autoanswer SMS - P3300, MDA Compact III General

Does anyone know if there exsists a program for WM5 that autoreponds to SMS'es.
The goal is to have someone send a codeword and depending on the codeword he gets one or another answer. I did find SMSOrganiser but that only replies to numbers in the phonebook, not to all numbers.
J.

Related

How to modify the registry in order to send more than 160 characters in SMS

Does anyone know what to add or remove or change in the registry to allow more than 160 characters on sending SMS ?
Thanks
this is a standard sms thing... you cant change how many characters to send in one message.. now you can type over 160 and your phone should display like 168/2 where the first number is characters and the 2nd number is how many sms' its going to send... and when it sends most newer phones will combine the 2 messages on the recieving device and it will display as 1
My O2 Xda Stealth shows as you described, however, it also gives me an error "Your Text Message cannot be sent". It works perfectly within 160 characteres (1/160) but as soon as you start with (2/320) shows the error when you hit SEND.
Any ideas ? Could you provide the Registry ?
Thanks
Maybe some restriction from your provider, I have O2 XDA Stealth too and I am sending longer messages without any problems...
Ok, thanks, let me go back an ask my Network provider to see if I have restriction.
shogunmark said:
this is a standard sms thing... you cant change how many characters to send in one message.. now you can type over 160 and your phone should display like 168/2 where the first number is characters and the 2nd number is how many sms' its going to send... and when it sends most newer phones will combine the 2 messages on the recieving device and it will display as 1
Click to expand...
Click to collapse
This issue was a nightmare for me until I realized how to overcome with continuous efforts. In my case I use the arabizer and thus, I can send 160 char. in one shot (english) but when I change to arabic, the number of char. turns to 1/70 (i.e. max of 70 char. per shot).
Now, that wasn't the case always, I upgraded to one of the latest arabizer versions and surprisingly, everytime I wanted to send english sms it only allowed 70 char! I had no time to dig and find out why is this happening, though I crossed check between older cab files and new ones and found that among the difference was that the new one had two fonts files those are "tahoma" and when installed, voila the problem was solved.
The moral is it is not a standard SMS thing, it is something with localization characters. May be
This is not the case. The question if you can send full 160 characters or only 70 characters depends on the fact wheather you use ASCII or UNICODE. In case of use Arabizer or some special national characters (same for us here in CZ), you can send only 70 characters per one message, but then you can continue and you can see i.e. 75/2 and the longer message will be sent by 2 parts. But he cannot send more than one message at all...
In my case was the Network. For some reason there was a limitation on sending SMS. Network customer service did not resolve my case, I surfed in Internet and found some tricks for GSM networks.
Bottom line I just write down the following ##004#[SEND] and then I received a message from the network "Success" or something like this (don't recall). But it was enough to be able to send more than 160 characters (obviously the system splitted it in "n" numbers of SMS when you submit it)
Hope it could also work with other peoples

SMS problem: Can't send sms larger than 160 chars.

