heya,
i use use cardexportII to convert my P3300 into an USB flash disk. and on their web they got win98 drivers in case you want to connect it on an older system.
ok, so i wanted to know:
is there any way, a software or whatever, to connect my P3300 to an existing wifi, plug it with USB to a computer and the computer use it as wifi-adapter/access point to use that network?
i've read about people trying something like that but using bluetooth rather than USB to connect the mobile to the PC, i can use that too if you know how, but in the end what i really need is:
PC->USB->P3300->WIFI NETWORK
because i allways carry a little usb cable with me, and i don't want to carry an BT dongle around if i can avoid it.
and as we are at it, but not really important for me... would it be possible to convert my P3300 to a bluetooth dongle?
PC->USB->P3300->BT NETWORK/DEVICES
oh BTW, my P3300 has WM6 (official HTC release)
thx in advance for any help.
OH LOL, forgot to mention: all this WITHOUT ACTIVESYNC please.
not possible then?
For security reasons the device does not allow simultaneous USB and WiFi connections.
MaskedMarauder said:
For security reasons the device does not allow simultaneous USB and WiFi connections.
Click to expand...
Click to collapse
if i am not wrong, i have read somewhere it was possible to share a WIFI connection through BT or viceversa... so why would USB not be possible, when it's even more secure than BT?
i am getting a little sick of microsoft and their "security" crap... first they disable activesync over wifi and now this? did they never hear of VPN or the like?
/sigh
zandadoum said:
if i am not wrong, i have read somewhere it was possible to share a WIFI connection through BT or viceversa... so why would USB not be possible, when it's even more secure than BT?
Click to expand...
Click to collapse
You can share the phone's GPRS connection, not WiFi. This is so you can use the device as a modem for your laptop etc.
You can not use bluetooth or WiFi when you have a USB connection because you could use it to hook up to two different networks at once, one with the USB cable and one with the WiFi. And then move data across the two networks. Which is a network security risk.
That risk would deter customers from buying the device as it could be used as a back door into the network. An employee plugs into the corporate network with the device (which is 'trusted' and has no password required) then an accomplice connects WiFi to the device and has free entry.
A USB wireless dongle can be bought for £10. Perhaps using that to set up an ad-hock network could be a solution for you?
MaskedMarauder said:
You can share the phone's GPRS connection, not WiFi. This is so you can use the device as a modem for your laptop etc.
You can not use bluetooth or WiFi when you have a USB connection because you could use it to hook up to two different networks at once, one with the USB cable and one with the WiFi. And then move data across the two networks. Which is a network security risk.
That risk would deter customers from buying the device as it could be used as a back door into the network. An employee plugs into the corporate network with the device (which is 'trusted' and has no password required) then an accomplice connects WiFi to the device and has free entry.
A USB wireless dongle can be bought for £10. Perhaps using that to set up an ad-hock network could be a solution for you?
Click to expand...
Click to collapse
where did you get all this info, that it is not possible due security reasons? as you mention, i could use a wifi dongle. and if i wanted to "hack" a network, i could use a laptop connected to a wired lan, and use it's wifi or a wifi dongle to do EXACTLY the same, so the security excuse (wherever you read it) is total bull****.
i want this, because i could just carry a wifi dongle in my bag, but if i could do it with the p3300 usb cable i always carry around, i would have one item less to worry around.
i really don't get all this security nonsense... in first place it needs a wep or wpa key to even connect to a wifi and in second place it's nothing i could not do with a laptop already, i don't understand the fuzz.
i asked the same thing on a microsoft mobile developer blog and the guy just started evading my questions and not responding at all.
Related
Hi guys, I recently destroyed my XDA2 and got a 2s on the insurance
Bluetooth on WM2003 SE if fair poor, but I managed to upgrade the stack thinger to 3900..... so I'm not completely XDA illiterate.
