Related
Hi
I've recently upgraded to TMOB 1.72 but thanks to DCS's guide, now managed to install the new o2 rom released this week.
However, if i now try to install the new apps such as Fonix Voice ial, it comes up with a message saying incorrect rom version.
Can anyone suggest anything? I've looked but although some people have had the same problem, noone seems to have put forward any solutions.
Cheers
Anthony
Have you done a restore since upgrading?
No I haven't done any restoring afterwards. I went from 1.72 tmobile straight ahead with the new o2 version, after going through your Country ID problem post.
I've looked at the two setup files in the fonix2.0UK0527_O2Limit_20040901.sa.cab from C:\Program Files\Microsoft ActiveSync\HTC Apps and found the same O2 vs CDL in both files, when viewed in a hex editor. However I'm now stuck on finding a way to update or remake the cab file to try again. Does anyone have any suggestions on how to do this or if they had another plan? would it just be easier to downgrade to the official 1.66 o2 and then upgrade again? Also how do I check my version of Bootloader?
Many thanks
Anthony
Anton.Valleyman said:
No I haven't done any restoring afterwards. I went from 1.72 tmobile straight ahead with the new o2 version, after going through your Country ID problem post.
Click to expand...
Click to collapse
What operator ID value did you use for the upgrade? Also, can you tell me what values are in your registry for HKEY_LOCAL_MACHINE\Software\OEM\3rdversion\MSYSTEM and HKEY_LOCAL_MACHINE\Software\OEM\3rdversion\MSYSTEM1.
My DeviceData file said CDL so I changed the .nbf file from o2 to that. i have got slightly further now in that the application tries to install but when it does, it says it cannot the various dll's etc. I think its a prob with the cab file generation, and i cannot find a program that allows me to add/replace the contents of the cab file.
Registry settings are
MSYSTEM - 1.72.181
MSYSTEM1 - O2_UK.
Thanks for your help.
OK, thanks for the info.
Just to update you...
I solved it in the end. I was having trouble with the .cab file because it was compressing itself rather than staying in its usual state. After changing the O2 setting to CDL in the settings files within the cab, and recreating the cab file before sticking it on the phone, it worked fine.
Cheers
Anthony
Please Post modified cab
Could you please post your modified cab?
I am having the same issue trying to install Fonix VoiceDial on the T-Mobile Final 1.72 Rom.
Thanks.
oops, I think i deleted it. I don't have access to it here, but I'll redo it tonight and send it tomorrow.
Cheers
Anthony
I'm having a problem opening the Fonix CAB file. It seems to be different from other cab files. Can you please post the modified one?
Thanks,
Sorry I forgot to redo it, I'll try my best to do so tonight and then I'll post it tomorrow morning.
Cheers
Anthony
I also noticed this extensive version checking 'feature'.
I managed to solve it myself for KSE True FAX 2.0
I simply replaced the new/added (aparently O2 specific) setup dll's with an older version.
For the ZIP application I think the T-Mobile supplied version works for all other operators as well
I would like to 'fix' the Fonix app too, but I am still stuck on the 'weird' CAB file . . . .Anyone who can get me this in a 'normal' cab format?
Edit: BTW I added a Dutch language Fax Coverpage as well
edsub said:
I also noticed this extensive version checking 'feature'.
I managed to solve it myself for KSE True FAX 2.0
I simply replaced the new/added (aparently O2 specific) setup dll's with an older version.
For the ZIP application I think the T-Mobile supplied version works for all other operators as well
I would like to 'fix' the Fonix app too, but I am still stuck on the 'weird' CAB file . . . .Anyone who can get me this in a 'normal' cab format?
Click to expand...
Click to collapse
Good work edsub. I wanted to look at this, but unfortunately my WinCE Cab Manager trial has expired (current version and previous version) and $149 is a bit steep.
yw, but the Fonix thing is still anoying me . . .Google didnt help either . . .
@edsub nice work
Just out of curiosity where did you get the older version of setup from?
