Dear All,
I have a PDA2K with ROM Version 1.40.00 WWE and ExtROM 1.40.176 WWE.
When I try to connect to a network using WiFi the PDA2k connects without any porblems to all networks. But when I try to use WiFi to surf the web with IE or use SkyPe the PDA2k always tries to connect using GPRS. Has anyone got any ideas?
Thanks,
Hugh
repleace radio rom for operator of you phone or the rom inside is not set operator corectli
can you explain it more? cause i have the same problem...thx b4
yeah, i have the same problem wifi connects to network fine, with ip, and good signal, but everytime i try to open a web page, i get page cannot be found. ive tried everything, going to back to orignal rom (cingular sx66 rom), changing radio rom to (1.15, 1.13) and also using 1.40 and 1.42 rom also. is my wifi really dead, can anyone help us out??
also, someone mention something about setting operator, if that's the solution, can anyone provide step by step, how on doing that??, i have the cingular sx66 w/o camera
also got same probs...
Please someone give us step by step guide how to encounter this problems...also,im a novice in this forum...so please help me...
same problem
som1 please help!
sirccchar said:
yeah, i have the same problem wifi connects to network fine, with ip, and good signal, but everytime i try to open a web page, i get page cannot be found. ive tried everything, going to back to orignal rom (cingular sx66 rom), changing radio rom to (1.15, 1.13) and also using 1.40 and 1.42 rom also. is my wifi really dead, can anyone help us out??
Click to expand...
Click to collapse
looks like you have the same problem with mine.
At home i've managed to setting a wireless access point using a WIFI router (Linksys WRT54G), the xda's wifi status is connected with the router (as an accesspoint) but everytime tried to opening a webpage, it keep show the error message "the page cannot be found".
is it possible to utilizing the access point scheme above using my O2 Xda IIs?....
does anybody has sucessfull experience with the scheme i've tried to use above?...please share it with us.....
Hi Guys
I was using Black 2.0 with SPL 1.40.Olipro (HardSPL_v6) and Radio 1.41.00.10 and this afternoon decided to upgrade to Black 2.5 with SPL 2.10.Olipro
Everything worked well, until i got home, where i noticed no matter how hard i tried wifi/wlan would not detect any networks. Did a few searches but decided to go back to my previous config to see if it still worked or if i did any permanent damage to NAND/EEPROM blocks
First i tried Black 2.0 still with SPL 2.10.Olipro and Radio 1.41.00.10 but to no avail.
Next i downgraded SPL to 1.40.Olipro (HardSPL_V6) still with Black 2.0 and Radio 1.41.00.10 then everything worked!!
Immediately after that Black 2.5 went back on still with 1.40.Olipro and Radio 1.41.00.10, the moment WLAN/Wifi was enabled, a window poped up with a "New network detected" prompt.
Those with WLAN problems please try downgrading your SPL to 1.40.Olipro (HardSPL_v6) as i believe 2.10.Olipro may have some bugs?
Please post feedback for those that have tried.
Cheers!
Have you a link to download Hard-SPL V6 ?
I try with V5 and black 2.0 and no wifi start
Well, I am not sure what is posted below is necessary. I have Black 2.5 and SPL 2.10 Olipro (with Radio 1.41). My WiFi works fine ... and I did no special tweaking (other than to install the cingular settings).
HyperZ said:
Hi Guys
I was using Black 2.0 with SPL 1.40.Olipro (HardSPL_v6) and Radio 1.41.00.10 and this afternoon decided to upgrade to Black 2.5 with SPL 2.10.Olipro
Everything worked well, until i got home, where i noticed no matter how hard i tried wifi/wlan would not detect any networks. Did a few searches but decided to go back to my previous config to see if it still worked or if i did any permanent damage to NAND/EEPROM blocks
First i tried Black 2.0 still with SPL 2.10.Olipro and Radio 1.41.00.10 but to no avail.
Next i downgraded SPL to 1.40.Olipro (HardSPL_V6) still with Black 2.0 and Radio 1.41.00.10 then everything worked!!
Immediately after that Black 2.5 went back on still with 1.40.Olipro and Radio 1.41.00.10, the moment WLAN/Wifi was enabled, a window poped up with a "New network detected" prompt.
Those with WLAN problems please try downgrading your SPL to 1.40.Olipro (HardSPL_v6) as i believe 2.10.Olipro may have some bugs?
Please post feedback for those that have tried.
Cheers!
Click to expand...
Click to collapse
Can connect to router but can't locate webpage
I had flashed the rom to LVSW 23/4/07 version, everything works fine except the wifi. It can connect to the router but it can't load the webpage. It just says locating...
Please help.
ROM: LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04
I downgraded my spl to the original 1.06 and that didnt fix it
weinson said:
Well, I am not sure what is posted below is necessary. I have Black 2.5 and SPL 2.10 Olipro (with Radio 1.41). My WiFi works fine ... and I did no special tweaking (other than to install the cingular settings).
Click to expand...
