pls help me if there is any software or any good link
i have already tried with regedit mothod but as i change the values it shows UNABLE TO PERFORM OPERATION
ANY WAY TO UNLOCK IT
hello everytime i try and download to my windows 6 mobile it says unsucsessfull any ideas what it can be thanks
Unlock your phone yet? Here is sda app unlock link
http://www.mediafire.com/download.php?fnrb0gyugxy
If you have antivirus enabled that will also stop you from successfully installing apps.
hello...
i have 1 Softbank X02HT from Japan which came out lock to provider from softbank.. i want to unlock this phone, so i bought unlocking codes from a friend but when the codes arrived and i want to enter it but i cant figure out how to key in those codes,, ive searched a lot of forums how to enter those codes but it seems like my phone is "Counter Blocked" some says i had to flash other roms to be able to enter those codes until i read this http://forum.xda-developers.com/showthread.php?t=398945 now the problem is i cant Application Unlock my phone when i use SDA Application and i gives me error like "Phone is not unlockable"
my phones info :
CAVA100
IPL-0.04
CAVA100
SPL-1.00.0000
please help me to get through with it...
thanks...
LiquidSky said:
hello...
i have 1 Softbank X02HT from Japan which came out lock to provider from softbank.. i want to unlock this phone, so i bought unlocking codes from a friend but when the codes arrived and i want to enter it but i cant figure out how to key in those codes,, ive searched a lot of forums how to enter those codes but it seems like my phone is "Counter Blocked" some says i had to flash other roms to be able to enter those codes until i read this http://forum.xda-developers.com/showthread.php?t=398945 now the problem is i cant Application Unlock my phone when i use SDA Application and i gives me error like "Phone is not unlockable"
my phones info :
CAVA100
IPL-0.04
CAVA100
SPL-1.00.0000
please help me to get through with it...
thanks...
Click to expand...
Click to collapse
so u r able to unlock the sim or not?
cruzzmz said:
so u r able to unlock the sim or not?
Click to expand...
Click to collapse
hello...
i just able to sim unlock the phone via code after flashing this firmware http://rapidshare.com/files/14940579...0_182_Test.exe
but still i cant app unlock the phone... i want to flash WWE rom..
i tried using mtty but then it shows:
CMD>task 32
"Level=FF"
please do help me...
thanks
LiquidSky said:
hello...
i just able to sim unlock the phone via code after flashing this firmware http://rapidshare.com/files/14940579...0_182_Test.exe
but still i cant app unlock the phone... i want to flash WWE rom..
i tried using mtty but then it shows:
CMD>task 32
"Level=FF"
please do help me...
thanks
Click to expand...
Click to collapse
try the hard SPL thread ... there is a program to unlock the phone
cruzzmz said:
try the hard SPL thread ... there is a program to unlock the phone
Click to expand...
Click to collapse
thanks...
the phone is SIM Unlocked now...
but i got this error after using HardSPL-Cavalier-1.0-JockyW
thanks...
LiquidSky said:
thanks...
the phone is SIM Unlocked now...
but i got this error after using HardSPL-Cavalier-1.0-JockyW
thanks...
Click to expand...
Click to collapse
Error 270 ... U must do HardSPL first ... Pls follow instruction on the Hard SPL thread
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
yukster said:
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
Click to expand...
Click to collapse
Have u tried tis tool?
http://forum.xda-developers.com/attachment.php?attachmentid=91644&d=1213100403
what's the end of the story ?
these japanese guys just gone with the wind.
Maybe it's work, because I just did a test on my x02ht. I’m able to modify register through CeRegEditor after SDA_ApplicationUnlock.
Need help to Flash X02HT from JAPAN
HI,
I have been trying desperately to unlock this phone. Before I buy code I need to know it it can be unlocked. When I power on the phone a window keeps popping up with or without asking for SIM unlock code.
I tried JumpSPL and keep get an error: CreateProcess failed with errorcode =30123 - UNKNOWNERROR 0X000075ab.
I still tried HARD SPL -Cavalier 1.0 JockyW and keep getting an error :-
ERROR (270): UPDATE ERROR. The image file is corrupted. Please check your Update Utility.
Please LiquidSky have a file that he used from rapidshare and flashed his phone successfully can anyone share with me please?
I need urgent help
Thanks
I have the same problem. I would appreciate if someone knows how to solve it.
Thanks!
Totalelectronics said:
HI,
I have been trying desperately to unlock this phone. Before I buy code I need to know it it can be unlocked. When I power on the phone a window keeps popping up with or without asking for SIM unlock code.
