Related
This ROM is based on the official German O2 ROM:
http://www.o2online.de/nw/support/downloads/software/xda/xdaorbit/index.html
- replaced the localized packages
- removed the O2 operator package (Settings and O2 Theme)
Big thanks to rvbcrs for helping and mirroring
I don’t have an Artemis... ok, my girlfriend has one, but she would kill me if I use that... so the ROM has not been tested.
Please report all problems here.
!!! This thread is not for questions about unlocking the device !!!
- In case that you have questions about that open your own thread -
Download the ROM by reading and clicking the red text
Some screen captures: (again thanks to rvbcrs!)
whAT about to compile it to nbh back? for exam use dopod Radio, empty extrom. And flfash it back?
Bepe ..!
this is cool
Thanks a lot
---updated---
Thought to try using the PDAMobiz package and replace the ROM and give it a try even though it's based on pdocwrite.. Result is an error during writing at some time.. So kids don't try this is you don't know how to recover using the bootloader or you'll have a brick.
------
I'm actually flashing it at the moment... I hope I won't regret this..
... but somebody has to try..
bepe said:
We had some problems to flash the OS.nb using pdocwrite... if someone has a solution for this, please help us
Click to expand...
Click to collapse
worked with small error, reset works perfect now
I need to upload pics but not allowed here..
Hi,
Can you tell us how you flashed it ? From bootloader results in a CRC/Certificate error.. Using pdocwrite (modified from PDAMobiz) resulted in a somewhat delayed write error here.. So what did I miss ?
eddie2k3 said:
worked with small error, reset works perfect now
I need to upload pics but not allowed here..
Click to expand...
Click to collapse
sparcle said:
Hi,
Can you tell us how you flashed it ? From bootloader results in a CRC/Certificate error.. Using pdocwrite (modified from PDAMobiz) resulted in a somewhat delayed write error here.. So what did I miss ?
Click to expand...
Click to collapse
press voice command button and press reset -colour bars - loaded success
then used ARTE from FTP site, copied os.nb to arte folder and rename it to windows.nb -run upgraderom.bat.
Update:
Never mind. Figured it out..
--
Hi,
What file exactly do you mean (filename pls) ? I only know of the PDAMobiz roms which are installed using a batch file.. The only ARTE I know if the official Dopod firmware update but it doesn't come with a batch file..
eddie2k3 said:
press voice command button and press reset -colour bars - loaded success
then used ARTE from FTP site, copied os.nb to arte folder and rename it to windows.nb -run upgraderom.bat.
Click to expand...
Click to collapse
sparcle said:
Hi,
What file exactly do you mean (filename pls) ? I only know of the PDAMobiz roms which are installed using a batch file.. The only ARTE I know if the official Dopod firmware update but it doesn't come with a batch file..
Click to expand...
Click to collapse
is your device orbit ?
is it cid-unlocked ?
then use winrar to unpack the (bepe) wm6 wwe rom in this page (written in red). flashed using bootloader method.
after u get german rom installed , run ARTE os flash utility from xda ftp.
ftp://xda:[email protected]/Uploads/Artemis/arte.zip unpack
copy os.nb from first folder (bepe) wwe rom to arte folder and rename os.nb to windows.nb then run UpgradeRom.bat
hard reset, soft reset done.
hello
how to run arte flasher on vista 64bit?
thanks
Requires a reset here since the os.nb/windows.nb update never finishes visually.. After that it works fine (after the reset needed during the missing bmp when customization attempts to start), exactly as you described.. Works great
For those wondering.. Works fine under Vista (32 bit version).. No idea about 64 bit version.
eddie2k3 said:
is your device orbit ?
is it cid-unlocked ?
then use winrar to unpack the (bepe) wm6 wwe rom in this page (written in red). flashed using bootloader method.
after u get german rom installed , run ARTE os flash utility from xda ftp (log in properly) link don't work if not logon properly..
ftp://ftp.xda-developers.com/Uploads/Artemis/arte.zip unpack
copy os.nb from first folder (bepe) wwe rom to arte folder and rename os.nb to windows.nb then run UpgradeRom.bat
hard reset, soft reset done.
Click to expand...