Click to collapse
Well after doing a search it looks like there are others that have the same problem as myself. If everything went well for you good on ya! Im sure there are many others out there with successful flashes running Black 2.5 with SPL 2.10. Im just posting what worked for me.
xpbillgates said:
I had flashed the rom to LVSW 23/4/07 version, everything works fine except the wifi. It can connect to the router but it can't load the webpage. It just says locating...
Please help.
ROM: LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04
Click to expand...
Click to collapse
Are you getting an IP address from the router? Usually its in the format 192.168.x.y
If you have an IP beginning with 169.x.y.z then make sure DHCP server is enabled on your router's config page. Do a search im sure this has been covered here before somewhere in greater detail.
belu said:
Have you a link to download Hard-SPL V6 ?
I try with V5 and black 2.0 and no wifi start
Click to expand...
Click to collapse
Here you go
http://rapidshare.com/files/27700993/Hard-SPL-V6.zip.html
It would be nice is someone made a sticky thread with links to all the threads with this WLAN problem after flashing a rom "hint hint"
I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help
pl55 said:
I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help
Click to expand...
Click to collapse
So you were able to turn on your wifi but couldn't connect?
.... I am unable to turn on my wifi at all.
I am having no trouble at all with WiFi, see signature for setup details.
Had 1.41 radio first, then upgraded Black 2.5, then SPL 2.10, no reasoning for order that I did it in, just did it as the upgrades were available.
anybody knows how to configure wifi in this version?
Lurch3559 said:
I am having no trouble at all with WiFi, see signature for setup details.
Had 1.41 radio first, then upgraded Black 2.5, then SPL 2.10, no reasoning for order that I did it in, just did it as the upgrades were available.
Click to expand...
Click to collapse
Although i dont think order matters, but i did the following which didnt work for me
1. Radio 1.41
2. SPL 2.10
3. Black 2.5
Maybe i should try SPL 2.10 last now that everything is working
Btw did anyone notice a slight decrease in speed/response from Black 2.0 to Black 2.5?
Firstly, thanks.
I have checked it, I can get IP from the router.
I did a Textbook upgraded based on "Mr Vanx" upgrade guide to Black 2.5/1.41.00.10/2.10.Olipro (HardSPL v7)
every thing works perfectly except I can connect to my Netgear wireless router, it detects it and ask for the key, but will not connect.
Not with WPA-WSK or WEP, I have tried everything (removing settings, upgrading router firmware changing from G to B, Hard Reset and not a sausage, it was worked perfectly before the upgrade.
Wififofum2 detects in but failes to recognise the type of security.
I am going to try putting the retail imate back on
I'm on Black 2.5, 1.40 and Wifi turns on, does not detect the network... even with a manual CONNECT through connections
Let it sit a while, with wifi on, 10 minutes maybe, then it decides to pop up Network Detected... truly weird..
Same NO Wifi Issue here too
Running all latest ROMS (see my sig.)
When I turned Wifi, it appears from the device to be working, but it did NOT pick up any signal at all. But...
I DID get Wifi to finally come on, I believe, by turning OFF my Cellular signal in the Connections app, and then turning on Wifi. I think it took a couple of mins to popup, saying my ssid was found at that point.
If anyone finds a real solution, please post!
Hi guys,
I've been reading the forum long time and this is my first post.
My phone is Softbank X01HK and I am currently running Black 2.5 with the buzzing cap, SPL-2.10-Oilpro and Radio 1.38.00.11. My phone works well on Wifi, HSDPA, GPRS-EDGE and GRPS. I have 2 phone numbers with 2 different provider in Hong Kong, Hutchison 3-HK and Peoples.
I used to have SPL-1.40-Oilpro and until yesterday I flashed to SPL-2.10-Oilpro. Surprisingly but weird, I have found my 3G reception at home gets 1 to 2 bar better right after I have SPL-2.10-Oilpro installed. It is so weird cuz I thought the boot loader has nothing to do with the 3G reception, also, everything else still works without any noticeable different.
I was planned to upgrade my Radio Rom to 1.40, but I think I'll stick with 1.38.00.11 for while.
Hope this help
pl55 said:
I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help
Click to expand...
Click to collapse
cheers!!! this one works for me.
I tryed all windows mobile 6.5 rom but my dash couldnt connect any networks.
how is fixed this problem please help
Try your stock ROM to see if wi-fi works? If no stock ROM available try a 6.1... Then @ least you rule out hardware..
Have you tried many different networks? In different locations?
My Dash couldn't connect to my home WiFi, but could elsewhere. I eventually completely deleted and reconfigured my home network and it's worked fine ever since.
I tried in home wireless network with changed all settings(wpa2-web, network name and security) but it can not connect
stylez
I flashed rom windows mobile 6.0 but no change
I have solved my problem with flash firmware of adsl modem I am so sorry to keep bussy:
Airties 6271 firmware version Air 6271 1.2.0.10 firmware is down stupid firmware
I am using the same modem and the same firmware but i can't connect the network, how did you fix it? what's your modem settings sincap ?
and also are you using Biri Adsl I think, isn't it?
mourndare I connect internet via Biri Adsl company and use Airties 6271 modem.My dash connect internet when airties modem firmware is 1.5.10 .