@dcs I know, my WinCE Cab manager has only 8 trial left .for professional work 149 is a reasonable price, but for simple users like me :roll:
maybe they should give us one for free, for promoting their tool on this forum
M4io said:
@edsub nice work
Just out of curiosity where did you get the older version of setup from?
@dcs I know, my WinCE Cab manager has only 8 trial left .for professional work 149 is a reasonable price, but for simple users like me :roll:
maybe they should give us one for free, for promoting their tool on this forum
Click to expand...
Click to collapse
I couldn't agree more I am actually tempted to buy it though. I installed the newest version and once I used up the 15 executions, I found the previous version somewhere and installed that and that gives you 20 edits - and now I've used those up too Maybe I will email them.
Damn, and I remembered to bring it today as well.
Oh well, all's well that ends well.
Cheers
Anthony
I used the setup dlls from one of the cab's originally deployed on a T-Mobile ROM. I removed the setup dll that has 'O2' in its name.
Apparantly it's one of those new setup dll's that does the version check.
BTW In TrueFax I added a Dutch language coverpage
@Anton: Could you please provide the info on how you managed the Fonix cab to get installed.
I am trying to make is for general use and not just to change some version/operator name in the cab-file (which BTW is of a different type that usually)
You just got your X01HT and would like to use the latest WM6 ROM in English with your Softbank account ?
Here is a quick guide, gathering information that has been exchanged and spread accross many threads on this forum (Searches can be fastidious, I know that well...)
I have been reading this forum a lot, keeping on asking questions to everybody, so it's time I contribute a bit to help by describing step by step how I switched my Japanese WM5 Softbank X01HT to a WM6 English device
This post is target at Gaijins who want an English WM6, but still want to be able to use Japanese with it. For a Japanese MUI or ROM, I guess Asukal will probably publish something
***EDIT: for a 100% Japanese ROM, you can now have it here: http://buzzdev.net/index.php?option...um_query=read,40,30486,30597,page=2#msg-30597 ***
I was first willing to cook a ROM including all these, in order to spare some space on my HERMES. I had already cooked an "intermediary" one when Tadzio issued his method to make a "shrinked" OS ROM that would allow you to use the spare space from the ROM
Since this, no point in adding all these mods in my ROM
First: making flashing safe
Download Hard-SPL-V2 from the great Olipro to avoid bricking your device. Here: http://forum.xda-developers.com/showthread.php?t=296722
Install it
Then, get your ROM.
Download the_passenger ROM shrink version of LVSW 20070320 ROM (More space available) and install it (Read threads about flashing ROMs if you are not familiar with that...)
http://www.megaupload.com/?d=8YJATBPG
Install the Softbank AP Settings for your internet connection. You really WANT that. Big thanks to itamae without whom we'd be stuck on first of April this year... (Or I'd still be using WM5)
http://forum.xda-developers.com/showthread.php?t=298031
Now you need a Registry editor
I am used to PHM Regedit. You can find it there for free:
http://www.phm.lu/Products/PocketPC/RegEdit/
To map properly your Softbank Keyboard, do the following registry modifications:
[HKEY_LOCAL_MACHINE\Software\Oem\Qwerty] "Layout"= 30411 (Hexadecimal base)
[HKEY_CURRENT_USER\keyboard layout\Preload] "Default"= e0010411
[HKEY_CURRENT_USER\keyboard layout\Preload\1] "Default"= e0010411
More details here: http://forum.xda-developers.com/showthread.php?t=286787&highlight=keyboard+x01HT
To allow the video Call key to appear on your phone keypad, modify the registry as follows:
[HKEY_LOCAL_MACHINE\Security\Phone\Skin] Enabled = 1
Optional: getting rid of useless trayapp (It looks nice... but it Slows down the Hermes and you can replace it with better apps)
Delete TrayApp key from [HKEY_LOCAL_MACHINE\init]
Fix the disappearing micro SD (Doesnt really work for mine... But could work for yours...)