I tried JumpSPL and keep get an error: CreateProcess failed with errorcode =30123 - UNKNOWNERROR 0X000075ab.
I still tried HARD SPL -Cavalier 1.0 JockyW and keep getting an error :-
ERROR (270): UPDATE ERROR. The image file is corrupted. Please check your Update Utility.
Please LiquidSky have a file that he used from rapidshare and flashed his phone successfully can anyone share with me please?
I need urgent help
Thanks
Click to expand...
Click to collapse
yukster said:
Regarding the App Unlocking, I ran into the same problem. In my case, I could not complete the registry edits that were required to app unlock the phone.
I used the following app, unzip it, copy it into the main memory on your phone and run it via File Explorer on your phone.
Then edit the following registry keys:
HKLM\Security\Policies\Policies\00001001 = 1
HKLM\Security\Policies\Policies\00001005 = 40
Click to expand...
Click to collapse
TESTED and working.......
good ..................................................
I've looked around but no one seems to ever give an answer.
I have an HTC Touch Pro 2 (SPRINT). Every, and I mean every, (even RegEdit cabs) fail to install. I get "Installation of ________ was unsuccessful."
I do NOT get the choice to install onto device--as soon as I select, it fails.
I soft-reset. Nothing.
I hard-reset. Nothing.
I installed form both SD and phone directories. Nothing.
I downloaded the cab again. Nothing.
I am in serious need of help. What's the use of having this phone if I can't do a blasted thing to tweak or personalize it?
Any help welcome. Again, I have listed my problem and what I've done to try and resolve it. I cannot access registry from the phone, and I've tried through activesync but I don't have permission to change the phone's registry.
So this is odd if it happens even after a hard reset. Are there any Exchange security policies being pushed to your phone that may prevent the adding of programs? Have you tried installing anything from the Marketplace? Are you sure that the cab file you are trying to install is for Windows Mobile and is compatiable with 6.5? Can you install a .exe program when connected to a PC?
Guys, I'm having kind of a situation here:
I installed Rogers HTC 621 - 1.30.631.2 (WM6)
http://www.mediafire.com/download.php?5xuh3jv2yg4
That I found here:
http://forum.xda-developers.com/showthread.php?t=381726
The problem is that, now, when I want to leave this ROM because I've been having some problems with it, it won't update. I've tried using SDA Unlock but it hasn't worked out. It always shows: unlockable phone, and right after this box it shows: phone unlocked. But it isn't. Could you guys help me solve this problem?!
Whenever I try installing any .cab files it shows the following message:
Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.
If you could help me solve this only problem I wouldn't even need to update the ROM...
Try the attached HTC Unlock. It is a wrapped signed registry editor that is scripted to change the relevant Policy settings in the registry. Run the .exe on the PC, it will install the program on the device and you find it in Start -> Accessories -> HTC Unlock.
Basically you need to change the RAPI (Remote API) Policy to allow changes e.g. via SDA Unlock.
tobbbie said:
Try the attached HTC Unlock. It is a wrapped signed registry editor that is scripted to change the relevant Policy settings in the registry. Run the .exe on the PC, it will install the program on the device and you find it in Start -> Accessories -> HTC Unlock.
Basically you need to change the RAPI (Remote API) Policy to allow changes e.g. via SDA Unlock.
Click to expand...
Click to collapse
Well, I've tried what you suggested and I'm really thankful, but it didn't work out. I still can't install .cab files and I still can't ulock the cell phone with SDA Security Unlocker because it says "phone is not unlockable".
How I wish anyone could help me...
Did you finally also execute the HTC Unlocker from the Start -> Accessories folder? You should see the registry editor change some settings. For the RAPI part the x'1001 is the policy and it must be set to 1.
There is a more complicated method - doing this by the Microsoft Security Configuration Manager. Hard to find the link to download, look here: http://www.microsoft.com/download/en/details.aspx?id=998 This allows to apply dedicated security profiles (sets of Policies) to the device. If this works however also depends on the active settings in the device OS however. You may need to load the Development Certificates first via Menu "Device -> Add Dev..."
Would it not be the easiest case to just revert to the original ROM for the device? There the CID matches when updating and then you don't need the sequence of "old-OS application Unlock, load patched SPL, load new OS" - simply because the original SPL will pass the CID check. Get to http://www.shipped-roms.com/index.php?category=windows mobile&model=Excalibur and see if you find it.
Which was the original ROM you had on it?
Problem solved.
After looking in some other posts here on XDA I found many solutions and, by working out on them together, I could finally fix it.
I used SP Allow Certificate, SDK Certs, Exc USPL and, in the end, it really mattered.
Thanks to all you guys who keep up with feeding the forum.