Hi all
I have come across the problem that I can't send SMS larger than 160 chars after I upgraded to the "official" WM6. I am using the Swedish version on a HTC TyTN. When I try and send a message that is larger than the 160 chars i get a message saying (loosely translated from Swedish) Can't send SMS. After I click ok I also get notification on the bottom left part of the sms window saying synchronization error.
Has anyone else got the same problem and if so have anyone found a solution.
/Nicklas
Just to clarify...
I take it to mean that you could sent sms that were over 160 characters before you upgraded?
Because most of the providers that I know don't allow that.
Found something on the forums about this:
http://forum.xda-developers.com/showthread.php?t=293505
Hope it helps.
Yes I could since the SMS program automatically sends the large SMS in smaller parts.
Say I make an SMS with 203 chars then it would send it as 2 sms, one with the first 160 chars and then a second sms with 43 chars and when the SMS arrive to the recieving phone it will be put together if that phone is capable of that. Now days I think all phones can do this. Or at least should be able to do this but after the upgrade to WM6 this fails on my TyTN.
i guess the previous version of the SMS application was allowing what is called multiparts message, meaning it send as many SMS of 160 car regarding your text lengh but with no guarantee that the reviever will have them in the proper order
usually SMS is limited to 160 car
larsuck: Thanx for the link but nothing in that helped.
So if anyone else have any idea I would much appreciate it because it is a bit frustrating that it worked with wm5 and not with wm6 so far
Have you tried to take a look at DiStefano's Cab Collection? There is an Palm SMS application. You can try it with this application if it is possible on you're device. Its a small test!
Good luck
Well I found out how to fix it.
I did this:
Once upgraded settings need to be changed to ensure desired operation, on the device go to start>settings>connections(tab)>USB to PC, untick the box (Enable advanced network functionality) then exit back to the today screen.
Click to expand...
Click to collapse
??? Why would this have an effect on SMS limitations?
I don't know exactly why but what I did was that I hard reseted the unit and after that multipart sms worked as it should. Then I connected the usb cable and ActivSync wanted to reconfigure the settings so I went through the wizard. One of the questions I get is if I want to let internet calls and mms to be sent when the unit is connected and I choose that. Then I let the unit sync with my PC.
After that I couldn't send multipart sms again until I unticked the Enable advanced network functionality box
If anyone knows why this is please enlighten me

forwarding text messages

i own a HTC 8525 and I was wondering if there are any programs out there.. or any settings that allow you to forward you text messages to another number?
In text message menu> reply> forward
In inbox menu> reply> forward or hold on txt and forward.
Not sure about specific programmes though.
but how do i reply with the sms message being copied? u know, just like in emails where they keep previous txts when replying. Is it able to be done instead of copy & paste...
gerald20000 said:
but how do i reply with the sms message being copied? u know, just like in emails where they keep previous txts when replying. Is it able to be done instead of copy & paste...
Click to expand...
Click to collapse
That would probably not be a great idea, since SMSes are charged per block, starting with a block of 160 characters. You would be charged for two SMSes when you exceed 160 characters and are below, if I recall correctly, 306 characters. And so on and so forth.
But in terms of answering your question, I think the best way is just copypasta...
Need same thing - not much help so far - SMS Fwd
I just did a search for the same question. I have a friend that is recieving a text message from a forex trader that he wants to be automatically forwarded to me. Perhaps we can have text message sent to a number that would automatically forward it out to both of us? Surely there is a way or a product that does this? THANKS FOR YOUR HELP

Artemis Toch Features changes needed

Hi,
I don't like the treaded sms and also the fact that If I have a message from an unknown number, the same number is listed as a part of the Pocket CM contact list. Is there a workaround to this problems.
I don't want threaded messages and listing of messages phone number in my contact list.
Help
For disabling sms Threading see here:
http://forum.xda-developers.com/showthread.php?t=372263
The second part i don't understand sorry.
Cheers
...or settings in Advance Tool Settings
Let me explain the second problem.
I received a message (maybe promotional message) from an unknown sender (someone who is not part of my contact list). Once I have received this message and its part of my message inbox. Now this number from where I have received the message is listed in my contact list with a number of messages received in the contact list. This is one feature that i don't want.
Here something
Thing ab this *.cabs
Thanks to Meshle! Be strong Brother!
Thanks a lot - That will be really helpfull.
I've installed the lite version (without cube) and just wondering if I can change the keyboard when texting, I find the individual keys a bit too small, wonder if a different style keyboard is out there?. Also when writing out the 1st line of the text and upon reaching the end of the screen it does not scroll to the 2nd line but continues across with loss of text already typed to the left...any ideas how it can be resolved?
Thanks

Dialling numbers from text messages

Hi, using a TP2 with stock ROM and I have a problem with numbers in text messages.
It seems that if someone SMSs me a phone number, I tap on it and nothing happens. The numbers seem valid and don't contain non-numeric characters but I can't seem to get this to work.
It's really inconvenient because I have to remember the number (or write it down) and dial manually.
Anyone else come across this please?
Ta,
Pete
That is strange, I can just click and dial form a sms
I am also having the same problem with mine. I've tried searching and I can't seem to find a solution either.
Any help would be very much appreciated as this has dogged me since the start.
Thanks!

Categories

Resources