[HKLM\System\StorageManager]"PNPUnloadDelay" = dword:8196 (Decimal base)
[HKLM\System\StorageManager]"PNPWaitIODelay" = dword:8196 (Decimal base)
More details here: http://forum.xda-developers.com/showthread.php?t=294324
Now time to have your Hermes speak Japanese
Japanese fonts
Use the excellent work from Asukal, that you can find here:
http://www.asukal.jp/WM5/LetsJapanNo5.zip
I did have a problem with it: once I executed it, I could not sync with my Exchange server (Quite a pain for my push email account...)
Asukal found the solution: edit the registry, and change
[HKEY_LOCAL_MACHINE\Software\Mobem\CE-Star] "MyNLS" = "\windows\wince.nls"
Japanese input
Not using for myself, but these work perfectly (I tried):
http://www.asukal.jp/WM5/BagojsINPUT.zip
*** EDIT
If you prefer a Japanese input without the annoying "Floating bar", ie just the same input way as your original WM5 Softbank ROM, just downlaod and install the "MS IME31 J" link from Asukal's page:
http://hn801.hkes.com/Data/SIP/IME_31J_QVGA_F.zip
*** /EDIT
Silent mode switch
You're going to be missing the Softbank unique way of switching to silent mode (Only available in Softbank ROM)
The way to go around this is by using Vibra
Details available here: http://forum.xda-developers.com/showthread.php?t=277811&highlight=vibra
Download here: http://forum.xda-developers.com/attachment.php?attachmentid=31657&d=1164714506
MMS
Softbank's MMS System is a pain because it's incompatible with "classic" MMS systems...
You can download Softbank's software... But... it's slow, big, bulky, ugly, etc... If you dont mind missing the emoticons, you should go for MMSLite
Regedit, Look for Arcsoft. Delete all references to Arcsoft (Sometimes need to be done in several times, some entries being in use if you have by mistake launched MMS Composer once since your flash of the OS...)
If you dont do these eletions, MMSLite will actually not install...
Downlaod and install MMSLite
http://forum.xda-developers.com/attachment.php?attachmentid=33982&d=1170599400
It should work perfectly !
I you have enough courage (And ONLY after having installed Hard-SPL 1.11 !!!), you can try flashing your radio
You dont have to... but the latest 1.38 does seem to grant an improved battery life
http://forum.xda-developers.com/showthread.php?t=297925
Now you're done, you have a great phone with a faster OS, more storage space, improved battery life, that works perfectly with Softbank AP, can use Softbank proprietary MMS system, and can read and write Japanese
After, there are lots of other things you can do, like mounting your Extended ROM to gain extra space, Unlock the SIM, etc, etc... But it is not the purpose of this thread. Have fun reading the forum, it is well documented in other threads
Have fun !!
another gaijin
just read yourpost today...im at work and i cant wait to go home and follow each of these steps.
man thanks...this is what some of us gaijins are looking for the past few weeks.
btw,
you mentioned sim unlocking etc...etc...
you mean to say, sim unlocking is done after the wm6 flash? why would some do that before the flash?
Hello,
The only problem when upgrading is the Japanese input. I used sometimes (so I need it), but I I install Japanese input package you told in your post the I have a really annoying floating bat anywhere, and it's really unnoying.
There is no way to have same kind of input in enlish ROM?
sesaru said:
Hello,
The only problem when upgrading is the Japanese input. I used sometimes (so I need it), but I I install Japanese input package you told in your post the I have a really annoying floating bat anywhere, and it's really unnoying.
There is no way to have same kind of input in enlish ROM?
Click to expand...
Click to collapse
Try Asukal's IME package (see bottom of page):
http://asukal.net/blog/?cat=8&paged=3
... it includes the input method from WM5 (or one extremely similar). I'm using it with WM6 Black Edition 1.2 and have had no problems with input so far.
As for other Japanese/Japan-conversion-related issues:
- I found that when the Japanese wince.nls file is loaded, .NET CF programs crash with a 'PlatformNotSupportedException' error.
- With MMSLite installed, I can receive MMS, but not send.
ashikase said:
Try Asukal's IME package (see bottom of page):
http://asukal.net/blog/?cat=8&paged=3
... it includes the input method from WM5 (or one extremely similar). I'm using it with WM6 Black Edition 1.2 and have had no problems with input so far.
