Develop Bugs

WM5 and X-backup

How do i get my information back that i saved with X-backup? As far as i can see there isnt a program called that in WM5, and i have hole my calender in it.
Can i get X-backup somewhere?
--
Zalasta Quikos
Qtek 9090 with 5.03.02WWE

this might be possible if someone has the .exe file from a previous os. tho someone would have to try it out either by saving content from wm55 and backing up from wm2003se. I'd like to know if it can be done.

I have tried xbackup.exe from himalaya rom dump. it does not work.

KTamas said:
I have tried xbackup.exe from himalaya rom dump. it does not work.
Click to expand...
Click to collapse
what about the one from BA 2003se rom?? :shock:

joey jojo said:
KTamas said:
I have tried xbackup.exe from himalaya rom dump. it does not work.
Click to expand...
Click to collapse
what about the one from BA 2003se rom?? :shock:
Click to expand...
Click to collapse
I don't think that will work. XBackup tries to read the data from the storage memory (RAM) which is does not exists anymore cause we have persistant storage (ROM) now. If someone has xbackup from 2003se i can try it anyway...but i bet it wont work.

XBackup tries to read the data from the storage memory (RAM) which is does not exists anymore cause we have persistant storage (ROM) now.
Click to expand...
Click to collapse
ok, i will be honest here, what the hell does that mean????
is that why my memory is like really low???
cos my memory only seems to be only 43.26 MB with 27.23 MB free
while it says program mem is 123.15 mb and 96.85 free

Has anyone given Sprite backup a try yet?

Im sorry but does that mean that i cant get my calender back?

Zalasta said:
Im sorry but does that mean that i cant get my calender back?
Click to expand...
Click to collapse
I'm afraid yes, unless you downgrade to WM2003SE than sync with Outlook the re-upgrade to WM5.

WM6 is coming :)

Fasten seat belts and prepare to catch WM6 for HTC Artemis

Here is Official(not hand made) Artemis WM6 OS dump!!!
Please do not ask me about anything!
I will not comment anything.
http://uploaded.de/?id=5g88lr - ROM ver 1.38
http://uploaded.de/?id=f1zt2f - flasher for SuperCID devices only
http://uploaded.de/?id=2qok1e - Artemis Another WM6 Rom ver 3.5 - not coocked - for SuperCID devices only
All in you hands!
Enjoy!

Well aren't you just a little treasure trove.
Have you looked at this Tupisdin?
Comments on this vs. home made ROMs, any applications installed?
Media Hub etc?

I do not know! I do not have device right now on hand.
I will upload SUPERCID flasher later.

From where did you get hold of this?

Asking questions although he said he would not answer them. Interesting....
I am curious to see the review from the first brave soul willing to try this out. It does seem peculiar that the phone image on the RUU is not the Artemis.

itschase said:
Asking questions although he said he would not answer them. Interesting....
Click to expand...
Click to collapse
Ha, Good point, but I did take that to mean 'don't ask how I got it' more than don't ask any questions.

Gajet said:
Ha, Good point, but I did take that to mean 'don't ask how I got it' more than don't ask any questions.
Click to expand...
Click to collapse
No, that wasn't to you, the guy who blatantly asked...where did you get this.
BTW - I flashed USPL to my phone, tried the RUU version of this update and it said the file is corrupt. I take that to mean the file is not meant for my phone. The first of the two downloads has a file called OS.nb. That must be where I need to focus my attention. I will update if there is anything new....

Am I being super dumb, all I see is one download of a rar file containing os.nb0
What's the RUU version you speak of?
(EDIT) Irrelevant post now original has been updated and post below, although I still not sure what you were looking at, at the time itschase.

Flasher for supercid devices is here.
http://uploaded.de/?id=f1zt2f

The second of the two links contained the RUU...unless the upload site gave me the wrong file....
I am about to try an experimental re-flash...I will post results.

what language is this?

itschase said:
The second of the two links contained the RUU...unless the upload site gave me the wrong file....
I am about to try an experimental re-flash...I will post results.
Click to expand...
Click to collapse
Guess I am the retard, because I tried using the os.nb0 file with several different RUU's and none of them could open the file. I changed the extension to .nb and .nbh just for good measure with no luck.

