I have tried all of the new WM6 rom's with "black" look and in most of them I get that the comm manager font is all messed up destroying the nice original look.
Has anyone experienced this problem?
please take a look at the attached file.
Thanks for your help
durius said:
I have tried all of the new WM6 rom's with "black" look and in most of them I get that the comm manager font is all messed up destroying the nice original look.
Has anyone experienced this problem?
please take a look at the attached file.
Thanks for your help
Click to expand...
Click to collapse
Make sure your fonts size is set to medium
Hi jmermel,
Thanks for the reply.
I've checked ad the font is already set to medium.
The problem must be somewhere else...
The same thing has happened to me many times with different roms. In fact it even changed back to normal with a soft reset on some of them.
Hi,
have you the cab file of this comm manager?
Thank's
BYE, Bobo
Bobo Xni said:
Hi,
have you the cab file of this comm manager?
Thank's
BYE, Bobo
Click to expand...
Click to collapse
Hi Bobo,
No i don't.
It's included in the rom but I don't know how to extract it from there...
Sorry
durius said:
Hi Bobo,
No i don't.
It's included in the rom but I don't know how to extract it from there...
Sorry
Click to expand...
Click to collapse
Hi,
No prob.... if I find the cab file i have the possibility to verify this problem but i'm looking for obtain it....
BYE, Bobo
Bobo Xni said:
Hi,
No prob.... if I find the cab file i have the possibility to verify this problem but i'm looking for obtain it....
BYE, Bobo
Click to expand...
Click to collapse
Just to make it clear, this problem also happened with other comm managers like the one from HTC Kaiser (10 button) or the one with 8 button... so maybe this has to do with some font that is changed by some piece of software.
Just guessing...
No more ideas about this...?
durius said:
No more ideas about this...?
Click to expand...
Click to collapse
I have notice this problem too on many ROMs, I think that the issue comes from your today theme or do you have Wheather Panel installed on your device ?
Each time I install this soft, it happens.
Funny- I use weatherpanel too!
me too...I will try to uninstall and see what happpens
No doubt...That's WeatherPanel causing this problem.
Would it be possible to get any workaround???
Go to the weatherpanel folder in the theme folder and remove/rename the 2 TTF files (font files) that are there.
After that softreset and commmanager should be normal again...
Related
Is it just me or is there no sound when you click the Start button on the Dopod WM6 ROM. I was just used to it in WM5. Have I done something wrong ?
jefalijas said:
Is it just me or is there no sound when you click the Start button on the Dopod WM6 ROM. I was just used to it in WM5. Have I done something wrong ?
Click to expand...
Click to collapse
is sound activ?
Fro sammy_deluxe
hello,
Use this fix i found it on this forum and after all are ok.
Private69.
@+++
Yes, I can force sound for each 'Screen taps' under Start > Settings > Sounds & Notifications. But I do not want sound for each screen tap. I am completely lost on this one. Does anyone else get sound when clicking on Start ? Is it the ROM or is it just me ?
For jefalijas
Hello,
I post the correctif cab :Fix_WM6_Sounds.CAB
Enjoy.
Private69.
@+++
Thanks, work perfect now
Nice, I like this better than the original WM5 sound on the Treo.
private69 said:
hello,
Use this fix i found it on this forum and after all are ok.
Private69.
@+++
Click to expand...
Click to collapse
I used this cab, but it didn't work for me. Now I want to uninstall it, but it does not sow up in Uninstall programs. Which files should i delete to uninstall this?
Thanks!
How to uninstall it.
This cab file messed the icons on my start menu and ilauncher completely. Please post which Registry values does it change, so I could disable it if I need to. I cant find a way to uninstall it. If there is a way, please post it.
anyone ever figure out exactly what the registry edit was that this was doing?
bump anyone?
Yeah, I used this on my HTC Touch Cruise, and now I'm stuck with the menu sounds -- which are fine, but I realised on hearing them constantly why they were disabled.
I've poked around the registry, but I can't find an obvious place to change this back. So if anyone can tell me how to undo this hack, I'd be most grateful.
Thanks!
How To install
Could you please advice how to install this cab on my device? I have never installed this kind of a solution so please do advice
smittyofdhs said:
If you want to remove this cab from your phone, in the registry, go to HKLM\Snd\Event.Scheme\.AllSounds and remove menusel and menupop from that key. soft reset, done with menu noise.
Click to expand...
Click to collapse
http://www.4winmobile.com/forums/hermes-black-rom-support/11594-phone-pad-vibrate-how-remove.html
Is there a way i can get the black theme? like the one that comes with the Touch and Titan II ?
Also i would like to replace the green-colored skin affiliated with the comm manager and SIM Pin entry page and Dialer. Any ideas?
I don't want to use By_Boto_XDA-Developers_HTC_Touch_CommManager.cab because in the thread people say it makes the startup alot slwoer...