As for other Japanese/Japan-conversion-related issues:
- I found that when the Japanese wince.nls file is loaded, .NET CF programs crash with a 'PlatformNotSupportedException' error.
- With MMSLite installed, I can receive MMS, but not send.
Click to expand...
Click to collapse
Does it have the floating bar, like in WM5?
sesaru said:
Does it have the floating bar, like in WM5?
Click to expand...
Click to collapse
No, no floating bar.
It works just like the IME from the Japanese WM5 ROM.
Sugoi!! I'll update now
ashikase said:
No, no floating bar.
It works just like the IME from the Japanese WM5 ROM.
Click to expand...
Click to collapse
Eh! I just install ... There is the floating bar ... (>_<)
Magnificent !
I hope you'll let me be a little off-topic.
I actually installed the Japanese ROM you linked to, it works like a charm, but I have a question to SoftBank users :
I'm going to work in Japan soon (1st of April) but I want to use my Hermes as my primary phone, etc. Is it possible to go to a SoftBank shop and tell them basically "Don't ask me how, but this phone is SoftBank-compatible. Now please register it into the SoftBank network and gimme a standard phone subscription. Thanks".
Meaning how can I register my phone (SIM card ? I looked and they seem to have only outrageously expensive SIM cards on loan for 108円 a day, with no 3G connectivity. Or is it possible to get a standard subscription?)?
Thanks for your help
Yannick
sesaru said:
Eh! I just install ... There is the floating bar ... (>_<)
Click to expand...
Click to collapse
Really? I don't get a floating bar.
Did you try it on a clean installation of WM6, or did you install it after installing the Bagojs IME? Maybe some settings in the registry are causing the bar to appear.
Also, did you set your locale to Japanese in "Control Panel->System->Regional Settings"?
pharoah said:
just read yourpost today...im at work and i cant wait to go home and follow each of these steps.
man thanks...this is what some of us gaijins are looking for the past few weeks.
btw,
you mentioned sim unlocking etc...etc...
you mean to say, sim unlocking is done after the wm6 flash? why would some do that before the flash?
Click to expand...
Click to collapse
Nope, just look for it on the forum. Dont wanna spoil your fun
sesaru said:
Eh! I just install ... There is the floating bar ... (>_<)
Click to expand...
Click to collapse
hi man, following these steps:
- Install LetNo5 (Jp Font)
- Install BajosIME
- Install AkusakIME (on device) not in storage card
It work for me and my friends, perfect !!!
Goodluck!
CutKit said:
hi man, following these steps:
- Install LetNo5 (Jp Font)
- Install BajosIME
- Install AkusakIME (on device) not in storage card
It work for me and my friends, perfect !!!
Goodluck!
Click to expand...
Click to collapse
You shouldn't need to install both BagojsIME and Asukal's IME package, just Asukal's. BagojsIME provides an older version of the MS IME.
Use you own phone with SB
You can pick a ZERO Yen phone to do a new contract with SB. Then change the sime card to your onw phone. Suppose you have a sim-unlock phone.
Cuivienor said:
Magnificent !
I hope you'll let me be a little off-topic.
I actually installed the Japanese ROM you linked to, it works like a charm, but I have a question to SoftBank users :
I'm going to work in Japan soon (1st of April) but I want to use my Hermes as my primary phone, etc. Is it possible to go to a SoftBank shop and tell them basically "Don't ask me how, but this phone is SoftBank-compatible. Now please register it into the SoftBank network and gimme a standard phone subscription. Thanks".
Meaning how can I register my phone (SIM card ? I looked and they seem to have only outrageously expensive SIM cards on loan for 108円 a day, with no 3G connectivity. Or is it possible to get a standard subscription?)?
Thanks for your help
Yannick
Click to expand...
Click to collapse
I didnt have to install anything to get the Manner mode working. I think this is implemented in WMXL. But when i set the phone skin security to 1
my phone pad disappears, turns white. Renders unusable. The only fix for me is to set it back to 0.
