Related
Has anyone else experienced this problem with their P3300?
Unpredictably, the screen on my P3300 will fail to come back on after I have shut the device off with the power button. I know the device is on because the hardware buttons light up when pressed, but the screen appears almost completely dark and won't come back on when tapped. The only way to get the screen back to normal function is to get to the backlight settings and adjust them. This seems to return the device to normal function...until it randomly happens again. I'm seeing this about two or three times a day.
At first, I thought I needed to soft reset - and this worked - I then just went to the backlight settings to modify them and got back normal function for a while. The strange thing was that after the screen issue and the soft reset, my backlight settings for battery power were on "brightest" - and they wern't there before the issue popped up.
Now I have a WA2 shortcut on my top bar that goes to backlight settings. I know approximately where it is on the screen, so when the issue pops up and the screen is pitch dark, I can tap in that general area and get to backlight settings. The screen is still dark, but I can just make out the backlight slider enough to adjust it from there and avoid the soft reset.
So, basically, it seems as though my backlight settings are randomly resetting themselves to the lowest setting every once in a while after power off. Anybody else with an Artemis seeing this? Seems a little similar to the first of the three questions in this thread, but not exactly the same:
http://forum.xda-developers.com/showthread.php?t=281763
Any help or empathy would be appreciated!
I've had that, too. I assume the program for the allocation of the soft keys has a bug. You had to HARD RESET, and dont change the soft keys any more.
I've read some more about this issue and it seems it is a WM5 bug that is seen across devices. I guess I can hope they will address it at some point in a future ROM release. Thanks for the suggestions anyway.
Check this out for more info:
http://www.sbsh.net/forums/index.php?showtopic=12842
Sleep Mode
What you are describing sounds like sleep mode
" Quickly pressing the POWER button turns off the display temporarily and switches your device to sleep mode. Sleep mode suspends your device to a low power state while the display is off in order to save battery power "
Click to expand...
Click to collapse
(Taken from MDAC3 Manual)
Pressing the power button again should bring it out of Sleep Mode. If it is getting stuck then it is possibly a bug affecting the sleep mode.
Hi!
Any news on this issue? My phone is acting just like described in this thread (and no, this is not standby/sleep mode)
PK
This only hapen to me after a soft reset. And the only way i found to "fix" the problem was after every soft reset going to Settings>Backlight move the brightness bar up and down. And after that it never blocks the light again until the next soft reset. Sometimes when connected to usb it blocks too but if you always go to the backlight, befor e the light goes off, and move the bar it wont block anymore...Its not a real solution but the only way i found...
Imaginati0n said:
This only hapen to me after a soft reset. And the only way i found to "fix" the problem was after every soft reset going to Settings>Backlight move the brightness bar up and down. And after that it never blocks the light again until the next soft reset. Sometimes when connected to usb it blocks too but if you always go to the backlight, befor e the light goes off, and move the bar it wont block anymore...Its not a real solution but the only way i found...
Click to expand...
Click to collapse
Yeah, that is all I am doing too. Hopefully HTC is noticing this problem too and a future ROM release will alleviate the problem. Perhaps a Crossbow upgrade someday????
I have the same problem. I found out that it happens when PhoneAlarm switches my profile from work to home.
Solution!
Check this thread out:
http://www.pocketmax.net/smf/index.php?topic=3324.0
As stated above, looks like PhoneAlarm is the culprit. I use it and I would bet that everyone posting in this thread does too. In fact, Bruce from PocketMax has even listed the Artemis Backlight corruption issue as a fixed item in his latest release, v1.57 available here:
http://www.pocketmax.net/phoneAlarm.html
Once you download and install, make sure to go the the backlight % setting in each of your profiles and select "Leave Unchanged". This alleviates the problem. My Artemis no longer goes blank without backlight slider manipulation after a soft reset!!! One less thing to worry about!
I had the same problem ... I try your solution and make a feed back
I too have had this problem and have PA installed - I'll also apply the solution and report findings . . thanks for sharing.
Hi!
I installed the PA 1.57 upgrade, but it did not help... But it seems like the backlight settings on the Artemis device is not standard, so I uninstalled Spb GPSR monitor (who has a backlight setting option), and then the problem disappeared.
