bluetooth probs after schaps upgrade. - 8525, TyTN, MDA Vario II, JasJam ROM Development

I just flashed schaps rom 3.60a and now my bluetooth will not turn on. this has happened before and normally a hardreset fixes the problem but does anyone know of a way to fix it with out defaulting the device.
thanks a bunch.

it is my problem. I can't turn on the bluetooh....
i need a solution

Why don't you look in the schaps 3.60 thread?
There is no soultion right now
Just set the checkbox to be on for Bluetooth and reboot the device.
There are more eligant solutions, but you must search to find them

I will help you a bit , because you should also do something by yourself to solve it.
Look in the schap's 3.60 thread . In the last pages (5-10) there is a permanent solution by deleting some registry values about SAPsettings I think.Good luck

Related

WM6 issue: Locked out by Device-PIN (password incorrect)

I've been searching the forum all over, cause i'm pretty sure i saw someone else report about this too somewhere on this forum, but i can't find it anywhere anymore... Here's the horrific problem...:
With WM6 (Official Dopod SEA, no SPL) i already encountered two times the horrifying message "Password Incorrect" when i want to login again after a reboot.... No matter how many times i fill in the CORRECT password (ie. Device-PIN), it just keeps me out... This is going to be the second time in 3 days i'm gonna have to do a hard reset (i guess it's time for a backup program), and this has pissed me off completely...
I don't dare using a PIN anymore now... cause it's my only (working) phone right now...and i rely on it.
These lockups happened everytime i made a change to the device like installing an appplication or tweaking something in the registry. After the reboot i'm locked out...
Anyone any ideas what causes this, and how to prevent/fix it ?
I have the same problem.
Just did ANOTHER hard reset. And the problem is gone. I'm still investigating.
Feeling that it might have to do with the programs being installed.
I have the same ROM as you.
Keep posting.
joymike123 said:
I have the same problem.
Just did ANOTHER hard reset. And the problem is gone. I'm still investigating.
Feeling that it might have to do with the programs being installed.
I have the same ROM as you.
Keep posting.
Click to expand...
Click to collapse
I'm still busy 'rebuilding' this sucker... But as for now can you confirm it didn't happen again even after editing something in registry or installing an app ? That's when it happened to me everytime (while the PIN was enabled during this)...
And the weird thing is that i'm running exactly the identical software-setup as on previous ROM's... like mUn's WM6, LVSW's, original WM5, GPS WM5 and then some... But never ever i had this problem before... i'm thinking more something like bug in new WM6, or maybe the HTC taskman...?
Edit: i added SpbBackup to todays setup....so hopefully when it happens again, i can recover of it more quickly... Also fiddled around the reg until i made sure i did ALL tweaks i want... I'll wait a few days with a PIN this time...
Locked out
Same thing with me, pin disabled until further developments of this weird bug.
I can confirm this bug. Happening to my friend with the latest PDAVIEt's ROM based on DPOD WM6 official.
When u flash your ROM and a PIN was setted, you'll be stuck at the boot with a message that tells you : Your mother F* password isn't correct...try again...and Again .. and again...
the only Sollution is to reflash.
Weired, not !!!!
I'm tired on updating & downgrading.
I'll cook my own ROM now
Ok...let's start summing up all that software in our devices... here i go for mine:
-Stowaway BT keyboard driver
-Saman WM5NewMenu
-David Andrs Sun'n'Moon
-Spb Backup (new this time )
-Spb PocketPlus 3.2
-Spb Weather
-Spb PhoneSuite
-Ilium Newsbreak
-Caywen Kevtris 2
-larna iContacts
-Google maps
-DeveloperOne AgendaOne and Codewallet 2006
-Coreplayer
-Chi-Tai Batterystatus ext
-ATIfix
-Resco Explorer2007 and Radio
-MS VoiceCommand 1.6
-TomTom 6.03
torpie13 said:
I can confirm this bug. Happening to my friend with the latest PDAVIEt's ROM based on DPOD WM6 official.
When u flash your ROM and a PIN was setted, you'll be stuck at the boot with a message that tells you : Your mother F* password isn't correct...try again...and Again .. and again...
the only Sollution is to reflash.
Weired, not !!!!
I'm tired on updating & downgrading.
I'll cook my own ROM now
Click to expand...
Click to collapse
I wonder if this is related to the problem with the DOPOD ROM (and its derivatives) changing the Device Code in TomTom Navigator? It doesn't happen with any other ROM, and has caused problems with TomTom refusing to issue a new activation code. The only solution to that is to regress the ROM to WM5, or flash a non-DOPOD one.
I don't see at all what TomTom has to do with the specific issue in this thread...
WM6 password bug
It is a known issue and it was WM6 bug. Was reported to MS. With PS turn on, when you take out the battery, WM6 will forget the password. Therefore cannot turn on.
