dopod chinese -- to english--upgrade from p3600 - P3600 ROM Development

Hello guys, I am in Taipei now and I found the new Dopod with 256 megs internal memory same size screen but I have been told that it cannot be flashed and cannot be unlocked.. any suggestions? I do have the htc p3600 is this worthed to upgrade.
Thanks for any suggestions.

256 megs internal memory
that's unbeliveable. or it is storage memory?

itlinux said:
Hello guys, I am in Taipei now and I found the new Dopod with 256 megs internal memory same size screen but I have been told that it cannot be flashed and cannot be unlocked.. any suggestions? I do have the htc p3600 is this worthed to upgrade.
Thanks for any suggestions.
Click to expand...
Click to collapse
For people who are currently using CHT9100, P3600 or D810,
I suggest them to keep using~
it's not very necessary to change from CHT9100 to CHT9110.
But if you are planning to buy Trinity
or your Trinity is broken or got lost,
you are suggested to buy CHT9110
for the following two reasons.
1) CPU speed is promoted by 25%~comparing under the same brand.
2) The flash ROM is doubled~total 256MB, about 168MB available for storage.
That means you don't have to worry about
not enough space for installing progarms in the future.

Related

Most avaible RAM

Hello dear Community, first i am from Germany, so excuse my English Mistakes.
My Problem, to get Navigon Mobile Navigator to run you need for the Germany Map min ca 27MB Ram avaible, to run the Europe Map ca 35 MB Ram.
NOTE: After Installing and Hard Reset i did the Software REset, to prevent the Provider Software to be installed.
With Vodafone Aku 2.2 i get about 29 MB free RAM
With T-Mobile Aku 3.3(or 3.0 i don´t exactly know which it was) i get about 32 MB avaible RAM,
With a WM6 Version i get about 25 MB avaible RAM, that definetly to less, i tried but with the WM 6 version i got a instantly Crash...
So which is a actual AKU (no matter if WM5 or 6) which i get the most avaible RAM?
Next Question with the T-Mobile AKU i got only Vodafone LIVE! Wap in text Based, but with the newest Vodafon AKU i got graphic WAP, the Config is correct i checked it. Is there a driver to get it to work?
THX
Unfortunately, no available ROM can provide you with greater than 32MB. One of the major disadantages of the Universal.
---
Hi! Could you please confirm in which ROM are 32Mb RAM avaiable? T-Mob AKU 3.3 or 3.0?
unapproachable2kx said:
Hi! Could you please confirm in which ROM are 32Mb RAM avaiable? T-Mob AKU 3.3 or 3.0?
Click to expand...
Click to collapse
The Max RAM that I ever seen in a UNIVERSAL ROM was some 31.85MB.
You may have look to the New German WM5 AKU 3.3 ROM which provides one of the highest RAM. Further more it is one of the best/stable ROM that I have seen.
http://www.t-mobile.de/business/downloads/start/?area=34&handy=268&product=27000482
Click on "Geräte-Software" on the left side and soon you will see the "Software Update AKU 3.3 08/2007"

HTC Universal Flash ROM Memory Upgrade

Since Mamaich has been able to make our universals capable of upgrading the ram memory to 128MB, is there any chance for upgrading the Flash ROM as well (to 256MB or more)?
Would really like to hear whether anyone is trying on this?
Cheers.
mctoey said:
Since Mamaich has been able to make our universals capable of upgrading the ram memory to 128MB, is there any chance for upgrading the Flash ROM as well (to 256MB or more)?
Would really like to hear whether anyone is trying on this?
Cheers.
Click to expand...
Click to collapse
There is no way!
The MDA has no place to add 4 Memory-Devices!
The other way is to install 1GBit Memory-Chips. But this does not exist (which are compatible to the pinning and funktion of the original chips)!
So the limit is 128MByte.
The PXA270 can address up to 1GByte. But the MDA can not use it.
Regards
silto

info patch sdhc for universal (qtek 9000)

hi to everybody and you excuse my non perfect nglese.
I would want to ask a favor.
it would serve me the patch for the cards of memory sdhc for my universal (alias qtek 9000).am I more than one of it by chance?
would you send me the correct file for my universal?I have seen that I am a pò and not sò of it which to use.(or you write the link.).thanks to everybody
I forgot, I use mobile windows 5
This is the cab.
Testet on HTC Universal with WM5 and WM6, Fujitsu-Siemens PoketLoxx N560 with WM5 and Sprint IP-w830 with WM5.
It is testet with a 16G SDHC card.
Have fun.
sdhc problem
Hello this site is fantastic! Are hours that I have lost my updating qtek 9000!
THANKS TO ALL YOU!
But by neophyte I have a problem: I have a Scan Disk Ultra 4gb sdhc I downloaded your file sdhc.cab but I really do not know what to do now!
Please help me
You are great
put the cab on ya device (microsoft active sync) then run it from the
file explorer
YOU are FANTASTIC!
Another fast question: where to put the file pbar15.exe?
Thank you and good evening to all
problem 4bg not 8
hi, I have a problem.I have installed sdhc.cab, but my universal reads 4 gb instead the memory it is from 8.
hi, please help me i have a memory card A-Data turbo sdhc 8 Gb for my i-mate with wm 5, i have download sdhc.cab, but now i read only 3 Gb, how I can make in order to resolve the problem? thank for answers me .....
hi there, what you need is SDHC777.cab also known as sdhcv2. here is a link to it but i think its been renamed
http://forum.xda-developers.com/attachment.php?attachmentid=72806&d=1204022607
try it worked for me
problem 8 gb universal
hi, unfortunately, not function with wm5 aku 2.
I have tried her all but not và, at times it goes out me "any installed card."
the connection fà to unload sdhc.cab and he/she reads me the memory from 3.5gb instead of 8
thanks very much, i think that i change WM5 in WM6, please can you give a link where download WM6 version italiana???
You are OFF TOPIC here.
However, you can try here
highc said:
This is the cab.
Testet on HTC Universal with WM5 and WM6, Fujitsu-Siemens PoketLoxx N560 with WM5 and Sprint IP-w830 with WM5.
It is testet with a 16G SDHC card.
Have fun.
Click to expand...
Click to collapse
thanks dude!!
workin
Hi...
Tried them both... and no one is working =S
Only recognizes 3476 MB of my 8GB Sandisk MicroSDHC
Could u help me?
I'm using a Qtek 9000 with WM 5.0.