PK
Looks like any program you have installed with a backlight setting option needs to be adjusted not to change the backlight settings in order for things to work properly for the time being. I'm sure that software developers will adjust to this new device soon just as PA has. Thanks for the feedback!
hi,
i have PA 1.58 (build 100), and the reminders for missed calls not work properly. the orange led is blinking, but the vibration and the sound are
not played (i have set the alarm reminder to 1 x 5 min x endless)...
please, test and indicate to me if this function works on your artemis...
the reminders for sms works fine.
thank's
Ahqar said:
Pressing the power button again should bring it out of Sleep Mode. If it is getting stuck then it is possibly a bug affecting the sleep mode.
Click to expand...
Click to collapse
In other forums they have this 'problem' too, and all of these people had SPB Pocket Plus installed. My guess is that it is a backlight setting in that program. You can temporarily get the backlight back on by connecting the phone to the pc through ActiveSync, and change the settings accordingly.
Hard- or softresets shouldn't be necessary to solve this.
@phonealarm users,
you can fix the unserious backlight bug if you are using at least v.1.57 or higher and set all backlight settings (battery and pluged) in used profiles to the option < LEAVE UNCHANGED >
@all
happy new year!
Ok! so i am not alone! a couple of times i did face this situation. the screen doesnt come up, but the device is on, and i am able to see a slight silhoute of the icons, very very light. and i have to do a softreset to get it back on.
bmod said:
@phonealarm users,
you can fix the unserious backlight bug if you are using at least v.1.57 or higher and set all backlight settings (battery and pluged) in used profiles to the option < LEAVE UNCHANGED >
@all
happy new year!
Click to expand...
Click to collapse
Yep, that´s it! In every app offering different profiles (like PocketZenPhone, PA, etc.) Settings for Backlight (including Minutes to switch off) must be exactly the same in each profile! Maybe <Leave unchanged> will work, too!
bmod said:
@phonealarm users,
you can fix the unserious backlight bug if you are using at least v.1.57 or higher and set all backlight settings (battery and pluged) in used profiles to the option < LEAVE UNCHANGED >
Click to expand...
Click to collapse
Hey Guys,
We appreciate the posts about Phone Alarm, but if you just read this entire thread before posting you would have seen that this is old news and this issue was resolved in post #9!
Thanks anyway!
Oh, and Happy New Year as well!
hi,
please, tell me if pa reminders for sms and missed calls work fine in your p3300.
i have installed spb pocket plus and pa and the reminders for pa not work now.
please, if this combination works for you, explaine your config settings.
thank's
Hey guys, Ok I know that S2u2 and S2P are intended for touch screens. However, I was able to get S2u2 to work perfectly with a few minor registry changes. I would like to use S2P (another one of A_C programs), but I have not been able to get it to work. I am using version .40 and have found no registry keys that can help. Does anyone have any ideas? It looks like a cool program to incorportate with S2u2. Thanks for the advise.
John123456789 said:
Hey guys, Ok I know that S2u2 and S2P are intended for touch screens. However, I was able to get S2u2 to work perfectly with a few minor registry changes. I would like to use S2P (another one of A_C programs), but I have not been able to get it to work. I am using version .40 and have found no registry keys that can help. Does anyone have any ideas? It looks like a cool program to incorportate with S2u2. Thanks for the advise.
Click to expand...
Click to collapse
How did you get s2u2 to work exactly, can you share which version you used and the reg settings? If i can get that going, I'll try to help you with the s2p.
The version of S2u2 is v1.01. When I first installed it it seemed to work but the default setting is to shut the phone off after 30 seconds of being locked so I changed that setting
hkey current user\ Software\ A_C\ S2u2\ OffLCD=17
OffLCD should be 0
THe other settings are just cosmetic. I changed the clock setting to "h" instead of "HH" so it wouldnt show military time. And I changed the file path in hkey current user\ Software\ A_C\ S2u2\ wallpaper to point to .gif files for animated wallpaper.
Thanks a bunch for the help. I really like the look of s2u2 and I think that you will to.