Moaske said:
I don't see at all what TomTom has to do with the specific issue in this thread...
Click to expand...
Click to collapse
Probably nothing, but if the DOPOD ROM seems to be misinterpreting password information, it could be the same bug that misinterprets the Devcie Code. Strange thya both only seem to be occuring with DOPOD derivatives.
NeilM said:
Probably nothing, but if the DOPOD ROM seems to be misinterpreting password information, it could be the same bug that misinterprets the Devcie Code. Strange thya both only seem to be occuring with DOPOD derivatives.
Click to expand...
Click to collapse
Well, i think this has a lot more to do with the fact that you changed the OS image... Although i cannot explain why the cooked MW6 versions do not display this behaviour...
cptanz said:
It is a known issue and it was WM6 bug. Was reported to MS. With PS turn on, when you take out the battery, WM6 will forget the password. Therefore cannot turn on.
Click to expand...
Click to collapse
Correct! Taking out the battery also forces a reboot... So, every reboot makes it 'forget' the password so it seems...
Incredibly that M$ even dared to release this to OEM's....and even worse: they haven't fixed it yet!!!
Come to think of it....: i never had this issue with one of the cooked WM6 ROM's (though you get batterydrain problems and slower performance in return).... That's really strange...
Could it have something to doe with the fact that the Dopod ROM has "HTC_P3600i" in the 'About' screen ? (meaning it's for some forthcoming hardware, and NOT the standard P3600 ?)
I've got the same problem too and have tried several ROMS with the same problem. PdaViet 4.00.5, Gullum, etc with the same problem. Problem is, I cannot deal without a PIN as my company exchange server enforces a policy to set a PIN. I've gone back to WM5 now which is very very stable until a solution is found.
Moaske said:
Come to think of it....: i never had this issue with one of the cooked WM6 ROM's (though you get batterydrain problems and slower performance in return).... That's really strange...
Could it have something to doe with the fact that the Dopod ROM has "HTC_P3600i" in the 'About' screen ? (meaning it's for some forthcoming hardware, and NOT the standard P3600 ?)
Click to expand...
Click to collapse
Actually I'm using a modified PDAVIET Rom, but I didn't have any i in my about screen when I was using the official dopod.
I'm removing my battery now to have a cold start... I don't have any pin or password problem, even if I'm using a pin protected sim and a pin protected device (two pins at startup)
Ciao
wm6 password bug?
i've got the same problem, with an e-ten x500+....
Very strange
I just want to tell you that I never had this problem (which would be terrible for me, cause using Exchange Server you must enter a password unless you do a special registry hack).
I used mun_rus WM6 ROM and I am using Bepes German WM6 ROM and I never had any problems with the password... very strange.
*Bump*
So it seems to be narrowed down to pretty much all official WM6 rom's, but has anyone found out yet if there's a way to fix this ? Does M$ know ? Have any of the cooks here found what the difference between the WM builds is, that causes this terrible issue ?
I'm still on the Dopod WM6 rom, but my device is totally unprotected now.... unacceptable... (apart from having to deal with me to get your hands on my Trin)
I've been on the PVIET 10 rom for a week with PIN code activated without any problems.
Today I decided to change the dialpad, and as soon as that happens, after a reset, I can no longer enter my PIN.
Anyone having the similar problem?
Me too
I was PDAViet for over a week, I had issues with TOMTOM, when I re-installed and did a soft reset I got the device code error. I had no choice but to do a hard reset and start over again. I was using Ausdim prior to this for ages and never had this problem.
I meet the same problem with rom Faman 3.1 Fr
I read somwhere : a bug report about this is present on the Microsoft website. It is a know issue from Microsoft WM6.

problem with bluetooth please help me!!!!

Hello friends
i have a problem with my hermes when i enable my bluetooth through comm manager it will stay off after a soft reset the problem is still there but after a hard reset the problem is gone i can use my bluetooth so i installed all mine tools like navigone etc the bluetooth is still working but after 2 or 3 days the problem comes back i dont know how iam using schaps 3.60 and i need my bluetooth can some one please help me
ps when i want to search for other device i got a error message "problem with bluetooth hardware" i dont believe it is a hardware fault because after a hard reset i can use it again but then i must install al my software again
please please help me
I would go to thte thread dedicated to Schaps 3.6 rom. You will find that bluetooth issues are known and (I think) may have a solution available.
WB

Any Soft Reset Database (email ect.) corruption fix?