However, the wifi baffles me! I have access to an unsecured wireless network with internet access, and my 2s will connect to it. When I go on the the internet on my XDA, even with wifi connected it still tries to connect GPRS to use the internet. If I keep clicking cancel, it will load the page (presumably through the wireless network's internet access).
It has become clear that I have no idea what I'm doing with regards to networking. Could someone post a quick guide as to how to set up the wifi (from scratch) so that when it finds an unsecured network it will automatically use it for the internet.
Sorry if there's already a thread on this but I really can't find it. Cheers guys
-Mike
just what i need as well, i have just bought a wifi router so i can use the internet on my xda2s.
using the wireless manger -> wireless LAN manager i get:
STATUS: connected to network
SSID: NETGEAR
TX RATE: AUTO
MODE:INFRASTRUCTURE
CHANNEL 11
BSSID: 00-09-5B-D7-DC-2A
MAC: 00-09-2D-0B-C0-A6
but even when i pull the Ethnet cable (forgot how its spelt) out of the back of the router it still stays connected. so im thinking its more my PC than the xda. the thing is the router came with no software so i have no idea if its connected properly. when i pull this Ethnet cable out of the wifi router o get network cable unplugged. The network card is Broadcom 440x 10/100 Integrated Controller. Which I have never used.
if anyone has a any ideas it would stop me pulling my hair out.
Sorry to hijack this thread
mike freegan said:
However, the wifi baffles me! I have access to an unsecured wireless network with internet access, and my 2s will connect to it. When I go on the the internet on my XDA, even with wifi connected it still tries to connect GPRS to use the internet. If I keep clicking cancel, it will load the page (presumably through the wireless network's internet access).
-Mike
Click to expand...
Click to collapse
Mike, I dont think the wifi first and GPRS next works. It doesnt work properly on mine either. If I try a internet access via gprs and a local wifi is readily available, the system does not automatically switch to local wifi.....I think this could be a microsoft issue than a xda issue.
robboy said:
but even when i pull the Ethnet cable (forgot how its spelt) out of the back of the router it still stays connected. so im thinking its more my PC than the xda. the thing is the router came with no software so i have no idea if its connected properly. when i pull this Ethnet cable out of the wifi router o get network cable unplugged. The network card is Broadcom 440x 10/100 Integrated Controller. Which I have never used.
Click to expand...
Click to collapse
when u pull out the ethernet cable from the back of the router, can you still surf the net from you xda or PC?? that seems odd. So either you are not connecting to "your" own router, or someone else has a same router with unsecured setup and you were locked onto their service....if you follow what I mean. what happens if you kill the power to your router? you should definitely notice that the wifi service disappear in your xda and PC.
Dont expect a router to disappear by simply unplugging the ethernet cable, if the router is powered up, it will show up on your xda and the PC although obviously there will be no internet access.....
sorry if i wasn't clear. i meant i was still receiving a signal from the wifi router. i could never use the internet on the pda
update:
i can browse my pc files wirelessly using resco explorer, using the standard file explorer i can view the pc files using \\network/c and i have finally been able to connect to activesync.
however i still can not connect to the internet.
Any ideas, from looking on this forum it seems lots of peeps are having problems with this but nobody seems to have the answer
XDA Wi-Fi Solution....It Works!!!!
Hi,
I'm new to the forum and new to XDA2i (presumably XDA2s is same!) ....
I too had many frustrations connecting the wi-fi...but now I've cracked it, here's how.......
On first very first use (or following a hard re-set) device users are prompted to choose “What do you want WLAN to connect to?” The option bullets are ‘Internet’ or ‘Work’….’Work’ should be selected, this will connect them to the nearest WLAN (if this network is WEP encrypted it should be switched to ‘Open’ rather than ‘shared’ as is often the case).
Next prompt asks for any WEP Encryption ‘Pass Key’ to be input, when doing so omit any ‘-‘ between character pairs. Normal start-up should then be completed. Once device is up and running…..
From ‘Start’ pull-down on the ‘Today Screen’ select…. ‘settings’>’connections tab’>’connections icon’>’advanced tab’>’Select Networks’> pull-down ‘My Work Network’ > ‘OK’ out of selections to save and exit.