I would like to keep this ROM and only install cabs or edit registry.
thanks...
EDIT*
Ok ive the black theme form here http://rs54.rapidshare.com/files/36282384/Htc_default.tsk
but the green-colored skin affiliated with the comm manager and SIM Pin entry page and Dialer are all still green and don't go at all with the black.
me_ said:
Is there a way i can get the black theme? like the one that comes with the Touch and Titan II ?
Also i would like to replace the green-colored skin affiliated with the comm manager and SIM Pin entry page and Dialer. Any ideas?
Click to expand...
Click to collapse
CommManager see this post
wizard reTouched Dialerskin see here (it's attached to the first post) - this will also change your Dialpad, not only Pin-entering page:
View attachment 53422
thank you, my friend.
Update:
The Wifi button on the Comm manager doesnt work....any solutions or alternatives?
thanks.
me_ said:
The Wifi button on the Comm manager doesnt work....any solutions or alternatives?
Click to expand...
Click to collapse
In the new comm-manger you can sovle this issue by deleting this regkey:
HKLM\Software\HTC\CommManager\WLAN
Maybe it works also in this case ?
petervbeck said:
In the new comm-manger you can sovle this issue by deleting this regkey:
HKLM\Software\HTC\CommManager\WLAN
Maybe it works also in this case ?
Click to expand...
Click to collapse
working great now. Thanks
You can also change the value on hklm/software/htc/commanager/wlan to TNETWLN1
Hi
What files do I need to install TouchFlo on the original WM6 ROM?
Thanx
costasx said:
What files do I need to install TouchFlo on the original WM6 ROM?
Click to expand...
Click to collapse
You can't install TouchFlo by cab, it has be cooked in.... if you don't believe - when you do a search you won't hear another answer...
link..
http://forum.xda-developers.com/showthread.php?t=333513 touch flo ..
You can install touch flo but your device must be made ready to run bioscroll.
lepsyfou said:
http://forum.xda-developers.com/showthread.php?t=333513 touch flo ..
Click to expand...
Click to collapse
lepsyfou said:
http://forum.xda-developers.com/showthread.php?t=333513 touch flo ..
Click to expand...
Click to collapse
and this is working just as well as the real cooked-in cube ? i can't believe... did you ever tried yourself ?
edit: aha, Nikmel answered already my question
new version and 3d here:
http://forum.xda-developers.com/showthread.php?t=373677
Thanks Ervius,
downloading...
pampito said:
Thanks Ervius,
downloading...
Click to expand...
Click to collapse
and....
if you find other bugs, I try to solve them,
but the ones by HTC Home was terrible..... 6 or 7 mb in memory waste all....
hopeing they' ll solve this big iusse in a next release.....
....... It is not perfect ... he does not make the coffee! I want a rom which prepares the coffee! ERVIUS thanks
marco3254 said:
....... It is not perfect ... he does not make the coffee! I want a rom which prepares the coffee! ERVIUS thanks
Click to expand...
Click to collapse
I'm juts preparing an utility fot that....
wait...
I've just installed it, everything works fine except the Touchpad, it doesn't show up when I change from keyboard to phonepad. I didn't install anything on the PDA yet.
hi ervius i installed your last relase ican say tha previus was better this cometimes ave lock and i lose all controll of my device need soft reset
sip change don't work with pcmkeyboard also if i put the dll. into windows
marcosorano said:
hi ervius i installed your last relase ican say tha previus was better this cometimes ave lock and i lose all controll of my device need soft reset
sip change don't work with pcmkeyboard also if i put the dll. into windows
Click to expand...
Click to collapse
I had a device lock too while using the TouchFlo and needed to reset.
marty_73 said:
I had a device lock too while using the TouchFlo and needed to reset.
Click to expand...
Click to collapse
never seen this problem, for keypad, I made other hard reset and now works, this one is really a mistery for me....
no solution in mind for it...
Hi ervius... where can I find some more info about sdconfig? I'd like to know how to configure it, if I can install apps into main memory too, modify settings, add registry keys...
GDT said:
Hi ervius... where can I find some more info about sdconfig? I'd like to know how to configure it, if I can install apps into main memory too, modify settings, add registry keys...
Click to expand...
Click to collapse
there is a package somewhere, about cabs.... only insert into sdconfig\ folder into storage card, for registry tweak, you must learn about provxml files...
bye!!!
ervius said:
there is a package somewhere, about cabs.... only insert into sdconfig\ folder into storage card, for registry tweak, you must learn about provxml files...
bye!!!
Click to expand...
Click to collapse
And where will the cabs be installed? Into SD Card, into main memory or I can choose it?
GDT said:
And where will the cabs be installed? Into SD Card, into main memory or I can choose it?
Click to expand...
