access to both partitions. therefor, i copied haret and all the android stuff in the folder "andboot" on the sd card and run it from there without messing up too much of my existing structure. also, this release is so stable, i probably won't encounter the same issues as before and don't need to fear major hangups and hard resets.
Internet problem
hi all,
successfully installed android to my phone but cannot connect to internet.
anyone can help here.. thanks
Froyo X Red 2 file is corrupt
bassiebal your bassiebal your Froyo X Red 2 file is corrupted, can you send me a good one.
Thanksfile is corrupted, can you send me a good one.
Thanks
thanks man you make it easy
ARCHITORTURE said:
bassiebal your bassiebal your Froyo X Red 2 file is corrupted, can you send me a good one.
Thanksfile is corrupted, can you send me a good one.
Thanks
Click to expand...
Click to collapse
glad everyone is succesfully installing android. as for architorture. do you mean you cant download or cant extract? and is anybody els having this problem?
Hi all,
thanks for this guide is very easy. Can you tell me what is the root password I would like to install "Smb File Sharing".
Thanks