Click to collapse
I tried to flash it yesterday with the updaterom.bat file and it just stayed copying to my phone so I thought it did not work, but after killing the process after 25 min and resetting my phone I had WWE WM6 on my Artemis, still I think it is strange that pdocwrite never finishes. Apart from that great ROM some minor issues..
Cant download full ROM, only 24 M and stop, tried few times. Can someone upload to different place. Please!!
bepe said:
This ROM is based on the official German O2 ROM:
http://www.o2online.de/nw/support/downloads/software/xda/xdaorbit/index.html
- replaced the localized packages
- removed the O2 operator package (Settings and O2 Theme)
Click to expand...
Click to collapse
bepe, can you tell me how much free RAM you have? I hope that you have more than 30 MB by removing all the O2 stuff. I never had more than 30 MB after a hard reset and some of my apps need 30 but I have only 20 now.
I was wondering if the apps e.g. windows live messenger are still in German?
eddie2k3 said:
is your device orbit ?
is it cid-unlocked ?
then use winrar to unpack the (bepe) wm6 wwe rom in this page (written in red). flashed using bootloader method.
after u get german rom installed , run ARTE os flash utility from xda ftp (log in properly) link don't work if not logon properly..
ftp://ftp.xda-developers.com/Uploads/Artemis/arte.zip unpack
copy os.nb from first folder (bepe) wwe rom to arte folder and rename os.nb to windows.nb then run UpgradeRom.bat
hard reset, soft reset done.
Click to expand...
Click to collapse
Why i can't download form this link? I saw that: " 530 Permission denied". Pls tell me why? I want to use English. Thanks!
My Orbit is from O2 UK, does it still have to be CID unlocked to get this WM6 on it?
Registerme said:
bepe, can you tell me how much free RAM you have? I hope that you have more than 30 MB by removing all the O2 stuff. I never had more than 30 MB after a hard reset and some of my apps need 30 but I have only 20 now.
Click to expand...
Click to collapse
I dont have the device... but I asked someone for some screencaptures
indiekiduk said:
I was wondering if the apps e.g. windows live messenger are still in German?
Click to expand...
Click to collapse
It really is a WWE rom... I replaced all German files and rebuilded (not edited!) the Registry based on the WWE packages. The screencaptures will prove it
I suppose you really know how to do this stuff. Can you tell me which tools I need for "cookin" my own ROM? I'd like to have it in German and with my own Ext ROM, maybe I can get rid of some apps that waste my RAM. I only need the names of the tools, I'd guess they are on the xda-dev ftp server. And how do I extract the ROM from the installation file? In your signature you have a nice GUI for the Hermes stuff, is it the same for the Artemis. If you want you can send me a short PM in German.
By the way, the link should be: ftp://xda:[email protected]/Uploads/Artemis/arte.zip thats what people say about error 530
Hello,
Well for many days i'm trying to do my own kitchen ROM, and i'm going to be crazy with it... So I ask you some help, please help me ;-)
I've tried to different method, here is first one :
________________________________________
I took this ROM as source Schaps WM6Pro FRA 3.30c :
http://forum.xda-developers.com/showthread.php?t=312604
Extract all the ROM using pkgtool (from core kitchen for artemis) to sort all the file in different package.
From this point I replace all the OEMDrivers folder by the one of B&B v3 to be sure that drivers are Ok.
I also took the XIP folder from the B&B v3.
From this point I build the OS back using buildOS (from core kitchen 2) putting as source os.nb from different build (Orange france one, b&b v3, O2, Schaps_WM6Pro_FRA_3.30c, same result with alls)
I convert the os-new.nb to os.nbh using htcrt.
Temporarly CID unlock the mobile with uspsl and flash it with RUU.
And.... nothing.... Mobile stay at first splash screen displaying all the version of modules and nothig more...
My second attempt :
_________________
Took the O2 Rom, extract it and sort all folders with pkgtool.
Remove all the directories with 0407 as extension and put all the one's from Schaps_WM6Pro_FRA_3.30c with extension 0409.
Change all the .rgu files wich pointing or refering to 0407 language and change it with 0409.
BuildOS the ROM, convert it to nbh with htcrt. Use uspsl, flash the mobile, and same result than first attempt...