I don't think I ever saw a resolution to this problem, is there a solid fix to the soft reset problem exhibited by Dopod's WM6 Rom. Currently running rom version 3.00.707.18 (07/24/07)
The problem is simple, set up some IMAP devices, configure, Push Email, Pair a bluetooth device. Soft reset the device a few times and eventually one or all the settings get lost. Added email accounts get lost, Paired bluetooth device is no longer paired, ActiveSync loses the password... you get the idea
Hi,
You should try the latest ROM releases, i never had that problem again since.
I'm currently using build 18533.0.7.0 without any loss of information after a soft-reset.
Bye.
shoey5 said:
I don't think I ever saw a resolution to this problem, is there a solid fix to the soft reset problem exhibited by Dopod's WM6 Rom. Currently running rom version 3.00.707.18 (07/24/07)
The problem is simple, set up some IMAP devices, configure, Push Email, Pair a bluetooth device. Soft reset the device a few times and eventually one or all the settings get lost. Added email accounts get lost, Paired bluetooth device is no longer paired, ActiveSync loses the password... you get the idea
Click to expand...
Click to collapse
for mail account being lost after few softresets, you can try the mail account recovery software
http://nicolasmauri.blogspot.com/2007/01/wm5-utility-recover-your-lost-mail.html
it have repair after softreset feature, which give you auto repair your mail account with your provided info.
it works for me using pdaviet's rom
Hi, just tried last build 18533.0.7.0 (faman 3.6) but i have the same problem.
lost email accounts can be repared with the mailaccountrepair.exe app and works fine. But GPRS settings, wifi keys , BT paring disapear too on soft reset.
we realy need a solution/fix
regards.
Up !
all new roms cooked with the dopod official wm6 have this problem
can't find a solution, except don't soft reset...
people can live without softrest ?? lol
does this affect all new wm6 build on other phones? or just dopod's trinity rom bug?
anyway the first wm6 "leak" rom for trinity is not affected by this problem.
We allready know that!
All the rom's based on Dopod wm6, have that problem.
It is something from XIP section and not from the OS.
I have allready contact with mun_rus and ervius!
Mun_rus think's the problem is from the Dopod nk.exe.
So this is a bug found only on Trinity device's cause the fault from Dopod wm6 XIP!
All the new cooked rom's today use the XIP section from Oficiall Dopod wm6 rom's.
The only think sometimes changed in XIP section by cooker's is
coredll.dll-(From change the OS version) and
flashdrv.dll-(To merge the extended_rom)
Also sometime's edit the boot.hv and boot.rgu.
All the other file's in XIP stay the same.
The first wm6 leaked rom for trinity is not affected by this problem cause mun_rus use XIP section from ovosleep (Dont know where ovosleep found it).
Thank's
This is what I do and it really works for me:
[!] For prevent password and account dissapearing u should (you should make this procedure immidiatly after first soft reset ):
1. Set up your connection settings
2. Open IExplorer / Set up Ineternet connection / Open some internet page
3. Click Disconnect button to close internet connection
4. Hold power button and turn off your phone
5. Power on your phone.
After that procedure your password wont dissapear. I think that you should repeat the same for mail account (set up mail account / try to send or recieve your mail / hold disconnect button / turn off your phone)
dta1974 said:
This is what I do and it really works for me:
[!] For prevent password and account dissapearing u should (you should make this procedure immidiatly after first soft reset ):
1. Set up your connection settings
2. Open IExplorer / Set up Ineternet connection / Open some internet page
3. Click Disconnect button to close internet connection
4. Hold power button and turn off your phone
5. Power on your phone.
After that procedure your password wont dissapear. I think that you should repeat the same for mail account (set up mail account / try to send or recieve your mail / hold disconnect button / turn off your phone)
Click to expand...
Click to collapse
Yes this is what mun_rus say on his first wm6 release.
Maybe that help but...
In many time's after you flash a new rom and after the auto-costumization end the device auto soft reset.
So after boot again maybe you allready have corruption your registry!
Thank's for the solution but we have to focus at these problem and find the real soution!
I allready make my XIP test's but i nead help from someone to really know how.
Thank's
I know that ausdim,but that´s what I do and afterwards I clean the registry with sktools.Seems to work. ;-)
ausdim said:
Thank's for the solution but we have to focus at these problem and find the real soution!
I allready make my XIP test's but i nead help from someone to really know how.
Thank's
Click to expand...
Click to collapse
I agree, problem needs to be figured out and corrected, makes WM6 on Trinity pretty useless otherwise
Is any one to know about XIP's for help??
I upload the two xip's.bin
The one is from the first leaked wm6 for trinity and the other is from Dopod wm6.
We whant to replace the nk.exe from the new xip.bin with the old nk.exe.
Also we whant to merge the extended_rom.
Please these is very usefull for all of us couse make the trinity doesn't loose after any soft-reset tha mail acount's the wifi data and few other think's.
So if any one know (Bepe,ervius,mun_rus.....) please help.
Many thank's
i'm a bit confused.. i've tried almost every ROM for the trinity, and i've never lost my account/connection settings after soft reset...
racerx_ At you it is established SuperSid? At the some people passwords are lost, at the some people are not present. It can it is guilty?
I Am sorry for my English
no, i haven't super-cid'd... is that the cause of the problem?
I have the same problem with ADW's ROM. He suggested that I only soft reset by pressing the powerbutton and really close down the device. I now use this procedure always for a softreset and since then I did not lose any passwords or pairing info.
I agree with most of you that there is no sense of upgrading ROMs with every build release if we don't solve this BIG bug. We are releasing a rom every week but all of them buggy.
In my case I've seen that even only using PowerDown Button reseting, somehow registry corruption happens.
I don't know if someone could fix this, but in case someone does and does need some help, count with me.
I manage to port the old good xip section...
So i open a new thread to deal with that.
http://forum.xda-developers.com/showthread.php?t=342269
For now we have to build all the new rom's with that rom folder in kitchen's.
Thank's
racerx_ You have not understood - at whom is SuperSid at that passwords are lost. Who does not have SuperSid that has no such problem.
colorist said:
racerx_ You have not understood - at whom is SuperSid at that passwords are lost. Who does not have SuperSid that has no such problem.
Click to expand...
Click to collapse
Hi all,
like racerx_ I have tried many ROM and never I've lost my settings too
my device isn't SuperCid too, pheraps you must look at what SuperCid-ing a device do..
Hope this help and excuse for my english.
Bye
got it... thanks!