Asus P535 Rom support 128MB Ram

We found the asus P535 Rom form Chinese Web which support
128MB ram, but this rom is S. chinese, how can I change it to English ? Thanks
http://www.pdaclan.com/attachment.php?aid=25392&k=b348426bce0dac8897a5b11b24b38dfa&t=1211779651
Have you got 128mb ram on P535 ? Did you upgraded it? How? From where? Which type of chip? I'm interested in it too !!!
GorTen said:
Have you got 128mb ram on P535 ? Did you upgraded it? How? From where? Which type of chip? I'm interested in it too !!!
Click to expand...
Click to collapse
I upgraded to 128mb ram already, it's upgraded in Shenzhen, China, cost only RMB150,
the machine is working very smooth now.
It done at thailand tribes (PDAMobiz.com).
I order ram from Shenzhen, China about $4USD/pice.
http://www.pdamobiz.com/forum/forum_posts.asp?TID=142018&PN=1&TPN=1
http://pdamobiz.com/forum/forum_posts.asp?TID=137312&PN=1
IamX said:
It done at thailand tribes (PDAMobiz.com).
I order ram from Shenzhen, China about $4USD/pice.
http://www.pdamobiz.com/forum/forum_posts.asp?TID=142018&PN=1&TPN=1
http://pdamobiz.com/forum/forum_posts.asp?TID=137312&PN=1
Click to expand...
Click to collapse
Is there any site for ram upgrade for Asus P525
Premananda_laishram said:
Is there any site for ram upgrade for Asus P525
Click to expand...
Click to collapse
P525 same P535
P525 original ram is samsung.
It can replace new ram(128M) same P535(infineon).
http://www.pdamobiz.com/forum/forum_posts.asp?TID=140012&PN=1&TPN=3#1596604
the new ram model is HYB25L512160AC-7.5 and it is on sale at ebay, i found it by seaching for HYB25L512160 at ebay.
and we will need to instal the p750 firmware that suports 128Mb
but i am going to wait and how it works for the other people and how many bricked phones we will see, because it looks very risky, so i will also need a very good tutorial to do it to my P535
so far i only found this and the pics on the links from the posts above:
1) You have to change RAM chips (and loose the warranty)
2) Download the firmware which supports 112 or 128 Mb, unpack and put it to microSD (not microSDHC!) card.
3) Insert the card into Your device.
4) Reboot the device in bootblock mode, and wait while firmware updates
the hard part is obviously the first step
where can I upgrade my asus p535 RAM to 128MB
Hi
any one can tell me where can I upgrade my P535 RAM to 128 MB ?
I will be in Thai 2 weeks from now....
hi
Upgrade (RAM) 128 Мб in to 525,535,750
use google translator for read this post manualy instruction from soldering at home
thanks
pak1to said:
hi
Upgrade (RAM) 128 Мб in to 525,535,750
use google translator for read this post manualy instruction from soldering at home
Click to expand...
Click to collapse
thanks mate I'll try it
blauliry said:
thanks mate I'll try it
Click to expand...
Click to collapse
You'll see the diferent for sure

HP IPAQ H4100 series (4150), wm6 upgrade question

Hi.
Im intrested if is possible to upgrade h4100 with wm6 OS.
Now is default w2003. If is, can someone send link or something tutorial how to do it...
THX
I found answer....
The H4150 hasn't enough memory to install WM5/6 on it, at least 64MB ROM is needed, your device only has the following:
ROM capacity: 32 MB (accessible: 2.8MB)
RAM capacity: 64 MB (accessible: 55MB)
There isn't even a WM2003SE upgrade available for your device so you're stuck with WM2003.
wudoo2002 said:
I found answer....
The H4150 hasn't enough memory to install WM5/6 on it, at least 64MB ROM is needed, your device only has the following:
ROM capacity: 32 MB (accessible: 2.8MB)
RAM capacity: 64 MB (accessible: 55MB)
There isn't even a WM2003SE upgrade available for your device so you're stuck with WM2003.
Click to expand...
Click to collapse
It is NOT the truth. A WM5 demo machine is actually built with 32MB ROM.
It is just something for HP to defense.
Sadly this is one of the best machine in terms of hardware.
hopefully if someone can put linux on it.
Any updates on this?? I also have a 4100 series Ipaq...(4155) that I'd like to upgrade.
Thanks,
Rudi
sorry to all
but i bel that i had seen wm5 available for hp 4150 on this page (not free)but a long time ago
http://h20000.www2.hp.com/bizsuppor...esId=349042&swLang=8&taskId=135&swEnvOID=1087
and now they have changed that page
Any news or solutions?
I have an ipaq 4155 as well and wanted to know if anyone cooked a 5.0 or 6.1 rom for it?
Nope stuck to the end
Linux on iPAQ
You can try this .angstrom-distribution.org/2007-12-images-h2200-h3900-h4000-hx4700 if you don't mind using linux on iPAQ.
Sorry the link is not working. I have got also h4100, and want to try something new on it
my fault. just add www.
It's pity that hp 4100 is dead... But the last chance is to use sd card as system memory...

Categories

Resources