Develop Bugs

calls drop every few minutes

Hi,
phone calls do not last more than a few minutes.
I just hear a ding and the call drops.
I have Jwrightmcps .08 w6 rom (universal one and not jasjar specific) and radio 1.14.1 (it also happen with radio 1.13).
Anyone having this problem?
thanks
Lulazz

lulazz said:
Hi,
phone calls do not last more than a few minutes.
I just hear a ding and the call drops.
I have Jwrightmcps .08 w6 rom (universal one and not jasjar specific) and radio 1.14.1 (it also happen with radio 1.13).
Anyone having this problem?
thanks
Lulazz
Click to expand...
Click to collapse
I do not have such an issue. Why are you using the HTC version of Jwrightmcps' .08 when a JasJar specific one of Jwrightmcps' .08 exists?
In the Phone Settings, try setting the Band to be one of GSM or UMTS and not Automatic. You can even go a step further by setting your Network Selection to a specific Opertaor instead of allowing the Universal to discover for one. If you still have call dropping issues after this, then I guess there is a pretty serious issue.

I experienced the same problem several months ago, it was wm5, i have changed my sim card and the problem was solved.

This rom with 1.14.10 work good

With my O2 Exec on T-Mob I had probs with 1.13 and 1.14 and have now got 1.09 and ecverything is fine

lulazz said:
Hi,
phone calls do not last more than a few minutes.
I just hear a ding and the call drops.
I have Jwrightmcps .08 w6 rom (universal one and not jasjar specific) and radio 1.14.1 (it also happen with radio 1.13).
Anyone having this problem?
thanks
Lulazz
Click to expand...
Click to collapse
Experienced the same (sometimes) with same ROM.
Now upgrading to 2.02.00

I have the same issue.. not related to firmware tho.
Every firmware I tried had the same issue(s). Only firmware I ever had that worked 100% on mine was the orginal firmware, although I cannot say that for certain since I had that version for less than one day.
Now my screen is busted on it and I am spending $300+ in repair to fix it. Once it is returned to me from repair its going on Ebay because I am not happy. Might try WM6 before selling on EBay tho...
Thinking of downgradeing to the Wizard(T-mobile MDA).

Try fixing your phone to GSM or 3G (UMTS) not automatic switching. It worked for me!

still no luck
I still have this problem with Jwrightmcps 2.02 rom and both radio 1.13 and 1.14
I also tried to disable voice command and set the band on gsm...
any idea?
thanks
Lulazz

I share you the same problem. I did every possibe trial but the problem is the same...

it is even worst, now call last only a couple of minutes
trying to reflash maybe a different rom

lulazz said:
it is even worst, now call last only a couple of minutes
trying to reflash maybe a different rom
Click to expand...
Click to collapse
This sounds more like a hardware issue (as lots of people run the ROMs you have tried without this issue). Have you tried using a different SIM to see whether that has the same problem?

try this
go to band & set to gsm only, umts & auto don't work. there is no soft handover from umts to gsm....... only from gsm to umts.
you will see drastic results.
ps, does anyone know how to fix the "no gsm" error?

after an hard reset everything is working fine (I have no other SW installed at the moment) will investigate to see if it was incompatibility with 3rd party software

try 1.15 radio ROM maybe it can solve ur prob.

I had the same problem too. calls would drop after 2 or 3 mins while talking. So i sent for repair last week and collected today. it looks fine now. the strange thing is that if u dont talk u wont have that problem. coz i tried call from landline and leave it like 10mins + , it worked fine.

htinaung said:
I had the same problem too. calls would drop after 2 or 3 mins while talking. So i sent for repair last week and collected today. it looks fine now. the strange thing is that if u dont talk u wont have that problem. coz i tried call from landline and leave it like 10mins + , it worked fine.
Click to expand...
Click to collapse
i still have the problem after upgrading to wm6. Not sure it was the battery problem. I notice i have this problem when my battery getting last shorter.

Radio 1.15

Changelog: none at the moment
Radio-only upgarde guide:
http://wiki.xda-developers.com/index.php?pagename=Radio only upgrade instructions
Download links:
Code:
ftp://xda:[email protected]/Uploads/Universal/Radio/11500_Radio_only.rar
Code:
http://rs45.rapidshare.com/files/21256271/11500_Radio_only.rar

Radio 1.15.00 working fine with Helmi_c AKU3.5 v1.3.
No problems encountered mentioned in other Threads regarding combine this Radio with other WM6 ROM.
Voice Call working in both in / out direction.
SMS works.
MMS works. --> GPRS works.