Go to ‘Wireless Manager’ in programs, select WLAN icon from main screen (which should turn green to show active), then select mini ‘WLAN’ icon from lower toolbar to see the status of the connection, quality of signal etc.
That did it for me......
Cheers
windupmerchant
Peoples,
I would like to set up my Orbit to work as a modem for my Laptop whilst on holidays ie use it to connect to the internet etc
Question is how can I do same, and the best method given that my laptop has bluetooth and wifi (or direct cable connection?)?
Many thanks
I assume you're on O2 and don't mind paying for GPRS roaming while aboard, which I assume your holiday is also aboard.
You can follow the below link from O2 (setup for windows) which tells you what username/passowrd, phone number and ips you need to put in the settings.
http://www.o2.co.uk/assets/O2HybridNav/Static-files/PDFs/Windows manual set up instructions.pdf
as far as the installing the modem goes, turn on bluetooth, discoverable, and your PC should see your phone in the bluetooth browser and you should be able to add it as a modem.
Thanks for the reply humps
...will try here (UK) first, but back in Australia will use a local SIM for data and calls....cheers
It's not that hard..
You simply need to pair up your orbit with the lappy... the blootooth should detect and install various components (modem etc)... but the one you need to use is Bluetooth LAN. On the orbit, go to intenet sharing, make the pc conenction Bluetooth PAN, and hit conenct - I've not tried it on USB, as the bluetooth is perfect...
Then, just double-click the bluetooth LAN connection on the laptop, and it should piggyback on the back of the orbit's GPRS connection.
USB is easy, start Internet Sharing in the Programs menu, tell it what connection settings to use, select USB, then touch connect. Plug the cable into the laptop and your done.
TangerineTractor said:
I've not tried it on USB, as the bluetooth is perfect...
Click to expand...
Click to collapse
Except it runs the battery down very quickly. USB will charge the battery whilst you browse.... But other than that it is fine.
i was wondering is it possible to share ppc's wifi connection through usb to a lappy without wifi capability?
toosas said:
i was wondering is it possible to share ppc's wifi connection through usb to a lappy without wifi capability?
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showpost.php?p=1315142&postcount=2
It might or might not work though!
This really gets me in the UK... I have hundreds of mins free calls yet get charged sill money for going on line GPRS.... When away its cheeper to plug into a phone line and go on dial up and the same speed.... why hasnt someone come up with a way of using the phone as a 'modem' old skool style. that way i could use the phone call mins and pay for the on line time rather than kbs
Interesting thought GPRS v GSM
Have you tried settings..connections, add a new connection and just specify 'Cellular Line' arather than GPRS...
You'll need an ISP with a dialup number, but it would count as a standard call.
Problem, of course, is that most ISP dialups are 0845 numbers which won't come out of your call allowance, but if you could find one with say an 020 number, you may be getting somewhere (line spped would be v slow, but it would be good enough to download mails and then read them offline)
Hi all,
Firstly, I'm new to winmob devices but as a developer I wanted to get my hands on one and start building some apps. I bought an unlocked TP2 and so far I'm really impressed and happy with it.
Now, I've searched the forums and can't find anything that completely addresses a question I have about Data Connection. It's a bit n00b but as I said I'm new to this I've never had a phone that could connect to the internet before.
I have a data plan with my provider, but when I'm at home I have the phone on the wifi. Sometimes I have it on the laptop at work or home (via USB cable).
What I don't quite understand yet is what is the priority for data connection? e.g. if connected via USB it will try to use the internet connection of the pc? if connected via wifi it will use that as preference? When the phone isn't connected to either, obviously it will start eating data from my plan, but I'm not clear on how the phone uses the internet etc. when on wifi or via the USB cable. I assume there's some kind of "preference" order or setting.
Can someone please enlighten me?
Thankyou for your time!