Works...
tupisdin said:
Here is Official(not hand made) Artemis WM6 OS dump!!!
Please do not ask me about anything!
I will not comment anything.
http://uploaded.de/?id=5g88lr - ROM ver 1.38
http://uploaded.de/?id=f1zt2f - flasher for SuperCID devices only
All in you hands!
Enjoy!
Click to expand...
Click to collapse
Hi all just to let you all know tested this rom and all ok on my sim free (expansys) P3300.
I tried the "PDAVIET_Black&Blue_v3_WWE_Full" first-this was ok but phone would not switch on today, so i was thinking og going back to bepe's wm6 and saw this rom.
I used Artemis_USPL first, then the ROMUpdateUtility.exe supplied in the ARTE_WM6_FLASHER download quoted here (flasher for SuperCID devices only).
My details from device are now as below.
Rom version: 1.38.0.0 WWE
Rom date: 02/15/07
Radio version: 02.93.90
Protocol version: 4.1.13.42
There are not ext rom applications loaded with the ARTE_WM6_FLASHER (2nd link), and not alot installed in wm6, but my memory shows 47.89 free storage and 25.61 free program space.
Keep up the good work XDA....

tupisdin said:
Fasten seat belts and prepare to catch WM6 for HTC Artemis
Click to expand...
Click to collapse
Are we going to have wm6 for the prophrt ?

gadjet said:
Hi all just to let you all know tested this rom and all ok on my sim free (expansys) P3300.
I tried the "PDAVIET_Black&Blue_v3_WWE_Full" first-this was ok but phone would not switch on today, so i was thinking og going back to bepe's wm6 and saw this rom.
I used Artemis_USPL first, then the ROMUpdateUtility.exe supplied in the ARTE_WM6_FLASHER download quoted here (flasher for SuperCID devices only).
My details from device are now as below.
Rom version: 1.38.0.0 WWE
Rom date: 02/15/07
Radio version: 02.93.90
Protocol version: 4.1.13.42
There are not ext rom applications loaded with the ARTE_WM6_FLASHER (2nd link), and not alot installed in wm6, but my memory shows 47.89 free storage and 25.61 free program space.
Keep up the good work XDA....
Click to expand...
Click to collapse
When my p3300 starts the below info is displayed.
IPL 3.04.0001
SPL 1.11.0000
GSM 02.93.90
OS 1.38.0.0
I still have the htc start up wallpaper from the "PDAVIET_Black&Blue_v3_WWE_Full" rom , so will reflash original p3300 rom (ART_HTCWWE_11240501_026790_WWE_Ship), then run above again.
Will let you know outcome, fingers crossed...

Core WM6 with no radio update or EXT Rom applications.
gadjet said:
When my p3300 starts the below info is displayed.
IPL 3.04.0001
SPL 1.11.0000
GSM 02.93.90
OS 1.38.0.0
I still have the htc start up wallpaper from the "PDAVIET_Black&Blue_v3_WWE_Full" rom , so will reflash original p3300 rom (ART_HTCWWE_11240501_026790_WWE_Ship), then run above again.
Will let you know outcome, fingers crossed...
Click to expand...
Click to collapse
Wallpaper back to normal now..
Startup screen now shows:
IPL 1.12.0001
SPL 1.11.0000
GSM 02.67.90
OS 1.38.0.0
Still no ext rom loading or any apps, but wm6 ok free memory same (47.89 storage-26.24 program).

anyone able to post screenshots of the various pages, memory info and device info.
Anyone able to comment on how it compares to bepes rom.

Works now re-modified to include basic rom applications
dannyoneill said:
anyone able to post screenshots of the various pages, memory info and device info.
Anyone able to comment on how it compares to bepes rom.
Click to expand...
Click to collapse
After testing this rom I would advise everyone to use the version ARTE_WM6_3_5, the first release v3 looks like a cut down version of wm6.
The reason its fast is that loads of programs etc removed, no quickgps, no bluetooth explorer etc... also new radio stack is old version to?
Re flashing version 3.5 now which includes the missing apps.

gadjet said:
After testing this rom I would advise everyone steer clear of it, its a shame but looks like a cut down version of wm6.
The reason its fast is that loads of programs etc removed, no quickgps, no bluetooth explorer etc... also new radio stack is old version to?
Re flashing bepe rom now
Click to expand...
Click to collapse
This Rom OS only.Applications in this Rom not new but verry nice OS.May be i will Rebuild OS in v3 B&B in next week...!