As the radio being the most problematic for me, I may or may not upgrade...1.09 is working just fine right now.

I am using 1.14 for 3-4 months. I just upgrade from 1.14 to 1.15. No problem until now.

I will upload it to the FTP server, Radio Rom's are allowed.
edit:
ftp://xda:[email protected]/Uploads/Universal/Radio/11500_Radio_only.rar
can someone move it to a safe place?

CWKJ said:
Radio 1.15.00 working fine with Helmi_c AKU3.5 v1.3.
No problems encountered mentioned in other Threads regarding combine this Radio with other WM6 ROM.
Voice Call working in both in / out direction.
SMS works.
MMS works. --> GPRS works.
Click to expand...
Click to collapse
I concur with that. Helmi 3.5 runs good with 1.15.

Someone know how it's work with Helmi 1.1 WM6?
Now I still running 1.13

Pair problems with Parrot 3200 LS-Color
I use my Qtek 9000 with a Parrot 3200 LS-COLOR buetooth carkit.
Generally I must pair again when the carkit reconnects.
I have this problem with all radio rom versions, but with version 1.14.10 I have the problem sometimes.
Is there someone who know a solution for this problem?
In advance thank you verry much!
Regards,
**** Zevenbergen

I m currently using 1.13 so is it better than it or not ?

Trillian said:
Someone know how it's work with Helmi 1.1 WM6?
Now I still running 1.13
Click to expand...
Click to collapse
Flashed yesterday, works fine

Trillian said:
Someone know how it's work with Helmi 1.1 WM6?
Now I still running 1.13
Click to expand...
Click to collapse
I flashed two days ago, and working fine. Also, I thing that ppc became a little faster.

Running 1.15 for two days with Jwrightmcps Crossbow ROM 20108, I must say that it is much better than any other radio I had used before. I was running 1.09, 1.011 and 1.14. None of them was able to pick up connectivity as fast as it does with 1.15. Often, I needed to reset to connect to the network after going through tunnel or going into a lift.
BTW, I live in Singapore and my provider is Starhub, I have since switched my phone to 3G full time after I upgraded radio to 1.15. Previously, I could only fix to GSM network in order to have a relatively stable connection.

Flashed 1.15 two days ago. The best radio ROM so far on O2 UK with Jwriright'2 2.02

I've had not much of an issue so far too. I realised it takes a shorter time to get SMS sent out, and shorter time to pick up the 3G network.

Good Radio
Oh .mygod Thank You Very Much

here are the changes in 1.15 radio from 1.14
- In some cases you'll be unable to connect to GPRS while roaming in a 3G area when having a 2G-only sim-card
That's all. Nothing so important to waste time upgrading to this radio.

I am running JWright 2.02.00 ROM and sometimes, after a soft-reset, the device won't see the WiFi unit. The Wireless todayplugin only states the phone network, and a bluetooth icon, but no wifi anymore. After soft-resetting again, the WiFi will return.

Biffert said:
I am running JWright 2.02.00 ROM and sometimes, after a soft-reset, the device won't see the WiFi unit. The Wireless todayplugin only states the phone network, and a bluetooth icon, but no wifi anymore. After soft-resetting again, the WiFi will return.
Click to expand...
Click to collapse
I have a the same problem, have tried different things, only solution currently is to soft reset, keep "lid" close, lcd down on keypad, while busy "booting up". After few seconds open and enter pin, wifi back !

do i have to hard reset after upgrading the radio only?
i really dont want to install everything all over again.

shlomki said:
do i have to hard reset after upgrading the radio only?
i really dont want to install everything all over again.
Click to expand...
Click to collapse
No need to hard reset

Orange UK and Radio ROM 1.40.30.00

Flashed the new radio ROM and all seemed to be working well. However, my phone cannot make a data connection via G/3G - it just keeps saying 'connecting'. Have now flashed between 1.38.00.10 and 1.40.30.00 three times back and forth with the same outcome - no data connection established with 1.40 but connects immediately with 1.38.
I suggest Orange UK customers keep clear of this radio ROM

This belongs in the WM6 forum why? It should be in the Upgrading forum.

