I Have 2 No Early 2005 (with the cog shaped camera pod) M2000's which have cracked screens, i have now managed to get hold of a working late 2005(with the round camera pod) unit with a duff PCB and swapped the front half (screen and keyboard). When i swap this over all i get is a white screen, is there a software problem and is this compatable. I have checked that the front half does work by fitting it in a late 2005 working unit
Hope someone can help
with thanks
Jubblyone
Same here
I, and others I have read about, have the same problem, but I haven't found of a solution. Let me know if you have any luck.
there are 2 types of screens on BAs..a Sony and Toppoly...u have to make sure u get the correct one for each device.
my o2 having backlight problem where it flickers..sometimes when i shake the o2 abit,the backlight comes back normal..but most of the time..it flickers..
what the problem n solution?
ammar28my said:
my o2 having backlight problem where it flickers..sometimes when i shake the o2 abit,the backlight comes back normal..but most of the time..it flickers..
what the problem n solution?
Click to expand...
Click to collapse
in short unless you feel VERY comfortable opening it AND it's outside of warranty. then backup your data to your pc or sd card and take ti to your provider for a repair, as is either bad solder joint on the LCD or a loose internal cable going to the LCD
can i open it myself..and what shud i do next?
ammar28my said:
can i open it myself..and what shud i do next?
Click to expand...
Click to collapse
you can if you have either a small but very durable flat blade jewelers screwdriver or the proper torques bit that small. but be warnes the side slider in between the camera button and voice record button isn't hard to break off during re-assemby if your not careful.* note from personal experience* also to get to the display the screws inside holding the pcb to the front plate will also need to be removed. to be honest
you don't sound.confident enough to try such delicate work yourself hence I recommend to take it to a repair company either your network provider, the manufacture ie:htc or a 3rd party that offers repairs for your version of the blue angel
Hi,
Could do with some advice of fellow members as my desire camera recently has been playing up, unfortuntly now it just black screens when i goto the application.
After trying various roms ands radios im pretty sure its a hardware fault , luckily i have some spare parts including the camera pcb and i was wondering can i just swap any camera pcb. The reason i ask this is becouse my htc desire is amoled and the camera i have spare is from a slcd device.
advice appreciated thanks
Hey guys,
afew weeks ago, I dropped a 60lbs dumb bell on my phone, it didnt crack the screen but there was some clear damage.
The wifi/bluetooth (same chip) no longer works and the front facing camera throws out an error when it tries to initiate. I'm probably going to buy a new FF camera, anyone else have any experience with anything of the sort? maybe damage wifi chip fix, a link to the chip itself that would be soldered in, possibly? Thanks!
emeianoite said:
Hey guys,
afew weeks ago, I dropped a 60lbs dumb bell on my phone, it didnt crack the screen but there was some clear damage.
The wifi/bluetooth (same chip) no longer works and the front facing camera throws out an error when it tries to initiate. I'm probably going to buy a new FF camera, anyone else have any experience with anything of the sort? maybe damage wifi chip fix, a link to the chip itself that would be soldered in, possibly? Thanks!
Click to expand...
Click to collapse
So many views, anyways - Updating, purchased front facing camera. I will be replacing it as soon as it comes in. So i'll keep ya'll posted. :highfive:
Does gps work? The little gold connectors are next to the camera and they are fragile.
is it possible that the sensors will stop working if htc one m8 get dropped from hands?
the main thing is i have dropped my phone, the display was showing white, now the display is fine but the sensors are not working?(htc center chnaged display and in short spoiled my phone)....
they saying ROOT is reason for having this sensors problems
anyone willing to help me heree?
saiyansection said:
is it possible that the sensors will stop working if htc one m8 get dropped from hands?
the main thing is i have dropped my phone, the display was showing white, now the display is fine but the sensors are not working?(htc center chnaged display and in short spoiled my phone)....
they saying ROOT is reason for having this sensors problems
anyone willing to help me heree?
Click to expand...
Click to collapse
Which sensors? Proximity? Light?
Ive bought some cheap knock off screens to repair my own phone and all the sensors are on the replacement piece. They must have missed a connector or given you a bad part.
On the knock-offs, i had a proximity sensor not work and the light sensors are not that great.
avg2424 said:
Which sensors? Proximity? Light?
Ive bought some cheap knock off screens to repair my own phone and all the sensors are on the replacement piece. They must have missed a connector or given you a bad part.
On the knock-offs, i had a proximity sensor not work and the light sensors are not that great.
Click to expand...
Click to collapse
light sensor,proximity sensor,G-sensor(which causes motion launch),camera flashlight all are not working when htc service center changed my phone's display.
are the sensors available only on the display part?, then they replaced display with fake one nd took money about 8500 INR
they are giving me **** reasons that phone was rooted, i told them there is no relation between display,sensors and ROOT.. i have lodged case against them will see what happens, HTC services in india are very very bad..