I also got S2U2 to work. The only problem,,,, and this is a BIG problem for me, is that the S2U2 "screensaver" would not stay on infinitely for me. If i had the phone setting there for a while and "woke up" the screen i saw that the s2U2's program was not running in the foreground and showed me the default homescreen. It was still running, however, in the background since i saw it in task manager. If i clicked on it again in task manager, the program started right back up. I'm not sure if this is a conflict of another program ( like smarttoolkit, or the weather app, or photo contacts pro) or if it's because it wasn't made for smartphones. I would love to get a fully ported version for WM 6.1 standard though.
I am still running 6.0. This could be why I have had a different result with
S2u2.
why don't u guys post what others ppc apps that works on dash??
I tried the s2u2 v 1.05 and my phone doesn't like it, maybe i had the settings wrong. I installed and then tried to run ilock, and got error. I could run s2u2 and start the lock manually though. Once i locked it, if i pressed any key, the display would light up. If i was on battery power and pressed the center key to wake it up, then the display would not come on at all , but my keypad lights would and it would lock up my phone and get stuck like that until i removed the battery. I thought I disabled it, but then I got a phone call and the slide to answer screen came up(without the slide though) and then i couldn't unlock the phone and had to pull the battery again. I finally uninstalled. Is there some reg settings that are mandatory to get it to work or is it just that buggy on smartphones?
The only reg change thats manditor is the offlcd=0. I am using V1.01. I wonder if that could be part of the issue. It never did that for me but I am on the old 6.0.
John123456789 said:
The only reg change thats manditor is the offlcd=0. I am using V1.01. I wonder if that could be part of the issue. It never did that for me but I am on the old 6.0.
Click to expand...
Click to collapse
yeah, I did the offlcd=0, because without it when I manually ran it, it turned power completely off, like you said earlier. I couldn't find the 1.01 version.
showaco said:
yeah, I did the offlcd=0, because without it when I manually ran it, it turned power completely off, like you said earlier. I couldn't find the 1.01 version.
Click to expand...
Click to collapse
pm me...i have 1.01 if you want it
Ok, got 101, now no more glitches, so it was problems caused by 1.05. But s2p doesn't seem to have a chance without dpad controls available. On the s2u2, how come it doesn't autoset when display turns off? Is there a reg setting for this? And is it just me, or is the display supposed to light up whenever a key is pressed. I still have to unlock for the key to work, but I can't have the display turning on whenever I accidentally touch a key.
Hi!
I have installed both Gyrator 2 and Galarm 1.2.3 in my blackstone.
When the alarm rings both snooze actions when 'when device turned down' and 'when you shake the device' do not work.
I know that it is because of Gyrator.
Is there a fix on this?
g
Hi!
I think Version 1.03 of Galarm is working good with shake for closing program also with screen off
FYI. There's a new version - 1.2.4. But same problem, tilt sensor feature doesn't work.
I 've heard that this problem is solved if you differentiate some settings in the Gyrator application.
Anyone with a hint on this?
g
Hey guys, there's a new version GAlarm 1.4. The tilt sensor feature is working great!!
http://www.ageye.de/index.php?s=download
the new version seems working ok.
thank you
g
The last app I installed was Galarm. I did this last night.
Since then I have had a few problems with my HD.
1) twice since midnight last night I have used TF3D to access settings > communications, before loading the communications screen the device hangs, then I hear the default beep randomly and untill I perform a soft reset.
2) Soft key menus have been very buggy all through the OS. Most noticable in Opera, and Coreplayer. Taping the soft key menu results in just an outline being shown while the actual menu is transparent.
While installing Galarm it asked me if it could fix a known bug, I allowed it to. But am now wondering if this could have been the cause?
I'm not blaming Galarm per se, but it is the last piece of software that I installed. Has anyone else had similer problems?
Noodled24 said:
The last app I installed was Galarm. I did this last night.
....
2) Soft key menus have been very buggy all through the OS. Most noticable in Opera, and Coreplayer. Taping the soft key menu results in just an outline being shown while the actual menu is transparent.
....
Click to expand...