This might be due to the carrier setting, it happens immediately after running SB external rom carrier info.
Any ideas?
Alcibiade said:
Then, get your ROM.
Download the_passenger ROM shrink version of LVSW 20070320 ROM (More space available) and install it (Read threads about flashing ROMs if you are not familiar with that...)
http://www.megaupload.com/?d=8YJATBPG
Have fun !!
Click to expand...
Click to collapse
It would be nice if you could upload the above ROM to somewhereelse, I can not download it from megaupload or rapidshare.
Many thanks.
nghihuu said:
It would be nice if you could upload the above ROM to somewhereelse, I can not download it from megaupload or rapidshare.
Many thanks.
Click to expand...
Click to collapse
Just to be very clear the ROM is not mine, it's LVSW's and shrinked by the_passenger
I think there are a few other links where the_passenger has uploaded it:
http://depositfiles.com/files/716306
http://fileho.com/download/d96fc8956370/20070320-RUU-Hermes-WWE-3.23.0.0-OS-only-More-space.rar.html
, including a torrent
http://www.demonoid.com/files/details/1075594/?show_files=&page=1&ref=1174503017#file_list
@s2k7: thanks for the tip I'll do that Thanks again
Alcibiade said:
Nope, just look for it on the forum. Dont wanna spoil your fun
Click to expand...
Click to collapse
Hi Bros, I already upgrated the new version and it is working very well. tks so much for ur contribution! and i would like to ask u a question is it possible to unlock the SIM with WM6 version? tk you in advace.
have a nice working week.
tigerwood said:
Hi Bros, I already upgrated the new version and it is working very well. tks so much for ur contribution! and i would like to ask u a question is it possible to unlock the SIM with WM6 version? tk you in advace.
have a nice working week.
Click to expand...
Click to collapse
Pof has published an unlocker an I think it should work (Havent tried yet since I dotn really need it...)
Shadowmite's Cingular AT&T Trinity Rom:
Code:
Shadowmite 1.1 Trinity Rom:
Based on the offical release rom and using kernel 1437
Using 4MB Pagepool
Removed:
-Adobe Reader
-Midlet Manager
-IA_Zip
-Streaming Player
-Windows Live
-all the pics/vids/rings other then 2 standards
Changed:
New theme
Full screen commmanger
Date/Time pulled from network on start
Keyboard overlay is the nice one from PDAVIET
Fileexplorer is swapped for one with icon abilities
Added:
+Cingular customizations
+HTCustom 1.7
+SoftKey Control Panel
+HTC Home Plugin
+X-Button
+Batterystatus today plugin
Regedits:
Set for high quality A2DP default (jointstereo, sample rate 48000 and no bitpool)
Set to show network time tab in phone and enable it
Set to enable disconnect and data timer default
Set to hide SIM contacts default
Set to disable security by default
The one bug found so far in this release can be fixed with the X-Button Fix.cab attached below.
http://rapidshare.com/files/44078979/Shadowmite_1.1.rar.html
Thanks!
I always feel like such an outsider way out here in AT&T land! Thanks for the special attention. Downloading now!
Here's where I get to show my stupidity!
All the other ROM I have flashed have come with a utility to run the process. I tried replacing a previous rar file with this one and running the utility I had, but it changed nothing. I have read all the guides, the step by steps, etc, but the info seems to be for full packetsm not how to insert a new rar. I am dense. I am uneducated, I am sorry!
Thanks Shodowmite. It's good to have someone taking care of us ATT dudes.
What is the difference with other ROM ?
Is there something specific for AT&T ?
Sorry if the question is stupid, but I don't know AT&T particularities... ;-)
auramae said:
All the other ROM I have flashed have come with a utility to run the process. I tried replacing a previous rar file with this one and running the utility I had, but it changed nothing. I have read all the guides, the step by steps, etc, but the info seems to be for full packetsm not how to insert a new rar. I am dense. I am uneducated, I am sorry!
Click to expand...