Yeah, probably a knock off screen. The screens would cost me about $65usd. If the touch digitizer (the top glass) edges start popping up around the bottom edge, then it's definitely a knock-off screen because all of mine did that. Crazy glue helped with that.
I've never heard of a HTC service center that you can take your phone to. Usually you mail it to HTC.
The phone isn't very easy to take apart if you've never done it before. You must disassemble everything to replace the screen. You can google a youtube video to see how it's done. Not easy for a first timer.
My guess is they messed up or missed connections. I can't remember, but I don't think there is a separate connector for flash, so for the camera to work, but not the flash, is odd.
It is possible for you to disable some sensors with root, but not accidentally. You'd have to manually disable.
I'm not too sure where the g sensor is on the phone.
avg2424 said:
Yeah, probably a knock off screen. The screens would cost me about $65usd. If the touch digitizer (the top glass) edges start popping up around the bottom edge, then it's definitely a knock-off screen because all of mine did that. Crazy glue helped with that.
I've never heard of a HTC service center that you can take your phone to. Usually you mail it to HTC.
The phone isn't very easy to take apart if you've never done it before. You must disassemble everything to replace the screen. You can google a youtube video to see how it's done. Not easy for a first timer.
My guess is they messed up or missed connections. I can't remember, but I don't think there is a separate connector for flash, so for the camera to work, but not the flash, is odd.
It is possible for you to disable some sensors with root, but not accidentally. You'd have to manually disable.
I'm not too sure where the g sensor is on the phone.
Click to expand...
Click to collapse
thanks for your reply, let forget the flashlight but what about light,proximity and G-sensor, even i had htc desire (old one) rooted from 6 years no sensor problem till
and this flagship phone one m8 giving problems :v
the Display material description is "FRU-SUB ASSY, LG DISPLAY,BLACK,LCD" which costs me for 8.5k i.e ($127.877) , even the phone i gave to htc service center which is authorised by HTC, i didnt tweaked phone it was S-ON, i didn't opened phone lol, i just told them to change display but now things are messed up, i did complaint and they took my phone for revision from last 2 weeks ,no phone calls from them nothing, all they telling are bull**** reasons and causes
can you please tell me where G-sensor is by searching or asking someone
even didnt tweaked any hardware part of my phone, the firmware was of HTC in my one m8 , what should be the problem ,? they really messed up with my phone.....i told them that i need replacement of phone(like apple do) , they are contradicting their statements too, they told me to change motherboard which costs around $245. what the hell
due to such poor service in india HTC need to improve their services or people will stop purchasing HTC in india
If they are authorized, call HTC directly. They can probably step in to help you
avg2424 said:
If they are authorized, call HTC directly. They can probably step in to help you
Click to expand...
Click to collapse
nope they dont know anything, they are technically illiterate man, i have called them thrice, they are telling that go to fastboot nd factory reset it, they are noob people,
i have lodged case against htc center, will see what happens tomorrow, they are not listening, its not time to talk and request them , its time to take action against them...
i actually fade up from 2-3 weeks for this phone, thanks for helping though
Hey man were you able to fix that problem? My phone has the same problem (sensors and flash) after I got the battery replaced. Funny thing is that they're also saying it's because of root ( of course it's not )
About not working sensors
tinclan said:
Hey man were you able to fix that problem? My phone has the same problem (sensors and flash) after I got the battery replaced. Funny thing is that they're also saying it's because of root ( of course it's not )
Click to expand...
Click to collapse
Hello folks, i think i solved this issue ... i have a htc m8, just like all of you .. I had a extra battery so i was like. okay its time to replace this one and use this "new" battery i have for this phone. I saw so many videos on internet about tearing it down ( i had exp opening stuff before) I did it without problems actually. When i finished, i found myself with no sensors at all... none of them .. after some hours of digging. I noticed that this problem came along "display replacement, and battery replacement" .. later i found that all the sensors are in the display itself.. Then i opened it again and swaped the old battery and make sure i did connect everything. When I finished, i find myself with the same problem.. and a new one.. my screen was blinking rapidly ... i was like, rlly bro ... so i opened it again for third time.. and this time i saw something i ignored before... every ribbon was protected with a special tape, which is metalic like in the upside, they lost its glue and became loose, so i glued with a soft glue them back in place, for what i know, they do a job, something with faraday cage .. after i secured every "Tape" of this... i closed back my phone and TADAHH... i recovered almost every sensor xD ... my gyroscope is kinda weird. takes sometime to respond.. but i will leave it like that. most important for me was the light sensor and proximity sensor which are working perfectly ... well guys, that was my experience with this phone.. for those who are brave enough to open this challenger phone.. pay attention to these details i said before, and maybe you will get your sensors back.... thanks for your time.. i just made an account to help with this issue