Click to collapse
Yes I get the same menu problems, if you press up or down then the menu choices appear but often vey corrupted. I stopped using Galarm for a couple of days and I never had the problem, I used it this mornning and my menus got corrupted again. At the same time I get my start menu appearing blank (transparent). I'm going to download another clock program and use it for a month then I'll switch to Galarm for a definitive test.
Hi All,
Does anyone know how to get this working on our beloved HD's? I hate the way the screen goes completely black during a call, we can't use the light sensor to tell the phone that the call has finished and it is away from your ear (so screen comes back on a la iphone), and i keep doing things during a call with my ear!!
So this seems like the ideal solution - but i can't get it to work!!
I've copied over the file to the windows folder, then soft reset. Changed the registry entry for phoneLockEnable to 1 in HKLM/Software/HTC/Phone but still no joy!
All help would be greatly appreciated.
Regards
DF
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
chanmama said:
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
Click to expand...
Click to collapse
Sorry, i don't have the cab file, i just saw the screenshot and thought 'that's what i need'!!!
Hopefully some bright spark here can help us both (and others probably).
Regards
DF
Beside this transparent canvas, where can I get the orginal canvas?
I am using a offical ROM but I don't see this function!
I hate the way the screen goes completely black during a call, we can't use the light sensor to tell the phone that the call has finished and it is away from your ear (so screen comes back on a la iphone), and i keep doing things during a call with my ear!!
Click to expand...
Click to collapse
that's interesting, because my screen doesn't go blank during calls and it happens quite often that i accidently disconnect a call (i suppose because i hit a button with my ear).
so in search for i solution i found in Advanced config a tab Light sensor > Light sensor polling which i set enabled. the explanation says "uses light sensor to automatically turn screen off when the phone come near from your ear to answer a call". so this should set it like the i-phone does, right?
hence when i tested it, the screen still was on, even when i put my thumb onto the light-sensor.
is this because i don't have a stock rom (i use Duttys HD V1.9b XTREME) or is there something i can do about it.
it would be really nice to have the screen locked when i answer a call and to outomatically unlock it if i remove it from my head to use some function on the screen..
take55 said:
that's interesting, because my screen doesn't go blank during calls and it happens quite often that i accidently disconnect a call (i suppose because i hit a button with my ear).
so in search for i solution i found in Advanced config a tab Light sensor > Light sensor polling which i set enabled. the explanation says "uses light sensor to automatically turn screen off when the phone come near from your ear to answer a call". so this should set it like the i-phone does, right?
hence when i tested it, the screen still was on, even when i put my thumb onto the light-sensor.
is this because i don't have a stock rom (i use Duttys HD V1.9b XTREME) or is there something i can do about it.
it would be really nice to have the screen locked when i answer a call and to outomatically unlock it if i remove it from my head to use some function on the screen..
Click to expand...
Click to collapse
Hi take55,
Yes, i'm aware of the advanced config tweak (also in HD Tweak), and as you correctly state, the screen should/will go blank on call connection (i'm running kwbr's A Touch Of HD 3.3.4 and mine doesn't, even with tweak applied!!).
Unfortunately, when the call ends and you move the phone away from your ear, the screen still stays blank????? I've read somewhere on these forums that it never will work like the iphone (not sure why, as the light sensor should recognise that we've moved the phone away from our ears).
So that is why i'm trying to get this other method to work. What i have noticed is that with the bmp copied over to the windows folder or with a cab i found by A-Math installed, my dialler locks up after every call (as if the transparent phone lock is in place) but i can't actually see it. None of the screen works and i have to soft reset. Maybe something is stopping the bmp to show on the phone....who knows.
It also might be the fact that this was designed for the Diamond (found the cab on the Diamond forums).
Just hoping some genius here might now how to sort this.
I've attached the cab file i've found, give it a try and see if you have the same issue as me.
Regards
DF
chanmama said:
hi, where you found out this software? it look's great, can you share the link to me? recall i saw some post like this, but just for diamond, i'm looking one for my hd, is there anyone have?
Click to expand...
Click to collapse
Hi chanmama,
Found the cab file for you, see previous post.
Regards
DF
Datafanatic said:
What i have noticed is that with the bmp copied over to the windows folder or with a cab i found by A-Math installed, my dialler locks up after every call (as if the transparent phone lock is in place) but i can't actually see it. None of the screen works and i have to soft reset. Maybe something is stopping the bmp to show on the phone....who knows.