What's wrong with what i have done ?
Is this another option i have not done, any another configuration to say my language is 0409 ? Any others parameters ? Why should o took an OS.NB as source ?
Thanks all for your help ?
I think this the time for making the latest released roms to be clean of carrier files, so we get more of free memory and also everyone can build his own one with this rom..
so how about taking these roms and extract => dump files => delete carrier files => delete carrier registries => repack the rom files ==> we get a carrierless rom!!
so anyone with me??!
Hi,
I flashed the dopod release and directly after it has booted the first time, while this popup comes up telling one that after 3 sec it is going to install the carrier specific software, customize bla bla and so on, I did a soft reset. This way you stop it from installing. After that you can mount the extended rom, have a look at the cabs in there and manually install what you like.
This works fine and this way you get your carrierfree WM6.
pronor
thanks for reply!
what about AT&T rom? it has some carrier files in OS.nb.
also dopod rom has some CABs that are includes in OS.nb so after every hardreset you cant make choice of installing them or not because thay are in the OS.nb files.
and to delete them you have to reCock the rom and delete them!!!
My idea is to make a rom that has no little file of carrier or also a tiny registery!! not to flash it as it is!!
Those carrier files are in the extrom, not in the os.nb, aren't they?
I'll change to my other pc, dump the rom and have a look for carrier files.
Edit: Found 67 exe files in the dopod rom, but I think there are no carrier files in it.
Edit #2: Found 2 dopod files in it, dopod_black.tsk (Theme) and P_Sound_Dopod_WWE_0713.cab (Soundfiles)
NightmarE said:
thanks for reply!
what about AT&T rom? it has some carrier files in OS.nb.
also dopod rom has some CABs that are includes in OS.nb so after every hardreset you cant make choice of installing them or not because thay are in the OS.nb files.
and to delete them you have to reCock the rom and delete them!!!
My idea is to make a rom that has no little file of carrier or also a tiny registery!! not to flash it as it is!!
Click to expand...
Click to collapse
Take a look at Pandora's ROM Kitchen (recent thread). It does exactly what you want: take a clean (AT&A) ROM as base and then **** the extra you want yourself...
If you don't want the whole kitchen just take the OS.nb from it (or extract the OS from the official ROM).
Normally operator specific stuff goes in the extrom (that's the real bloat). The primary customisation that starts first is OEM specific (normally) and happens from preconfig.txt in the windows directory. For instance on the official ROM it runs a program to increase the in-call volume, which is very desirable as it means you can hear people when you are in a busy situation.
well, i done littel research about the different files in both Dopod and AT&T roms and made a file list.
you can find some register files in at&t rom *.rgu anyway i think there is also some files are same in name but different in version or build. for example the dialer in dopod support video call while the one in at&t does not support video call but it support PTT.
so here is the file list i hope it help you for knowing the carrier files.
pronor said:
Hi,
I flashed the dopod release and directly after it has booted the first time, while this popup comes up telling one that after 3 sec it is going to install the carrier specific software, customize bla bla and so on, I did a soft reset. This way you stop it from installing. After that you can mount the extended rom, have a look at the cabs in there and manually install what you like.
This works fine and this way you get your carrierfree WM6.
pronor
Click to expand...
Click to collapse
did you look at the extended ROM and the cabs it install's before you pressed the reset button there are a few usefull cabs and settings applied to the device... IE there is a new WLAN driver applied...
walshieau said:
did you look at the extended ROM and the cabs it install's before you pressed the reset button there are a few usefull cabs and settings applied to the device... IE there is a new WLAN driver applied...
Click to expand...
Click to collapse
Hmm, as I wrote I installed some CABS manually afterwards directly out of the ext Rom and everything was working fine for me - but maybe in my noob way of doing so - I forgot something very important though everything worked excelllent as long I was testing it.
Nevertheless, I cooked my own rom now with the pandora kitchen - and this seems to work fine as well
Hi, i´m very disapointed at this moment because can get a working ROM translation of WM6.1 build 19199.
To begín step by step the first thing i want is change folders names like Startup o Program files. I made changes in initFlashFiles.dat, and default.hv. but the ROM don´t boot. WHY????