Click to collapse
ok, have you flashed hard-spl on your phone before? If not, search for it and flash it! Next, you need winrar or some other file extraction program to extract the rar file (a compressed folder) to get the files out. Then you'll find the installer files inside, you run the exe... Hope this helps.
What is the difference with other ROM ?
Is there something specific for AT&T ?
Sorry if the question is stupid, but I don't know AT&T particularities... ;-)
Click to expand...
Click to collapse
Mainly the big thing is this includes by default the sms/mms and data/proxy settings for cingular/att's network. You can use this rom with another carrier, but you'll need to delete those settings or install you own over top of them.
It's the little things
Thanks for the patience with my idiocy. I got WinRar and am flashing now.
auramae said:
Thanks for the patience with my idiocy. I got WinRar and am flashing now.
Click to expand...
Click to collapse
We all have to learn at some point, I was no better when I started long ago... Don't worry about it and just learn at your own pace... Hope you like the rom!
I've updated to Shadowmite 1.1, while this is still a "beta" if you will, it's perfectly stable and appears good. Use this one if you want the HTC Home Plugin available... I've also removed windows live and streaming media in this version:
http://rapidshare.com/files/43857196/Shadowmite_1.1_beta_0.rar.html
Thanks. Good job. Downloading.
Ive had it running for a few days now and have noticed marked improvement on battery life. My only challenge has been running out of program memory during IE sessions. I run MemMaid and clean up, then I can go again, but I'm wondering if I have something set wrong.
Hmm, not sure, but I will be releasing another version maybe tomorrow with a increased available program memory using a 4mb pagepool instead of the stock 6mb.
Slightly off topic but is there a way / application to load apps & information in one go after flashing a new rom or is installing all the cabs one by one the only way.
Thanks in advance
S
Well, dunno if it helps much, but my HTCustom app, which is in my roms has a CABS button which allows you to choose a folder and it starts all cabs in it to be installed for you... but it needs human interaction.
In other news, the rom is ready and uploading now...
Version 1.1 is posted, now with 4mb pagepool, should increase your program memory a little and make it perform a little more quickly. I think this is about perfect now, let me know!
Nice ROM, but...
Shadowmite said:
Version 1.1 is posted, now with 4mb pagepool, should increase your program memory a little and make it perform a little more quickly. I think this is about perfect now, let me know!
Click to expand...
Click to collapse
Hi, A very nice looking ROM - for which... thanks!
BUT... I keep getting... "An unhandled error has occured in the shell. Attempting to restart the shell [ok]". Soon as I hit the OK, phone reboots.
Now, to help u diagnose... I have installed NOTHING on top of your ROM. Only change I made from stock is I removed your Cingular settings .cab and installed the standard HTC ones for my UK Vodaphone network. (Actually, I was getting this error BEFORE I even removed the Cingular .cab)
Only other thing I can say is, I also unchecked the BatteryStatus plugin from the Today items (as I don't like it or need it... or do I, with this ROM? Maybe I will re-enable it a while...)
That's all. I'll try and stick with this ROM as it's the kind of thing I've been working on for myself... nice, clean and tight... but I've had no time recently to develop ROMs so it's easier for me to run with your work and let you do the head scratching!! Still, a nice effort so far - thanks again!
Moz.
Weird, I've never seen that error. I hate to say it, but could you start with the rom freshly flashed and tell me anything I can do to cause this to occur? Or is it random? I do run the battery status plugin on mine (very useful info, especially the current draw) but I've just removed it to see if I can get the error.
Let me know if you have any procedure I can try to get this error.
Also, you removed the cing.cab and then installed yours and ran it? That should be fine as the only cingular branding is that cab being ran after the welcome.
Fixed it... I think!
Ok, so it seems to be your 1.51 version of the HTC X-Button task manager. I always set the "End progs by tapping X" (not the default tap-and-hold option..) The previously mentioned error only ever happens when I'm tapping X to close down something or other... So, I installed my own .cab of this app (v1.5 build 29196) and all is now fine!
