For example, how input '\' ?
press the SYM (symbol key)
indiekiduk, big thnks, I am stupid ))
topic is closed
Related
I really hate this process..
I want to get the deadkeys back and assign it to the fn+sym key.
Unfortunatly the key code of deadkeys on pro2 is not the same has other devices.
looking at the windows folder or the rom, we find the usual file responsible for the keyboard layout/keycodes. On this case et9.rhodium.www.kmap.txt and messing around with it, i can make the fn+sym do other things but i just can't find the deadkeys code.
Again looking at windows we find that the file eT9DeaKeys.txt is there !!
I'm just missing the dead key keycode to assing it to fn+sym instead of opening the symbol keyboard.
Any help/ideas ??
sorry for the noob question. What exactly is/are the deadkeys?
ctrl, shift, alt
no it's the function found on other devices like xperia , it's the "au" key.
like you press a + "au" an it gives you à or á.
The function is called deadkeys and the keycode responsible for that is 7A that the keyboard driver does not have.
I'm asked for help to try and get that back..
If "I" have success then i can map like fn+space (like on kayser) to intead of opening the xt9 menu to cicle throu other options.
Only time will tell..
Did you find any solution for this? I am also looking forward to entering accented characters just like on Kaiser.
I ask this again, as my question was embedded in my other posts :
How do you get dead cycling to work ? On my TyTN, when writing an email for example, if I type "e" then "Fn" + "Space" it used to role through the "special caracters", "e"->"é"->"è"->"ê".
Looking at the "eT9DeadKeys.txt" file it looks like this should also work on TP2. What's the key combinbation to make it work ?
Format:
// c0, c1, c2, c3,..ck, where
// characters on the first column (c0), trigger the dead-cycling
// (c1,...,c3,c1..) when Symb + [first column character] on SP,
// or Fn + Space (PPC) and the current character macthes character
// on the first column.
Thanks
Harvey
Does this no longer exist on TP2 ? It worked on TyTN. Does anyone know how to make it work on TP2.
Thanks for help, I find this feature really useful, it would be a shame to have lost it.
Harvey
Not sure if it works as I haven't got one yet... but I read that if you pressed and held a key the alternates for that letter would show up (i.e. the accented variants).
give it a try,
wait, here's the bit from the manual:
To enter accented characters
1. Tap and hold a key with accent options (for example, vowels) to display the accented characters bar.
2. Slide your finger left or right on the screen to select the accented character you want to enter.
3. When you have selected the character, release your finger to enter it.
Tip You can also use the Numeric and Symbol mode to enter accented characters.
For more information, see “Using Numeric and Symbol Mode” in this chapter for details.
Thanks, but that is not exactly it... what you describe is on the virtual keyboard, and it works fine (tap and hold then move your thumb onto the one you want and finally realse).
Unfortunatly, this doesn't work on the physical keyboard. If you hold key pressed, it simply repeats it.
Surely some one can say whether this has simply been lost between TyTN and TP2.
Does no one use this feature on TyTN ? I found it great, just type the caracter you want then "Fn"+"Space" to get all the "accent" versions. It alos worked for "(" -> "[" -> "{", and other similar, virtually, you could get any symbol without ever using the symbol pad.
Has any one else noticed this has gone missing between TyTN and TP2 ???
Harvey
I know what some of you are thinking... there is a SYM button right on the keyboard (function + ,), but this isn't what I'm looking for.
On WM6, if I typed ( (ALT + Q) and then pressed the spacebar WITHOUT releasing the ALT key, it would cycle through other symbols like [, {, <, and so forth.
This option is no longer present in WM6.1 and I was wondering how to get the functionality back. It was really handy when it came to doing the alternative symbols that aren't always available on the hardware keyboard.
Thanks in advance!
It's really truly able to have a multi-touch keyboard on a resistive screen WinMo!!
it may takes some time.but then how many people would still use Windows Phone classic(except HD2)?!
MulkeyTouch = MultiTouch Key(board)
for more introduces pls read the following Notice.
Requirements
WVGA/VGA resolution[actually the technology works for all resistive screen-devices]
.NET CF 3.5 or higher
How it comes true?
read my first thread:
Multi 2.0 - Show and Explain Dual-Touch Technology On Resistive Screens
Here're some pictures(I've tried making a demo video.but it doesn't seem good.these are the shots of the video)
It's a WP7-style keyboard.It hasn't been finished.it can be used to input letters only..no numbers or symbols but "." and ","
[I used a stylus just to let you see more clearly.]And it proves that the screen is resistive.(It's TP2)
Notice
multi-touch keyboard
= dual-touch keyboard
= you can hold Shift key and press any letters' key at the same time to input capital letters
but you can't press two letters' key at the same time.it doesn't makes sense.
as my limited ability,i'm not able to write a real keyboard (in Native code.)
this is an 'app-in' keyboard..