What are the files i need to edit just to change folders names?.
PD: I already checked initflashfiles.dat is unicode file and remove the first two bytes, that´s not the problem.
Please HELP ME!!! i don´t know if there´s something i miss to do.
I´m very interested for doing this ROM because there isn´t any WM6.1 Spanish ROM for trinity.
Thanks.
Try donating Tom_Condon...
Don´t want anyone´s make an spanish ROM, just want to learn how to do it, but i must be missing something, it couldn´t be so dificult... but i can´t realise where is the mistake....
can anyone help me?
Thanks
axl79 said:
Hi, i´m very disapointed at this moment because can get a working ROM translation of WM6.1 build 19199.
To begín step by step the first thing i want is change folders names like Startup o Program files. I made changes in initFlashFiles.dat, and default.hv. but the ROM don´t boot. WHY????
What are the files i need to edit just to change folders names?.
PD: I already checked initflashfiles.dat is unicode file and remove the first two bytes, that´s not the problem.
Please HELP ME!!! i don´t know if there´s something i miss to do.
I´m very interested for doing this ROM because there isn´t any WM6.1 Spanish ROM for trinity.
Thanks.
Click to expand...
Click to collapse
why you work on .hv files when you have the bepe's kitchen and all rgus you want, only have to compare the rgu from 6.1 with an original corresponding spanish wm 6.0 rgu.....
for muis, you have to translate into sys folder:
base_lang muis, browsing muis and all muis into ***_lang___ folders into sys
to do it, try with restorator 2007 (shareware)
in menus, dialogs and strings, compare them step by step with original spanish mui, with the wm 6.1 WWE, and overwrite the originals with the wwe, you now have double menus id into one, if there are corresponding in spanish and english, check if there are same voices inside, and delete the wwe, if not (if there is only the wwe) you have to translate it, in some hours of work, and if partecipate more than only a person, you can have all muis, all rgu and iniflashfiles.dat translated in spanish...
also for initflashfiles.dat and oemapps you can check them with original spanish 6.0....
I translated into italian, so you can tranlsate into spanish, or german or in every language you want.
Be not discouraged champion... to my this is escaped from my short brain, I don't also have little idea of English, but for what is here you have me
Ok. I axl have the same problem. I can make roms with old kitchen but I am unable to make then with bepe's & ervius. I don't know where I miss something but resulting roms don't boot.
We can try to put in common our researches, so if we are stopped at diferent points we can finish it up.
- I am using as a base rom FAMAN's 4.00 (for me the best spanish rom). I extract XIP from this rom.
- Then I take master bepe's WM6.1. I process it with buildos+package_tools-2.7.exe.
- Edit initflash.dat and check .hv's
- Build with buildos...
Rom doesn't boot at all.
solution found
I found a solution, and get a working ROM...
Is not the kitchen i use all of then, I think is the shellres.dll.xxxx.mui, i have modified it with restorator, i added the missing resources in my spanish mui, from the original working one. After this i delete the shellres.dll.xxxx.mui folder, and place the mui into the dump folder.
After this and after translate the registry and initflashfiles.dat into my language, and change all muis to my country code, the ROM finally boot.
Thanks Ervius and everybody for helping me so much... i have learn so much from all cookers in this forum.
Soon we will release WM6.0 and WM6.1 Spanish ROMS, stay tuned WM6.0 versión is close to finish.
axl79 said:
I found a solution, and get a working ROM...
Is not the kitchen i use all of then, I think is the shellres.dll.xxxx.mui, i have modified it with restorator, i added the missing resources in my spanish mui, from the original working one. After this i delete the shellres.dll.xxxx.mui folder, and place the mui into the dump folder.
After this and after translate the registry and initflashfiles.dat into my language, and change all muis to my country code, the ROM finally boot.
Thanks Ervius and everybody for helping me so much... i have learn so much from all cookers in this forum.
Soon we will release WM6.0 and WM6.1 Spanish ROMS, stay tuned WM6.0 versión is close to finish.
Click to expand...
Click to collapse
well, I'm happy for you!
axl79 said:
I found a solution, and get a working ROM...
