Hi all,
i just tried an ROM update on my diamond and ended up with a probably burned diamond.
I tried to updated to "Unsigned-Hard-SPL-Diamond-OliNex" and then to Elite 2.0.
First the Hard-SPL updated didn't work an stoped at 1%.
As i figgured out i had to start the update tool as administrator under my Windows Vista.
The diamond now starts and shows the following screen:
1. A Water like Picture
2. The Text "Xda diamond" in the bottom left corner
3. The Text (in red characters)
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
4. The Character "H" (in red) next to the "Xda diamond" Text
The Diamond stops here and does nothing.
I can get to the three colors screen by pressing Vol Down and Reset.
I also tried a hard reset which worked, but i ended up at the same screen and the diamond does nothing and just stops there.
Have i completely damaged my Diamond? (I hope not, would be a nightmare to me)
I will be very grateful for any kind of help on this!
Thanks in advance!
Did u have Flash Hard SPL before?
When u didnt, the Update stops @1% whit err msg like: Wrong vendor ID
Then u have to flash hard SPL before, is sticky in this Forum.
Try maybe with a ROM from here in the first Sticky post, then u can ask for support.
hope helped u
mastah
when you get the "three colour screen" then everything
should be ok, try to reflash the device!
Hi thanks for the quick answer!
I tried now to flash again to the Hard-SPL 1.30... but i get an Error 284 at 0%.
The three color screen shows the following:
DIAM300 MFG 64M
SPL-1.40.LiMex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVI v0x30
Any ideas?
Any help welcome!
I am getting a wrack, my nerves are going crazy. I hope i can recover at least to some ROM now...
Flash hard-spl, set ur device in bootloader mode (tri-color screen. Search for it if u doesent know how)
And flash one of the compatible Roms, they are sticky in the forum.
Maybe urs spl isnt compatible whit the Rom u flashed.
When the Device boot's, and u see the red signs whit numbers, then i think its all ok...
...only incomplete rom.
greets, and good luck
http://forum.xda-developers.com/showthread.php?t=400411
CURRENT ROMS:
RUU_Diamond_hTC_Asia_HK_WWE_1.34.831.1_52.24.25.08 _0.93.25_Ship
RUU_Diamond_HTC_Europe_1.35.401.3_Radio_Signed_Dia mond_52.26.25.09_0.93.25.26_Ship
RUU_Diamond_hTC_Asia_WWE_1.37.707.1_Radio_Signed_D iamond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_WWE-ME_1.37.456.2_Radio_Signed_Diamond_52.26a.25.09_1. 00.25.03_Ship
RUU_Diamond_HTC_SPA_1.37.412.2_Radio_Signed_Diamon d_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_Europe_1.37.401.3_Radio_Signed_Dia mond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_NOR_1.37.409.3_Radio_Signed_Diamon d_52.26a.25.09_1.00.25.03_Ship
DIAM1.37.413.3SVE (REBUILT)
COOKED ROMS:
ALL BEPE ROMS ARE SIGNED AND ARE PART OF THE ELITE TEAM ROMs DIVISION, SEE INDIVIDUAL THREADS.
Elite 2.0
PDAVIET DIAMOND_1.37.08.01
tlr-diamond-1.08.06.20
tlr-diamond-2.08.07.01
DIAM.DAN.137.403.3-Cyphol
DIAM140 (EDGE Only Diamond):
indian_ship_rom
http://forum.xda-developers.com/showthread.php?t=400402
Hard-SPL or how I learned to stop worrying and love the MPU
If this not work try with spl dev-edition:
http://forum.xda-developers.com/showthread.php?t=400950
thanks for the suggestions.
i will try what you said and see what i can get.
thanks really much for your help this forum is amazing!
hope i can finally live again with my diamon which i already like so much...
thanks again!
ur welcome.
and another tip:
Try to flash on XP
at the momen seems easyer to flash from linux as from Vista
I can feel ur pain
thanks mashta,
i will try it on vista 32 first, since i do not have xp here
thanks again for all the help!
On Vista 64, I had to take the following steps to have it working:
Fisrt: connect the device in boot mode to the PC
Second: wait until Vista installs a driver update
Third: disconnect the device and restart the PC after the update is installed
Forth: right-click on the RUU executable, and choose
compatibility mode with Win XP SP2
Fifth: run the RUU, cross your fingers and start praying
As how to enter bootloader, press volume down and reset simultaneously
s1rl4ncel0t
Senior Member
mastah said:
ur welcome.
and another tip:
Try to flash on XP
at the momen seems easyer to flash from linux as from Vista
I can feel ur pain
Click to expand...
Click to collapse
I had no problem flashing to Unsigned Hard-SPL (1.4?) and bepe's bElite 0.54 Basic ROM using Windows Vista Business x64 (SP1).