Fixed 12.20.2007 - Schaps 4.01 - No Ext Rom! [Super Storage]

My Stripped Rom originally Crashed w/ KarhU's Benchmark Test.
I think these Roms were built w/ HyperCore's xx_os.nb which also crashed KarhU's test.
Which in both cases may have been the result of not deleting the OEM_FLASHDRV.DLL
I have since followed matts suggestion:
mattk_r;1750790 said:
Make sure the OEM_FLASHDRV.DLL from the OEMDrivers is removed first. I think it's what made the difference.
Click to expand...
Click to collapse
(As an Extra precaution; I used matts xx_os.nb.)
After that, I ran SPB Benchmark two times on my stripped version, and it ran all the way thru without a crash.
Roms Removed Jan. 02, 2008
I won't be re-posting these Roms.
Instead I will be working with My rebuilt Schaps 4.01 Lite
In which ICS is now Working:
Link - Rom: Schap's WM6 4.01 Lite (With Internet Sharing!)
Once I clean it up, then I might repost a Merged ExtRom Version (SuperStorage)
Schaps 4.01 Roms without the Ext Rom!
Stripped From 4.01 Full:
Adobe Flash Lite
Calculator
Mobile Power Point
Streaming Media
Task Manager
Windows Live Messenger
Windows Update
Spb Benchmark index 364.25
CPU index 1400.59
File system index 156.26
Graphics index 1175.25
Note:
No Splash Screens - So you'll still have the Splash from whatever Rom you flashed last.
Unless you http://wiki.modaco .com/index.php/Custom _Hermes_Splash
I ran Schaps 3.54c w/o Ext Rom for almost 2 months and never had any issues.
It ran just as good as the one with the Ext Rom.
So I did the same for the 4.01's
If you feel the desire to donate, give it to either Schaps, Matt, Bepe, Tadzio or even KarhU, for making sure the cooks only give you the best.
(If I forgot anyone, please forgive me. I just mentioned the ones who I first thought of.
Please Post comments like:
'Downloading Now' or 'You Rock' or 'Can I put this on my Treo?'
Pic is from Lite Rom.

Can I put this on my Treo?

...no.
This is the hermes section

venelar said:
...no.
This is the hermes section
Click to expand...
Click to collapse
Your Point?

another link plz, beside rapidshare

berdinkerdickle said:
Your Point?
Click to expand...
Click to collapse
nevermind.

venelar said:
guy asked about putting this on a treo. read the post under you
Click to expand...
Click to collapse
Oh,
Yea, I think he was just being funny

venelar said:
nevermind.
Click to expand...
Click to collapse
Honest Mistake

Thanks dude, currently running 4.01 with some apps in extended rom, this is perfect. Been running 4.01 for a few weeks now and it is solid.
Had some problems with previous bigstorage roms (freezing) will report back if any problems.
Nice thing is I can just go back to 4.01 standard with a backup file if required.
thanks :-D
Russ

Amauta said:
Can I put this on my Treo?
Click to expand...
Click to collapse
I hope you mean store a copy of it on the storage card for your treo that you later plan to flash to your Hermes

The 'full' download is corrupt, tried to download twice
when extracted with winrar:
! C:\Downloads\Schaps_Full_401-ExtRom.rar: CRC failed in RUU_signed.nbh. The file is corrupt
Can you please reupload or explain what I am doing wrong?!
cheers
Russ

I'm sorry,
I tested the Lite, I should have also tested the Full.
I will try and upload one that works later tonight.