I've not seen any setting, but I believe it is:
USB ActiveSync (First priority)
Wifi
3G data connection
GPRS data connection (Last)
This is my experience anyway - certainly Wifi should be higher priority than any cellular/mobile connection. And I think I noticed that my web browsing was going via USB cable instead of Wifi when that was plugged in.
I agree with the above post, however I have noticed that If I run an app (lets say the YouTube app) with no active wireless or activesync connection it will use 3G or GPRS depending on available service, however If I then turn on Wireless I have to restart the app, it doesn't seen to automaticaly switch over to the new wireless connection which is a shame.
Tom
You can share a 3G network to a laptop via an HTC Touch Pro2 but, near as I can tell, you can't share a Wi-Fi connection? ie. if my laptop doesn't, itself, have a Wi-Fi connection, can I use my cellphone's Wi-Fi connectivity to connect to a Wi-Fi network?
http://forum.xda-developers.com/showthread.php?t=630337
Posts 4 and 7
Searching is the key
orb3000 said:
http://forum.xda-developers.com/showthread.php?t=630337
Posts 4 and 7
Searching is the key
Click to expand...
Click to collapse
I think that he's wanting to use the phone as a wifi adapter (i.e. wireless NIC) for his laptop, rather than using the phone as a wifi router. In other words...his laptop does't have built-in wifi at all, so he wants to use his phone to accomplish that rather than an external USB stick, card, etc. I've been curious for a while if that's even possible, but haven't come across any methods yet...
sirphunkee said:
I think that he's wanting to use the phone as a wifi adapter (i.e. wireless NIC) for his laptop, rather than using the phone as a wifi router. In other words...his laptop does't have built-in wifi at all, so he wants to use his phone to accomplish that rather than an external USB stick, card, etc. I've been curious for a while if that's even possible, but haven't come across any methods yet...
Click to expand...
Click to collapse
That's exactly it. Most places I go to have ethernet cables I can plug into but, from time to time, I find myself at a place that just has 802.11b/g access points. Rather than carry a PCMCIA wireless adapter around with me so that I might use it once every blue moon, I'd just assume use something I already have on me - my cellphone - as a wireless adapter.
Alternatively, if I, at a future date, got a laptop with a built in wireless adapter, it'd still be nice to be able to have two wireless adapters. ie. maybe the 802.11g network I'm connecting to uses WPA and I'm trying to connect with a Nintendo DS that only supports WEP networks. I could, in theory, use my cell phone as an adapter to the WPA network and turn my laptop into a WEP access point.
I'd say there are several use cases for being able to use a cellphone as an adapter to an 802.11g network, although I will grant that they're probably fairly niche use cases.
I am also interested in this as it would allow me to use my laptop for free internet at places like starbucks where my Tilt 2 gets to connect for free.
Internet>>> ATT Wifi >>> Tilt 2 >>>> Laptop
I too would love this functionality. If anyone knows of an app/registry hack/whatever that enables this, please post the details here.
shdwphnx said:
I too would love this functionality. If anyone knows of an app/registry hack/whatever that enables this, please post the details here.
Click to expand...
Click to collapse
WMWifiRouter (not free) has this functionality. Along with the standard features like cellular to WiFi and cellular to USB, WMWifiRouter also does more exotic connections like WiFi to USB. It's €15, but it's an application with a lot of functionality and the developer who created it is a very highly respected XDA member, who provides many of his other products for free.
DaveTheTytnIIGuy said:
WMWifiRouter (not free) has this functionality. Along with the standard features like cellular to WiFi and cellular to USB, WMWifiRouter also does more exotic connections like WiFi to USB. It's €15, but it's an application with a lot of functionality and the developer who created it is a very highly respected XDA member, who provides many of his other products for free.
Click to expand...
Click to collapse
Awesome, thanks Dave. I'd been thinking about buying it anyway in place of the (very basic) free wifi router app I found on here too, and now it sounds like a no-brainer
Just did it
I just did this very setup earlier with my HTC Tilt 2. I had the phone connected to my Wi-Fi network, and turned off my Wi-Fi on my laptop. Connected the phone to the laptop using the USB cable, and selected "Use as modem" and it was an automatic process...i'm running Windows 7 on my laptop..if that helps..it just worked.
