I've found this post with some interesting cabs.
Tested Htc Album and keyboard adn work well in my Artemis.
Bye
http://forum.xda-developers.com/showthread.php?t=340932
Cheers - been after the album
Thanks, will install all in next Vanilla.
hutchy007 said:
Cheers - been after the album
Click to expand...
Click to collapse
Hopefully Album will be in Meschle's next ROM. I tried to install it and it hosed up my system really bad(slow sys). Had to hard reset and restore.
shawndh said:
Hopefully Album will be in Meschle's next ROM. I tried to install it and it hosed up my system really bad(slow sys). Had to hard reset and restore.
Click to expand...
Click to collapse
Ive managed to install mine without too much problem. Then again i'll leave it a few days to see how it settles down
calc doesnt work after install and soft reset??
album works fine
Related
Ok, I have upgraded my Hermes to WM6 using the ROM on the wiki site.
I have installed all my apps and everything was looking great. I then noticed the Extended ROM and half a dozen cab files. So I have installed all of these as assumed they were some sort of patches.
I carried on installing my apps but now after a reboot the SIM PIN Lock entry screen looks a really basic (non 3d) button version and the keypad that should be shown when pressing the green call button isn't displayed I just get a white screen.
I have installed the following apps:-
eWallet 5
Tomtom 6
PocketBreeze 5.2
Phone Alarm + VistaMedia skin
Any ideas on what has happened?
Do I need to re-flash my phone?
Help..
Thanks
Mark
mdavenport said:
Ok, I have upgraded my Hermes to WM6 using the ROM on the wiki site.
I have installed all my apps and everything was looking great. I then noticed the Extended ROM and half a dozen cab files. So I have installed all of these as assumed they were some sort of patches.
I carried on installing my apps but now after a reboot the SIM PIN Lock entry screen looks a really basic (non 3d) button version and the keypad that should be shown when pressing the green call button isn't displayed I just get a white screen.
I have installed the following apps:-
eWallet 5
Tomtom 6
PocketBreeze 5.2
Phone Alarm + VistaMedia skin
Any ideas on what has happened?
Do I need to re-flash my phone?
Help..
Thanks
Mark
Click to expand...
Click to collapse
Which version have you upgraded to?? If it is v0.20.x (thats 0.20.0 or 0.20.1) this is a known issue, seriously recommend reading the thread concerned with the ROM you are flashing before going ahead (the link for the thread is in the table aswell).
mrvanx said:
Which version have you upgraded to?? If it is v0.20.x (thats 0.20.0 or 0.20.1) this is a known issue, seriously recommend reading the thread concerned with the ROM you are flashing before going ahead (the link for the thread is in the table aswell).
Click to expand...
Click to collapse
Hi,
My ROM Version is 3.22.110.1
I installed it from the 1st option in this list:-
http://wiki.xda-developers.com/index.php?pagename=Hermes_Cooked_ROMs
I installed from Mirror 5
I am little confused, is there a way to overcome this issue. Im bit of a newbie so do appreciate your help..
Mark
mdavenport said:
Hi,
My ROM Version is 3.22.110.1
I installed it from the 1st option in this list:-
http://wiki.xda-developers.com/index.php?pagename=Hermes_Cooked_ROMs
I installed from Mirror 5
I am little confused, is there a way to overcome this issue. Im bit of a newbie so do appreciate your help..
Mark
Click to expand...
Click to collapse
So you installed the 'Vanilla' version?? (look at the names on the left side)
mrvanx said:
So you installed the 'Vanilla' version?? (look at the names on the left side)
Click to expand...
Click to collapse
Yes it was the Vanilla version. I have done the wrong one?
Can you point me in the direction of the fix if there is one?
Thanks again
Mark
mdavenport said:
Yes it was the Vanilla version. I have done the wrong one?
Can you point me in the direction of the fix if there is one?
Thanks again
Mark
Click to expand...
Click to collapse
The best thing to do is to is to perform a 'Hard Reset' which will reset your device back to the same point as when the rom was flashed, so you will need to reinstall everything. Suggest you install the same things again but dont install the skin....this might be incompatible with WM6 (since nearly all skins are designed for use in WM5).