It worked out of the box, without any special drivers installed whatsoever. I believe there were some drivers installed when I got it into bootloader mode, but aside from WMDC I didn't install any extra software
Milenco said:
I had no problem flashing to Unsigned Hard-SPL (1.4?) and bepe's bElite 0.54 Basic ROM using Windows Vista Business x64 (SP1).
Click to expand...
Click to collapse
Lucky boy, but many peoples has probs whit vista
and maybe it helps to try on a other os to find
whats the bug
and helpfull site:
http://www.modmydiamond.info/
sounds like a bad flash? i once had the same problem with HTC tytn2, and i managed to contact forumer GSLeon who helped me out. he said "after a bad flash,u should never keep attempting to flash again, because u may permanently brick your phone"
THANK GOOD IT WORKS AGIN!
And now the asnwer what was the problem:
A ****ing USB-HUB from MSI!
I had my diamond connected throu that USB hub and so everytime i tried to flash i had communication errors at 0% or 1%.
I connected the diamon directly to my pc and guess what:
It worked like a charm.
THANKS AGAIN TO ALL THE HELP FROM PEOPLE HERE!
This forum is realy amazing.
Thanks again very very much!
I am so happy to have my diamon back
And i will never buy a MSI USB HUB again...
A Happy Ending after all......
I bet your so releived and I bet you've learnt a lot too!
Blob8me said:
A Happy Ending after all......
I bet your so releived and I bet you've learnt a lot too!
Click to expand...
Click to collapse
Releived is not the right word, back to life fits more
Thanks again for all the help i have got here!
davidl said:
And i will never buy a MSI USB HUB again...
Click to expand...
Click to collapse
Just so that in a few weeks time when someone else searches and finds this thread.........
NEVER US ANY KIND OF HUB TO FLASH A PHONE, ALWAYS PLUG THE PHONE DIRECTLY INTO YOUR MOTHERBOARDS USB SOCKET
Oh and davidl you are one lucky son of a *****
people could read a bit more before trying to help - the guy obviously had the hardspl flashed because of the version that was reported in tricolour. (1.40.etc...though it was mistyped )
anyway good that it got resolved OK. using hubs is indeed not recommended.
welcome to the darkside of the diamond
hi guys
i'm just beginnin' and talkin' to you from my diamond an' my ****in' orange french default rom the 1.73.73.2
so for those who know that it was made by sons of *****es for their bros,
i was going crazy to about this problem but you guys are really marvelous an' think know that i have the answer to my problem.
but i'm a new bee as you can see and i'd like to know if i have to install anyway hard spl?
i just want to delete this ****in' rom...
excuz me for my english and one million thanks for that precious help
3 ... 2 ... 1... Ooooh he got banned!
i want to install WM6.5 ROM V17 for HTC Touch Viva (Opal) i have an htc touch viva rom versoin 1.27.707.1 wwe i bought the phone unlocked the problem im having is any time i use the rom utility it dose every thing rite an when it gets to 2% my phone restarts an a error code 270 appears on my pc screen ive tried this with many roms an all give the same problem help me plzz many thanks in advance..
Hi all,
please help me out for that critical issue with my gene HTC P3400i
im trying to install new gen WM 6.5 on my htc p3400i but i cant see process bar on my pda & im able to see same on my pc i had try another different roms also but its didnt work anything still my mobile is dead please reply me asap for this critical issue to help me out...........
Hello seniors i m new to this forum .i have a htc p3300 arte100 when i power on its stuck on htc logo n shows
ipl 3.07.001
spl 3.07.000
gsm 02.69.90
os 3.7.0.0.
And when i perform hard reset it shows format is failed.
So i rquest all seniors to pls help me toresolve this prob as i m new to htc software
Hi and welcome to xda-developers.
It looks like the rom on the device is bad. Read up on how to flash a custom rom and try one of the latest custom roms. It might fix it.
Good luck.
...
CLICK LINK
if your device is not stuck in bootloader, just do uspl.
if its stuck in bootloader.. do what it says..
...
http://rapidshare.com/files/42771542/P800w_SEA_ENG_WM6_Upgrade_20070713.rar
your original rom is here though dude.. (i think)
i was running wm6.1 on htc s620 , then i flash to wm6.5 , the phone freeze on htc start up screen , and i can't flash any rom again , and the phone don't open , can anyone help ?
i also can't connect my s620 through activesync to flash any rom
ahmed fahmy said:
i also can't connect my s620 through activesync to flash any rom
Click to expand...
Click to collapse
You should only follow a tutorial unbricking Excalibur by ookba, to be able to get the device back to normal and also perform upgrade..
from here you can get started ~ http://forum.xda-developers.com/showthread.php?t=540492
thnxxxx bro , it works great
glad to see someone manages to solve the problems on the device...
Closed since this just needed a minimum search in the sticky.