Hello, I have been searching around for a day and a half now to no avail. I figure I will ask here as a last attempt before I go and buy another USB wifi adapter.
I am trying to use my HTC Dash with WM6.5 to tether an available wifi connection over to my Windows 7 PC. Basically trying to use the phone as a wifi adapter. The phone has no cell data service, but can connect to the home wifi network that is here. My Windows 7 PC has no Wifi adapter (I left it behind >.<).
Here is where I am at. The HTC Dash is connected to the Wifi network, and when I try to select a Network in the ICS program, it says there is none available. I have been able to get USB selected in ICS, and the phone connected to the computer. In Windows I see a Windows Mobile Remote Adapter in the Network Connections area when I sync the device in Windows Mobile Center. But no matter what I try, ICS sharing on the phone will not let me select the Wifi connection it has.
Through my searching I have found a lot of information on tethering 2G and 3G internet through USB, and using the phone as a Wifi Hotspot. But those where no help in this.
My friend on a G1 with Andriod can tether Wifi connections to a pc, and I am wondering if Windows Mobile can do the same thing. I can flash my ROM from to 6.0 or 6.1 WM if needed.
Thanks in advance to any advice given, hopefully someone can help me out
UPDATE: Still have no luck. I found a program called ICS Control v.21, but it only works on touchscreen WM phones, not WM standard. Which means a bunch of crashing.
This program would do exactally what I need it to do... just does not support my phone. Well the search continues... looking like I may just have to go buy an USB Wifi adapter soon.
tethering w/wifi
It does work. I'm currently answering this on my 2nd desktop Vista with my S620 via my home wifi network. Waiting for a 25' ethernet connector to hardware to wifi/modem Not quite sure how it is with a wifi adapter but 2 things I do know from experience. You shouldn't need an adapter.
1st: you can't be in Sync Center while trying to tether, at least in my case on a Vista desktop. It won't let you tether while the sync is running (or your already synced).
2nd: (this worked for me) open internet sharing on your Dash/S620, pc connection-usb and be ready to hit connect the 1st couple of seconds after pluging your usb connector into your phone, and give it 10-20 seconds to actually connect. If you wait to long to hit connect, the phone will start syncing with the computer. Won't let you tether.
RE-read post, missed thar "WinMo" remote part. My bad. Don't own Win 7. Don't know what that is.
Question: Is there an active wifi where you are ? From your post it sounds like "yes"
You do not need a wifi adapter. You do need a USB cord.
I tethered with edge for a bit, but then got to thinking. Try Wifi. It worked, but be quick.
Neither one is super fast but Wifi is definitely faster than Edge. Better than not being on the net at all. Occasionally it'll cut out, just unplug usb, get to connect screen, plug in and hit connect. Should be set.
As a side note: I also tried tethering with G1. Xferd pc driver to Vista from G1 but computer says it can't find the driver. Gave up after 2 hours.
G1 tethering works great on XP though.
Hope this helps. Good Luck. Really cool when it works.
Are you using a wifi tether or just usb?
If wifi, what program/version are you using and where did you get it? I got the ICS usb tether working, but my version of wmwifirouter.cab won't even install on the dash. cheers
ee.mike said:
Are you using a wifi tether or just usb?
If wifi, what program/version are you using and where did you get it? I got the ICS usb tether working, but my version of wmwifirouter.cab won't even install on the dash. cheers
Click to expand...
Click to collapse
I'll have to break out the Dash again and let you know. It's been sitting for weeks since I repaired LCD screen and flashed my TMO Wing. Can't seem to stop playing with it.
Give me a little time and I'll get back to you.
You do have a wifi modem, correct ? I was using usb.
