Develop Bugs

WM6 WWE for P3600?

Now that the official WM6 upgrade has been released for the D810, does anyone have any updated information as to whether it will be released for the P3600 and if so, what time frame?

I don't believe HTC has agreed to release it. Why don't you just flash hard-spl and a nospl version of it posted here?

Shadowmite said:
I don't believe HTC has agreed to release it. Why don't you just flash hard-spl and a nospl version of it posted here?
Click to expand...
Click to collapse
I'm just being cautious. I'm on T-Mobile USA and developed SMS sending problems with the official WWE GPS upgrade, so I'm now hesitant to try a ROM not intended for my P3600. Perhaps if someone on T-Mobile USA has successfully used the D810 WM6 ROM, I'd be willing to take a chance. I sure would like HTML capable email!

Their excuse...
Hello Sir,
The network partner from HTC did not request the upgrade for the Windows mobile 6 for the P3600, that's why unfortunately the HTC P3600 will not have this upgrade.
Thank you for your enquiry, Should you have any other problem, please do not hesitate to call us. Your Local number can be found at http://www.europe.htc.com/support/csbyphone.html
Best regards,
**** ********
HTC Europe
[email protected]
http://www.htc.com
Click to expand...
Click to collapse

that's what HTC europe said me today.
Hello Sir,
Unfortunately HTC Europe will not release Windows mobile 6.
Thank you for your enquiry, Should you have any other problem, please do not hesitate to call us. Your Local number can be found at http://www.europe.htc.com/support/csbyphone.html
Best regards,
Lena
HTC Europe

PGMMA said:
I'm just being cautious. I'm on T-Mobile USA and developed SMS sending problems with the official WWE GPS upgrade, so I'm now hesitant to try a ROM not intended for my P3600. Perhaps if someone on T-Mobile USA has successfully used the D810 WM6 ROM, I'd be willing to take a chance. I sure would like HTML capable email!
Click to expand...
Click to collapse
You just need a setup cab file for t-mobile's settings here in the US. I'm on cingular so I don't have one off hand, but let me search for ya...
http://forum.xda-developers.com/attachment.php?attachmentid=42298&d=1182761296
I think that's what you'll need... And of course you can always flash back to your original wm5 rom if needed...

Shadowmite said:
You just need a setup cab file for t-mobile's settings here in the US. I'm on cingular so I don't have one off hand, but let me search for ya...
http://forum.xda-developers.com/attachment.php?attachmentid=42298&d=1182761296
I think that's what you'll need... And of course you can always flash back to your original wm5 rom if needed...
Click to expand...
Click to collapse
Thank you, but all the settings are correct and everthing else (MMS, EMail, Internet, etc) works. The only setting I've found for SMS is the Service Center Number and that's correct. Receiving SMS works and sending works from some some areas - just not where I live.
So installing hard SPL and then flashing the non SPL ROM is all that's required to update to the D810 WM6 upgrade?

Yes, however after reading some of the posts here I question if the non-spl roms posted are in fact, non-spl roms. I will make a proper safe version of this update to flash when I get home in about an hour or so and post it up...
There are 2 others posted, but I don't know that they are safe as there were actually two spl's in the release and it's possible the posters only removed 1.

Shadowmite said:
Yes, however after reading some of the posts here I question if the non-spl roms posted are in fact, non-spl roms. I will make a proper safe version of this update to flash when I get home in about an hour or so and post it up...
There are 2 others posted, but I don't know that they are safe as there were actually two spl's in the release and it's possible the posters only removed 1.
Click to expand...
Click to collapse
I appreciate it. Maybe by then I'll have the nerve to try the upgrade.

Shadowmite said:
Yes, however after reading some of the posts here I question if the non-spl roms posted are in fact, non-spl roms. I will make a proper safe version of this update to flash when I get home in about an hour or so and post it up...
There are 2 others posted, but I don't know that they are safe as there were actually two spl's in the release and it's possible the posters only removed 1.
Click to expand...
Click to collapse
Thank you, that would be nice for all those P3600 owners that are getting into flashing trouble.

Any news?
Did anyone make a safe WM6 upgrade for p3600 yet?

read the posts! there are many wm6 roms overhere.

anybody know how to unlock softbank x02ht(HTC Cavalier)

i saw ebay selling unlock softbank x02ht,unlocked X02HT. There must be unlocking solution now.

maybe softbank doesn't lock their phones. My dopod c730 is from csl 1010 and is unlocked.

no, its locked

anyone knows?

There are many shops selling UNLOCKED X02HT in Hong Kong now.
There must be some method to unlock it.

I am also looking for unlocking solutions
reveil said:
There are many shops selling UNLOCKED X02HT in Hong Kong now.
There must be some method to unlock it.
Click to expand...
Click to collapse
Hey pal! same here, I am looking for unlocking solution for X02Ht but no luck.
I will try to update you guys once I see one..