I Upgrade my tytn is R.S.A.(South Africa) I 'm in the MTN networks ,I'm using Duttys rom and I have not problem with the radio rom 1.40.30.00, actually I think is the best so far for voice and data connection.

rabdo said:
Flashed the new radio ROM and all seemed to be working well. However, my phone cannot make a data connection via G/3G - it just keeps saying 'connecting'. Have now flashed between 1.38.00.10 and 1.40.30.00 three times back and forth with the same outcome - no data connection established with 1.40 but connects immediately with 1.38.
I suggest Orange UK customers keep clear of this radio ROM
Click to expand...
Click to collapse
Am using it fine in London.

Funny how radio 1.40 is from a cingular rom, but I am having the same issue with cingular, The data connection will just randomly drop and not reconnect, turning radio off and back on doesnt fix it I end up having to soft reset.

well i've been on 1.40 for about 24 hours now and although no major issues, I am sure that the signal is not as strong as 1.38.00.10 although I reckon the battery life is better. it did look initially when I upgraded that it wasn't going to connect to 3G but it was just a fairly brief delay. I would also say that it is generally slower to connect after soft reset than previous radios... but this is just first impressions. it did allow my internet calling over 3G however which I couldn't get running on 1.38. this is probably just fluke!

Am using it fine in London.
__________________
Hermes: Orange SPV M3100 - Radio: 1.40.30.10 - OS: WM6 Black 2.0 running SPB Plus 3.1 and thats about it!
Reply With Quote
Click to expand...
Click to collapse
From were you have got the radio rom 140.30.10 ,I can only find 140.30.00 .

carbunco said:
From were you have got the radio rom 140.30.10 ,I can only find 140.30.00 .
Click to expand...
Click to collapse
OOPS! Typo! Amended.

gents
this thread is totally unrelated to WM6.
MODS: can you plase move this thread to "upgrading".
Thanks,

jasjamming said:
gents
this thread is totally unrelated to WM6.
MODS: can you plase move this thread to "upgrading".
Thanks,
Click to expand...
Click to collapse
as most posts seem to be heading these days, at least they dont know about the secret "bogun" aussie roms yet....

aussie "bogun" roms will never be released publicly, as they can only be handled by seriously elite, and be apreciated by those who understand "VB"

Problem with radio rom 1.51 on Orange France

Hi everyone,
With latest radio rom (1.51) I cannot connect to the internet with 3G.
When I turn 3G off with Schap's comm manager then I can easily connect through Edge.
I'm a french user of Orange network.
What should I do? downgrade? to which radio rom? 1.50?
I also noticed a problem with the battery life which is a little shorter.
Thanks for your advices

Hello,
I have try version 1.51 but i have the same problem (no 3G data).
I am on orange france too.
I prefer my 1.47.10.

A lot of people are having problems with 1.51 and data, but then you'd know that if you had searched for the topic first...

Ok, but my thread wasn't just about reporting the problem.
I've seen that people haad the same issue but I also wanted to have advices for picking up a new radio rom.
French networks aren't that often mentionned.
Anyway thanks for the answers and I'll give a try to the 1.47.

Apologies, I use 1.50 at the moment but I am considering switching to 1.47/1.48

Nevermind.. and thanks for your answer. As you said, I don't think i'm gonna try 1.50 though.

Can't connect to Internet via 3G, only GPRS.

Hi all,
I've got a problem and can't get my head around it!
I upgraded to the offical Tmobile (UK) WM6, and whilst I love it (much more stable) I just can not connect to the Web 'n' Walk service via 3G. I have no problems on GPRS, and I have no problems with texting and making calls on 3G. Can anyone offer any help?
I've tried all the operator settings available from this group, but haven't tried a different radio rom yet - I'm still on 1.50.
Another thing I have noticed is that if someone sends me a MMS, I get a pop up box saying I have to close the current connection and then download it. This didn't happen before on WM5. If I go back on the net after downloading a MMS, then I get the "connecting" pop up showing again.
Any help much appreciated!
Regards,
Towser