Click to expand...
Click to collapse
It has nothing to do with the BMPs but with the registry setting that the CAB also makes. It sets HKLM\Software\HTC\Phone\PhoneLockEnable to 1, in wich case you'll have to press the power button to unock (no need to soft reset). For the BMP to work the phone/dialer software will have to support it, otherwise it just locks the phone in the usual way: black screen, power button to unlock.
Datafanatic said:
Hi chanmama,
Found the cab file for you, see previous post.
Regards
DF
Click to expand...
Click to collapse
tks but your cab only for the canvas skin only, do not contain the original software (slidable canvas), anyway, tks for your help
I've also found this problem to be quite annoying during a phone call but have found some sort of way to deal with it.
Firstly my ROM isn't tweaked, its just the basic one already installed.
After a call is connected, the screen switches off. But if you need to access the screen again during a call, I just press the "Back Arrow" key, one of the four hard buttons on the bottom which brings the screen back up again.
If you press the phone button instead whilst the screen is off, the screen lights up again but it puts the call on hold.
This probably isn't the best way to deal with this, but it seems to work for me for the time being, hope this helps anyone else here.
rubbermonkey123 said:
I've also found this problem to be quite annoying during a phone call but have found some sort of way to deal with it.
Firstly my ROM isn't tweaked, its just the basic one already installed.
After a call is connected, the screen switches off. But if you need to access the screen again during a call, I just press the "Back Arrow" key, one of the four hard buttons on the bottom which brings the screen back up again.
If you press the phone button instead whilst the screen is off, the screen lights up again but it puts the call on hold.
This probably isn't the best way to deal with this, but it seems to work for me for the time being, hope this helps anyone else here.
Click to expand...
Click to collapse
Useful info - I found this particularly annoying yesterday during a ouple of calls.
Also discovered Gyrator tries to turn the phone screen and was laggy - which was even more annoying!
Everyone!!!
CHECK THIS OUT - http://forum.xda-developers.com/showthread.php?t=489034
Answer to all our prayers - a screen lock which uses the g-sensor and not the light sensor.
Now, when a call is connected, holding the phone to the ear blacks the screen, but when you bring the phone down (to use the keypad or something), THE SCREEN COMES BACK ON!!!!!!!
Tried and tested on kwbr's A Touch Of HD v3.3.4 (probably the best manila2 ROM out there!)
Regards
DF
I've been playing with my new Touch Pro 2 for a couple of days. Very nice device, but like any new technological tool it's taking some time to learn my way around.
There are two silly little things about the software keyboard (Touch Input for Pocket PC v2.1) that are driving me insane:
Firstly, it gives a little vibration feedback with each keypress that, for the life of me I cannot figure out how to turn off.
Secondly, I cannot work out how to make the keyboard drop down and disappear - with my old TytnII pressing the little keyboard icon on the screen would drop away the keyboard, but now it brings up a menu page (and there's no menu option either!).
I'd really appreciate some help on these two things - I'm sure it will turn out to be something painfully obviouse!!!
Thanks!
Solution to 1 problem!
Just in case anyone finds themselves in a similar situation, the keyboard can be dropped down again by pressing the keyboard icon on the middle-bottom of the screen BUT it must be pressed on the left side of the icon in Windows 6.5.5. (If you press the right side of the icon you get the menu options - I think this is a result of the old option arrow being hidden under the keyboard icon in 6.5.5 ROMs).
Still no solution to turning off the vibration. I now think it's an error (one of many) in the cooked ROM as the menu item seems to be just missing!
...and solved the other problem
again, just posting this in case anyone reads this thread later in hope of answers!
So, it seems some smart cookie at HTC decided weshould be allowed to turn off the keyboard vibrations (we clearly can't be trusted with such important decisions!) so there is no way to do it from the menus.
Luckily Miri developed a tool to control this on the HD2, and from my initial trial of the disabling cab on the touch pro 2, it seems to work.
Downloads and thread here:
http://forum.xda-developers.com/showthread.php?t=614006