Is not the kitchen i use all of then, I think is the shellres.dll.xxxx.mui, i have modified it with restorator, i added the missing resources in my spanish mui, from the original working one. After this i delete the shellres.dll.xxxx.mui folder, and place the mui into the dump folder.
After this and after translate the registry and initflashfiles.dat into my language, and change all muis to my country code, the ROM finally boot.
Thanks Ervius and everybody for helping me so much... i have learn so much from all cookers in this forum.
Soon we will release WM6.0 and WM6.1 Spanish ROMS, stay tuned WM6.0 versión is close to finish.
Click to expand...
Click to collapse
Great job axl79..
I'll try that mui editting
ervius said:
well, I'm happy for you!
Click to expand...
Click to collapse
Thanks Ervius, you where very hepful, without your hints and without your GREAT tools, it could´t be posible.
I love THIS FORUM!!!!
Thanks.
I repeat you that if you want to prove some ROM I offer volunteer...
could you go up the ROM when you finish it??
Bizio said:
I repeat you that if you want to prove some ROM I offer volunteer...
could you go up the ROM when you finish it??
Click to expand...
Click to collapse
In a few days, i will publish a beta ROM based in ausdim WM6.1 light ROM, if everything goes fine, it will be before Sunday.
Maibe my partner and collaborator Nikitto, will realease a WM6.0 ROM in a couple of days, this ROM is going to be published here too...
Spanish Releases are comming soon after the long wait since Faman 4.02, so stay connected for news..
Hello...
I'm argentinian... but i live in italy...
Im free to traslate italian rom in spanish... but i don't now anything about cooking roms and this things... if i can help... i'm here..
axl79 said:
In a few days, i will publish a beta ROM based in ausdim WM6.1 light ROM, if everything goes fine, it will be before Sunday.
Maibe my partner and collaborator Nikitto, will realease a WM6.0 ROM in a couple of days, this ROM is going to be published here too...
Spanish Releases are comming soon after the long wait since Faman 4.02, so stay connected for news..
Click to expand...
Click to collapse
OK COLLEAGUE, he had left you a message in the forum of todopdas hehehe I will continue I attempt here, thank you partner
Nice and interesting.
I am voluntier for anything also, if necessary.
good, we will wait..
.. to see if it already arrives on Sunday
New PROBLEM
Hi all, i´m close to finish spanish translation, but i have some problems.
1- MMS doesn´t appear in messaging, and Send MMS command in contacts options doesn´t work. What are the files related with this?, any mui?. I haven´t touch anything in registry but changed xxx_409 files to xxx_C0A to get files working with my language code.
2- Network Wizard or any cab for setting operator internet settings (GPRS Settings and WAP Settings) doesn´t work, it raise me a "database Error". What are the files related with this?, any mui?.
I know all these errors are caused by me in the process of translation, so in WWE original version these things works. Please Help me to find where is the mistake.
If i fix this two errors, i will be able to release a beta versión of my spanish WM6.1 ROM.
Thanks.
axl79 said:
Hi all, i´m close to finish spanish translation, but i have some problems.
1- MMS doesn´t appear in messaging, and Send MMS command in contacts options doesn´t work. What are the files related with this?, any mui?. I haven´t touch anything in registry but changed xxx_409 files to xxx_C0A to get files working with my language code.
2- Network Wizard or any cab for setting operator internet settings (GPRS Settings and WAP Settings) doesn´t work, it raise me a "database Error". What are the files related with this?, any mui?.
I know all these errors are caused by me in the process of translation, so in WWE original version these things works. Please Help me to find where is the mistake.
If i fix this two errors, i will be able to release a beta versión of my spanish WM6.1 ROM.
Thanks.
Click to expand...
Click to collapse
if you send me the original WWE and translated packages, maybe I can check...
bye!
ervius said:
if you send me the original WWE and translated packages, maybe I can check...
bye!
Click to expand...
Click to collapse
There are not packages, these features are included into the base ROM i`m triying to translate, i can´t separate into packages.
I´m working directy on the dump directory of the ROM, it must be some file i replace with translated one, or any reference in registry.
axl79 said:
Hi all, i´m close to finish spanish translation, but i have some problems.