Click to collapse
there is apposite 3d about
http://forum.xda-developers.com/showthread.php?t=372309
Another great work, sdconfig is a very great idea. I have flashed and all work fine but I have a little question: with your weather configurator is possible change between Celsius and Farenhait ? It's necessary for MeteoRay.
Thanks.
mar_60 said:
Another great work, sdconfig is a very great idea. I have flashed and all work fine but I have a little question: with your weather configurator is possible change between Celsius and Farenhait ? It's necessary for MeteoRay.
Thanks.
Click to expand...
Click to collapse
no, only celsius, but we can update it, only, tel me what uou need!!
bye!
MeteoRay software display properly temperature only with Fahrenheit grads in settings otherwise it display temperature in Fahrenheit instead Celsius.
Ciao.
chiamata vocale
I have not "chiamata vocale"
ABOUT THE PHONEPAD BUG: I did a hard reset, the Phonepad worked for a few minutes, then it stopped to work after a soft reset, maybe the bug appears after you get into the SIP properties.
Hi, can someone tell me which is the plugin (and where I can take it) that add the thin line of the battery status on the top of the screen.
Thanks
Bye
actarus999 said:
Hi, can someone tell me which is the plugin (and where I can take it) that add the thin line of the battery status on the top of the screen.
Thanks
Bye
Click to expand...
Click to collapse
batterygauge.... here:
Hello,
This new rom i780MSHC3 includes a new "mouse" driver that supports and press and hold function that simulates the right click menus, etc. My question is that if someone could extract the new mouse drivers and make a cab file or something?
This because i have a portuguese rom with specific service provider settings and utilities which, for now i dont want to loose. Also the rom i have supports the hard reset function which is very important in case of a disaster and is something i definitely don't want to loose.
Thanks,
OliveiraJMR
Joao Oliveira said:
Hello,
This new rom i780MSHC3 includes a new "mouse" driver that supports and press and hold function that simulates the right click menus, etc. My question is that if someone could extract the new mouse drivers and make a cab file or something?
This because i have a portuguese rom with specific service provider settings and utilities which, for now i dont want to loose. Also the rom i have supports the hard reset function which is very important in case of a disaster and is something i definitely don't want to loose.
Thanks,
OliveiraJMR
Click to expand...
Click to collapse
Hi. I´m in the same situation has Joao Oliveira.
Anyone could make a cab with the new mouse driver?
thanks a lot
Nuno
Lets keep trying
Come on people...
Can someone please try to extract the new mouse that has the new feature of press and holding.....
lets keep this thread alive
Joao Oliveira.
Yes, this would be usefull to many people out there
Best regards,
LoGiKZ
bump please
some one who already has a dumped rom .. plz create a cab with the new mouse files
thanks
i guess no one will do it...
can anyone help us to get this driver ?
Hello,
Any news on this??????
Still waitnig?
REaly no one has idea how to do that???
regards,
MB
dzikunek said:
Still waitnig?
REaly no one has idea how to do that???
regards,
MB
Click to expand...
Click to collapse
Try this.
Take the new mouse driver (mouse.dll), rename it as mouse-new.dll and put it in the \windows directory.
Use a registry editor and change all the mouse.dll values in mouse-new.dll, then softreset the device and see what happens.
Samsung SGH-I780 - i780MSHC3 mouse driver? Reply to Thread
The Solutor said:
Try this.
Take the new mouse driver (mouse.dll),
Click to expand...
Click to collapse
but where can i get it?
I've tried to use kitchen with rom file but I think I am not enough educated to use this tool.
hope you'll help... many people here will be happy
regards,
dzikunek said:
but where can i get it?
I've tried to use kitchen with rom file but I think I am not enough educated to use this tool.
hope you'll help... many people here will be happy
regards,
Click to expand...
Click to collapse
This is from the latest rom
The Solutor said:
Try this.
Use a registry editor and change all the mouse.dll values in mouse-new.dll, then softreset the device and see what happens.
Click to expand...
Click to collapse
Another "success-breaker":
I am using Mobile Registry Editor, and
1. I can find only touch.dll i HKLM\HARDWARE\DEVICEMAP\TOUCH. I can't find mouse.dll in the registry at all.
2. Any way: I can't make changes there... "Access denied message apears.."
Please Solutor! Don't give me up!
dzikunek said:
Another "success-breaker":
I am using Mobile Registry Editor, and
1. I can find only touch.dll i HKLM\HARDWARE\DEVICEMAP\TOUCH. I can't find mouse.dll in the registry at all.
2. Any way: I can't make changes there... "Access denied message apears.."
Please Solutor! Don't give me up!
Click to expand...
Click to collapse
I fixed #2 using Resco, but i still cannot find mouse.dll on my device
Another point:
3. I took touch.dll from rom i780MSHC3_UKENG_PDA and when I place it into device my touchpad dies at all (both stylus and touchpad)
regards,
realy?
realy no one can help?
