Hi there all, I have a problem which is a bit annoying, the battery meter in the taskbar always displays a full battery. Is there some sort of registry tweak i can do to get it back to normal.
I noticed it stopped working after installing HTC Home Customizer V0.8b by 'emunutz'
Under the options tab in the HTC Home Customizer there is an option to always display clock in the titlebar, since selecting this and then turning it off, my battery meter stopped working.
Anyone got any ideas?
Thanks!
un-install the htc customizer and soft reset, see if it goes back to normal
sometimes ive found 2 programs can conflict with each other and cause a glitch in the system
Hello, thanks for the reply, i done a fix around for it. I installed Batterystaus plugin for the homescreen and have the clock displayed in the taskbar.
patterns said:
un-install the htc customizer and soft reset, see if it goes back to normal
sometimes ive found 2 programs can conflict with each other and cause a glitch in the system
Click to expand...
Click to collapse
Hi,
i have done that but the problem still persist. i tried looking for a reg tweak but unable to do so.
Related
after installing ozvga and trying it out i have the following problems.
now in regular sevga mode the number keys in the phone app are missing
in ozvga mode the volume button is missing trom the top. and the slider ont he side controls something else now.
any help in fixing these ??
thanks in advance team.
i've searched the forum for hours and hours. just talk of how to install big phone. also i found a thread where everyone was asking that first question. no asnwer.
OzVga problem...
I have the same problem, with a little investigation this is what I turned up. Our OzVga problem has to do with the volume/speaker icon not coming through in VGA mode. The slider seems to be attached to the first icon on the taskbar to the left of the clock. Which in this case is the signal strength/phone icon - which incidentally doesn't display properly on my phone . Which means the slider toggles the phone message box open at the moment. I think the problem has to do with cemail.vol not having a cemail.96.vol counterpart and the phone then gets confused... Helmi or Buzzdev could you please look into this problem or alternatively could someone with a working version of OzVga please post a link to a working version of the cemail.96.vol file to this thread.
Thanks.
what about the phone buttons, then you return to normal res mode, are the phone buttons missing?
Screen buttons...
No I didn't seem to be missing the phone buttons when I switched to SeVGA, however I got so annoyed about this problem that I switched to Helmi's WM6 v1.1 ROM. So far I haven't had any of these problems with it, though I do miss HTC's task manager...
the phone buttons problem i fixed finally, i just had to uninstall vj's bigphone
yeah i'm silly.
the audio slider problem sucks though, i really like ozvga mode, but the problem renders it unusable for me.
I installed HTCustom primarily to remove the SMS notification, but I've found it's broken other things. The title bar of the home screen can no longer display the battery information. When I tell it to show the battery information, I just get a blank section of the bar that cuts off half the reception logo, and completely hides the volume icon.
Uninstalling doesn't resolve the issue.
I can set it to display the time or date, and it seems to work, but that's useless, because I already have that information on the screen. The battery info is much more important.
Could any tell me what I need to do to either completely remove the application and remove any changes it made, or at least how to get my battery to display on the title bar correctly?
I'm running Black 4.0, and I don't really want to have to just reflash my PDA to fix this problem.
Kinda annoyed :/
Thanks for any help in advance
Mr_Snuffle said:
I installed HTCustom primarily to remove the SMS notification, but I've found it's broken other things. The title bar of the home screen can no longer display the battery information. When I tell it to show the battery information, I just get a blank section of the bar that cuts off half the reception logo, and completely hides the volume icon.
Uninstalling doesn't resolve the issue.
I can set it to display the time or date, and it seems to work, but that's useless, because I already have that information on the screen. The battery info is much more important.
Could any tell me what I need to do to either completely remove the application and remove any changes it made, or at least how to get my battery to display on the title bar correctly?
I'm running Black 4.0, and I don't really want to have to just reflash my PDA to fix this problem.
Kinda annoyed :/
Thanks for any help in advance
Click to expand...
Click to collapse
Is there a reason why you didn't post in the 'HTCustom Thread'?