1- MMS doesn´t appear in messaging, and Send MMS command in contacts options doesn´t work. What are the files related with this?, any mui?. I haven´t touch anything in registry but changed xxx_409 files to xxx_C0A to get files working with my language code.
2- Network Wizard or any cab for setting operator internet settings (GPRS Settings and WAP Settings) doesn´t work, it raise me a "database Error". What are the files related with this?, any mui?.
I know all these errors are caused by me in the process of translation, so in WWE original version these things works. Please Help me to find where is the mistake.
If i fix this two errors, i will be able to release a beta versión of my spanish WM6.1 ROM.
Thanks.
Click to expand...
Click to collapse
I am unable to make a bootabe of 6.1 . I made quite a lot from 6 with Faman, but I miss something in this one.
1.- Did you check inside the mui's to see if here is any reference to 0409?.
2.- There was a problem with the network wizard, check if operators.txt has first line null.
Can anyone give me some insight on this problem. I am porting 21159 to the Treo 700wx, and it keeps stopping on the WM 6.5 startup screen. I can turn off/on the display, but it never progress onto screen calibration or anything else.
I have replaced the gwes.exe file in order to get the rom to boot, as well as wincenls_wwe, but it doesn't seem to make any difference. At the moment, I'm stumped. Any help would be greatly appreciated.
86 views so far, and no replies. That can't be good...
I think I might need a gwes.exe for 240x240 screen on a 211xx build. Does anyone have one?
Any progress?
untarded said:
Any progress?
Click to expand...
Click to collapse
Nope. No responses. I did find a 6.5 rom for the treo 750, but they removed all of the dsm files, so I can't port it. I have to try to manual piece it back together.
This is really a good build, but believe me that stabilniejszy is 21,109, this is fast
stuck at boot screen usually because of
1. wrong xip porting
2. wrong wince_nls
that is what i am facing now also
cruzzmz said:
stuck at boot screen usually because of
1. wrong xip porting
2. wrong wince_nls
that is what i am facing now also
Click to expand...
Click to collapse
not necessarily. i had the same troubles too and i got it working after including HTC's TouchFLO OEM package and ConfettiCore package (which i was deleting before) in SYS.
!Aman! said:
not necessarily. i had the same troubles too and i got it working after including HTC's TouchFLO OEM package and ConfettiCore package (which i was deleting before) in SYS.
Click to expand...
Click to collapse
both of the above is not in the rom? could you share the link of ur successful SYS folder somewhere
cruzzmz said:
both of the above is not in the rom? could you share the link of ur successful SYS folder somewhere
Click to expand...
Click to collapse
i think all of the SYS 21159 floating around have ConfettiCore package inside, so u can try any. i thought it was useless, so deleted it. but it lead to the problem mentioned above. in addition to that, i had to use TOuchFLO OEM package also of my device which i deleted coz i wanted to use M$ default touchflo.
!Aman! said:
i think all of the SYS 21159 floating around have ConfettiCore package inside, so u can try any. i thought it was useless, so deleted it. but it lead to the problem mentioned above. in addition to that, i had to use TOuchFLO OEM package also of my device which i deleted coz i wanted to use M$ default touchflo.
Click to expand...
Click to collapse
sad to say dude of of the rom now have protection on it including urs so i cant use package tool to make it to SYS folder ....
cruzzmz said:
stuck at boot screen usually because of
1. wrong xip porting
2. wrong wince_nls
that is what i am facing now also
Click to expand...
Click to collapse
Already tried this. Both are correct. It's not hangs on the boot screen. It's hanging on the welcome screen. Well it's not exactly hanging. I can still power it on and off. I still get the press the middle button to unlock thing. I can turn the radio on and off. It just never moves on from the welcome screen.
I pieced some of the 750 rom into my SYS. I noticed they had modified some of the .cpr files for 240x240, so I included those as well. Flashing now, we'll see what happens.
Update: Same problem. It stops at the welcome screen.
Tryed using my existing .rom folder, and shell32.dll and shellres.dll. Still no luck.
same problem since 21xxx builds with welcome-center
I'am a german rom-cooker for glofiish m800-device.
i work since over one week on windows mobile 6.5.