Solutor, even you?
reg.
dzikunek said:
realy no one can help?
Solutor, even you?
reg.
Click to expand...
Click to collapse
I' have posted a coocked rom with the new and old drivers but seem tath noone has tried to see if it helps.
http://forum.xda-developers.com/showpost.php?p=2772920&postcount=55
The rom is an italian one, but if it works I can do WWE olmouse edition, very quickly.
mouse.dll
But any way, what if I have no mouse.dll on my ROM?
There is nothing to change, except touch.dll...
I am wondering if it is possible at all to change the driver without changing all ROM, what you think Solutor?
regards,
how do i install this mouse driver on my Touch Pro and Samsung i730 with wm6.
bump please......
hi, i'm looking for some help.i overide my origional shellres.192.dll file.is it possible someone can copy it from their phone and attach it here for me! much appriciated. next time i would backup before doing any mods...
triniboi said:
hi, i'm looking for some help.i overide my origional shellres.192.dll file.is it possible someone can copy it from their phone and attach it here for me! much appriciated. next time i would backup before doing any mods...
Click to expand...
Click to collapse
If you go into windows and delete the file and then soft reset it gets replaced with an original from the root of the ROM.
grzegorz10 said:
If you go into windows and delete the file and then soft reset it gets replaced with an original from the root of the ROM.
Click to expand...
Click to collapse
i tried that but it seems the file cannot be deleted cause its a rom file.i used recso explorer and total commander same message! any other ideas? i'm able to replace the file with another one which i did to change the cursor icon forgeting to backup the origional.now i want to switch back to the origional and can't cause i no longer have the file!
triniboi said:
i tried that but it seems the file cannot be deleted cause its a rom file.i used recso explorer and total commander same message! any other ideas? i'm able to replace the file with another one which i did to change the cursor icon forgeting to backup the origional.now i want to switch back to the origional and can't cause i no longer have the file!
Click to expand...
Click to collapse
You may not like it but a hard reset would be your option. There may be differences with other peoples ROM which could cause more problems than you want.
triniboi said:
hi, i'm looking for some help.i overide my origional shellres.192.dll file.is it possible someone can copy it from their phone and attach it here for me! much appriciated. next time i would backup before doing any mods...
Click to expand...
Click to collapse
try this and good luck
willwmj said:
try this and good luck
Click to expand...
Click to collapse
hey thanks allot....but i found that file on the forum already it does not work, for my hd it was allot larger than that! was this extracted from your hd?
anyone else can help me without me having to hard reset my hd? the only thing i want is the origional wait cursor file...help!
triniboi said:
anyone else can help me without me having to hard reset my hd? the only thing i want is the origional wait cursor file...help!
Click to expand...
Click to collapse
what rom are you using? i.e. is it wm6.1 or is wm6.5 based?
I've got stock taskbar icons cab install for both wm6.1 and wm6.5 which will revert your device back to original state i.e. the default taskbar icons saving you the hassel of not hard reseting! is this any good to you? if so I can upload here or give you download link!
Please post 6.5 original ones. Thanks.
jpl69 said:
Please post 6.5 original ones. Thanks.
Click to expand...
Click to collapse
Ok here you go find attched cab You may need to install sdkcerts.cab first and then install the wm6.5 taskbar cab!
gfreek said:
what rom are you using? i.e. is it wm6.1 or is wm6.5 based?
I've got stock taskbar icons cab install for both wm6.1 and wm6.5 which will revert your device back to original state i.e. the default taskbar icons saving you the hassel of not hard reseting! is this any good to you? if so I can upload here or give you download link!
Click to expand...
Click to collapse
ROM version: 1.14.405.3 (22273) WWE wm6.1...would it be possible to have the shellres.192.dll file only?
All i'm trying to achieve is to get back the origional wait cursor and the start menu icon!the shellres.192.dll file i installed over the origional had those two items modified.everything else is fine just those two items i want to get back, thats why i need the origional shellres.192.dll file.
gfreek said:
Ok here you go find attched cab You may need to install sdkcerts.cab first and then install the wm6.5 taskbar cab!
Click to expand...
Click to collapse
Many thanks, you'r very kind.
triniboi said:
ROM version: 1.14.405.3 (22273) WWE wm6.1...would it be possible to have the shellres.192.dll file only?
Click to expand...
Click to collapse
Here you go! just unzip attached file and copy over to windows folder using either resco file explorer or total commander!
gfreek said:
Here you go! just unzip attached file and copy over to windows folder using either resco file explorer or total commander!
Click to expand...
Click to collapse
thanks allot! you just made my day...haha well i got back my origonal wait cursor but no start menu icon.well mabye i would search the forum and put the htc alrernative icon! thanks again..........
thaks......................................
You can always rename the file and put .bak at the end.