I'll probably do a fresh flash of your Rom tomorrow (its 2am now here) just to be sure, but I think I'm right in saying that your implementation of the x-button app in rom does not give the x-button icon in /start/settings/system... (i now have this by virtue of my reinstalling the app...) I think this icon *is* needed because if you choose to turn off the x-button "shortcut" thingy in the today screen there would otherwise be no way to get back to the x-button option settings.
Hope this helps...
Moz.
a-ha, I got the error now myself, but only if set to close app on clicking the X and furthermore then closing a system app that is running from shell32.exe. For some reason my entries of immune apps aren't being taken as immune. I'll look into this. Good catch!
The program however is in settings, system and is listed as task manager...
Ok, here is the fix, just install this cab (reg entries only) and it'll be working after the next soft reset... I'll figure out why this didn't work from the main hive before the next release.
Hey guys.
I am not very into the topic cabs, but is it possible to create one cab that installs all the cabs of my favourite applications ? This would make the post-flashing process much much easier.
Thanks in advance
Tobi
Cant be done man, sorry. You cant mass install like 5 cabs in one hit. All you can do is create a cab to extract 5 cabs to a location
You can get a program to install them consecutively after one another (like Sashimi), however as luckyluke1137, that's probably not possible. If it were, WIN CE CAB Manager would be your best bet for manipulating/playing with CABs.
kareem9nba said:
You can get a program to install them consecutively after one another (like Sashimi), however as luckyluke1137, that's probably not possible. If it were, WIN CE CAB Manager would be your best bet for manipulating/playing with CABs.
Click to expand...
Click to collapse
What's the story with Sashimi? It looks like it's been pulled whenever it gets posted (http://forum.xda-developers.com/showthread.php?t=392983) and I can't find a developer's website (Google failed me). Any ideas? I presume it's a paid app and the developer is prohibiting distribution...
okay thank you for your answers...unpacking the cabs to one folder is not nessecary because they are all in one folder on my sd card. Just thought if there was an easy opputunity to install all of them "one-click". but seems this is not possible.
Most rom are UC compliant and it's very easy to write a quick script to install all your favourite apps as part of the customising process just after the flash takes place.
I've a script to install a few apps and also to setup my email account. You can also do loads of other stuff to if you want to such as setting power settings etc.
Take a look at http://forum.xda-developers.com/showthread.php?t=366337
thank you very much crankshaft. i will have a look at it. only have to find out if the roms i use (leos) are UC compatible. but this would be exaxtly what i was looking for !!!
tobi1984 said:
thank you very much crankshaft. i will have a look at it. only have to find out if the roms i use (leos) are UC compatible. but this would be exaxtly what i was looking for !!!
Click to expand...
Click to collapse
No worries mate. Most roms are UC compliant, having said that though I've just seen that Dutty's forthcoming rom will not be but I'm sure he'll get round that eventually.
Hello,
its possible with commercial software or trialware. but it's time consuming because you have to extract each cab merge the install setting files merge the registry settings file then rebuild the cab test the cab etc... i have done it one but with uc it's not important enimore.
i suse this method only to incorporate custom settings in cabs file.
@ tylwith okay sounds very hard to do. i think i will stay with UC then. Even if i will test dutty´s new rom because it looks great
Manilla 2.0 with weather fix added. You need goto [HKEY_LOCAL_MACHINE\Software\HTC\Manila2D\Weather\0]
Edit the Following:
"LocationCode"="YOUR ZIP HERE"
"Location"="THE NAME OF YOUR TOWN"
So that you will have your local weather. You need to update your weather manually from your weather tab, and in about 15mins your home screen will update. If you want I can make a cab file with your weather information so u just need to install it and be good to go, just post your zip and city, or pm me your info and I'll post a cab for you. Here it is let me know what your all think. Special thanks to LMiller for the weather regedit information.
http://hotfile.com/dl/45643327/e89b8d3/23569_New_Manilla.rar.html
You will need your Carrier Cab. If anyone needs a link to these let me know.
You MUST have A Radio Version of 3.42.30+ for this ROM to work
Special thanks goes out to LMiller for his Manilla Oem and his help with getting me started, and to Justpctech from ppckitchens, and Wooptiewoous for some reg tweaks and internet boost.