BTW, i would take some time to read through the wiki and familiarise yourself with the various reset types and other literature on ROM upgrades, the knowledge in these pages will hold you in good stead for the future sir
mrvanx said:
The best thing to do is to is to perform a 'Hard Reset' which will reset your device back to the same point as when the rom was flashed, so you will need to reinstall everything. Suggest you install the same things again but dont install the skin....this might be incompatible with WM6 (since nearly all skins are designed for use in WM5).
BTW, i would take some time to read through the wiki and familiarise yourself with the various reset types and other literature on ROM upgrades, the knowledge in these pages will hold you in good stead for the future sir
Click to expand...
Click to collapse
Ok, thanks for your help.
Just one other question. Should I have ran all the CAB's from the Extended ROM?
mdavenport said:
Ok, thanks for your help.
Just one other question. Should I have ran all the CAB's from the Extended ROM?
Click to expand...
Click to collapse
Not really....the best thing you can do is to leave the ext_rom alone and just manually configure your MMS and WAP settings by hand. The ext_rom (again) contains cab installers that are designed for WM5.....while most should work in WM6 there are some that dont. ext_rom is something i havent used for ages in XDA-Live (v0.1 and now 0.2) and I dont miss it.
Just install the apps you were running (phonealarm and others). The ext_rom doesnt do much except run carrier based stuff (like themes and automatic settings).
problem with new builds???
activesync still there???
don't warry.....
install this cab, softreset the ppc, and no more the actsync icon on taskmanager!!!!!
bye!
updated the cab, something was wrong while compile it....
try new..
so activesync will still conttinue to work after installing this? but it just will not show up in task manager. Do i understand that right.
ervius said:
updated the cab, something was wrong while compile it....
try new..
Click to expand...
Click to collapse
Is it similar to eliasweb's AsyncKiller?
thanks for the cab
this problem has put me off some roms in the past
thank you
I'm confused as to why you would want to 'kill' Activesync? If ActiveSync is closed/disabled, doesnt that stop push-email too?
electricdemon said:
I'm confused as to why you would want to 'kill' Activesync? If ActiveSync is closed/disabled, doesnt that stop push-email too?
Click to expand...
Click to collapse
Yes, but some people don't use push-email.
Thank you ervius, I have the same question, what's the difference with eLiAs ASyncKiller.
panosha said:
Yes, but some people don't use push-email.
Thank you ervius, I have the same question, what's the difference with eLiAs ASyncKiller.
Click to expand...
Click to collapse
elias activesync killer close actsync (when it can), my tools only check at startup that activesync isn't alive forever.... by registry keys check...
Installed this morning. After several soft resets and normal usage, can't really see any difference, Activesync still running in background and showing in Task Manager.
tnyynt said:
Installed this morning. After several soft resets and normal usage, can't really see any difference, Activesync still running in background and showing in Task Manager.
Click to expand...
Click to collapse
on my device it works well, maybe only after a softreste can appen in random that appear actsync on taskmanager once, but killing tapping on "X", newer appear, from tonight, today, At wake up, I checked and no icon into taskmanager was.....
works a treat mate thanx
no joy for me
tried in on A.Z.T.O.R. V7 and still keeps popping back on...
ill be flashing back to duttys new rom so i should have this problem any more
just thought i would let you know.
Same for me with udK's ROM. No joy!
Thanks anyway ervius.
When a second version?
Hi Ervius,
As I told you in another post, your tool work fine in 1.93, 1.97 but fails in 2.xx ROMs (that's my experience). Maybe in newer ROMs this service is activated each few minutes. Well, in any case, either Alias or yours fail in this kind of ROMs. What modifications in registry are done?. Thanks a lot in advance.
Regards,
If I do hard reset, then after the first boot I immediately do soft reset before the diamond installing tf3d, will I get a rom without tf3d installed?
I'd like to try out different shell programs.
Thank you in advance
Noti Lad
No that is not possible, but why dont you go to settings->today > and deactivate TFLO3D?? Or you can cook a rom without tfl3d
There are also many precooked roms available without tf3d like Morna's or Hikari.
i think it does
i did the same thing and i get a clean rom without tf3d
chasist said:
i think it does
i did the same thing and i get a clean rom without tf3d
Click to expand...
Click to collapse
very interesting? tell me more about that? so the tflo just disappeared completely, dont think so. If TFLO is precent in the rom you cant get it out, the only way is to cook the rom or take a cooked clean rom without Tflo. So like i told before you can only disable it
Thanks for the replies. I will try it tomorrow to find out. I hope it won't brick the diamond.