That's a lot of memory free
Any chance you could do the same with Schaps 4.22? I'd have no idea where to start

??? Schaps 4.01 ???
After flash your ROM, in the About in Setings i have:
[size=+1]CE OS 5.2.1620 (Build 18533.0.7.0)[/size]
In the Schaps thread (ROM 4.01)
schaps said:
Release notes:
Changed operator name display rules
[...]
Startup animation moved to Extended ROM (saves 800KB of storage)
Main features:
WM6 version 5.2.1933 build 18533.0.7.0 [NEW]
[...]
All bugs from the previous versions should be fixed!
OEM applications:
Camera app 4.0.28276
[...]
VoIP Settings 0.9
Click to expand...
Click to collapse
Why your ROM presents a different OS and a Build ??

RanDomIze said:
...clip...
Why your ROM presents a different OS and a Build ??
Click to expand...
Click to collapse
It might be the xx_os.nb I used.
Don't know if that's a bad thing, good thing, or otherwise.
Either way the Rom works great for me.

Can you explain how you did?
Tried to do to 4.22 but I have errors

Sorry Guys
I am having ridicules internet trouble.
I am going to give up on trying to upload a fixed Full.
Here is all I did to get rid of the Extended_Rom
Get the Ruu_signed.nbh
NbhExtract to NbDump (Tadzio’s Tools)
Replaced Schaps xx_os.nb with Bepe’s (rename if needed)
And then NbBuild.
Used Dutty’s ‘Nb to Nbh.’
And then Flashed.
That’s the simple way, and it worked for me first time.
I actually did a lot more after that to fix shortcuts that pointed to ExtRom, and moved contents of ExtRom to xx_os.nb.dump.
And if you really want to clean it up, you can edit the Registry to reflect changes.

no worries, I stick with 4.01 standard for now.

Added to 1st Post My Stripped Version of 4.01 Full
(Internet Sharing Works)

What did you strip and what did you leave from the full? I don't use all the apps in it but like having some available 'just in case'. Sorry - just after spending so much time flashing and reinstalling recently I don't want to reflash just to see what is there. If you don't have time to let us know don't worry about it. cheers Russ

HX4700 WM6.1 ROMs

Dpdurst is graciously hosting all ROMS for the 4700. The link is: http://wm6.winmobile.us/hpmain.htm
This is finest and most complete collection of 4700 ROMs. For those interested in my SL61V3_lite ROM, the link is:
http://rapidshare.com/files/102132189/SL61V3_lite.zip
My best wishes to all who continue development for the 4700.
Regards,
Sanjay

Thanks for the effort
I tried the untouched pdaviet version but had a couple issues with it, but will try your modified version.

Keyboard is back to looking presentable!!! Thanks algasystems. Hey sanjay I still have the Windows Mobile Lawn boot screen though... It looks the same as the pdaviet rom I think... I'm not gonna reflash back to check but i'm pretty sure.
I guess it's a good thing you started this thread... the vulcan was probably going to loose it any day now.
I'm using the 4700 rom editor for mods, what are you using.
Thanks for saving me the work of cleaning up the rom!!!
Later..

Chemong: I wish you good luck, but don't believe you will find my variation fixes any issues such as battery problems. This is just a cleaner version of the same rom.
MannyMania: Interesting that you are still seeing the lawn. Here's the boot screen I now see. Oh well, at least the keyboard is fixed. I don't intend to do anymore to this since it now is good enough until Kozhura returns but hopefully others will take this and improve it.
I've used Vivi's kitchen in the past, but for simple changes such as these, I just use mamaich's tools directly. I credited Chamine in earlier posts for the boot splash change tips.
Hope this works for you.
Regards.

Just flashed to HX4700 PDAVIET wm6.1 and the keyboard looks familiar to me, thanx.
Ciao

Just a note:
The first time I tried the PDAViet version, I saw the rather undesireable bootsplash. I tried re-flashing the previous WM6.0, which did not un-do the bootsplash.
I found that the only way to get the original blue and white HP bootsplash is to re-flash your device with the official WM5 upgrade. If you don't have the WM5 upgrade, I bet any of the WM2003 ROM update patches will yield the same results (just visit HP's website and search for your device to visit the downloads).
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=420535&taskId=135&prodTypeId=215348&prodSeriesId=420534&submit.y=0&submit.x=0&lang=en&cc=us
(This only applies if you want to revert back to WM6.0.)

