hello evryone this is my 2nd htc device and I noticed that one you upgraded to wm6 the dial up connection from a pc to the htc over bluetooth is no longer possible.
does any one know if there is a such wm6 that would allow the dial-up over bluetooth.
let me and please if the language can be in english it would be better.
thanks
i think i didnt get the idea of this post when i read the title
http://forum.xda-developers.com/showthread.php?t=332360
its about sharing internet over wifi
i just hope they mean from your 3g connection , i will go and try it out
will reply later
Related
It wanted that you helped me, I have a 9600 HTC qtek 9600, I connect wifi and it detects networks to me but however when I give him to connect is connected to me through GPRS with which they receive to me, since I do so that it does not connect by GPRS and am free?
i have windows mobile 6 with custel v2.0.2
thanks
3 banannas emu monkey wifi gprs monkey
like adjustment the monkey of wifi?
alvarogemelo said:
It wanted that you helped me, I have a 9600 HTC qtek 9600, I connect wifi and it detects networks to me but however when I give him to connect is connected to me through GPRS with which they receive to me, since I do so that it does not connect by GPRS and am free?
i have windows mobile 6 with custel v2.0.2
thanks
Click to expand...
Click to collapse
Damn..your English is bad.. how old are you, you sound like a 6 year old disabled..
Moderation - Bram87 this kind of language is offensive and un-necessary. We are a helping community here, so more tolerance please!
sorry,I´m spanish and the traductions is by google
help me please
type in spanish, let someone that speaks spanish on the forum translate it because that was horrible and i dont know what the hell the problem is...
Ok, I think I understood the question (because I speak spanish also and I have a similar problem). The problem is that when WiFi is working (and everything OK:IP address, etc) and you start PIE, then it tries to enable GPRS (or HSDPA)... I tried all possible combinations (Network Card connects Internet or Work...) and PIE always tries to connect through GPRS (or HSPDA).
Am I missing any setting?
Is it possible to setup PIE with WiFi and MMS with GPRS at the same time?
PD. Hope my english is not so broken
Try to look under Settings/Connections/Advanced...the Select Networks options...under Programs that automatically connet to a private network should connect using...choose "My Work Network"
It works for me...
Regards,
Primoz
It somehow work.. I have to repeat that several times and then it works...
Anyway, Is there any way to fix PIE with WiFi and the other things with GPRS or we have to change the settings everytime (really annoying)?
disable cing proxy
hello to all!
sorry for openning new thread but i had bad days since i bought the jasjam
many rom comes out every rom very good and fast will lot of feature
but what about the wifi?
the wifi is very sucks,i cant find nothing
i seat in my work next to wifi place and my jasjam somtimes find the wifi somtimes no
even when it finds the net it disconnect after minute
do i need special driver ?
is there rom with good wifi?
plz help ?
or maybe the jasjam wifi very bad we need to seat very neer to the net?
Try Start > Settings > Connections tab > Wireless LAN > Power Mode and turn the Performance up to boost the wireless power.
hey guys. sorry for reviving this. i have been looking for a way to improve the wifi. i am aware of the power settings as posted above but i was wondering if there was any way at all to improve it any more.
we have 3 computers in the house running wifi from an access point. a desktop with a card, a laptop with a pcmcia card and a laptop with builtin wifi. it all works fine. both my dad and i have hermes devices (a jasjam and a dopod 838pro) but the wifi sucks on both of them.
im guessing we just have to put up with it? any help would be good though
The Wifi will never be great on them, they would have to be twice the size to have the correct sized antenna and it's only though trickery that the ones they have work at all.
You can try the above mentioned power setting for wifi on the hermes, or try getting a n-draft MiMO Access Point as these have really good range bosting.
bubu23 said:
hello to all!
sorry for openning new thread but i had bad days since i bought the jasjam
many rom comes out every rom very good and fast will lot of feature
but what about the wifi?
the wifi is very sucks,i cant find nothing
i seat in my work next to wifi place and my jasjam somtimes find the wifi somtimes no
even when it finds the net it disconnect after minute
do i need special driver ?
is there rom with good wifi?
plz help ?
or maybe the jasjam wifi very bad we need to seat very neer to the net?
Click to expand...
Click to collapse
right after i installed the new rom,i was having issues with the wifi in the sense that it couldn't find any wireless networks.just did a soft reset and it's been fine since. give it a try, might work.
Hi,
I just upgraded my Hermes ATT 8525 from WM5 to the following WM6 version which I downloaded off of rapidshare site:
4. WM6 Cingular USA version (same as the official but cingular customized and radio version 1.48) thanx madcap180
Everything is working great, the upgrade was smooth and I was able to get all my data back and all that except for the WIFI connection.
I am able to connect to my Home Wireless Secured Network (SSID), and it shows that it is connected and has almost all the green bars showing excellent signal quality, but when I try to use Messenger or Internet explorer, it doesnt work. I am not sure why? Is it trying to connect using GPRS or cingulars Internet connection? If so, how do I fix it so that It connects using my home wireless connection. I do not subscribe to ATT/Cingulars Internet data plan etc,...
Any help will be greatly appreciated.... thanks
You should read the thread for this rom and ask your question there:
http://forum.xda-developers.com/showthread.php?t=317339
Thank you much! I posted my question under that post.....
Hi there all you genius , any body came across these application, or can be develop ? .How can I make my Tytn a pc-less Skype or SIP phone with out using WIFi or my pc, I just want to connect my Tytn by a USB to Ethernet converter, strait to my network router.Thanks for your help.
Any answers?
Hey guys, I just give you some challenge away from the boring roms ,and I don't have any answers, thanks.
I don't get the point ?!
Why on earth use a cable and be PC dependand as it is allready possible to connect to any SIP through wifi, 3G, ...
fun_key said:
I don't get the point ?!
Why on earth use a cable and be PC dependand as it is allready possible to connect to any SIP through wifi, 3G, ...
Click to expand...
Click to collapse
thanks for the reply , I knew some body will ask about this , the point is not to use WIFI or 3G, because they use massive battery power and also, that extremely annoying bad link or connection ,you can not have a decent conversation yet, trough this wireless media.
I bought the NEW Hd2 . before it I had six other PPC they were working fine. But now with this precious instrument I'm very frustrated.
A. The SKYPE SHOWS All my friends but not connecting to the network for cheting. EVEN calling by dialing is impossible.
B. I wanted to install the BACKUP software from MARKET PLACE But the LIVE or HOTMAIL and they both work fine on the PC they do not accept my username and password on HD2 and I get an error as if thare is no connection.
PS I do receive and send mails without ani problem connecting by 3G DATA and or WIFI.
What can I do to make use my new device and enjoy it?
Thanks
BAKI DEKEL
You should maybe post in the HD2 "Leo" forum where other HD2 users maybe able to help you.