Cause I didn't see it
Nevermind, I had an older version installed. Seems to be working okay now
Was running ATT WM5 and all was well. Flashed to Offical ATT WM6 using SPL2.1. Now I'm at ROM 3.62.502.3 1.54.07.00 32.86u.7020.23H. At this point, still ok. Installed PPTFix to remap button 5 to Voice Speed Dial and setup Plantronics head set. Still ok. Added some email accounts and a customized background. All ok. Synced Contacts, Notes, etc. Still ok. Decided I didn't like the Comm and Battery Icons on the bottom tray and ran MobileRegistryEditor and changed values from 1 to 0. Still ok the rest of afternoon and last night.
Got up this morning, did a soft reset, and everything went to hell. Booted normally up to the green Windows screen, then hung there for 3 or 4 minutes. Finally got to the Today screen, but all apps run like honey on a cold morning. I can use VoiceCommand to place calls and I can Dial out Manually, but if I tap my contacts button, no contacts show up. Email won't send/receive, but I can get incoming calls. Today screen shows correct appointments and task, but tap Calandar and they don't show up there.
Before I do anything else, I wanted to get some ideas on where to start.
Pretty sure hiding the comm manager was your problem
I'm pretty sure hiding the comm manager icon was your problem, I've heard there are numerous problems when you hide the comm manager icon. Change that key back and see if your problems go away.
KarhU said on the ROM benchmark :
6. Never hide the WirelessManager Tray Icon at the bottom.
Don't believe me?
Try it and feel the difference.
This is the key:
[HKEY_LOCAL_MACHINE\Services\WirelessMgr]
"Keep"=dword:00000000 ;<--- (dword:00000000 to hide and dword:00000001 to show)
Yeah, I've seen this issue in many of the recent WM6 ROM Threads. It's a true shame, since it means we're stuck with having to keep the bottom tray visible. I (for one) do not like that waste of screen space.
Too bad the fix for this anomaly is so elusive.
-pvs
Thanks for the help. It looks like the Comm Mgr icon may have been the problem. My 8525 wouldn't connect to the Internet, Email or (thru Active Sync) to my desktop. Finally went into Settings/System/Clear Storage and it completely reloaded WM6. Reinstalled all my extra apps and things are fine. Of course I haven't tried to edit the registry and get rid of those bottom icons, and I don't think I'm going to. If anyone finds a sure method to get rid of the bottom system tray, please post.
Hey guys, Ok I know that S2u2 and S2P are intended for touch screens. However, I was able to get S2u2 to work perfectly with a few minor registry changes. I would like to use S2P (another one of A_C programs), but I have not been able to get it to work. I am using version .40 and have found no registry keys that can help. Does anyone have any ideas? It looks like a cool program to incorportate with S2u2. Thanks for the advise.
John123456789 said:
Hey guys, Ok I know that S2u2 and S2P are intended for touch screens. However, I was able to get S2u2 to work perfectly with a few minor registry changes. I would like to use S2P (another one of A_C programs), but I have not been able to get it to work. I am using version .40 and have found no registry keys that can help. Does anyone have any ideas? It looks like a cool program to incorportate with S2u2. Thanks for the advise.
Click to expand...
Click to collapse
How did you get s2u2 to work exactly, can you share which version you used and the reg settings? If i can get that going, I'll try to help you with the s2p.
The version of S2u2 is v1.01. When I first installed it it seemed to work but the default setting is to shut the phone off after 30 seconds of being locked so I changed that setting
hkey current user\ Software\ A_C\ S2u2\ OffLCD=17
OffLCD should be 0
THe other settings are just cosmetic. I changed the clock setting to "h" instead of "HH" so it wouldnt show military time. And I changed the file path in hkey current user\ Software\ A_C\ S2u2\ wallpaper to point to .gif files for animated wallpaper.
Thanks a bunch for the help. I really like the look of s2u2 and I think that you will to.
I also got S2U2 to work. The only problem,,,, and this is a BIG problem for me, is that the S2U2 "screensaver" would not stay on infinitely for me. If i had the phone setting there for a while and "woke up" the screen i saw that the s2U2's program was not running in the foreground and showed me the default homescreen. It was still running, however, in the background since i saw it in task manager. If i clicked on it again in task manager, the program started right back up. I'm not sure if this is a conflict of another program ( like smarttoolkit, or the weather app, or photo contacts pro) or if it's because it wasn't made for smartphones. I would love to get a fully ported version for WM 6.1 standard though.