Does unlocked X02HT sold in HKG have Japanese OS? Or Chinese OS? I would like to know it is real unlocked or overwritten ROM...

We can try if my excalibur *SIM* unlock works for cavalier. Please produce and post files according to the method described here.
Only one is enough.
If you guys want *CID* unlock, then maybe I can produce a USPL just as for Excalibur and Vox. In that case I also need a link to a Cavalier RUU.
JockyW

jocky...u r really a kindness guy....hope someone can offer the necessary file and make the cavalier unlock able....thanks in advance

jockyw2001 said:
We can try if my excalibur *SIM* unlock works for cavalier. Please produce and post files according to the method described here.
Only one is enough.
If you guys want *CID* unlock, then maybe I can produce a USPL just as for Excalibur and Vox. In that case I also need a link to a Cavalier RUU.
JockyW
Click to expand...
Click to collapse
Have you come up with the CID unlock for the Dopod C730(HTC Cavalier)? I have a Dopod C730 and for some reason the WIFI seemed to be disabled and can't be turned on at all. I want to put the WWE ROM to see if it's the ROM or the hardware that's crippling the WIFI, but the WWE RUU gives me the wrong vendor error.
The RUU can be found here: ftp://xda:[email protected]/Uploads/Smartphone/Cavalier/
The most recent ROM is 1.16.708.7. I want to install 1.16.707.7.
I will gladly donate for your troubles and I hope you can come up with the solution soon enough.

lynjo2k said:
Have you come up with the CID unlock for the Dopod C730(HTC Cavalier)? I have a Dopod C730 and for some reason the WIFI seemed to be disabled and can't be turned on at all. I want to put the WWE ROM to see if it's the ROM or the hardware that's crippling the WIFI, but the WWE RUU gives me the wrong vendor error
....
The most recent ROM is 1.16.708.7. I want to install 1.16.707.7.
I will gladly donate for your troubles and I hope you can come up with the solution soon enough.
Click to expand...
Click to collapse
I downloaded 1.16.707.7 and see if I can produce a "SSPL" which will allow you to flash any ROM. Will take a few days tho ...
JockyW

jockyw2001 said:
I downloaded 1.16.707.7 and see if I can produce a "SSPL" which will allow you to flash any ROM. Will take a few days tho ...
JockyW
Click to expand...
Click to collapse
Thank you for your troubles. I will be standing by.

FYI, there is now a dedicated Cavalier forum on xda-developers: http://forum.xda-developers.com/forumdisplay.php?f=414
Cheers

will pay money
will pay money to the great person who can find how to unlock x02ht ..somebody pl. help us....

jockyw2001 said:
We can try if my excalibur *SIM* unlock works for cavalier. Please produce and post files according to the method described here.
Only one is enough.
If you guys want *CID* unlock, then maybe I can produce a USPL just as for Excalibur and Vox. In that case I also need a link to a Cavalier RUU.
JockyW
Click to expand...
Click to collapse
C620？=C630W？

HI ALL I CAN GIVE CODE FOR X02HT FOR JUST 25 GBP 15 logs in just 20min contact me
[email protected]
[email protected]

Flash a rom

I know there is not yet such a way to flashing rom till today.
I have trying using both Vox and Excalibur USPL method to flash the rom. But is seems doesn't work.
Does anyone have any input with flash rom with Cavalier???

julianfong said:
I know there is not yet such a way to flashing rom till today.
I have trying using both Vox and Excalibur USPL method to flash the rom. But is seems doesn't work.
Does anyone have any input with flash rom with Cavalier???
Click to expand...
Click to collapse
Breeze and Cavalier have the same chipset (qualcom/samsung chipset which is same as hermes as far as I know), you should try with breeze/hermes tools. Vox and Excalibur have TI Omap chipset and thats why it will not work on Cavalier.
Anyway, if you try breeze/hermes methods do it on your own risk, you could brick your device you know!
Do serch the site as there is somewhere a thread where people had changed radio rom on breeze with pof's patched radio, but I'm not sure that it will work.
Cheers and good luck.

The pass few days I have also try the breeze and Hermes tools. Doesn't work.
In China, there is a guy saying can be unlock his Dopod C730 into supercid with some kind ActivePerl tools in here(Chinese Website)
But also don't work with my X02HT.

julianfong said:
The pass few days I have also try the breeze and Hermes tools. Doesn't work.
In China, there is a guy saying can be unlock his Dopod C730 into supercid with some kind ActivePerl tools in here(Chinese Website)
But also don't work with my X02HT.
Click to expand...
Click to collapse
Can you translate the procedure and attach tools?