Nice job, Sanjay! I ony had PDAVIet's version installed for a few minutes before I promptly removed it. You have solved every issue I had with their version.

what did i do wrong?
First of all, greetings and thanks to everyone who made WM6 possible on hx4700!
I noticed that my device shows only 54.33 program memory? On your screenshot it shows 100 and something. How to enable this?
Thanks!

sleeps said:
First of all, greetings and thanks to everyone who made WM6 possible on hx4700!
I noticed that my device shows only 54.33 program memory? On your screenshot it shows 100 and something. How to enable this?
Thanks!
Click to expand...
Click to collapse
If you didn't add your ram to 128mb, that's normal

SleepyPrince said:
If you didn't add your ram to 128mb, that's normal
Click to expand...
Click to collapse
You mean physically welded another memory chip?

sleeps said:
You mean physically welded another memory chip?
Click to expand...
Click to collapse
Well possibly, but I would not recommend doing it yourself!!
http://www.pocketpctechs.com

MaffooClock said:
Just a note:
The first time I tried the PDAViet version, I saw the rather undesireable bootsplash. I tried re-flashing the previous WM6.0, which did not un-do the bootsplash.
I found that the only way to get the original blue and white HP bootsplash is to re-flash your device with the official WM5 upgrade. If you don't have the WM5 upgrade, I bet any of the WM2003 ROM update patches will yield the same results (just visit HP's website and search for your device to visit the downloads).
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=420535&taskId=135&prodTypeId=215348&prodSeriesId=420534&submit.y=0&submit.x=0&lang=en&cc=us
(This only applies if you want to revert back to WM6.0.)
Click to expand...
Click to collapse
MaffooClock:
Interesting. If people are seeing the PDAVIET splash and I'm not, your explanation may be why. When I reflashed my 4700 with the latest ROM, my previous flash may not have been undone. So thank you for the experiments.
Because of the capabilities of the 4700 (e.g. no phone), I believe this ROM can be made even leaner. I will try to repeat your steps and fix the flash the next time.
Do you think reflashing with a Kozhura WM6 ROM would accomplish the same thing? Even the thought of reverting back to the HP WM5 disaster causes me to shudder.
Regards.

sanjay1951 said:
Well possibly, but I would not recommend doing it yourself!!
http://www.pocketpctechs.com
Click to expand...
Click to collapse
uhhh, so everything os OK with mine
Thanks!

I did the upgrade from PPC techs and my 4700 works fine, been over a year since they did it and no effects at all.
Also posted the new Sanjay 6.1 build to my website for those that don't want to use rapidshare.
http://wm6.flyingarizona.net

sanjay1951,
Great work.
Does this ROM has all rgu files or you deleted them all ?
vivi
Edit : I dumped it , no rgu files.
vivi

vivi said:
sanjay1951,
Great work.
Does this ROM has all rgu files or you deleted them all ?
vivi
Edit : I dumped it , no rgu files.
vivi
Click to expand...
Click to collapse
Thank you Vivi. I've found your kitchen to be excellent as well and a great help for ROM tuning. I also read your tips including ones to remove the RGU files, but PDAVIET already had these deleted so I did not need to remove them. I still feel though that for the 4700 capabilities, there are other files that can be removed to free up more space. I will experiment more to see what I can do with this.
Regards,
Sanjay

dpdurst said:
I did the upgrade from PPC techs and my 4700 works fine, been over a year since they did it and no effects at all.
Also posted the new Sanjay 6.1 build to my website for those that don't want to use rapidshare.
http://wm6.flyingarizona.net
Click to expand...
Click to collapse
Thank you dpdurst for posting the rom to your site. I don't have a site so I appreciate you doing this. It's the contribution of many and sharing that makes this better for all of us.
Regards.
Oh...and Happy Anniversary!