**I'm Not Responsible for you Device**
Thanks for this new rom!
Can we have some description of what's included and excluded? and some screenshot if possible? (If it's any different from the others.. )
Nice ROM!
Clean, Fast, but a little more info needed from your install
1) Install Carrier Cab
2) Install MortScript 4.2-PPC
3) Install CDMA Weather Fix
4) Reboot
5) Install SMS Timestamp Fix
This is what I had to do for Sprint and I was getting an MSCR error on first boot until I installed Mort Script.
Otherwise, nice rom as far as speed.
Even though it is a 'Lite' rom - I'd definitely recommend adding
Mortscript 4.2
Advanced Config 3.3
PIM Backup - Latest
Please screenshot & info about Ur firmware!
I can give a general info on what's installed.
Office 2010 mobile
.Net framework 3.5
Total Commander
PHM Regedit
Manila 2d Configurator
Internet Sharing
Couple other minor utilities and I think Swype input is installed
Pretty basic Rom, no games included.
Sorry guys, been on travel and thought I'd have time to spend on the rom and everything, but had to work more than expected. This is a pretty basic rom. Some people don't like a loaded rom, and want to be able to customize it by adding what they want, so that's what this rom is for.
The rom includes:
sys 23569
Manilla 2.0.19191432.04
1 Calculator
Total Commander
PHM RegEdit
SpbScreenShot
Net Config
sms Date Fix
Rotating Clock instead of Flip Clock
Iphone type text message
ezinput keyboard
4 Column start menu
Swype keyboard
http://winbreak.com/winmo/voguegoodies/
--Carrier CABs.
I'm looking for an even "lighter" lite ROM - I want to find one with as few programs installed as possible. I can install MyPhone, Marketplace, MyPhone, etc... Total Commander is about all I'd want pre-installed, so I can edit registry settings if need be.
Perhaps I should try cooking one, myself? doubtful.
NuAngel
NuAngel, are u looking for the manilla with the weather on the home screen, or regular manilla, or no manilla?
ski21 said:
NuAngel, are u looking for the manilla with the weather on the home screen, or regular manilla, or no manilla?
Click to expand...
Click to collapse
I, myself, am a pure Titanium user, no manila. I keep it simple.
Nu
I'll make one that is completely stripped. The only thing that will be added is the what is needed to make the rom to run.
Here is the link
http://hotfile.com/dl/47507481/0e16095/23569_Barebones.rar.html
Sweet, thanks! I just started tinkering, kicking around the idea of my own build. Having a hard time with it though... I'll get there!
Nu
Need to send a thanks out to LMiller for his carrier provision program. It is awesome. It allows you to pick your carrier once the phone first boots up, very nice, and Thanks LMiller for your support of the vogue.
ski21 said:
Need to send a thanks out to LMiller for his carrier provision program. It is awesome. It allows you to pick your carrier once the phone first boots up, very nice, and Thanks LMiller for your support of the vogue.
Click to expand...
Click to collapse
Not a problem! And Glad to help!
Make sure you have the newest version HERE!
Next step will be a full auto-installer program!
If you can get an auto installer that would be awesome. Thanks for the new version.
hello
I like the manila with analog clock the most.Can anybody give me a link to a cab file?
Yes this rom is fast and I like it.But am missing the analog clock.
One annoying problem I am facing though.Everytime I reboot the phone,the mscr error pops up although I have installed tmortscript 4.3 beta 15.Is there any way to get rid of this?
I upgraded to the TP2 now, so my vogue cooking days are over. I'm not sure why that keeps popping up on boot up. I thought it was a mortscript error, but maybe it isn't.
Hi
Ok,Thanks for your great work.But before you leave the vogue forum,will you please give me the link to the cab file of manila version with the analog cloc?
I would, but I only have it in OEM for cooking, not a cab file. Sorry.
I have bumped this because it is one of the best ROMs here, and my personal favorite.
Very stable and looks good. Give it a try.
Mike
Thanks, I appreciate the comment.