Unlocking Hermes Extended_ROM with WM6

I'm trying to unlock the Ext.Rom but with no Luck. I know that the first suggestions will be to use the search funtion but I have done that. There are several Registry hacks and programs but none of them work. They only make it visible but write protection is still on so I can't change to contents.
I'm using the Hermes with an orginal German T-Mobile WM6 Rom.
Any suggestions?
Thankful for any help
Cheers

datas_brother said:
I'm trying to unlock the Ext.Rom but with no Luck. I know that the first suggestions will be to use the search funtion but I have done that. There are several Registry hacks and programs but none of them work. They only make it visible but write protection is still on so I can't change to contents.
I'm using the Hermes with an orginal German T-Mobile WM6 Rom.
Any suggestions?
Thankful for any help
Cheers
Click to expand...
Click to collapse
Did you take a look at the Wiki?
Did you soft reset after applying the tweak?
Eran

Hi Jocool,
yes to both questions. I've spent about 8 hours trying different solutions and programms with no success.
Cheers

is it SuperCID?

I'm using the Hermes with an orginal German T-Mobile WM6 Rom.
Seems NO SuperCID.

FileFixer said:
I'm using the Hermes with an orginal German T-Mobile WM6 Rom.
Seems NO SuperCID.
Click to expand...
Click to collapse
if I remember correctly it must be SuperCID to work.

Yep it ACTUALLY needs to be SuperCID i believe from WM6 onwards to have read/write access to the ext_rom. The tweak i believe only worked for everybody in WM5.
Use pof's unlocker to make it SuperCID if you really want access.

V12 VROD
mrvanx,
«V12 VROD»...
Where does it come from?
Where can I find details about it?
Where can i find it?
Cheers.

no, it's not Super CID. I'll try that and report back. Thank's for the info.
Cheers

Kevlar-Source said:
mrvanx,
«V12 VROD»...
Where does it come from?
Where can I find details about it?
Where can i find it?
Cheers.
Click to expand...
Click to collapse
V12........my 12th ROM version
VROD.....Vanx Rom Of Doom.
..........................................its a cracker

Hi,
thanks for the help. SuperCID was the problem. Now it works.
Cheers
DB

[ROM][WWE] Rogers Canada dumped ROM + OEMs

Hi guys... I'm new to this forum.
ROM (NBH):
http://www.4shared.com/file/154427585/bdcf0b87/RUU_Diamond_HTC_WWE_Rogers_1_93_631_8.html
OEM/SYS/XIP + SPL (for cooks):
http://myunspace.com/?d=6407B9061
(link now broken, may update if requested)
MAIN SPLASH SCREEN (with help from Mach2003):
http://forum.xda-developers.com/showpost.php?p=3740007&postcount=51
THIS IS FOR GSM PHONES ONLY, NOT CDMA
Information:
XIP = 19965
SYS = 19965
AKU = 1.2.3
SPL = 1.93.0000
ROM version: 1.93.631.8 WWE
ROM date: 10/30/08
Radio version: 1.00.25.06 [download from this thread]
NOTE (Jan. 11/09): To make Rogers Name Display work on other ROMs, you need to cook the attached rilphone.dll into the ROM. Also, you have to subscribe to Name Display on the Rogers network in Canada (of course).
.

hello there, can you please upload the ril.dll file as well as any other ril**.dll in your /windows. i'm trying to get the name display working on my diamond.
see related thread here.
http://forum.xda-developers.com/showthread.php?t=347882&highlight=rogers+display
i have been trying to get my name display working since May. as you can see in that thread there are alot of others also. i'm sure you would see quite a few donations if you could.
please take a look.
okthxbai!

Blazeitup123 said:
hello there, can you please upload the ril.dll file as well as any other ril**.dll in your /windows. i'm trying to get the name display working on my diamond.
see related thread here.
http://forum.xda-developers.com/showthread.php?t=347882&highlight=rogers+display
i have been trying to get my name display working since May. as you can see in that thread there are alot of others also. i'm sure you would see quite a few donations if you could.
please take a look.
okthxbai!
Click to expand...
Click to collapse
Yeah I know about the discussion because I was participating in it
They're all under the second link I just posted --- Check the OEM\OEMDRIVERS folder.

dsixda said:
Yeah I know about the discussion because I was participating in it
They're all under the second link I just posted --- Check the OEM\OEMDRIVERS folder.
Click to expand...
Click to collapse
lol, i didn't even realize. do you have any suggestions on how i can get this working? i have no idea and am far from a cook.
sorry for the question, i don't mean to hijack your thread. pm me if you wish.

Blazeitup123 said:
lol, i didn't even realize. do you have any suggestions on how i can get this working? i have no idea and am far from a cook.
sorry for the question, i don't mean to hijack your thread. pm me if you wish.
Click to expand...
Click to collapse
No problem, it's a relevant point because it's Rogers and only they support Name Display.
I think Trueg can help you out with that, he figured it out for the Elfins.