(the keyboard have to run in the app.you can't use it to input texts to any other textboxes outside the app.)
But it shows the capability of having a multi-touch keyboard on resistive screen.
and of course it can be developed as a real system keyboard.
it doesn't work very well.the second key it detects may not the key you press especially when the key is far from the Shift key(such as P,O,I,L,K)..
but it's possible to add a function to modify the position values so that it can detect properly.
so i make another app called Modifine.(means to "modify" something to make it "fine")
but the modified result doesn't seem very good yet-.-!!...
Much better now..
Download
The NEW file MulKeyTouch 1.0 - (W)VGA.7z works for WVGA and VGA resolutions!
It has only one .exe file.but you'd better extract it to any one directory before run it.
cuz it'll create an Modifine.txt file on the directory to enable Modifine mod.
Please read the next post about how to use.
How to use it.
There are 4 ways to input captial letters:
[Normal way]Input 1 captial letters.Just press the "Shift" key then click any letter's key.
[Normal way]Input ≥1 captial letters.Click the "Shift" key twice then you can keep inputing captial letters
[Quick way]Input 1 captial letters.Hold the "Shift" key then move to any letter's key.It's a better way to input letters that near the "Shift" key such as "Z","A","Q","X",etc.
[Quick dual-touch way]Input ≥1 captial letters.Hold the "Shift" key and press any letter's key.
About Modifine
Does the second key it detects is not the key you are pressing on?
In particular the keys far from Shift key such as "P","O","L"
Then you may have to modify the position it gets.
Different screen may has its own dual-touch ability.
So you'll have modified values set by yourself.
1.Click "Modifine" button.
2.Click "Start Modifine!" button.
3.Hold the central of the "Shift" key.
4.Immediately draw follow the green line from lower left corner to top right corner.
5.Click "Back" button.
6.Enable the Modifine mode by click the "Smile" key(it's on the lower left corner of MKT keyboard.NOT the "Modifine" form's keyboard.)
7.Test it by input captial letters in the [Quick dual-touch way]
A much better way to see where the modified position go:
Check the "Show touch points" checkbox on Modifine form.
You can see two points while you input captial letters that are near the top right corner.
Red Point - original detected touch point
Green Point - modified point
I know there's a bug that the new points come but old points were not cleared.as i think you can find out the latest points.and for better running speed.i'm not going to fix it now.
PS.the app's icon(in 32x32 size) writes "没课逃~" which means "No classes to be skipped" in Chinese.
and Chinese pinyin of the three characters is "Mei Ke Tao",whose shortened (is MKT) is the same as MulKeyTouch's.
I use it to commemorate my dropping out of school~
Sorry for my poor English.
looks promising. keep up the good work
Woah! this is Awesome.. but i use Android on my HD2...whatever..
YOU GET A COOKIE! (Thanks)
Dude keep up the Awesome work..
now thank me for thanking your a** x'P
nice one bro, keep it up!
plz release for qvga.
thanks!
I believe many members will stay on WM for a while
Thanks!
It seems that you like WP7 keyboard
Gorgeous work. I'll look on it right away!
So, unfortunately, I cannot test the keyboard properly because I'm running VGA device (Diamond) and the textbox overlays the keyboard from the top. Maybe you can set Anchor property to TextBox? or there maybe is another way to change the textbox size dynamically?
otherwise it looks neat
If you need any help in implement the Multitouch for the HD2, write me a message
PaulosCZ said:
So, unfortunately, I cannot test the keyboard properly because I'm running VGA device (Diamond) and the textbox overlays the keyboard from the top. Maybe you can set Anchor property to TextBox? or there maybe is another way to change the textbox size dynamically?
Click to expand...
Click to collapse
thx for ur feedback!
MulKeyTouch 1.0 - (W)VGA.7z is released.it works for WVGA and VGA resolutions.
deepv84 said:
plz release for qvga.
Click to expand...
Click to collapse
sorry.may not..
thx all~
支持中国朋友~呵呵~非常感谢~
Hi guys.. I have few keyboard questions, and i hope you can answer them:
1. How to set smiley button instead of "enter button" (like on gnex).
2. How to permanently set comma button instead of settings/write recognition etc button)
Thanks in advance