I know there are some cooked clean ROMs. But I think it's handy to have TF3d in the rom just in case I want it back, then I just need to do Hard-reset instead of reflashing.
Pls tell us!
And when to press softreset?
I would like to have a clean 2.03 but i dont use any tflo.
notilad said:
Thanks for the replies. I will try it tomorrow to find out. I hope it won't brick the diamond.
I know there are some cooked clean ROMs. But I think it's handy to have TF3d in the rom just in case I want it back, then I just need to do Hard-reset instead of reflashing.
Click to expand...
Click to collapse
actualy tf3d is still on the device and you wan't need a hard reset to get it back just locate PT_Manila_REG.cab in windows folder and run it and you have tf3d running.. the softreset before customazation will also prevent opera from instaling
hey gullum nice to see u here
i used ur rom when for my ex-prophet
yeah,basically the tf3d is still in your phone but not visible/cant be activated in today plugin (but u can delete leftover manila files using resco/total commander just if u want more free space)
this also prevent opera from installing,but lots of new version in this forum u can get
still,u can find those cab files in windows or by using 3rd party software like memmaid
i did soft reset before the customisation takes place
Hello I have alot of programs installed on my device and therefore the Blackstone volume control has become buggy. I was hoping someone can upload a cab for the rhodium volume control. I'm sure they made some changes that are different from the blackstone, and I have confidence that this will work.
try this
try this and see does it work .. haven't tested on y X1 since i am using the blackstone one ...
cruzzmz said:
try this and see does it work .. haven't tested on y X1 since i am using the blackstone one ...
Click to expand...
Click to collapse
Hmm.... this time it doesn't work at all... I think it's software issue though.
poetryrocksalot said:
Hmm.... this time it doesn't work at all... I think it's software issue though.
Click to expand...
Click to collapse
not sure bout that though ... i can try to put the topaz one here also if u want ... also dont know if it will work or not though
Please do.
here u go to test ...
It doesn't work.
only the blackstone one can work ??? ehmmm
Yeah, if you are curious the software the conflicts with the volume cabs is AIM Productions: Hourly Chime.
cab worked for me - thanks!
The first cab that was posted - installed it
comeradealexi said:
cab worked for me - thanks!
Click to expand...
Click to collapse
Worked? As in the Rhodium or the Topaz one?
Topaz doesn't work even after resigning with SDK certs.
Rhodium works.
BlackStone works.
install http://www.megaupload.com/?d=JQTOPSM2
install sdkcerts (in not installed)
reboot phone
Ethermind said:
Topaz doesn't work even after resigning with SDK certs.
Rhodium works.
BlackStone works.
install http://www.megaupload.com/?d=JQTOPSM2
install sdkcerts (in not installed)
reboot phone
Click to expand...
Click to collapse
Hmmm...I think that's why the Rhodium Cab doesn't work...I only use SDKcerts for wvga fix, and I don't have wvga fix on my phone.
Edit: Nope, that doesn't work either...
i uploaded from blackstone - identical to topaz and rhodium
Ethermind said:
i uploaded from blackstone - identical to topaz and rhodium
Click to expand...
Click to collapse
It's not identical, if it was identical then Rhodium and Topaz should install exactly the same way BlackStone installs on my phone.
http://www.htc.com/uk/SupportViewNews.aspx?dl_id=717&news_id=300
Enjoy
iridium21 said:
http://www.htc.com/uk/SupportViewNews.aspx?dl_id=717&news_id=300
Enjoy
Click to expand...
Click to collapse
Ooo, very cool - I wonder if my Orange branded device will work with that or if I'll have to go down the unlock route to use a cooked ROM instead?
Does anyone know if this gives us TF3D 2.5?
Great - thanks for posting. Im running my backups now.
Question - would a full spb backup restore from 6.1 restore to 6.5? I've never done this before!
Double post - deleted.
Paulplex said:
Does anyone know if this gives us TF3D 2.5?
Click to expand...
Click to collapse
Yeah, I'm really curious about this as well.
Its TF3D 2.1 (with weather on the homepage)
I used PIM Backup which seemed to handle contacts/sms/calender stuff ok.
Phone decided to hang for a bit once it'd completed the restore but a swift reboot sorted that out.
Now the fun job of re-applying apps/config etc!
Pretty painless flash and seems to work ok - slightly more sluggish than WM 6.1 but hopefully re-applying config tweaks will sort that out.