Actually try this:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"Dll"="rilphone.dll"
"Prefix"="RIL"
"Order"=dword:10
"Index"=dword:1
And then copy rilphone.dll

no luck there. still unknown

gsm rom
is it a gsm or cdma rom can we just flash with hardspl 1.40 oli

Dynomite232 said:
is it a gsm or cdma rom can we just flash with hardspl 1.40 oli
Click to expand...
Click to collapse
Rogers is GSM.. I used Hard SPL 1.93.

Blazeitup123 said:
no luck there. still unknown
Click to expand...
Click to collapse
IGONOR ABOVE STATEMENT.
IT WORKS!!!!
thank you sooo much!!!1!1one!!

Hi Blazeitup123
Could you summarize what you did and name display works
Did you use the new rilphone.dll from dsixda or the one your diamond had?
Actually it will be good if someone know how to create a cab
with the registry settings and the dlls
Thanks

dsixda said:
Actually try this:
Code:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\RIL]
"Dll"="rilphone.dll"
"Prefix"="RIL"
"Order"=dword:10
"Index"=dword:1
And then copy rilphone.dll
Click to expand...
Click to collapse
i copied the dll from internal storage to /windows with total commander. next looked in the reg, all entries existed and the only one i have to change was "Order"=dword from 16 to 10. soft reset, and it worked! simple
at first i was like o_0 then i was like ^_^ then i **** my pants! lol
i'm soo happy! i have had this phone since May and now its finally fully functional.

I dont know how name display is working in your diamond
but when I copied the dll to my windows folder i lost the radio
I could not start the gsm radio not even when i replaced the original
dll file I had.
Bottom line I had to reinstall a new ROM
By the way I use Dutty's ROMs
It happens twice to me

rogers splash anyone have it

belkre said:
rogers splash anyone have it
Click to expand...
Click to collapse
I'll try to upload it sometime later as soon as I figure it out.
You will likely have to use the itsutils tools (I used "pdocread" when I extracted it successfully for the Rogers Touch).

Roger HTC Diamond
To the author. Did you mange to unlock and put a cooked ROM on your Rogers HTC Diamond? Another thing is there a way to manually disable 3G connection on a Rogers HTC Diamond phone. I just got my Rogers branded Diamond and sold my EU/Asia Diam. In my opinion the EU/Asia is better than the US/Can version. The EU/Asia ver runs smoother and GPS works really well. With my new Rogers Diam, it's a little bit sluggish and acquiring GPS signal takes like 5mins. I'm thinking maybe debranding the phone and flashing a cooked ROM will fix it.
Thanks.

raidendb said:
To the author. Did you mange to unlock and put a cooked ROM on your Rogers HTC Diamond? Another thing is there a way to manually disable 3G connection on a Rogers HTC Diamond phone. I just got my Rogers branded Diamond and sold my EU/Asia Diam. In my opinion the EU/Asia is better than the US/Can version. The EU/Asia ver runs smoother and GPS works really well. With my new Rogers Diam, it's a little bit sluggish and acquiring GPS signal takes like 5mins. I'm thinking maybe debranding the phone and flashing a cooked ROM will fix it.
Thanks.
Click to expand...
Click to collapse
Yes, of course I can put a cooked ROM, because I restored this backup successfully, which itself is a cooked ROM because it is unsigned (and I also had to "cook" it with the SYS/OEM/XIP components). Dutty's ROM works as well.
Regarding the 3G connection thing, there is a thread on howardforums.com where trueg mentioned how to do it.
http://www.howardforums.com/showthread.php?t=1448329
I'm not sure about your GPS issue; it's probably your own issue. It only took me less than 30 seconds to get my first working signal.. which is just as good as my GlobalSat bluetooth one.

prince_72 said:
I dont know how name display is working in your diamond
but when I copied the dll to my windows folder i lost the radio
I could not start the gsm radio not even when i replaced the original
dll file I had.
Bottom line I had to reinstall a new ROM
By the way I use Dutty's ROMs
It happens twice to me
Click to expand...
Click to collapse
Are you on the Rogers network?

Hey there mate,
Rebuilded the rogers rom for myself as well and compared it to what you had built as well. I don't see ril*.dll in the OEM folder (searched all the dll's and did not see any ril*) [in mine or yours]
Is it really suppose to be there or ... i'm not doing something right?

D0MZE said:
Hey there mate,
Rebuilded the rogers rom for myself as well and compared it to what you had built as well. I don't see ril*.dll in the OEM folder (searched all the dll's and did not see any ril*) [in mine or yours]
Is it really suppose to be there or ... i'm not doing something right?
Click to expand...
Click to collapse
uncheck "hide system files and folders" in you folder view settings.