sanjay1951 said:
Thank you Vivi. I've found your kitchen to be excellent as well and a great help for ROM tuning. I also read your tips including ones to remove the RGU files, but PDAVIET already had these deleted so I did not need to remove them. I still feel though that for the 4700 capabilities, there are other files that can be removed to free up more space. I will experiment more to see what I can do with this.
Regards,
Sanjay
Click to expand...
Click to collapse
Thanks Sanjay,
rgu files are needed in using ROM Kitchen.
If no rgu files in ROM, no way to re-packages from that ROM and use ROM Kitchen.
I want to try this ROM but I also want to add my favorite programs in this ROM also.If no rgu files,then I have to manually add and edit it.
I am working with WM6.1 ROM for ASUS P525 and fixing WiFi error with no success , so no time to build Hx4700 WM6.1 from scratch.
BTW,thanks.
vivi

Someone should post the ATI drivers from the hx4700 on here.
--James

sleeps said:
You mean physically welded another memory chip?
Click to expand...
Click to collapse
Yes, actually is replace the 64MB memory

FIX for lost settings (passwords, BT pairing,etc.)?

I've installed MARY 3.7.1 and some other cabs. After a soft reset it was normal that BT pairing, passwords and the GPRS settings were gone or didn't work.
By accident I tried an old CAB from mun_rus calls BT_DUN.cab, I don't install this one normally when I reflashed my device.
I thought the solution was in MARY 3.7.1, but after uninstalling BT_DUN.cab I've found out that the settings were lost again.
The CAB is here: http://forum.xda-developers.com/attachment.php?attachmentid=39883&d=1180164571
Can someone check this with a ROM with the new XIP like MARY, PDAVIET, schaps, etc.?

Stingray66 said:
By accident I tried an old CAB from mun_rus calls BT_DUN.cab, I don't install this one normally when I reflashed my device.
Click to expand...
Click to collapse
Hmm, at first glance you actually seem to be right which is good news for many among us
I had never installed that CAB before, and I learned to live with lost passwords etc. (never got around to trying the workaround), but that's all about to change with this easy fix​Some more tests have revealed that in my case the "first glance" must have been sheer luck
I mainly checked whether wifi passwords were required again, and tried uninstalling/re-installing/rebooting/resetting/... but all I can conclude is that only sometimes the settings are preserved and still most of the times the settings are lost - this regardless of the aforementioned CAB.
Well, I haven’t lost hope yet, though. Maybe someone will figure it out, but the sooner the better

MANY THANKS,
It's seems works fine...
Many thanks again...

Stingray66 said:
I've installed MARY 3.7.1 and some other cabs. After a soft reset it was normal that BT pairing, passwords and the GPRS settings were gone or didn't work.
By accident I tried an old CAB from mun_rus calls BT_DUN.cab, I don't install this one normally when I reflashed my device.
I thought the solution was in MARY 3.7.1, but after uninstalling BT_DUN.cab I've found out that the settings were lost again.
The CAB is here: http://forum.xda-developers.com/attachment.php?attachmentid=39883&d=1180164571
Can someone check this with a ROM with the new XIP like MARY, PDAVIET, schaps, etc.?
Click to expand...
Click to collapse
This would be VERY cool if it works! I hope that's all there is to it.
Thanks again Stingray66! PS: Do you drive a Corvette?

StefanoRuleZZ said:
MANY THANKS,
It's seems works fine...
Many thanks again...
Click to expand...
Click to collapse
Work here again too on the ROM FInixNOver 3.1

SuperSport said:
Thanks again Stingray66! PS: Do you drive a Corvette?
Click to expand...
Click to collapse
I did a couple of times, but I'm not in the position right now to buy one. Priority is my wife, kids and moving to another house right now, but a Corvette from 1966 is a great car ..... beautiful!

I already fixed this problem in my latest ROM (version 1.2).
I created a modified XIP and changed some buetooth drivers to verify A2DP still works.
I will create a personal ROM to verify if this solutions works too!
Would be great if this is another solution to fix the problem.