I'am not success today.
The Problem is:
- No Calibration (Welcome.lnk) is launched by initflashfiles.dat
but in the file the entry is included
the biggest problem, becouse the device is unusable
- The Startmenu is wrong, only a white screen open. (very small) no solution with gwes.exe from wm61 20924 sys.
- the grey taskbar on the today-screen
i have replaced gwes.exe from working windows mobile 6.1 sys 20924
i have changed shell.exe and shellres32.dll in shell-directory from sys
to change user.hv and default.hv from metadata
to delete user.hv and default.hv from metadata
to replace folder for shell
to replace folder for phone
to replace folder for redist.
to include wince.nls in sys-folder too
The wince.nls is in my xip (rom-directory) (my kitchen need the extracted version of xip.bin)
I don't know what the problem is.
I have ported XIP 21159 from Diamond, from TouchPro, from glofiish m700, from glofiish m500 and much more. I'am sure i use actually an VGA-XIP (from Diamond, 1.post in this Thread)
but i don't know which version this is (21139 or 21159 ???)
all the same problem.
i use my kitchen based on windows mobile 6.1 and included the g'reloc.exe from WM65 Kitchen (forwarder) and the wmreloc.exe.
since my kitchen is ready for wm65. all works great by compiling the new temp.dat (the flash-file for glofiish devices)
I read i must use the same sources for XIP and SYS !!!
But what are the same Sources ???
Can anyone send me an working 21159 XIP for VGA ???
When i try to port "Diamond Payload 21159" from XDA-Developers with Xipport and Xipporterex the xip is ok, but when i insert in my kitchen, the prog "buildos" stop their working, nothing happens in command-window.
So i'am very pleasent when you can send me an working source 21159 SYS for VGA and an working Source 21159 XIP for VGA...
i have big problem with windows mobile 6.5
acutally i try windows mobile 6.1 21114 there are the same problem.
the problem is, after os-logo no calibration screen come.
big problems to call "welcome.lnk"
only whenn i insert in wrong path to welcome.lnk the today-screen display ???
do you know this bug ???
here is the rgu of the welcome-center, i think it's not compatible with m800 ???
is this welcome-center new in the 21xxx-builds ???
over one week and no succed with wm65.
at the moment the same problems with wm61 21115
REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\:M SWelcomeCenter]
"0"="MSWelcomeCenter" ; class name
"1"="wcsan.exe" ; exe to launch
"2"=dword:1 ; perf hint (RAI_PERF_*)
"3"=dword:0 ; app type (?)
[HKEY_LOCAL_MACHINE\Software\Microsoft\CHome\CWelco meCenter]
"Disabled"=dword:0
[HKEY_CLASSES_ROOT\.wcml]
@="wcmlfile"
"Content Type"="text/html"
[HKEY_CLASSES_ROOT\wcmlfile\DefaultIcon]
@="browsres.dll,-6703"
[HKEY_CLASSES_ROOT\wcmlfile\Shell\Open\Command]
@="iexplore.exe file:%1"
[HKEY_CLASSES_ROOT\welcomecenterapp\DefaultIcon]
@="coreres.dll,-20797"
[HKEY_CLASSES_ROOT\welcomecenterapp\SelectIcon]
@="coreres.dll,-20798"
[HKEY_LOCAL_MACHINE\ControlPanel\WelcomeCenter]
"Redirect"=":MSWELCOMECENTER"
[HKEY_LOCAL_MACHINE\System\WelcomeCenter]
"CmdLine"=""
[HKEY_LOCAL_MACHINE\ControlPanel\WelcomeCenter]
"Group"=dword:1
hope you can help...
I'am at the end...
I think WM'Reloc is not compatible with my device ???
Thanks
Everal
everal said:
I'am at the end...
I think WM'Reloc is not compatible with my device ???
Click to expand...
Click to collapse
I had issues with it as well. I had to go back to using g'reloc.
hey guys any solution to this problem? I've been facing it on my Samsung i780.. damn this won't move past the Windows mobile logo.. yet it plays the welcome screen sound.. what a shame..
chef raven,
not trying to hijack your thread but can you please answer my PM.
i've been waiting for weeks now.
thanks