Right, just to be clear, my goal is to set up my Dash to receive it's edge data and transmit that out as a wifi signal that my laptop will pick up and connect to the internet. No USB connection. I'm getting an ipad eventually and this is all to avoid that stupid 3g garbage they're hawking.
I tried a program called wmwifirouter.cab but was unsuccessful. An ad-hoc wifi network was created by my phone and my laptop was connected to it but couldn't connect to the internet. And my phone kept crashing.
Any ideas? Thanks
ee.mike said:
Right, just to be clear, my goal is to set up my Dash to receive it's edge data and transmit that out as a wifi signal that my laptop will pick up and connect to the internet. No USB connection. I'm getting an ipad eventually and this is all to avoid that stupid 3g garbage they're hawking.
I tried a program called wmwifirouter.cab but was unsuccessful. An ad-hoc wifi network was created by my phone and my laptop was connected to it but couldn't connect to the internet. And my phone kept crashing.
Any ideas? Thanks
Click to expand...
Click to collapse
Well, in your case, I won't be any help. What I did was run a 2nd computer off of my Dash with a Wifi Modem.
XP in another room with a wifi modem attached on Comcast, Dash on wifi and usb to Vista computer, since I didn't have a 25ft ethernet cable at the time.
Was running Vista-Dash-wifi modem-XP to comcast so I could run 2nd computer without being hard wired.
I'm familiar with wifirouter cab. It let's you use your phone like a hotspot, correct ?
In all my searches for various things for the phones, I thought I saw a different application that did the same thing. Possibly might even have it. I'll check and upload for ya if I find it. Have hundreds of cabs/zips to search. Let you know.
Possibly google it and you might find it yourself. There's a program called: WalkingHotSpot online for $24.99 if you don't mind spending. Dash isn't listed as a supported windows device but looking at the other phones listed my guess would be it should work. Try their DEMO version, see if it works.
Good Luck.......
2AM and I was just wondering......When you received your phone, you also got a usb cable with it, right ?
Why don't you just usb Dash to laptop and use "internet sharing" ????
My plan is to set this up for an iPad, which doesn't allow internet access over a USB cable, so USB tethering is out, has to be wifi.
ee.mike said:
My plan is to set this up for an iPad, which doesn't allow internet access over a USB cable, so USB tethering is out, has to be wifi.
Click to expand...
Click to collapse
Do you have a home computer ? If so, get yourself a Wifi Modem and set up a home network. $40-60. Although Comcast sold me mine for $20 and I get to keep it. I can get all 5 phones on the internet at the same time, not that I need to. It'll also be so much faster then running thru Edge. Besides the fact video's don't play for crap tethered running through Edge. Just a suggestion.
My opinion stands concerning Apple. Get ready to cough up more fees for internet (ATT). They're doing away with unlimited data. Did you see their prices ?
You'll never catch me with ATT.
I just put WMWifiRouter on my TMO Wing 6.5. let you know how it worked. Setup went fine, so far.
did you try downloading the actual .cab from WMWIFIROUTER.COM it's only a trial for 21 days, the "Free" versions don't work on the dash i've tried many of them.
once you install and get it set up be sure to write down the Access ID and Password it gives you so you can connect to the WiFi signal beaming from your phone from your PC. It works for me to tether a WiFi connection from my Dash to PC though I prefer the more stable Internet Sharing USB to PC and I have an Unlimited Data Plan.
WMWIFIROUTER also lets you tether a connection from your phone via bbluetooth.
I use WMWiFiRouter and its a life saver. It lets you pretty much tether any connection to any other.
Just yesterday I was at a meeting in a resturant with some clients and used it to hook my netbook to the internet and used bluetooth as the connection to the phone. Yes, Internet Sharing can do that, but it has alot more it can do too.
You can use Bluetooth, USB (it shows up as a USB modem), or even set it up as a WiFi Router.
Very cool program and it works perfectly on the Dash. I love it.
I never tried the trial version. A friend of mine showed it to me, so I just bought it. It's under $20. Well worth it if you run into that situation often.