Ok, I found something!
I opened the rom the ausdim WM6.1 and Mary rom 3.7 and took the files of the *. hv ausdim and copy for the 3.7 rom Mary!
The two rom´s are the same version and don't have any trouble copy, and I noticed that once the 3.7 rom Mary no longer loses the passwords or the codes of wifi!
I think the problem is in the register!
HKEY_CLASSES_ROOT
HKEY_CURRENT_USER
HKEY_LOCAL_MACHINE
But where???
Translated by Google, sorry!

sergitec said:
Ok, I found something!
I opened the rom the ausdim WM6.1 and Mary rom 3.7 and took the files of the *. hv ausdim and copy for the 3.7 rom Mary!
The two rom´s are the same version and don't have any trouble copy, and I noticed that once the 3.7 rom Mary no longer loses the passwords or the codes of wifi!
I think the problem is in the register!
HKEY_CLASSES_ROOT
HKEY_CURRENT_USER
HKEY_LOCAL_MACHINE
But where???
Translated by Google, sorry!
Click to expand...
Click to collapse
The problem is in the XIP section, it is in the nk.exe (kernel).
Ausdim uses an older XIP version which does not lose settings.
The only problem was the broken A2DP. I managed to fix this problem and Ausdim will include my solution to fix A2DP in his ROMs.
Upcoming ROMs from me and Ausdim will no longer lose settings.
I hope other ROM-cookers decide to use the older kernel too.

adewidt said:
The problem is in the XIP section, it is in the nk.exe (kernel).
Ausdim uses an older XIP version which does not lose settings.
The only problem was the broken A2DP. I managed to fix this problem and Ausdim will include my solution to fix A2DP in his ROMs.
Upcoming ROMs from me and Ausdim will no longer lose settings.
I hope other ROM-cookers decide to use the older kernel too.
Click to expand...
Click to collapse
well actually the old xip didnt lose the settings, yet it cause unstable de system, problem include cant find the contacts, lose response when launch the programs from SD card after wake up. I've been suffering for a long time about it which doesnt happens with the new xip and i dont know why, with the same cooking only expect the new and old xip

themaskfly said:
well actually the old xip didnt lose the settings, yet it cause unstable de system, problem include cant find the contacts, lose response when launch the programs from SD card after wake up. I've been suffering for a long time about it which doesnt happens with the new xip and i dont know why, with the same cooking only expect the new and old xip
Click to expand...
Click to collapse
I did not experience any of the problems you describe.

adewidt said:
The problem is in the XIP section, it is in the nk.exe (kernel).
Ausdim uses an older XIP version which does not lose settings.
The only problem was the broken A2DP. I managed to fix this problem and Ausdim will include my solution to fix A2DP in his ROMs.
Upcoming ROMs from me and Ausdim will no longer lose settings.
I hope other ROM-cookers decide to use the older kernel too.
Click to expand...
Click to collapse
So if it is the XIP that matters we cant have a fix right ? Roms using the new XIP are doomed to have crappy A2DP

firiel said:
So if it is the XIP that matters we cant have a fix right ? Roms using the new XIP are doomed to have crappy A2DP
Click to expand...
Click to collapse
As I already said, I managed to fix A2DP using the old bootkernel (nk.exe part of XIP).
This works for wm6.1 and wm6.0.
There is no reason good reason to use the new kernel in stead of the old kernel.

As i say 4 months before here:
http://forum.xda-developers.com/showthread.php?t=342269
the old xip section (nk.exe) is working better with trinity 400mhz.
All my rom in this 4 months is builded with old nk.exe and i tell to cookers to use them to.
I dont see any reason to use the new (dopod) nk.exe with that very iportant bug.
No problems and nothing, nk.exe is the kernel from the device no nead to update that in the future.
The only problem it was in a2dp sound but after the fix from adewidt (Thanks again) the sound it is perfect!
Thank's

adewidt said:
I already fixed this problem in my latest ROM (version 1.2).
I created a modified XIP and changed some buetooth drivers to verify A2DP still works.
I will create a personal ROM to verify if this solutions works too!
Would be great if this is another solution to fix the problem.
Click to expand...
Click to collapse
Well after some resets, it does loose it's settings.
@adewidt
I'll try your 1.2 too, but I think the DEVICE ID of TomTom will change again (like it did whenm we switched from WM5 (official) to WM6 (DOPOD))

Stingray66 said:
Well after some resets, it does loose it's settings.
@adewidt
I'll try your 1.2 too, but I think the DEVICE ID of TomTom will change again (like it did whenm we switched from WM5 (official) to WM6 (DOPOD))
Click to expand...
Click to collapse
Yes it change your device ID.