I am still running 6.0. This could be why I have had a different result with
S2u2.
why don't u guys post what others ppc apps that works on dash??
I tried the s2u2 v 1.05 and my phone doesn't like it, maybe i had the settings wrong. I installed and then tried to run ilock, and got error. I could run s2u2 and start the lock manually though. Once i locked it, if i pressed any key, the display would light up. If i was on battery power and pressed the center key to wake it up, then the display would not come on at all , but my keypad lights would and it would lock up my phone and get stuck like that until i removed the battery. I thought I disabled it, but then I got a phone call and the slide to answer screen came up(without the slide though) and then i couldn't unlock the phone and had to pull the battery again. I finally uninstalled. Is there some reg settings that are mandatory to get it to work or is it just that buggy on smartphones?
The only reg change thats manditor is the offlcd=0. I am using V1.01. I wonder if that could be part of the issue. It never did that for me but I am on the old 6.0.
John123456789 said:
The only reg change thats manditor is the offlcd=0. I am using V1.01. I wonder if that could be part of the issue. It never did that for me but I am on the old 6.0.
Click to expand...
Click to collapse
yeah, I did the offlcd=0, because without it when I manually ran it, it turned power completely off, like you said earlier. I couldn't find the 1.01 version.
showaco said:
yeah, I did the offlcd=0, because without it when I manually ran it, it turned power completely off, like you said earlier. I couldn't find the 1.01 version.
Click to expand...
Click to collapse
pm me...i have 1.01 if you want it
Ok, got 101, now no more glitches, so it was problems caused by 1.05. But s2p doesn't seem to have a chance without dpad controls available. On the s2u2, how come it doesn't autoset when display turns off? Is there a reg setting for this? And is it just me, or is the display supposed to light up whenever a key is pressed. I still have to unlock for the key to work, but I can't have the display turning on whenever I accidentally touch a key.
Hi!
I have installed both Gyrator 2 and Galarm 1.2.3 in my blackstone.
When the alarm rings both snooze actions when 'when device turned down' and 'when you shake the device' do not work.
I know that it is because of Gyrator.
Is there a fix on this?
g
Hi!
I think Version 1.03 of Galarm is working good with shake for closing program also with screen off
FYI. There's a new version - 1.2.4. But same problem, tilt sensor feature doesn't work.
I 've heard that this problem is solved if you differentiate some settings in the Gyrator application.
Anyone with a hint on this?
g
Hey guys, there's a new version GAlarm 1.4. The tilt sensor feature is working great!!
http://www.ageye.de/index.php?s=download
the new version seems working ok.
thank you
g
The last app I installed was Galarm. I did this last night.
Since then I have had a few problems with my HD.
1) twice since midnight last night I have used TF3D to access settings > communications, before loading the communications screen the device hangs, then I hear the default beep randomly and untill I perform a soft reset.
2) Soft key menus have been very buggy all through the OS. Most noticable in Opera, and Coreplayer. Taping the soft key menu results in just an outline being shown while the actual menu is transparent.
While installing Galarm it asked me if it could fix a known bug, I allowed it to. But am now wondering if this could have been the cause?
I'm not blaming Galarm per se, but it is the last piece of software that I installed. Has anyone else had similer problems?
Noodled24 said:
The last app I installed was Galarm. I did this last night.
....
2) Soft key menus have been very buggy all through the OS. Most noticable in Opera, and Coreplayer. Taping the soft key menu results in just an outline being shown while the actual menu is transparent.
....
Click to expand...
Click to collapse
Yes I get the same menu problems, if you press up or down then the menu choices appear but often vey corrupted. I stopped using Galarm for a couple of days and I never had the problem, I used it this mornning and my menus got corrupted again. At the same time I get my start menu appearing blank (transparent). I'm going to download another clock program and use it for a month then I'll switch to Galarm for a definitive test.