Change radio's
Towserspvm2000 said:
Hi all,
I've got a problem and can't get my head around it!
I upgraded to the offical Tmobile (UK) WM6, and whilst I love it (much more stable) I just can not connect to the Web 'n' Walk service via 3G. I have no problems on GPRS, and I have no problems with texting and making calls on 3G. Can anyone offer any help?
I've tried all the operator settings available from this group, but haven't tried a different radio rom yet - I'm still on 1.50.
Another thing I have noticed is that if someone sends me a MMS, I get a pop up box saying I have to close the current connection and then download it. This didn't happen before on WM5. If I go back on the net after downloading a MMS, then I get the "connecting" pop up showing again.
Any help much appreciated!
Regards,
Towser
Click to expand...
Click to collapse
So let me get the straight you flashed to a wm6.0 rom but you are still using a wm5.0 radio. Try another radio I'm using 1.47.30.10

Vol22002 said:
So let me get the straight you flashed to a wm6.0 rom but you are still using a wm5.0 radio. Try another radio I'm using 1.47.30.10
Click to expand...
Click to collapse
Hi. Yeah I flashed to WM6 (3.60.110.4), and the radio rom that came with it is 1.50.00.00. It's an offical TMobile UK rom. Will try another radio rom, but not sure if that'll work as 3G works for phone calls and texting, but no surfing.
Cheers

Towserspvm2000 said:
Hi. Yeah I flashed to WM6 (3.60.110.4), and the radio rom that came with it is 1.50.00.00. It's an offical TMobile UK rom. Will try another radio rom, but not sure if that'll work as 3G works for phone calls and texting, but no surfing.
Cheers
Click to expand...
Click to collapse
Firstly make sure your settings are ok, use the network wizard i have attached.
Secondly the radio you are using SHOULD be fine however running the tests (in my signature) i found that some radios between 1.40 and 1.54 seem to hinder 3G performance (atleast on my network anyway).
Try 1.47.30.10 and see if that helps?
P.S: your radio version isnt a WM5.0 radio as said above....totally incorrect.

Thanks for the suggestions mrvanx, i'll give the cab file a go. I'm working nights this week, so time is scarce, but i'll give the radio rom a go soon. I spent half the night last night reading up on relatively good roms for TMobile UK, but I left the list I compiled in work! (The other half of the shift involved watching a boxing match between Calzaghe and Hopkins... he he!)
Cheers

mrvanx said:
Firstly make sure your settings are ok, use the network wizard i have attached.
Secondly the radio you are using SHOULD be fine however running the tests (in my signature) i found that some radios between 1.40 and 1.54 seem to hinder 3G performance (atleast on my network anyway).
Try 1.47.30.10 and see if that helps?
P.S: your radio version isnt a WM5.0 radio as said above....totally incorrect.
Click to expand...
Click to collapse
Well I ran the cab file and I found I could surf the web via 3G, but not brilliantly, so I've flashed the radio rom to the one you said and it's a lot better!
Many thanks for your help and the cab file. Much appreiciated!
Regards

Try some Radio ROMs
Towserspvm2000 said:
Hi all, I've got a problem and can't get my head around it! I upgraded to the offical Tmobile (UK) WM6, and whilst I love it (much more stable) I just can not connect to the Web 'n' Walk service via 3G. I have no problems on GPRS, and I have no problems with texting and making calls on 3G. Can anyone offer any help?
Click to expand...
Click to collapse
Had the same issue with several Radio ROMs which I have been toying around with. Sometimes 3G worked intermittently, sometimes not at all.
Now I am back at version 1.47.30.10 and 3G works again and all the time too. And the GSM reception and the battery life with this version is OK too. I suggest you try some Hermes Radio ROMs too to find out which one works for you.
Oh, and don't forget to enable HSDPA and then reboot via HTweakC 2.1b or another tool.

siliconaddict said:
Had the same issue with several Radio ROMs which I have been toying around with. Sometimes 3G worked intermittently, sometimes not at all.
Now I am back at version 1.47.30.10 and 3G works again and all the time too. And the GSM reception and the battery life with this version is OK too. I suggest you try some Hermes Radio ROMs too to find out which one works for you.
Oh, and don't forget to enable HSDPA and then reboot via HTweakC 2.1b or another tool.
Click to expand...
Click to collapse
Thanks for the tips there - I'm now running Schap's WM6 4.30 rom and the 1.47.30.10 radio rom, and i'm back to sqare 1 with 3G reception at work! Even the GPRS seems slower. So i'll try a few radio roms. Only showing 2 bars in work - normally 3. Few freezes with Schaps rom, so might have a try at some others. It could even be TMobile issues in my area. I've got the HSDPA enabled too.
Thanks for your input.