Tab and WiFi

I'm currently using Schap's 3.54b rom. Since flashing my WiFi and my Tab button stopped working. The WiFi says it's connected to my router but IE won't bring up a page, it just says "Locating". As far as the Tab button, I've changed the keyboard setting to "Cingular" in the Advanced Configuration App. I've looked through this forum for a few days and haven't came up with anything.. I don't know if I just don't the technical lingo and missed the info. I've posted about the keys being incorrect in the 3.54b Thread but no one responded.
No idea on the Wifi, but can you type a question mark (?) on the keyboard? If not, search for "8525 keyboard fix" cab.
Why not flash to the new Schap's 4.31 rom?
cirial said:
Why not flash to the new Schap's 4.31 rom?
Click to expand...
Click to collapse
I was going to try another rom, just didn't know if there was a fix.

WLAN/WIFI stay off on Schap's rom 4.31

Hi,
i got a problem with my pda whan i want to use wifi...I can' activate it :
with com manager i click on WLAN, WLAN come gray while pda is calculating and wifi come back to off ;o( same result in setting/wifi...
Did someone know this problem, a way to resolve it or a way to diagnostic it ?
Hermes history :
- originaly SPV M3100 orange with wm5 rom
- official update to wm6
- flash and unlocking to schap's wm6 pro 3.57a (1st wifi problem)
- flash to schap's wm6 pro 4.31 (same problem)
Thanks for your help
TSyst.
open you registry editor.goto HKLM>Software>HTC>CommManager>WLAN>DeviceName
open it up and make sure the end of the command is "\TIACXWLN1"
hope this helps
Hi,
tks for answer.
The regkey is in a register base and with the good end of cmd (\TIACXWLN1),
so...another idea ;o)
Tks
TSyst
Check the WAN card still has a MAC address listed, I had an issue where it dissapeared and had to hack the Rom to get it back, if that's the case have a search on here for the thread which had all the instructions to resolve it.
Hi,
How can i check if the WAN card still has a MAC address somewhere ?
Tks
hi,
following your idea of hacking rom (markafreeman) i've found this thread in the upgradinf forum : http://forum.xda-developers.com/showthread.php?t=322225
tks for help, i'll ask some details in this thread and try to apply it on my device, but it's not really clear for my poor english and a newbies like me...so...hopping evrything 'll go in the good way and to not definitivly crash my hermes
tks for idea
Tsyst.
problem resolved
Tks markafreeman, following your idea i have read the post listed above and resolved my problem Wlan is now active...
Great tks for your answer
TSyst.

Categories

Resources